2BA6K-VP-ONESmart Table Lamp (wireless type)

Technical Parameters Items Model Wattage Dimmable (Yes/No) Color Temperature Color Rendering Index Luminous Flux (Lm))-0H >95 10-170lm 3000K~6000K Input Battery Capacity (mAh) Lighting Time (Hours) Charge Time (Hours) Lifetime (Hours) IP RatingIP 54 Aluminum alloy + PC Ø93mm×H309mm Product Material Product Dimension (mm) 7H-60H 10000H 4000mAh 5H 5V2A Ye s 0.5-4W VP-One Parameters 1. For the first time to use this product, please fully charge this product before using it. 2. Please avoid placing this product in a high temperature or humid environment. 3. Please place the product away from fire or explosives. 4. Do not use charging equipment with a voltage greater than 5V to charge this product. Type-C Charging port Wireless Charging Pad Touch Switch Attention Product Features • Smart Table Lamp • Wireless Charging Pad • Type-C Charging Cable • User Manual Hidden switch: There is no obvious key switch. The touch switch is hidden on the metal lamp cover. Touching any place of the entire metal lamp cover will trigger the switch and make the table lamp enter the working state. Touch Switch Description Short press: Short press to power on - warm light (3000K) - white light (6000K) - warm white light (4500K) - shutdown, cycle in sequence. Long press: Long press the stepless button to adjust the light brightness. The first long press stepless adjustment increases the light brightness, and the second long press stepless adjustment decreases the light brightness. Memory function: It can remember the set light brightness, and keep the set light brightness when you turn on the lamp next time. User Manual Package Contents Three color temperature adjustments: The table lamp has three lighting modes of white light, warm light and warm white light, and the color temperature of the light can be adjusted according to the needs. Stepless dimming: Continuous light brightness adjustment can better meet your various lighting needs. Wireless charging: Get rid of the trouble of plugging in and charging. Use the wireless charging base to charge the table lamp, after charging, you can use it at any time, or place it on the charging base, and continue to use the table lamp while charging.At the same time, the charging base supports charging of mobile phones that can charge wirelessly. Smart Table Lamp This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning 无线款说明书

Manager

-ShenzhenSunperOptoCo.,Ltd- TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB986446D01. FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 6/29/23 Towhomitmayconcern: We,[ShenzhenSunperOptoCo.,Ltd],herebycertifythattheequipmentforwhichauthorizationis sought(FCCID:[2BA6K-VP-ONE])isnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuantto§2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,wearenotidentifiedontheCovered List(https://www.fcc.gov/supplychain/coveredlist)asanentityproducing“covered”equipment. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirements listedunder§2.911(b)and(d)(5)and(6). Sincerely, Signature [CHONGZENGLU] [Engineer] [ShenzhenSunperOptoCo.,Ltd] 6 2 _ [ m o d e l ] C o v e r e d E q u _ 2 . 9 1 1 ( d ) ( 5 ) ( i ) a n d ( i i ) - U , V 0 2

ProjectNo.:18220WC300828Page1of4 Code:AB-RF-05-b AppendixII--ExternalPhotograph ProjectNo.:18220WC300828Page2of4 Code:AB-RF-05-b ProjectNo.:18220WC300828Page3of4 Code:AB-RF-05-b ProjectNo.:18220WC300828Page4of4 Code:AB-RF-05-b

LabelLocationOnEUT Label ProductName:SmartTableLamp(wirelesstype) ModelNo.:VP-One FCCID:2BA6K-VP-ONE

ProjectNo.:18220WC300828Page1of3 Code:AB-RF-05-b AppendixIII--InternalPhotograph ANT ProjectNo.:18220WC300828Page2of3 Code:AB-RF-05-b ProjectNo.:18220WC300828Page3of3 Code:AB-RF-05-b

ReportNo.:18220WC30082801FCCID:2BA6K-VP-ONEPage1of21 Code:AB-RF-05-b FCCTestReport Applicant:ShenzhenSunperOptoCo.,Ltd Address: 5/F,BlockC,SanminIndustrialPark,Shiyan Street,Bao'anDistrict,518108,Shenzhen, Guangdong,China ProductName:SmartTableLamp(wirelesstype) ReportDate:Jun.29,2023 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC30082801FCCID:2BA6K-VP-ONEPage2of21 Code:AB-RF-05-b Contents 1.GeneralInformation...........................................................................................................................................5 1.1.ClientInformation....................................................................................................................................5 1.2.DescriptionofDevice(EUT)..................................................................................................................5 1.3.AuxiliaryEquipmentUsedDuringTest................................................................................................6 1.4.DescriptionofTestModes.....................................................................................................................6 1.5.DescriptionOfTestSetup......................................................................................................................7 1.6.TestEquipmentList.................................................................................................................................8 1.7.MeasurementUncertainty.....................................................................................................................9 1.8.DescriptionofTestFacility.....................................................................................................................9 2.SummaryofTestResults................................................................................................................................10 3.ConductedEmissionTest................................................................................................................................11 3.1.TestStandardandLimit.......................................................................................................................11 3.2.TestSetup...............................................................................................................................................11 3.3.TestProcedure.......................................................................................................................................11 3.4.TestData.................................................................................................................................................11 4.RadiationSpuriousEmission.........................................................................................................................14 4.1.TestStandardandLimit.......................................................................................................................14 4.2.TestSetup...............................................................................................................................................14 4.3.TestProcedure.......................................................................................................................................15 4.4.TestData.................................................................................................................................................15 5.AntennaRequirement......................................................................................................................................20 5.1.TestStandardandRequirement.........................................................................................................20 5.2.AntennaConnectedConstruction......................................................................................................20 APPENDIXI--TESTSETUPPHOTOGRAPH................................................................................................21 APPENDIXII--EXTERNALPHOTOGRAPH..................................................................................................21 APPENDIXIII--INTERNALPHOTOGRAPH..................................................................................................21 ReportNo.:18220WC30082801FCCID:2BA6K-VP-ONEPage3of21 Code:AB-RF-05-b TESTREPORT Applicant:ShenzhenSunperOptoCo.,Ltd Manufacturer:ShenzhenSunperOptoCo.,Ltd ProductName:SmartTableLamp(wirelesstype) ModelNo.:VP-One TradeMark: Rating(s): Input:5V⎓3A Wirelessoutput:15W TestStandard(s): FCCPart15SubpartC,Paragraph15.209 TestMethod(s): ANSIC63.10:2020 ThedevicedescribedaboveistestedbyShenzhenAnbotekComplianceLaboratoryLimitedto determinethemaximumemissionlevelsemanatingfromthedeviceandtheseverelevelsofthedevice canendureanditsperformancecriterion.Themeasurementresultsarecontainedinthistestreportand ShenzhenAnbotekComplianceLaboratoryLimitedisassumedfullofresponsibilityfortheaccuracy andcompletenessofthesemeasurements.Also,thisreportshowsthattheEUT(EquipmentUnder Test)istechnicallycompliantwiththeFCCPart15SubpartCrequirements. Thisreportappliestoabovetestedsampleonlyandshallnotbereproducedinpartwithoutwritten approvalofShenzhenAnbotekComplianceLaboratoryLimited. DateofReceiptMay11,2023 DateofTestMay11~19,2023 PreparedBy (EllaLiang) Approved&AuthorizedSigner (KingkongJin) ReportNo.:18220WC30082801FCCID:2BA6K-VP-ONEPage4of21 Code:AB-RF-05-b RevisionHistory ReportVersionDescriptionIssuedDate R00OriginalIssue.Jun.29,2023 ReportNo.:18220WC30082801FCCID:2BA6K-VP-ONEPage5of21 Code:AB-RF-05-b 1.GeneralInformation 1.1.ClientInformation Applicant:ShenzhenSunperOptoCo.,Ltd Address: 5/F,BlockC,SanminIndustrialPark,ShiyanStreet,Bao'anDistrict,518108, Shenzhen,Guangdong,China Manufacturer:ShenzhenSunperOptoCo.,Ltd Address: 5/F,BlockC,SanminIndustrialPark,ShiyanStreet,Bao'anDistrict,518108, Shenzhen,Guangdong,China Factory :ShenzhenSunperOptoCo.,Ltd Address: 5/F,BlockC,SanminIndustrialPark,ShiyanStreet,Bao'anDistrict,518108, Shenzhen,…

Text truncated - open the document above for the full version.

深圳市三盛创科技有限公司 产品规格承认书 SPECIFICATON APPROVAL 客户名称： CUSTOMER 客户品名： Product Name of Customer:无线充电线圈 我方产品名（材质）： Product Name ofOurs(Material):Φ50MMX5.3MMX0.8MM开槽 承 认： APPROVED:A.0 核准： 安帅印制表： 郭柳 日期： 2023.05.18 APPROVEDDRAWNDATE 地址：深圳市光明区玉塘街道玉律社区大洋一路19号B栋201 电话：传真： 页码 1 of 4 Specification 规格内容 CISTOMEP/N: 客户品名 无线充线圈 PARTNUMBER: 制造商料号 Φ20.5MMX43-6.3uH-0.08*105P*10TS 1.DIMENSIONS(外形尺寸）： MM ABCDEFG 尺寸 （Dim) 49.54320.55.34532.5 公差 （Tol.) ±0.5 ±1 ±0.5±0.5±0.2 ±1±0.2 APPROVED BY 承认 CHECKED BY 审查 PREPARED BY 制作 DATE 日期 PACE 页码 安帅印郭柳 2023-5-182 of 4 Specifcation CUSTOMERP/N: 客户名称 无线充线圈 规格内容 PARTNUMBER: 制造商料号 Φ20.5MMX43-6.3UH-0.08*105P 5.WINDING DETAILS(绕线详细说明）： Ndy.NO. 绕组 Start 开始 Finish 结束 Turns 圈数 Wire Dia 线径 Wdg.TyepeSpra/l ose 绕线方法疏/密绕 Wdg.Direction 绕线方向 Turns/Layer 层数/每层圈数 SF10TS0.08*105P丝包线密绕逆时针1层/10TS 6.ELECTRICAL CHARACTERISTICS(电气特性）：TH2817B+LCR Meter PARAMETERSUNINLIMTI Inductance ls@100KHz/1vIND加磁片6.3uH±10% Q @100KHz/1vQ≥80 DCR @100KHz/1vΩ≥50mΩ Inductance ls@100KHz/1vIND3.8uH ±10%单独线圈 APPROVED BY 承认 CHECKED BY 审查 PREPARED BY 制作 DATE 日期 PAGE 页码 安帅印郭柳2023/5/183 of 4 MATERIAL LIST 材料清单 CUSTOMER P/N: 客户品名 无线充线圈 PARTNUMBER： 制造商料号 Φ20.5MMX43-6.3UH-0.08*105P NO. Material name 材料名称 Description 品名描述 Manufacturer 制造商 UL NO. 编号 1丝包线0.08*105P 2无铅锡条高温无铅 3铁氧体隔磁片50*0.8*5.3 4珍珠棉370*250*60 5纸箱385*255*200 6 高温胶带 0.15*8 7 胶水 环保水溶胶 8 双面胶 49*7.5*0.15 9 10 APPROVED BY 承认 CHECKED BY 审查 PREPARED BY 制作 DATE 日期 PAGE 页码 安帅印郭柳2023/5/184 of 4

ProjectNo.:18220WC300828Page1of3 Code:AB-RF-05-b AppendixI--TestSetupPhotograph_MPE ProjectNo.:18220WC300828Page2of3 Code:AB-RF-05-b ProjectNo.:18220WC300828Page3of3 Code:AB-RF-05-b

ProjectNo.:18220WC300828Page1of2 Code:AB-RF-05-b AppendixI--TestSetupPhotograph_RF PhotoofConductedEmissionMeasurement PhotoofRadiationEmissionTest ProjectNo.:18220WC300828Page2of2 Code:AB-RF-05-b