2AZOWADDI001DIADDI Block

[ⶎ㍲㠦㍲ ⲡ㰚 㧎㣿ⶎ㦚 Ṗ㪎 㡺Ệ⋮ 䟋㕂 䙂㧎䔎⯒ ṫ㫆䞮⓪ ὋṚ㦒⪲ ㌂㣿䟊 木㎎㣪. 㧊 䎣㓺䔎 ㌗㧦⓪ ⶎ㍲ 㠊ⓦ Ὁ㠦☚ ⊢㠊┺ ⏩㦚 㑮 㧞㔋┞┺.] Creamo Create Board : 6JKUKUCFGFKECVGFDQCTFVJCVCNNQYU[QWVQEJCTIG[QWT5OCTVDNQEMYKVJ CTGIWNCT.GIQDNQEM Subject to this certification FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Thisequipment complies with FCCradiation exposure limitsset forth for an uncontrolled environment.

C5266091_X8_Ed.1 Letter of Authorization Creamo inc Company: Creamo inc Address: 903AE, H-1, KIST, 5, Hwarang-Ro 14-Gil, Seongbuk-Gu, Seoul, South Korea Product Name: ADDI Block Model Number: Creamo-Addi-001 FCC Identifier: 2AZOWADDI001DI We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Ganghyun Cho Date: May.26.2021 Title: Director Signature of applicant: 1/1

C5266091_X10_Ed.2 Creamo inc Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: May.26.2021 Subject: Request for Confidentiality FCC ID: 2AZOWADDI001DI To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature: Name: Ganghyun Cho Title: Director 1/1

External Photos       FCC ID: 2A ZOWADDI001DI                    

ModelCreamo-Addi-001 FCC ID: 2AZOWADDI001DI Label Location

Internal Photos FCC ID: 2AZOWADDI001DI ATMEGA328P ANT

Shenzhen CTB Testing Co., Ltd. FCC ID: 2AZOWADDIOO1DI Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2.4G Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.41153.4792.234±15.003.16<50.982143.00YES Conclusion: For the max result: 0.98214 ≤ FCC Limit 3.0 for 1g SAR.

Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB210513022RFX TEST REPORT Compiled by: Reviewed by: Approved by: Arron Liu Bin Mei Rita Xiao / Director The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: ADDI Block FCC ID: 2AZOWADDI001DI Trademark: N/A Model Number: Creamo-Addi-001 Prepared For: Creamo inc Address: 903AE, H-1, KIST, 5, Hwarang-Ro 14-Gil, Seongbuk-Gu, Seoul, South Korea Manufacturer: Creamo inc Address: 903AE, H-1, KIST, 5, Hwarang-Ro 14-Gil, Seongbuk-Gu, Seoul, South Korea Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: Floor 1&2, Building A, No. 26 of Xinhe Road, Xinqiao Street, Baoan District, Shenzhen, China Sample Received Date: Apr. 22 , 2021 Sample tested Date: Apr. 22, 2021 to May. 20, 2021 Issue Date: May. 20, 2021 Report No.: CTB210513022RFX Test Standards FCC Part15.247 ANSI C63.10:2013 Test Results PASS Remark: This is Bluetooth radio test report. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 34 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB210513022RFX TABLE OF CONTENT Test Report Declaration Page 1. VERSION ...................................................................................................... 4 2. TEST SUMMARY ........................................................................................... 5 3. MEASUREMENT UNCERTAINTY .................................................................. 6 4. PRODUCT INFORMATION AND TEST SETUP ............................................... 7 4.1 Product Information ............................................................................................. 7 4.2 Test Setup Configuration ..................................................................................... 7 4.3 Support Equipment .............................................................................................. 7 4.4 Channel List ........................................................................................................ 8 4.5 Test Mode ........................................................................................................... 8 4.6 Test Environment ................................................................................................ 8 5. TEST FACILITY AND TEST INSTRUMENT USED .......................................... 9 5.1 Test Facility ......................................................................................................... 9 5.2 Test Instrument Used .......................................................................................... 9 6. AC POWER LINE CONDUCTED EMISSION ................................................... 11 6.1 Block Diagram Of Test Setup ............................................................................ 11 6.2 Limit ................................................................................................................... 11 6.3 Test procedure .................................................................................................. 11 6.4 Test Result ........................................................................................................ 13 7. RADIATED SPURIOUS EMISSION............................................................... 15 7.1 Block Diagram Of Test Setup ............................................................................ 15 7.2 Limit ................................................................................................................... 15 7.3 Test procedure .................................................................................................. 16 7.4 Test Result ........................................................................................................ 17 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS ................... 22 8.1 Block Diagram Of Test Setup ............................................................................ 22 8.2 Limit ................................................................................................................... 22 8.3 Test procedure .................................................................................................. 22 8.4 Test Result ........................................................................................................ 23 9. COUDUCTED OUTPUT POWER .................................................................. 25 9.1 Block Diagram Of Test Setup ............................................................................ 25 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 34 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB210513022RFX 9.2 Limit ................................................................................................................... 25 9.3 Test procedure .................................................................................................. 25 9.4 Test Result ........................................................................................................ 26 10. 6DB OCCUPIED BANDWIDTH ..................................................................... 27 10.1 Block Diagram Of Test Setup .......................................................................... 27 10.2 Limit ................................................................................................................. 27 10.3 Test procedure ................................................................................................ 27 10.4 Test Result ...................................................................................................... 27 11. POWER SPECTRAL DENSITY .................................................................... 29 11.1 Block Diagram …

Text truncated - open the document above for the full version.

Radiated Emission Below 1G Above 1G FCC ID: 2AZOWADDI001DI Conducted Emission