2BA7O-SRBDLLCLSpeakerbag

Charge Battery: To charge the battery, insert the USB charger into the device into port #4, and plug it into the wall. You’ll want to use at least a 5 Volt/1.5 Amp charger in order to get a fast and full charge. When the left most light is red it indicates the speaker is charging. Light indications: The three light indicators on the right show how much JUICE you have left. All 3 lights full? You are JUICED (power is full), my friend! Bluetooth Connection: Flip the switch “ON” #1, turn on Bluetooth via any device. You’ll see “Super Real Bluetooth” as an option. Connect, and you’re good! You can connect via 3.5mm jack into the speaker via the aux port (#3) too. Thanks so much - if you LOVE the product, we would love a review on Amazon! Sign up for our FREE WARRANTY by scanning the QR code below or by going to the below URL: https://www.superrealbusiness.com/collections/warranty Speaker Instructions You’ll notice a few features on the speaker panel: 1.) The OFF/ON button 2.) The USB port for power output (charge your phone or device) 3.) The 3.5mm auxiliary port (sound output) 4.) The mini USB port for power input (charge the speaker) 5.) The charging indicator and Bluetooth connection. The left light indicates Bluetooth connection and charging. The three lights on the right indicate battery level. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Photo 9 Appearance of EUT Photo 10 Appearance of EUT FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Photo 11 Appearance of EUT

FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Appendix IFCC ID Label Speakerbag FCC ID: 2BA7O-SRBDLLCL Model: SRBDLLCL This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Appendix II ID Label Location Size for the label: 40mm X 10mm Label Location

FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 12 Internal of EUT Photo 13 Battery parameters FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Photo 14 Appearance of PCB Photo 15 Appearance of PCB FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Photo 16 Appearance of PCB BLE Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202305-0013-1 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID: 2BA7O-SRBDLLCL 1. Client Information Applicant : Super Real Business Deals LLC Address : 30 N Gould St Ste R Sheridan WY 82801 Manufacturer : Super Real Business Deals LLC Address : 30 N Gould St Ste R Sheridan WY 82801 2. General Description of EUT EUT Name : Speakerbag Model(s) No. : SRBDLLCL, SRBBP, SRBBP1, SRBBP2, SRBBP3, SRBBP4, SRBBP5, SRBBP6, SRBBP7, SRBBP8, SRBBP9, SRBBP10, SRBBP11, SRBBP12, SRBBP13, SRBBP14, SRBBP15, SRBBP16, SRBBP17, SRBBP18, SRBBP19, SRBBP20, SRBC, SRBC1, SRBC2, SRBC3 Model Difference : All PCB boards and circuit diagrams are the same, the only difference is that color. Product Description : RF Output Power: BT: 2.646dBm Antenna Gain: 1.3dBi PCB Antenna Power Rating : DC 3.7V by 4400mAh Rechargeable Li-ion battery Software Version : MBE-AB5363B_4D39B6C7(Super Real Bluetooth)2021-6-1 Hardware Version : MBE-CS-21-5-22-V3 Remark: The antenna gain provided by the applicant, the adapter and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202305-0013-1 Page: 2 of 3 TB-RF-074-1.0 The RF Exposure Evaluation for FCC: SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤7.5.0 for 10-g SAR Report No.: TBR-C-202305-0013-1 Page: 3 of 3 TB-RF-074-1.0 Calculation: Test separation: 5mm Bluetooth Mode Frequency (MHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value GFSK 2402 -0.399 0±1 1 1.259 0.39 3.0 2441 -1.209 -1±1 0 1.000 0.31 3.0 2480 -1.986 -2±1 -1 0.794 0.25 3.0 π/4-DQP SK 2402 1.979 2±1 3 1.995 0.62 3.0 2441 1.111 1±1 2 1.585 0.50 3.0 2480 0.339 0±1 1 1.259 0.40 3.0 8-DPSK 2402 2.646 3±1 4 2.512 0.78 3.0 2441 1.775 2±1 3 1.995 0.62 3.0 2480 0.974 1±1 2 1.585 0.50 3.0 Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06, No SAR is required. -----END OF REPORT-----

Product specification Quick Reference Date All the technical data and information contained herein are subject to change without prior notice Antenna Layout & module on the system board Antenna Gain Gain Table Antenna module on the system board Frequency 2.45GHz*1 Ant. Port Input Pwr. (dBm) 0 (Typ. BT class 2 output power) Tot. Rad. Pwr. (dBm) -2.3 (Input pwr – loss pwr) Peak EIRP(dBm) 1.3 Directivity (dBi) 1 (all direction antenna) Efficiency (dB) -2.3 (58.5%) Gain (dBi) 1.3 (Peak Gain XY-plane) Maximum Power (dBm) 1.3 (XY-plane) Minimum Power (dBm) -4(XY-plane) Avg. Power (dBm) -0.5(XY-plane) Max/Min Ratio (dB) 5.3(XY-plane) Max/Avg Ratio (dB) 1.8(XY-plane) Min/Avg Ratio (dB) -3.5(XY-plane) Average Gain (dB) -0.5 (Avg Gain XY-plane) Unit in dBi @2.44GHz XY-plane XZ-plane YZ-plane Efficiency Peak Avg. Peak Avg. Peak Avg. Avg. Module Board 1.3 -0.5 1.7 -3.8 1.1 -3.0 58.5% Unit in dBi @2.44GHz XY-plane XZ-plane YZ-plane Efficiency Peak Avg. Peak Avg. Peak Avg. Avg. Module Board 1.3 -0.5 1.7 -3.8 1.1 -3.0 58.5% Unit in dBi @2.44GHz XY-plane XZ-plane YZ-plane Efficiency Peak Avg. Peak Avg. Peak Avg. Avg. Module Board 1.3 -0.5 1.7 -3.8 1.1 -3.0 58.5% Unit in dBi @2.44GHz XY-plane XZ-plane YZ-plane Efficiency Peak Avg. Peak Avg. P e a k Avg. Avg. Module Board 1.3 -0.5 1.7 -3.8 1. 1 -3.0 58.5% Unit in dBi @2.44GHz XY-plane XZ-plane YZ-plane Efficiency Peak Avg. Peak Avg. Peak Avg. Avg. Module Board 1.3 -0.5 1.7 -3.8 1.1 -3.0 58.5% Antenna module on the system board Frequency 2.45GHz*1 Ant. Port Input Pwr. (dBm) 0 (Typ. BT class 2 output power) Tot. Rad. Pwr. (dBm) -2.3 (Input pwr – loss pwr) Peak EIRP(dBm) 1.3 Directivity (dBi) 1 (all direction antenna) Efficiency (dB) -2.3 (58.5%) Gain (dBi) 1.3 (Peak Gain XY-plane) Maximum Power (dBm) 1.3 (XY-plane) Minimum Power (dBm) -4(XY-plane) Avg. Power (dBm) -0.5(XY-plane) Max/Min Ratio (dB) 5.3(XY-plane) Max/Avg Ratio (dB) 1.8(XY-plane) Min/Avg Ratio (dB) -3.5(XY-plane) Average Gain (dB) -0.5 (Avg Gain XY-plane) Unit in dBi @2.44GHz XY-plane XZ-plane YZ-plane Efficiency Return Loss The Environment of Antenna Radiation Pattern 3D radiation pattern diagram XY-plane XZ-plane YZ-plane

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0013-2 Page: 1 of 69 FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 RF Test Data for Bluetooth(BDR+EDR) (Conducted Measurements) General Description of EUT Product Name: Speakerbag Test Model: SRBDLLCL Sample ID: 202305-0013-1-2# Environmental Conditions Temperature: 25°C Relative Humidity: 55% Test Voltage: DC 3.7V Test Engineer: Huang jian ping Note: For a more detailed features description, please refer to the report TBR-C-202305-0013-2 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0013-2 Page: 2 of 69 FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................. 9 3. -20dB Bandwidth .............................................................................................................................................................................. 15 4. Occupied Channel Bandwidth ......................................................................................................................................................... 21 5. Band Edge ........................................................................................................................................................................................ 27 6. Band Edge(Hopping) ........................................................................................................................................................................ 34 7. Conducted RF Spurious Emission .................................................................................................................................................. 41 8. Restrict Band .................................................................................................................................................................................... 51 9. Carrier Frequencies Separation....................................................................................................................................................... 58 10. Number of Hopping Channel ......................................................................................................................................................... 61 11. Dwell Time ....................................................................................................................................................................................... 64 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0013-2 Page: 3 of 69 FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 32 4.95 2.5 NVNT 1-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 1-DH1 2480 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2402 Ant1 32.8 4.84 2.44 NVNT 2-DH1 2441 Ant1 32 4.95 2.5 NVNT 2-DH1 2480 Ant1 32.8 4.84 2.44 NVNT 3-DH1 2402 Ant1 32.8 4.84 2.44 NVNT 3-DH1 2441 Ant1 32 4.95 2.5 NVNT 3-DH1 2480 Ant1 32.8 4.84 2.44 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0013-2 Page: 4 of 69 FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0013-2 Page: 5 of 69 FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0013-2 Page: 6 of 69 FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0013-2 Page: 7 of 69 FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2402MHz Ant1 Duty Cycle NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0013-2 Page: 8 of 69 FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0013-2 Page: 9 of 69 FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 -0.399 21 Pass NVNT 1-DH1 2441 Ant1 -1.209 21 Pass NVNT 1-DH1 2480 Ant1 -1.986 21 Pass NVNT 2-DH1 2402 Ant1 1.979 21 Pass NVNT 2-DH1 2441 Ant1 1.111 21 Pass NVNT 2-DH1 2480 Ant1 0.339 21 Pass NVNT 3-DH1 2402 Ant1 2.646 21 Pass NVNT 3-DH1 2441 Ant1 1.775 21 Pass NVNT 3-DH1 2480 Ant1 0.974 2…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202305-0013-2 Page: 1 of 58 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2BA7O-SRBDLLCL Original Grant Report No. : TBR-C-202305-0013-2 Applicant : Super Real Business Deals LLC Equipment Under Test (EUT) EUT Name : Speakerbag Model No. : SRBDLLCL Series Model No. : Please refer to page 6 Brand Name : Super Real Sample ID : 202305-0013-1-1# & 202305-0013-1-2# Receipt Date : 2023-05-06 Test Date : 2023-05-06 to 2023-05-23 Issue Date : 2023-05-23 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Camille Li Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202305-0013-2 Page: 2 of 58 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 6 1.1 Client Information ................................................................................................................. 6 1.2 General Description of EUT (Equipment Under Test) ................................................... 6 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 8 1.4 Description of Support Units .............................................................................................. 8 1.6 Description of Test Software Setting .............................................................................. 10 1.7 Measurement Uncertainty ................................................................................................ 10 1.8 Test Facility ......................................................................................................................... 11 2. TEST SUMMARY ..................................................................................................................... 12 3. TEST SOFTWARE ................................................................................................................... 12 4. TEST EQUIPMENT .................................................................................................................. 13 5. CONDUCTED EMISSION ....................................................................................................... 15 5.1 Test Standard and Limit .................................................................................................... 15 5.2 Test Setup ........................................................................................................................... 15 5.3 Test Procedure ................................................................................................................... 15 5.4 Deviation From Test Standard ......................................................................................... 16 5.5 EUT Operating Mode ........................................................................................................ 16 5.6 Test Data ............................................................................................................................. 16 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 17 6.1 Test Standard and Limit .................................................................................................... 17 6.2 Test Setup ........................................................................................................................... 18 6.3 Test Procedure ................................................................................................................... 19 6.4 Deviation From Test Standard ......................................................................................... 21 6.5 EUT Operating Mode ........................................................................................................ 21 6.6 Test Data ............................................................................................................................. 21 7. EMISSIONS IN RESTRICTED BANDS ............................................................................... 22 7.1 Test Standard and Limit .................................................................................................... 22 7.2 Test Setup ........................................................................................................................... 22 7.3 Test Procedure ................................................................................................................... 23 7.4 Deviation From Test Standard ......................................................................................... 25 7.5 EUT Operating Mode ........................................................................................................ 25 Report No.: TBR-C-202305-0013-2 Page: 3 of 58 TB-RF-074-1.0 7.6 Test Data ............................................................................................................................. 25 8. 99% OCCUPIED AND 20DB BANDWIDTH ........................................................................ 26 8.1 Test Standard and Limit .................................................................................................... 26 8.2 Test Setup ...................................…

Text truncated - open the document above for the full version.

FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Appendix V EUT Test Photographs 15C Test Setup Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID:2BA7O-SRBDLLCL TB-RF-074-1.0 Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Conducted Emission -----END OF REPORT-----