2BA6N-E83-in-1 charging station

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: JOC Australia Inc FRN: 0033379421 Contact Name: Benjamin. Smith/Vice President Address: 18351 Colima Road Ste 585 Rowland Heights,California,91748 United States of America Telephone No: +1(626) 217 4778 Email: [email protected]/[email protected] Applicant: Company name: Shenzhen Yize Innovation Technology Co., Ltd. Product Description: 3-in-1 charging station Grantee code: 2BA6N Contact Name: Xiao Yao Address: 201, 2nd Floor, Building 3, Yunli Smart Park, Bantian Street, Longgang District, Shenzhen, CN Telephone No: 18002598421 Email: [email protected] [Shenzhen Yize Innovation Technology Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [JOC Australia Inc] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen Yize Innovation Technology Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [JOC Australia Inc] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2023/04/28 Applicant’s Name: Shenzhen Yize Innovation Technology Co., Ltd. US Agent for Service of Process’s Name: JOC Australia Inc Title: Engineer director Title: Vice President Signature: Xiao Yao Signature Benjamin. Smith FCC ID: 2BA6N-E8 FRN:0033768276

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Yize Innovation Technology Co., Ltd. Grantee code: 2BA6N FRN: 0033768276 FCC ID: 2BA6N-E8 Contact Name: Xiao Yao Address: 201, 2nd Floor, Building 3, Yunli Smart Park, Bantian Street, Longgang District, Shenzhen, CN Telephone No: 18002598421 Fax No: Email: [email protected] i. [Shenzhen Yize Innovation Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen Yize Innovation Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen Yize Innovation Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 2023/11/17 Applicant’s Name: Shenzhen Yize Innovation Technology Co., Ltd. Title: Engineer director Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 Letter of Authorization Shenzhen Yize Innovation Technology Co., Ltd. Company: Shenzhen Yize Innovation Technology Co., Ltd. Address: 201, 2nd Floor, Building 3, Yunli Smart Park, Bantian Street, Longgang District, Shenzhen, CN Product Name: 3-in-1 charging station Model Number: E8 FCC Identifier: 2BA6N-E8 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xiao Yao Date: 2023.11.14 Title: Engineer director Signature of applicant:

C5266091_X10_Ed.2 1/1 Shenzhen Yize Innovation Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023.11.14 Subject: Request for Confidentiality FCC ID: 2BA6N-E8 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Xiao Yao Title: Engineer director

Page 1 of 5 Report No.: CTA231109004 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model:E8 Photo 1 Photo 2 Page 2 of 5 Report No.: CTA231109004 Photo 3 Photo 4 Page 3 of 5 Report No.: CTA231109004 Photo 5 Photo 6 Page 4 of 5 Report No.: CTA231109004 Photo 7 Photo 8 Page 5 of 5 Report No.: CTA231109004 Photo 9

FCC Label 30mm*20mm 3-in-1 charging station E8 FCC ID: 2BA6N-E8

Page 1 of 3 Report No.: CTA231109004 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model:E8 Photo 1 Photo 2 Antenna Page 2 of 3 Report No.: CTA231109004 Photo 3 Photo 4 Page 3 of 3 Report No.: CTA231109004 Photo 5 Photo 6

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from CTA, all test data presented in this report is only applicable to presented test sample. Radio Test Report Report No.:CTA231109004H01 Issued for Shenzhen Yize Innovation Technology Co., Ltd. 201, 2nd Floor, Building 3, Yunli Smart Park, Bantian Street, Longgang District, Shenzhen, CN Product Name: 3-in-1 charging station Brand Name: N/A Model Name: E8 Series Model(s): N/A FCC ID: 2BA6N-E8 Test Standards: FCC CFR 47 part 1, 1.1310 Page 2 of 14 Report No.: CTA231109004H01 TEST REPORT Applicant’s Name.................... : Shenzhen Yize Innovation Technology Co., Ltd. Address................................... : 201, 2nd Floor, Building 3, Yunli Smart Park, Bantian Street, Longgang District, Shenzhen, CN Manufacturer's Name ............. : Shenzhen Yuanwangxing Technology Co., LTD. Address................................... : Second floor, No. 7, Honghua Lane, Chihua Ling, Guihua Community, Guanlan Street, Longhua District, Shenzhen Product Description Product Name......................... : 3-in-1 charging station Brand Name .......................... : N/A Model Name .......................... : E8 Series Model(s) ...................... : N/A Test Standards........................ : FCC CFR 47 part 1, 1.1310 Test Procedure ...................... : 680106 D01 Wireless Power Transfer v04 This device described above has been tested by CTA, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of CTA, this document may be altered or revised by CTA, personal only, and shall be noted in the revision of the document. Date of Test............................. : Date of receipt of test item ..... : 24 Oct. 2023 Date of performance of tests .. : 24 Oct. 2023 ~ 04 Nov. 2023 Date of Issue .......................... : 04 Nov. 2023 Test Result .............................. : Pass Testing Engineer : (Zoey Cao) Technical Manager : (Amy Wen) Authorized Signatory : (Eric Wang) Page 3 of 14 Report No.: CTA231109004H01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 5 1.1 TEST FACTORY 5 1.2 MEASUREMENT UNCERTAINTY 5 1.3 GENERAL DESCRIPTION OF THE EUT 6 1.4 EQUIPMENTS LIST FOR ALL TEST ITEMS 7 1.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 7 2. MAXIMUM PERMISSIBLE EXPOSURE 8 2.1 MAXIMUM PERMISSIBLE EXPOSURE 8 2.2 TEST PROCEDURE 9 2.3 TEST SETUP 9 2.4 TEST RESULTS 9 2.5 MAXIMUM PERMISSIBLE EXPOSURE 10 Page 4 of 14 Report No.: CTA231109004H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 04 Nov. 2023 CTA231109004H01 ALL Initial Issue Page 5 of 14 Report No.: CTA231109004H01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC KDB 680106 D01 Wireless Power Transfer v04 FCC CFR 47 Standard Section Test Item Judgment Remark FCC CFR 47 part1, 1.1310 KDB680106 D01v04 Electric Field Strength (E) (V/m) PASS Magnetic Field Strength (H) (A/m) PASS 1.1 TEST FACTORY Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community,Fuhai Street, Bao‘an District, Shenzhen, China FCC test Firm Registration Number: 517856 IC test Firm Registration Number: 27890 A2LA Certificate No.: 6534.01 IC CAB ID: CN0127 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainly 1 H-filed ±0.83dB 2 E-filed ±0.91dB Page 6 of 14 Report No.: CTA231109004H01 1.3 GENERAL DESCRIPTION OF THE EUT Product Name 3-in-1 charging station Brand N/A Model Number E8 Series Model(s) N/A Model Difference N/A Equipemnt Category Non-ISM frequency Antenna Type Please refer to the Note 2. Operating frequency 110.5-205KHz Modulation Type PFM Rating Input: 12V 3A DC Output: Output 1 for iPhone: DC 5V 3A, DC 9V 2.77A, DC 3.3-11V 2.75A Output 2 for Watch: DC 5V 0.6A Output 3 for earphone: DC 5V 1A Adapter Input: 100-240V~ 50/60Hz, 1.0A MAX Output: 12V 3A Hardware version number N/A Software version number N/A Connecting I/O Port(s) Please refer to the Note 1. Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User Manual. 2. Test channel list Coil Frequency(KHz) 1 126.7 3.Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector NOTE 1 N/A E8 Coil N/A Antenna The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. Page 7 of 14 Report No.: CTA231109004H01 1.4 EQUIPMENTS LIST FOR ALL TEST ITEMS Kind of Equipment Manufacturer Type No. Serial No. Last calibration Calibrated until Electric and Magnetic field Probe - Analyzer Narda EHP 200A 180ZX10220 2023.02.28 2024.02.27 1.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS Necessary accessories Item Equipment Mfr/Brand Model/Type No. Length Note Adapter N/A HH0024Z-090200-AG N/A N/A DC Cable N/A N/A 100cm NO phone Xiao mi 12 Pro N/A N/A Watch Samsung Active2(E060) N/A N/A Headphone charging box Samsung SM-R180 N/A N/A Support units Item Equipment Mfr/Brand Model/Type No. Length Note N/A N/A N/A N/A N/A N/A Note: (1) For detachable type I/O cable should be specified the length in cm in『Length』column. (2) “YES” is means “with core”; “NO” is means “without core”. Page 8 of 14 Report No.: CTA231109004H01 2. MAXIMUM PERMISSIBLE EXPOSURE 2.1 MAXIMUM PERMISSIBLE EXPOSURE Limit of Maximum Permissible Exposure Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V…

Text truncated - open the document above for the full version.

ProductNameofCustomer ProductMameofOurs(Matenial) Watch-coiltank-shapedmagnetic pieceKP 27*3/16TS /outgoingline 15MM APPROVED APPROVEDDengXiangDRAWNLai WeiDATE2019/10/16 Address： No.3,IndustrialRoad1, SonggangXixiCommunity, BaoanDistrict,ShenzhenCity Telephone：1511 2322462Fax ：0755-29909524 pagination1 of 5 CUSTOMER:ShenzhenChimeleTechnologyCo., Ltd Model: E8 REVISEDRECORD PEVISONNO DATE REVISEDESCRIPTION Changeperson REV:01 REV:02 ESCRINEDCHECKEDAPPROVED PACE 2of5 Specification CISTOMEP/N: PARTNUMBER 1.DIMENSIONSmm APPROVEDBY CHECKEDBY PREPAREDBY DATE PACE 2019/10/17 Specifcation CUSTOMERP/N: PARTNUMBER 5.WINDINGDETAILS Wdy.NO . Start Finish Turns WireDia Wdg.TyepeSprad/lose Wdg.Direction Turns/Layer S F 16TS 0.05*75P /16TS 6.ELECTRICALCHARACTERISTICS PARAMETERS UNINLIMTI Inductancels@100KHz/1v uh 12.2 5% Q@100KHz/1v45Min DCR@100KHz/1v 130Max APPROVEDBY CHECKEDBY PREPAREDBYDATE PAGE 2019/10/17 4of5 m MATERIAL LIST CUSTOMER P/N: PARTNUMBER： NO. Material name Description Manufacturer Material 1 silk-coveredwire 0.05*75P 2 Lead-freetinstriphightemperature 3 magneticsheet diameter27.5MM ferrite.Manganese zinc.PC95 4 glueResinglue APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 赖伟 2019/1017 5of5

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from CTA, all test data presented in this report is only applicable to presented test sample. Radio Test Report Report No.:CTA231109004W02 Issued for Shenzhen Yize Innovation Technology Co., Ltd. 201, 2nd Floor, Building 3, Yunli Smart Park, Bantian Street, Longgang District, Shenzhen, CN Product Name: 3-in-1 charging station Brand Name: N/A Model Name: E8 Series Model(s): N/A FCC ID: 2BA6N-E8 Test Standards: FCC Part 15 Subpart C Page 2 of 22 Report No.: CTA231109004W02 TEST REPORT Applicant’s Name.................... : Shenzhen Yize Innovation Technology Co., Ltd. Address................................... : 201, 2nd Floor, Building 3, Yunli Smart Park, Bantian Street, Longgang District, Shenzhen, CN Manufacturer's Name ............. : Shenzhen Yuanwangxing Technology Co., LTD. Address................................... : Second floor, No. 7, Honghua Lane, Chihua Ling, Guihua Community, Guanlan Street, Longhua District, Shenzhen Product Description Product Name......................... : 3-in-1 charging station Brand ...................................... : N/A Model Number ........................ : E8 Series Model(s) ...................... : N/A Test Standards ...................... : FCC Part 15 Subpart C Test Procedure ....................... : ANSI C63.10-2013 This device described above has been tested by CTA, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of CTA, this document only be altered or revised by CTA, personal only, and shall be noted in the revision of the document. Date of Test ................................. : Date of receipt of test item .......... : 24 Oct. 2023 Date (s) of performance of tests : 24 Oct. 2023 ~ 04 Nov. 2023 Date of Issue ............................... : 04 Nov. 2023 Test Result ................................... : Pass Testing Engineer : (Zoey Cao) Technical Manager : (Amy Wen) Authorized Signatory : (Eric Wang) Page 3 of 22 Report No.: CTA231109004W02 Table of Contents Page 1. SUMMARY OF TEST RESULTS 5 1.1 TEST FACTORY 5 1.2 MEASUREMENT UNCERTAINTY 5 2. GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF THE EUT 6 2.2 DESCRIPTION OF THE TEST MODES 7 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 8 2.4 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 9 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 10 3. CONDUCTED EMISSION TEST RESULT (SECTION 15.207) 12 3.1 POWER LINE CONDUCTED EMISSION LIMITS 12 3.2 TEST PROCEDURE 13 3.3 TEST SETUP 13 3.4 EUT OPERATING CONDITIONS 13 3.5 TEST RESULTS 14 4. RADIATED& FIELD EMISSION TEST RESULT (SECTIOU 15.209) 16 4.1 LIMIT 16 4.2 TEST PROCEDURE 16 4.3 TEST SETUP 17 4.4 TEST RESULTS 18 5. 20 DB BANDWIDTH TEST 21 5.1 LIMIT 21 5.2 TEST SETUP 21 5.3 TEST RESULTS 21 APPENDIX-PHOTOS OF TEST SETUP 22 Page 4 of 22 Report No.: CTA231109004W02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 04 Nov. 2023 CTA231109004W02 ALL Initial Issue Page 5 of 22 Report No.: CTA231109004W02 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.209(a) Radiated emission, Spurious Emission PASS 2.1049 20 dB Bandwidth PASS 1.1 TEST FACTORY Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community,Fuhai Street, Bao‘an District, Shenzhen, China FCC test Firm Registration Number: 517856 IC test Firm Registration Number: 27890 A2LA Certificate No.: 6534.01 IC CAB ID: CN0127 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. Test Range Measurement Uncertainty Radiated Emission 30~1000MHz 4.06 dB Radiated Emission 1~18GHz 5.14 dB Radiated Emission 18-40GHz 5.38 dB Conducted Disturbance 0.15~30MHz 2.14 dB Output Peak power 30MHz~18GHz 0.55 dB Power spectral density / 0.57 dB Spectrum bandwidth / 1.1% Radiated spurious emission (30MHz-1GHz) 30~1000MHz 4.10 dB Radiated spurious emission (1GHz-18GHz) 1~18GHz 4.32 dB Radiated spurious emission (18GHz-40GHz) 18-40GHz 5.54 dB Page 6 of 22 Report No.: CTA231109004W02 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name 3-in-1 charging station Brand N/A Model Number E8 Series Model(s) N/A Model Difference N/A Channel List Please refer to the Note 2. Antenna Type Please refer to the Note 3. Equipemnt Category Non-ISM frequency Operating frequency 110.5-205KHz Modulation Type PFM Rating: Input: 12V 3A DC Output: Output 1 for iPhone: DC 5V 3A, DC 9V 2.77A, DC 3.3-11V 2.75A Output 2 for Watch: DC 5V 0.6A Output 3 for earphone: DC 5V 1A Adapter Input: 100-240V~ 50/60Hz, 1.0A MAX Output: 12V 3A Hardware version number N/A Software version number N/A Connecting I/O Port(s) Please refer to the Note 1. Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User Manual. 2. Test channel list Coil Frequency(KHz) 1 126.7 3. Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector NOTE 1 N/A E8 Coil N/A Antenna Page 7 of 22 Report No.: CTA231109004W02 2.2 DESCRIPTION OF THE TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2BA6N-E8 DCD Setup photo Model name: E8 Conduction Radiation (9KHz-30MHz) Page 2 of 2 FCC ID: 2BA6N-E8 Radiation (30MHz-1000MHz)