2BA67-ABS1802Party Karaoke Speaker

12 FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator &you body. 34 SY SPEAKER 56 FCC ID:2BA67-ABS1802(For Speaker) FCC ID:2BA67-ZQSMIC(For Microphone) Paired for use.

Shenzhen Sing-E Intl Development Co., Ltd Add: 208, Bldg a, Maker center, Enterprise business network, Huarong Road, Dalang, Longhua Dist., Shenzhen,China Tel: +86-18565678273 Email: [email protected] Date: 2023-11-14 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Shenzhen Sing-E Intl Development Co., Ltd, hereby authorize China Certification ICT Co., Ltd (Dongguan). to act as a laboratory for testing and test report generation for the following project(s): (Product description: Party Karaoke Speaker, model name: ABS-1802 ,ABS-6101, ABS-6102,ABS-6102, ABS-1402, ABS-1406, ABS-1407, VWIN-1/2137, FCC ID: 2BA67-ABS1802) The product supports BDR(GFSK), EDR(π/4-DQPSK, 8DPSK), but for this device, only EDR(π/4-DQPSK, 8DPSK) w as active, the others were disabled by software, the end user has no capability to activate it. Also,the microphone only has receive function. Sincerely, Signature: Printed Name: Vincent Liu Title: Manager

Shenzhen Sing-E Intl Development Co., Ltd Add: 208, Bldg a, Maker center, Enterprise business network, Huarong Road, Dalang, Longhua Dist., Shenzhen,China Tel: +86-18565678273 Email: [email protected] DECLARATION OF SIMILARITY Date: 2023- 11-14 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, Shenzhen Sing-E Intl Development Co., Ltd, hereby declare that the product: Party Karaoke Speaker, FCC ID: 2BA67-ABS1802, model: ABS-6101, ABS-6102, ABS-1402, ABS-1406, ABS-1407, VWIN-1/2137 are electrically identical with the model: ABS-1802 which was tested by China Certification ICT Co., Ltd (Dongguan) with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between those models and that are declared similar are as follows: They are the same product, and just the different model name, the rest are the same. Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Vincent Liu Title: Manager

Shenzhen Sing-E Intl Development Co., Ltd Date：2023-11-14 Product Model Number: FCC ID ：2BA67-ABS1802 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out byORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Title: Manager Email: [email protected] Telephone: +86-18565678273 On behalf of: Shenzhen Sing-E Intl Development Co., Ltd

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-EXP Page 1 of 4 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-EXP Page 2 of 4 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-EXP Page 3 of 4 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-EXP Page 4 of 4 Port

Manufacturer:WMD CIRCUITS LIMITED Add：B2-1, Building B2, Fuyuan Industrial Park, Tangwei, Fuyong Street, Baoan District, Shenzhen Antenna Type PCB Antenna Length 15.2*5.7mm

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-00A Page 62 of 64 5. RF EXPOSURE EVALUATION 5.1 Applicable Standard FCC §15.247 (i) and subpart §1.1307 Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. 5.2 Procedure According to §1.1307(b)(3)(i) (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). Table 1 to § 1.1307(b)(3)(i)(C) - Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . 5.3 Measurement Result Radio Frequency (MHz) λ/2Π (mm) Distance (mm) Exemption ERP (mW) Maximum Conducted Power including Tune-up Tolerance (dBm) Antenna Gain (dBi) ERP dBmmW BT 2405-2480 19.87 200 768 1 -0.58 -1.73 0.67 Note: The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. Result: The device compliant the MPE-Based Exemption at 20cm distances.

TEST REPORT Applicant: Shenzhen Sing-E Intl Development Co., Ltd Address: 208, Bldg a, Maker center, Enterprise business network, Huarong Road, Dalang, Longhua Dist., Shenzhen,China FCC ID: 2BA67-ABS1802 Product Name: Party Karaoke Speaker Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230955881-00A Date Of Issue: 2023/11/28 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-00A Page 2 of 64 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-00A Page 3 of 64 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 12 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATED SPURIOUS EMISSIONS ...................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 15 3.2.4 Test Procedure ............................................................................................................................................. 15 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 16 3.3 20 DB EMISSION BANDWIDTH ........................................................................................................... 17 3.3.1 Applicable Standard ..................................................................................................................................... 17 3.3.2 EUT Setup................................................…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-00A-TSP TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-00A-TSP Radiated Emission Below 1GHz View Radiated Emission Below 1GHz View Parallel China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-00A-TSP Radiated Emission Below 1GHz View Per pendicular Radiated Emission Below 1GHz View Ground-parallel China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955881-00A-TSP Radiated Emission Above 1GHz View