2AZVS-B600ARobot Vaccum Cleaner

6000/6500 English Sweeva 6000/6500 User Manual Deutsch Sweeva 6000/6500 Benutzerhandbuch 0 1 - 3 0 3 1 - 6 0 Español Manual del usuario de Sweeva 6000/6500 6 1 - 9 0 Français Manuel d'utilisation du Sweeva 6000/6500 9 1 - 121 Italiano Manuale d'uso Sweeva 6000/6500 122 - 152 EN Sweeva 6000/6500 User Manual Thank you for purchasing this product. Please read the user manual carefully before use, and keep it properly. 0 1 EN Sweeva 6000/6500 User Manual Contents 0 4 1. Safety Instructions Operational instructions Safety precautions About child safety About the battery Scope of use Disclaimers 2. Package Information 3. Product Description Button light interaction Introduction of main modules 0 8 0 9 4. Installation Instructions 1 3 5. APP Download and Network Operation (Optional) 1 6 6. Operating Instructions 1 8 2 2 7. Daily Maintenance Clean the dust box Clean the rolling brush Clean the side brush Clean the universal wheel Clean the charging electrode Clean up the dust channel Replace the dust bag Clean the sensor 8. Exceptions and Self-check 9. List of Faults 2 5 2 7 1 0. Technical Specifications 2 8 1 1. Environmental Statement (Optional) 2 9 1 2. Warranty Card 3 0 0 2 EN Thank you for choosing Sweeva 6000/6500 intelligent robot vacuum. We hope our product can bring about a better life for you! If you have any questions about the product during use, please call our service hotline: 4006-671-909 Please pay attention to the following basic safety precautions before using the product: Read the user manual carefully and follow the instructions in the user annual when using the product. Keep the user manual well for future reference. If you need to transfer the product to a third party, please attach the user manual along with the product. Appliances that are obviously damaged must not be operated. Any operation not in conformity to the instructions in the user manual may result in serious personal injury or damage to the product itself. If the user manual is missing, please contact your local dealer or call the after-sales service department to obtain an electronic user manual. Due to the constant improvement of the product, the actual product shall prevail. Our company reserves the right to update the product. website: www.tcl.com * 1. 2. 3. 4. 6. 5. 0 3 EN 0 4 Safety Instructions Scope of use Safety precautions Read the user manual carefully and use the product in accordance with the instructions in the manual to avoid damage due to improper operation. This product can only be used indoors for the cleaning of wooden floors, ceramic tiles and short-staple carpets. and can not be used on glass surfaceswater or reflective surfaces. Do not use the product in high - temperature , humid , flammable , explosive or corrosive environments. To prevent the product from falling accidentally, do not use this product in a suspended place without a protective fence, which may result in personal injury. WARNING—This product contains a UV-C emitter that can not be replaced, do not stare at the lamp. Improper use of the machine or damage to t he housing may cause UV-C leakage. Even small doses of UV-C radiation can cause damage to the eyes and skin. Before removing the safety protection accessories of t he UV-C lamp, please make sure that the power of the product is disconnected. This product can only adopt the adapter, battery and charging dock provided. Failure to do so may result in damage to the product. The user shall not replace the battery without authorization. If the main machine and accessories of this product are found to be damaged, please contact our service technicians for repair. Except for the service technicians designated or authorized by our company, no one may disassemble, repair or modify this product. Prevent the suction of water, oil or other liquids, which may damage the sweeper. Do not use this product to suck in sharp objects (e.g. shattered glass and nails) for fear of damage to the product. Before use, remove fragile objects, and arrange scattered wires on the floor for fear of affecting the normal operation of the sweeper. The charging dock and self-emptying dustbin shall be placed against the wall and on a flat floor. When the product is working, removal of the charging dock or self-emptying dustbin will affect the normal recharging of the machine. EN 0 5 Children under the age of 8 are not allowed to use this product. Persons with physical, sensory or intellectual disabilities or lack of relevant experience/knowledge cannot use the machine unless under supervision, operating instructions or awareness of the danger. Children are not allowed to play with the machine or clean/repair the machine unless under supervision. Children are not allowed to play with the product's packaging bag for fear of suffocation. Safety precautions About child safety Prevent clothing or any part of your body (hair, fingers, etc.) from getting caught in the brush or wheel of the sweeper. Failure to do so may result in personal injury. Unplug the product before maintenance. Do not touch the power plug or the product when your hands are wet, as this may result in electrical shock. A damaged power cord shall be replaced by the manufacturer, its service department or a similar professional to avoid danger. Unplug the charging dock if it remains unused for a long time. Appliances that are obviously damaged must not be operated. Safety Instructions EN 0 6 Under any of the following circumstances, the product will be excluded from the scope of free warranty, but paid repair can be provided: A. Damage due to the user’s failure to operate the product in strict accordance with our user manual or due to improper storage; B. The machine or parts have exceeded the free warranty period; C. Damage due to disassembly by those other than the maintenance personnel of our company or authorized by our company; D. A valid purchase voucher number cannot be provided; Safety Instructions About the battery Disclaimers Only t…

Text truncated - open the document above for the full version.

TCLOVERSEASMARKETINGLIMITED I,thesigner,DarongZhang Thetwomodelsareelectricallyidentical.ExceptmodelB600Awithdustremover, modelB600AandmodelB610Aaredifferentonlyinmodelname,otherelectronic structureandfunctionarethesame. ItemName：RobotVacuumCleaner ModelNumber:B600A AdditionalModel:B610A FCCID: 2AZVS-B600A <Signature> Name:DarongZhang Title:Manager Company:TCLOVERSEASMARKETINGLIMITED

ExternalPhotos M/N:B600A ExternalPhotos M/N:B600A ExternalPhotos M/N:B600A ExternalPhotos M/N:B600A PowerSupply ExternalPhotos M/N:B610A

B600A MADE IN CHINA 6000 24V 1A EPA 121A02B610A21216R000012 FCC ID

InternalPhotos M/N:B600A InternalPhotos M/N:B600A InternalPhotos M/N:B600A InternalPhotos M/N:B600A InternalPhotos M/N:B600A InternalPhotos M/N:B600A InternalPhotos M/N:B600A InternalPhotos M/N:B600A InternalPhotos M/N:B600A InternalPhotos M/N:B600A InternalPhotos M/N:B600A InternalPhotos M/N:B600A

FCC ID: 2AZVS-R600A EST Technology Co. ,Ltd Report No. ESTE-R2106157 Page 1 of 4 FCC 47 CFR MPE REPORT TCL OVERSEAS MARKETING LTD Robot Vacuum Cleaner Model Number: B600A Additional Model: B610A FCC ID: 2AZVS-B600A Prepared for: TCL OVERSEAS MARKETING LTD 7/F., BUILDING 22E, 22 SCIENCE PARK EAST AVENUE, HONG KONG SCIENCE PARK, SHATIN, HONG KONG Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2106157 Date of Test: May 27~Jul. 19, 2021 Date of Report: Jul. 22, 2021 FCC ID: 2AZVS-R600A EST Technology Co. ,Ltd Report No. ESTE-R2106157 Page 2 of 4 Maximum Permissible Exposure 1. Applicable Standards Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. 1.1. Limits for Maximum Permissible Exposure (MPE) (a) Limits for Occupational/Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times ︱E︱ 2 ,︱H︱ 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-10000 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times ︱E︱ 2 ,︱H︱ 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-10000 1.o 30 Note: f=frequency in MHz; *Plane-wave equivalent power density FCC ID: 2AZVS-R600A EST Technology Co. ,Ltd Report No. ESTE-R2106157 Page 3 of 4 1.2. MPE Calculation Method E (V/m) = d G×P×30 Power Density: Pd (W/m 2 ) = 377 E 2 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 2 d×377 G×P×30 From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained FCC ID: 2AZVS-R600A EST Technology Co. ,Ltd Report No. ESTE-R2106157 Page 4 of 4 2. Conducted Power Result Mode Frequency (MHz) Peak output power (dBm) Peak output power (mW) Target power (dBm) Antenna gain (dBi) (Linear) IEEE 802.11b 2412 16.82 0.0481 16 ±2 3.2 2.089 2437 16.85 0.0484 16±2 3.2 2.089 2462 16.83 0.0482 16±2 3.2 2.089 IEEE 802.11g 2412 21.73 0.1489 21 ±2 3.2 2.089 2437 21.79 0.1510 21±2 3.2 2.089 2462 21.76 0.1500 21±2 3.2 2.089 IEEE 802.11n HT20 2412 21.74 0.1493 21 ±2 3.2 2.089 2437 21.76 0.1500 21±2 3.2 2.089 2462 21.83 0.1524 21±2 3.2 2.089 IEEE 802.11n HT40 2422 17.34 0.0542 17 ±2 3.2 2.089 2437 17.35 0.0543 17±2 3.2 2.089 2452 17.35 0.0543 17±2 3.2 2.089 3. Calculated Result and Limit Mode Target power (dBm) Antenna gain Power Density (S) (mW/cm 2 ) Limited of Power Density (S) (mW/cm 2 ) Test Result (dBi) (Linear) 2.4G Band IEEE 802.11b 18 3.2 2.0890.0262 1 Complies IEEE 802.11g 23 3.2 2.0890.0829 1 Complies IEEE 802.11n HT20 23 3.2 2.0890.0829 1 Complies IEEE 802.11n HT40 19 3.2 2.0890.0330 1 Complies End of Test Report

FCC ID: 2AZVS-B600A EST Technology Co., Ltd Report No. ESTE-R2106156 Page 1 of 97 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of TCL OVERSEAS MARKETING LIMITED Robot Vacuum Cleaner Model Number: B600A Additional Model: B610A FCC ID:2AZVS-B600A Prepared for: TCL OVERSEAS MARKETING LIMITED 7/F BUILDING 22E 22 SCIENCE PARK EAST AVENUE HONG KONG SCIENCE PARK SHATIN NTHONG KONG China Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2106156 Date of Test: May 27~Jul. 19, 2021 Date of Report: Jul. 22, 2021 FCC ID: 2AZVS-B600A EST Technology Co., Ltd Report No. ESTE-R2106156 Page 2 of 97 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION......................................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................. 5 1.1. Description of Device (EUT) ........................................................................................................... 5 1.2. Antenna Information ........................................................................................................................ 5 2. SUMMARY OF TEST ......................................................................................................................... 6 2.1. Summary of test result ...................................................................................................................... 6 2.2. Test Facilities ................................................................................................................................... 7 2.3. Measurement uncertainty ................................................................................................................. 8 2.4. Assistant equipment used for test ..................................................................................................... 8 2.5. Block Diagram ................................................................................................................................. 8 2.6. Test Mode ......................................................................................................................................... 9 2.7. Power Setting of Test Software ...................................................................................................... 10 2.8. Duty Cycle ...................................................................................................................................... 10 2.9. Channel List ................................................................................................................................... 13 2.10. Test Equipment List ....................................................................................................................... 14 3. 6DB BANDWIDTH .......................................................................................................................... 15 3.1. Limit ............................................................................................................................................... 15 3.2. Test Setup ....................................................................................................................................... 15 3.3. Spectrum Analyzer Setting ............................................................................................................. 15 3.4. Test Procedure ................................................................................................................................ 15 3.5. Test Result ...................................................................................................................................... 16 4. MAXIMUM PEAK OUTPUT POWER ................................................................................................. 25 4.1. Limit ............................................................................................................................................... 25 4.2. Test Setup ....................................................................................................................................... 25 4.3. Spectrum Analyzer Setting ............................................................................................................. 25 4.4. Test Procedure ................................................................................................................................ 25 4.5. Test Result ...................................................................................................................................... 26 5. POWER SPECTRAL DENSITY .......................................................................................................... 35 5.1. Limit ............................................................................................................................................... 35 5.2. Test Setup ....................................................................................................................................... 35 5.3. Spectrum Analyzer Setting ............................................................................................................. 35 5.4. Test Procedure ................................................................................................................................ 35 5.5. Test Result ...................................................................................................................................... 36 6. CONDUCTED BAND EDGE ............................................................................................................. 45 6.1. Limit ............................................................................................................................................... 45 6.2. Test Setup .......................................…

Text truncated - open the document above for the full version.

TESTSETUPPHOTO ConductedTest RadiatedTest(Below1GHz) RadiatedTest(Above1GHz)