2BA6H-OCSLRF Remote Controller

Features 1, All-in-one design LED solar street light, slim and simple style, easy to install. 2, Support multi installation methods with different installation accessories. 3, Intelligent PIR sensor, 120°detection angle and 8-10M detection area, the light will turn on automatically when <8LUX. 4, Support changing 2 working modes by switch, and 3 working modes by remote control to save energy. 5, Free to tilt the lamp 20° up and 10° down to get the best sun exposure. 6, Use high quality mono-crystalline silicon solar panel with tempered glass laminated, 23% photoelectric conversion rate. 7, Use 32700 LiFePO4 batteries, which have a large charge storage capacity during energy conversion, 2000 charge-dis- charge cycles, overcharge protection, over-discharge protection, short circuit protection, inflation & explosion protection. 8, High quality ABS materials, anti-UV, long life span. SPECIFICATIONS LED SOLAR STREET LIGHT 8W-15W-40W WITH REMOTE CONTROL Product Model: Power: Lumens: LEDs: Solar Panel: Battery: Charging Time: Run Time: Induction mode: Working Modes: PIR Sensor Detection: Beam Angle: IP Degree: Housing Color: Housing Material: Working Temperature: Storage Temperature: Dimension: Weight: OC-SL-010A 10W 1500LM6200LM 2700LM SMD2835*40pcs 5V/7.4Wp, mono-crystalline silicon solar panel 32700 LiFePO 4 batteries, 6000mAh/3.2V 32700 LiFePO 4 batteries, 12000mAh/9.6V 4 hours Up to 3 nights Light control+Motion sensor+Remote control 120°detection angle and 8-10M detection area Remote control Detection: 10-15M 70°x140° IP65 Black ABS+Iron -20°C~45°C -20°C~45°C 413*182*51mm 1.66Kg OC-SL-040AOC-SL-015A 40W15W SMD2835*96pcsSMD2835*40pcs 13.5V/21Wp, mono-crystalline silicon solar panel 32700 LiFePO 4 batteries, 6000mAh/6.4V 9V/10Wp, mono-crystalline silicon solar panel 3 working modes 680*270*61mm473*209*51mm 4.7Kg2.07Kg PRODUCT DIMENSION PIR Sensor Detection: 120°detection angle and 10M detection area 2.5M 10M 8M OPERATION GUIDE The default mode of the product is OFF mode. Press the back button to adjust modes when using the light: Suggest Installation Height 120°120° 830mm 401mm 209mm 570mm 1000mm 270mm 87mm 50mm ● 1st press for Mode 1 ● 2nd press for Mode 2 ● 3rd press for Mode 3 ● 4th press for OFF 10W15W40W ON/OFF Model 1 Model 2 Model 3 Note: You also can change the working mode by remote control after the installation. Working mode1 The lamp flashing when 1st pressing the switch. Lamp turns into full light for human detection. 25 seconds after human left. lamps turn into half light until daytime. 50mm 473mm680mm 209mm 270mm 51mm 61mm 120° Working mode2 The lamp double flashing when 2nd pressing the switch. Lamp turns into full light for human detection. 25 seconds after human left. lamps turn off until daytime. Working mode3 The lamp triple flashing when 3rd pressing the switch. Lamp turns into full light for 6 hours. 6 hours later, the lamp turns into Working Mode 1 automatically, lamps turn off until daytime. 120° 120°120° 120° INSTALLATION Press the button and select a desired mode then choose a place that can get enough sunshine to install the light, the more sunshine it gets the longer it can illuminate. Step 1 : Drill a hole with an 8MM hammer drill, and hammer the expansion screw into the hole with a hammer. Recommended installa- tion height ( 2.5-3 meters above theground). If it needs to be installed on the pole, insert the hoop into the hole of the light pole and then onto the electric pole. Finally, use a screwdriver to lock the hoop. Step 2 : Insert the cross arm of the lamp pole into the hole of the tail cover of the lamp, and fix the outer collar tightly with 2 bolts. Step 3 : The expansion screw to fix the bracket; Press the switch. select the function you need, the installation is complete. 1 2 bolts. Switch 3 Embrace hoop Pole 6H Later Working Mode 1 LED SOLAR STREET LIGHT WITH LAMP-POST Tips 1. It is recommended to turn off the light and charge it under direct sunlight for1-2 days before the first use. Make sure the product has enough power. 2. During the installation, please make sure the landscape light is installed under direct sunlight where there is no shade or eave to shelter the solar panel. Otherwise, the lighting time will be shorter. 3. Whether the solar landscape light can produce the best lighting effect or not depends on sunlight intensity, geographical location, weather conditions, seasons and other conditions. 4. Please follow the installation instruction to operate correctly. Shenzhen OECO Technology Co.,Ltd +86 755 28455752 Add: Building 5, Mashaxuda Hi-Tech Industrial Park, Pingdi Street, Longgang District, Shenzhen, China www.oecotech.com APPLICATION Drill holes with a 6mm impact drill, then hammer the expansion screws into the hole with a hammer, then fix the lamp on the expansion screw and lock it; Press the switch key to make the light entering the power-on status, and select the desired working mode with the switch button or the remote control, then the installation is completed. Suggested installation height(10W/15W:3m-5m above the ground) （40W：4m-6m above the ground) Step 1: Use a 6-angle wrench to fasten the hoop to the U-shaped bracket with 4 bolts; Step2: Adjust the lamp to the desired angle and fix the left and right sides with locking the 4 screws; Press the red switch key to make the light entering the power-on status. Then select the desired working mode with the switch button or the remote controland, the installation is complete. Recommended installation height (10W/15W:3m-5m above the ground) （40W： 4m-6m above the ground) 1 hoop Wall MountedPole Mounted Driveways, Patios, Backyards and Pool Areas, Landscapes and Gardens, Perimeter Walls, Streets around the house, Poles, Garage, Emergency exits, Entrances LED SOLAR STREET LIGHT WITH U-SHAPE BRACKET PACKAGE Product Model OC-SL-010A1 pack1.86460*215*83511.3475*230*435 2.24 5.00 510*235*83 692*302*88 5 3 13.2 15.0 525*250*435 704*290*314 1 pack 1 pack OC-SL-015A OC-SL-040A PCS/BOXG.W./BOX(…

Text truncated - open the document above for the full version.

ShenZhenOECOtechnologyCo.,Ltd 2023-06-09 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID: 2BA6H-OCSL ) [ShenZhenOECOtechnologyCo.,Ltd](“theapplicant”)certifiesthattheequipmentfor whichauthorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Sincerely, ZhiyongLiu R&dmanager ShenZhenOECOtechnologyCo.,Ltd Floor2,buiding5,mashaxidahitechndustrialPark,Gaoqiaocommunity,Pingdistreet,Longgang District,ShengzhenCity,GuangdongProvince ShenZhenOECOtechnologyCo.,Ltd 2023-06-09 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID:2BA6H-OCSL) [ShenZhenOECOtechnologyCo.,Ltd](“theapplicant”)certifiesthat,asofthedateof thefilingoftheapplication,theapplicantisnotidentifiedontheCoveredListasan entityproducing“covered”equipment. Sincerely, ZhiyongLiu R&dmanager ShenZhenOECOtechnologyCo.,Ltd Floor2,buiding5,mashaxidahitechndustrialPark,Gaoqiaocommunity,Pingdistreet,Longgang District,ShengzhenCity,GuangdongProvince

Attestation Statements (2023-05-29) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2BA6H-OCSL，FRN：0033767880) (ShenZhen OECO technology Co.,Ltd), the undersigned, hereby authorize (Lucky Cowboy Global Services, LLC) to act as our designated U.S. agent for service of process, (ShenZhen OECO technology Co.,Ltd) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (Lucky Cowboy Global Services, LLC) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company name: ShenZhen OECO technology Co.,Ltd Contact Name: Zhi yong Liu Address: Floor2,buiding5,mashaxida hi techndustrial Park, Gaoqiao community,Pingdi street,Longgang District,Shengzhen City,Guangdong Province Telephone No: 18820252759 Email: [email protected] Signature [Zhi yong Liu] U.S. Agent Information: Company Name: Lucky Cowboy Global Services, LLC Address: 2213 S. Braeswood Blvd. #12E Houston, TX 77030 USA FRN: 0033510934 Contact Name: Louie Liu Telephone No: +1 (713) 992-3369 Email: [email protected] Signature [Louie Liu]

Declarationonmodeldifferenc ShenZhen OECO technology Co., Ltd e Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethe sameRFmoduleandantenna,PCBlayout,schematicsandcomponent.Onlythemodelsnameare different. ProductionnameTrademark FCCID RF Remote Controller 2BA N/A 6H-OCSL Model no. OC-SL-015A, OC-SL-010A Sincerely, Zhi yong Liu R&d manager ShenZhen OECO technology Co., Ltd Floor2,buiding5,mashaxida hi techndustrial Park, Gaoqiao community,Pingdi street, Longgang District,Shengzhen City,Guangdong Province

ShenZhenOECOtechnologyCo.,Ltd 2023-06-09 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeDongGuanAnciElectronicTechnologyCo.,Ltd.toacton ourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthesigning ofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, ZhiyongLiu R&dmanager ShenZhenOECOtechnologyCo.,Ltd Floor2,buiding5,mashaxidahitechndustrialPark,Gaoqiaocommunity,Pingdistreet,Longgang District,ShengzhenCity,GuangdongProvince

ShenZhenOECOtechnologyCo.,Ltd 2023-06-09 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:CONFIDENTIALITYREQUESTFOR(EUTName:RFRemoteController /Model:OC-SL-015A,OC-SL-010A/FCCID:2BA6H-OCSL) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe(BlockDiagram,Operational Description,Schematics)requiredtobesubmittedwiththisapplicationbepermanently withheldfrompublicreview. Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, ZhiyongLiu R&dmanager ShenZhenOECOtechnologyCo.,Ltd Floor2,buiding5,mashaxidahitechndustrialPark,Gaoqiaocommunity,Pingdistreet,Longgang District,ShengzhenCity,GuangdongProvince

External

Productname：RF RemoteController ModelNumbe:OC-SL-015A Input：Battery3VDC FCCID ：2BA6H-OCSL Manufacturer：ShenZhenOECOtechnologyCo.,Ltd

RF exposure Estimation Introduction OC-SL-015A (FCC ID: 2BA6H-OCSL) is a RF Remote Controller operating at 433.92MHz. 1. Limit and Guidelines on Exposure to Electromagnetic Fields According to 4.3 General SAR test exclusion guidance of KDB 447498 RF Exposure, no SAR required if power is lower than the flowing threshold: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation25 • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.3 is applied to determine SAR test exclusion. 2. Calculation method [(max. power of` channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 According to ANSI C63.10-2013 (9.5 Equations to calculate EIRP), For 433.92MHz. Field Strength (EMeas): 63.50 (dBuV/m) (f=433.92 MHz) Measurement Distance(dMeas): 3 (m) Equivalent Isotropically Radiated Power(EIRP): 0.00067 (mW) Radiated Power + tune up tolerance = 0.00067 (mW) Distance = 5 mm f = 433.92MHz [0.00067/5] * SQRT(0.43392) =0.000088 0.000088 ≤ 3.0 Therefore, excluded from SAR testing. Signaturer Tiger Xu Date: 2023-06-29

TRF No.: 01-R006-3A TRF Originator: GTG TRF Date: 2022-06-29 Web: www.gtggroup.com E-mail: [email protected] Tel.: 86-400 755 8988 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT FCC PART 15 SUBPART C REQUIREMENT OF RF Remote Controller Model No.: OC-SL-015A, OC-SL-010A Trademark: N/A FCC ID: 2BA6H-OCSL Report No.: E01A23040842F00101 Issue Date: June 29, 2023 Prepared for ShenZhen OECO technology Co., Ltd Floor2, buiding5, mashaxida hi techndustrial Park, Gaoqiao community, Pingdi street, Longgang District, Shengzhen City, Guangdong Province Prepared by Dong Guan Anci Electronic Technology Co., Ltd. 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan, Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. This report shall not be reproduced, except in full, without the written approval of Dong Guan Anci Electronic Technology Co., Ltd. 1 of 32 Report No.: E01A23040842F00101 TRF No.: 01-R006-3A Global Testing , Great Quality. VERIFICATION OF COMPLIANCE Applicant: ShenZhen OECO technology Co., Ltd Floor2, buiding5, mashaxida hi techndustrial Park, Gaoqiao community, Pingdi street, Longgang District, Shengzhen City, Guangdong Province Manufacturer: ShenZhen OECO technology Co., Ltd Floor2, buiding5, mashaxida hi techndustrial Park, Gaoqiao community, Pingdi street, Longgang District, Shengzhen City, Guangdong Province Product Description: RF Remote Controller Trade Mark: N/A Model Number: OC-SL-015A, OC-SL-010A (All models are the same except the model name, We choose model OC-SL-015A to do all tests.) Sample number: A23040842 002 We hereby certify that: The above equipment was tested by Dong Guan Anci Electronic Technology Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.231(2022). Date of Test : May 22, 2023 Prepared by : Duke Liu/Editor Reviewer & Approved : Tiger Xu/ Supervisor 2 of 32 Report No.: E01A23040842F00101 TRF No.: 01-R006-3A Global Testing , Great Quality. Modified Information Versio n Summary Revision Date Report No. Ver.1.0 Original Report / E01A23040842F00101 3 of 32 Report No.: E01A23040842F00101 TRF No.: 01-R006-3A Global Testing , Great Quality. Table of Contents 1 EUT TECHNICAL DESCRIPTION ..................................................................................... 4 2 SUMMARY OF TEST RESULT............................................................................................ 5 3 TEST METHODOLOGY......................................................................................................... 6 3.1 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................................................ 6 3.2 MEASUREMENT EQUIPMENT USED ............................................................................................. 6 3.3 DESCRIPTION OF TEST MODES .................................................................................................... 6 4 FACILITIES AND ACCREDITATIONS ............................................................................... 7 4.1 FACILITIES............................................................................................................................................ 7 4.2 LABORATORY ACCREDITATIONS AND LISTINGS ..................................................................... 7 5 TEST SYSTEM UNCERTAINTY .......................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ............................................................................ 9 6.1 RADIO FREQUENCY TEST SETUP 1 ................................................................................................. 9 6.2 RADIO FREQUENCY TEST SETUP 2 ................................................................................................. 9 6.3 CONDUCTED EMISSION TEST SETUP ........................................................................................... 10 6.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ........................................................... 11 6.5 SUPPORT EQUIPMENT ..................................................................................................................... 11 7 TEST REQUIREMENTS ...................................................................................................... 12 7.1 OCCUPIED BANDWIDTH ................................................................................................................. 12 7.2 RADIATED SPURIOUS EMISSION ................................................................................................... 14 7.3 RADIATED MEASUREMENT PHOTOS: ................................................................................................... 25 7.4 TRANSMISSION REQUIREMENT .................................................................................................. 26 7.5 ANTENNA APPLICATION ........................................................................................................................ 28 4 of 32 Report No.: E01A23040842F00101 TRF No.: 01-R006-3A Global Testing , Great Quality. 1 EUT TECHNICAL DESCRIPTION Characteristics Description Device Type: RF Remote Controller Modulation: ASK Operating Frequency Range(s): 433.92MHz Number of Channels: 1 channel Antenna Type : PCB antenna Antenna Gain: Only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions so antenna gain information is not required Power supply: Battery 3Vdc Date of Sample Received: May 21, 2023 Note: for more details, please refer to the User’s manual of the EUT. The EUT has been associated with peripherals pursuant to ANSI C63.10-2013 and configuration operated in a manner tended to maximize its emission characteristi…

Text truncated - open the document above for the full version.

Free: 433.92MHz Modu lation: ASK standby current： <1uA Operating current： 9mA operating voltage： 3V Antenna Dimension(mm) A: 22 ± 0.5 B: 30 ± 0.5 C: 31± 0.5 D: 74 ± 0.5 E: 31 ± 0.5 A B C D E