2BA78HM8011Rechargeable Wireless Mouse

amazon.com/AmazonBasics MADE IN CHINA FABRIQUE EN CHINE HERGESTELLT IN CHINA PRODOTTO IN CINA HECHO EN CHINA GEMAAKT IN CHINA PMN:Rechargeable Wireless Mouse AmazonBasics Rechargeable Wireless Keyboard Mouse Combo Welcome Guide • English Parts List - Mouse 1 Left Button 2 Scrolling Wheel 3 Right Button 4 6 7 8 9 DPI Button 5 Low battery Indicator ON/OFF Switch Sensor USB Cover Nano Receiver 10 Type-c charging port 123 4 6 8 9 7 5 10 1 2 Parts List - Keyboard 1234567 22 23 2425 891011121314151617 18 19 20 21 3 1 To turn on the Media player program 2 To decrease volume 3 To increase volume 4 To mute the sound 5 Previous track 6 Next track 7 To play/pause media playback 8 To stop media playback 9 To start the default Web browser and load the home page 10 To start the default e-mail client 11 To open up the folder 'My Computer' 12 To open 'My favorite' when inside the browser 4 13 Fn lock 14 Right click 15 Search 16 Calculator 17 Screen 18 19 20 21 22 23 24 ON/OFF Switch LED indicatorLow battery LED indicator LED indicator LED indicator Number Lock on Caps Lock on Scroll Lock indicator USB cover To enable the second function of the Function keys Typec-C Charging port Charging Cable When the battery is too low, The power red Indicator will flash until shut down please connect to the power supply to charge in time to ensure that the keyboard and mouse sufficient power to meet normal work. if the battery of the keyboard and mouse is too low, there will have delays and freezes and other problems in typing, which will affect normal use. Power indicator turns red while charging then turns to green after 2-3 hours fully charged. 5 25 Press Fn + any function key (1 through 12) to trigger the secondary function of each key. NOTE Keyboard & Mouse Charging 6 1. Turn on the power switch to ON. 2. Take out the USB receiver from keyboard slot(Keyboard and Mouse share one Receiver) 3. Plug the USB receiver into USB port of your computer. Conncetion 7 Cleaning and Maintenance Keyboard & Mouse LED Indicator Turn on keyboard & mouse LED is lighting 10 sec. battery Indicator • Clean the product with a dry lint-free cloth. Do not allow any water or other liquids enter the product's interior. • Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning. • Clean the battery contacts and also those of the product prior to battery installation. Battery Indicator Lowbattery LED blinks Red light for charging Green light charging completed battery Indicator 8 FCC -Supplier's Declaration of Conformity FCC Compliance Statement 1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit dif ferent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technicianfor help. 9 Canada IC Notice • This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1)this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement. Intended Use This product is a wireless computer peripheral intended for interacting with your desktop/laptop. 10 Do not look directly at the LED light Safety and Compliance Read this instruction manual carefully before using the product. It contains important information for your safety as well as operating and maintenance advice. Observe all safety instructions to avoid damage through improper use! Follow all warnings on the product. Keep this instruction manual for future use. Should this product be passed on to a third party, then this instruction manual must be included. • Never use this product if damaged • Do not insert any foreign objects into the inside of the casing • Protect the product from extreme temperatures, hot surfaces open flames, direct sunlight, water , high humidity, moisture, strong jolts, flammable gases, vapours and solvents. • Keep this product and its packaging out of the reach of children and pets. Battery Warnings • Keep batteries out of the reach of children. • Do not dispose of batteries in fire. • Store unused batteries in their original packaging away from metal objects. If already unpacked, do not mix or jumble batteries. • Remove batteries from product if it is not to be used for…

Text truncated - open the document above for the full version.

Zaidtek Electronic Technology (Xiamen) Co.,Ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 9/18/2023 U.S. Agent Designation Zaidtek Electronic Technology (Xiamen) Co.,Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BA78HM8011): Name and company of U.S. agent: TianHeng Consulting, LLC Physical U.S. address of agent: 392 Andover Street Wilmington, MA 1887 United States FRN of U.S. agent: 0033401258 Email address of U.S. agent: [email protected] TianHeng Consulting, LLC acknowledges their obligation to accept service of process on behalf of Zaidtek Electronic Technology (Xiamen) Co.,Ltd. Zaidtek Electronic Technology (Xiamen) Co.,Ltd with the FRN 0033781527 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Sandy Chen Director Zaidtek Electronic Technology (Xiamen) Co.,Ltd Signature Hualing Dong President TianHeng Consulting, LLC 48_[mo del] US_Agent_2.911(d)(7) - U, V05

Page 1 of 4 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 4 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8

Page 1 of 1 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L: 2.0cm x W: 2.5cm) Label Location Rechargeable Wireless Mouse HVIN:HM8011 FCC ID:2BA78HM8011 IC:8340A-HM8011

Page 1 of 5 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 5 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 5 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 5 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 TX Antenna Page 5 of 5 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9

Page 1 of 3 FCC ID: 2BA78HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information FCC ID : 2BA78HM8011 Product name : Rechargeable Wireless Mouse Test Model : HM8011 Power Supply : Input :DC 5V Battery: DC 3.7V, 1100mAh, 4.07Wh Hardware Version : V1.0 Software Version : V1.0 2.4G : Frequency Range : 2402MHz-2480MHz Channel Spacing : 2MHz Channel Number : 40 Modulation Type : GFSK Antenna Type : PCB Antenna Antenna Gain : -1.52dBi Exposure category : General population/uncontrolled environment EUT Type : Production Unit Device Type : Portable Device 2. Evaluation method and Limit According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.“ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test Page 2 of 3 FCC ID: 2BA78HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. When one of the following test exclusion conditions is satisfied for all combinations of simultaneous transmission configurations, further equipment approval is not required to incorporate transmitter modules in host devices that operate in the mixed mobile and portable host platform exposure conditions. The grantee is responsible for documenting this according to Class I permissive change requirements. Antennas that qualify for standalone SAR test exclusion must apply the estimated standalone SAR to determine simultaneous transmission test exclusion. a) The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. b)The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. 3. Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices 4. Conducted Power Results <2.4G> Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) GFSK 0 2402 0.3 19 2440 -0.82 39 2480 -0.56 Page 3 of 3 FCC ID: 2BA78HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 5. Manufacturing Tolerance <2.4G> GFSK (Peak) Channel Channel 0 Channel 19 Channel 39 Target (dBm) 0 0 0 Tolerance ±(dB) 1.0 1.0 1.0 6. Evaluation Results 6.1 Standalone Evaluation Band/Mode f (GHz) Antenna Distance (mm) RF output power SAR Test Exclusion Threshold SAR Test Exclusion dBm mW 2.4G GFSK 2.402 5 1.0 1.2589 0.3902< 3.0 Yes Remark: 1. Output powe…

Text truncated - open the document above for the full version.

Antenna Specification Specifications Summary ITEMSPEC. Model Name IBM 2.4 GHz Center Frequency 2402 MHz -2.10 dBi 2440 MHz -1.78 dBi 2480 MHz -1.52 dBi MAX. GAIN Polarization Azimuth Beam Pattern Impedance Antenna Length -1.52dBi Horizontal Omni-directional 50 Ω 23.7 mm Antenna Photo & Length 1. Main antenna : 2402 MHz 1.1 Horizontal 1.2 Vertical 2. Main antenna : 2441 MHz 2.1 Horizontal 2.2 Vertica . 3. Main antenna : 2480 MHz 3.1 Horizontal 3.2 Vertical 4. Result Center Frequency Maximum Ant Gain 2402MHz H -2.10 dBi V -5.02 dBi 2441 MHz H -1.78 dBi V -5.80 dBi 2480 MHz H -1.52 dBi V -4.52 dBi

Page 1 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A RF Test Data for 2.4G (Conducted Measurement) Product Name: Rechargeable Wireless Mouse Test Model: HM8011 Environmental Conditions Temperature: 23.5 C Relative Humidity: 52.2% ATM Pressure: 100.0 kPa Test Engineer: Joker Hu Supervised by: Ling Zhu Page 2 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.1 -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT 2.4G 2402 Ant 1.129 >=0.5 Pass NVNT 2.4G 2440 Ant 1.133 >=0.5 Pass NVNT 2.4G 2480 Ant 1.128 >=0.5 Pass Page 3 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs -6dB Bandwidth NVNT 2.4G 2402MHz Ant -6dB Bandwidth NVNT 2.4G 2440MHz Ant Page 4 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -6dB Bandwidth NVNT 2.4G 2480MHz Ant Page 5 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.2 Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT 2.4G 2402 Ant 2.026 NVNT 2.4G 2440 Ant 2.028 NVNT 2.4G 2480 Ant 2.028 Page 6 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs OBW NVNT 2.4G 2402MHz Ant OBW NVNT 2.4G 2440MHz Ant Page 7 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity OBW NVNT 2.4G 2480MHz Ant Page 8 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.3 Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Total Power (dBm) Limit (dBm) Verdict NVNT 2.4G 2402 Ant 0.3 30 Pass NVNT 2.4G 2440 Ant -0.82 30 Pass NVNT 2.4G 2480 Ant -0.56 30 Pass EIRP Test Mode Frequency (MHz) Total Power (dBm) Antenna Gain Report EIRP Power(dBm) Limit[dBm] Verdict 2.4G 2402 0.3 -1.52 -1.22 ≤36 PASS 2440 -0.82 -1.52 -2.34 ≤36 PASS 2480 -0.56 -1.52 -2.08 ≤36 PASS Page 9 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs Power NVNT 2.4G 2402MHz Ant Power NVNT 2.4G 2440MHz Ant Page 10 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Power NVNT 2.4G 2480MHz Ant Page 11 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.4 Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Antenna Total PSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNT 2.4G 2402 Ant -19.38 8 Pass NVNT 2.4G 2440 Ant -20.53 8 Pass NVNT 2.4G 2480 Ant -20.37 8 Pass Page 12 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs PSD NVNT 2.4G 2402MHz Ant PSD NVNT 2.4G 2440MHz Ant Page 13 of 26 FCC ID:2BA78HM8011 IC:8340A-HM8011 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | We…

Text truncated - open the document above for the full version.

Page 1 of 34 FCC ID:2BA78HM8011 Report No.: LCSA08253042EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Zaidtek Electronic Technology (Xiamen) Co.,Ltd Rechargeable Wireless Mouse Test Model: HM8011 Prepared for : Zaidtek Electronic Technology (Xiamen) Co.,Ltd Address : No. 29-2 XinLe Road, Haicang District, Xiamen, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : August 28, 2023 Number of tested samples : 2 Sample No. : A08253042-1, A08253042-2 Serial number : Prototype Date of Test : August 28, 2023~ September 12, 2023 Date of Report : September 12, 2023 Page 2 of 34 FCC ID:2BA78HM8011 Report No.: LCSA08253042EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15 C(15.247) Report Reference No. ................. : LCSA08253042EA Date of Issue ................................... : September 12, 2023 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure ........... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name .......................... : Zaidtek Electronic Technology (Xiamen) Co.,Ltd Address ........................................... : No. 29-2 XinLe Road, Haicang District, Xiamen, China Test Specification Standard .......................................... : FCC CFR 47 PART 15 C(15.247) Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. ........................... : Rechargeable Wireless Mouse Trade Mark ...................................... : Amazon Test Model ...................................... : HM8011 Ratings ............................................ : Input :DC 5V Battery: DC 3.7V, 1100mAh, 4.07Wh Result ........................................... : Positive Compiled by: Supervised by: Approved by: Jack Liu/ Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 34 FCC ID:2BA78HM8011 Report No.: LCSA08253042EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC -- TEST REPORT Test Model............................... : HM8011 EUT......................................... : Rechargeable Wireless Mouse Applicant............................... : Zaidtek Electronic Technology (Xiamen) Co.,Ltd Address.................................. : No. 29-2 XinLe Road, Haicang District, Xiamen, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Zaidtek Electronic Technology (Xiamen) Co.,Ltd Address................................... : No. 29-2 XinLe Road, Haicang District, Xiamen, China Telephone............................... : / Fax.......................................... : / Factory................................... : Zaidtek Electronic Technology (Xiamen) Co.,Ltd Address................................... : No. 29-2 XinLe Road, Haicang District, Xiamen, China Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA08253042EA September 12, 2023 Date of issue Page 4 of 34 FCC ID:2BA78HM8011 Report No.: LCSA08253042EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 September 12, 2023 Initial Issue -- Page 5 of 34 FCC ID:2BA78HM8011 Report No.: LCSA08253042EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, …

Text truncated - open the document above for the full version.