2BA7T-FLEX-FLEXPROLaser Engraver

TCB CALL página 1 File FCC ID: 2BA7T-FLEX-FLEXPRO Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : Search | coloradosos.gov TCB CALL página 2 TCB CALL página 3 TCB CALL página 4 TCB CALL página 5 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

ShenzhenYikeTechnologyCo.,Ltd. 2.911(d)(7)USAAgentv1.5 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:ShenzhenYikeTechnologyCo.,Ltd. Address:No.422building1,MingLiangTechParkNo.178ZhuGuangnorthroad, NanShan,ShenZhen,China FCCID:2BA7T-FLEX-FLEXPRO 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[ShenzhenYikeTechnologyCo.,Ltd.]designate[LinkwldLLC] NOTE1 forthe purposeofacceptingserviceofprocessonbehalfoftheapplicant. Applicantconsent:Weacknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeouracceptance ofourobligationtomaintainanagentforserviceofprocessintheUnitedStatesforno lessthanoneyearaftereitherwethegranteehavepermanentlyterminatedall marketingandimportationoftheapplicableequipmentwithintheU.S.,oratthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolving theequipment,whicheverislater. Agentobligation:Weacknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,orattheconclusionofanyCommission-relatedadministrativeor judicialproceedinginvolvingtheequipment,whicheverislater. USAAgentApplicant Companyname:LinkwldLLCCompanyname:ShenzhenYike TechnologyCo.,Ltd. USAAddress:7595TechnologyWaySte 100,Denver,CO80237,US Address:No.422building1,MingLiangTech ParkNo.178ZhuGuangnorthroad, NanShan,ShenZhen,China FRNNumber:0033625682GranteeFRNNumber:0033777772 ContactName:TimothyZhuFCCGranteeCode:2BA7T TelephoneNo:(747)717-2691ContactName:AiranLu Email:[email protected]:18378597759 Email:[email protected] Signature: Signature: ShenzhenYikeTechnologyCo.,Ltd. 2.911(d)(7)USAAgentv1.5 Title:ManagerTitle:Manager Date:2026-08-18Date:2026-08-18 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 Shenzhen Yike Technology Co., Ltd. TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Yike Technology Co., Ltd. Grantee code: 2BA7T FCC ID: 2BA7T-FLEX-FLEXPRO FRN: 0033777772 Contact Name: Airan Lu Address: No.422 building1, MingLiang Tech Park No.178 ZhuGuang north road, NanShan, Shenzhen, China Telephone No: 18378597759 Fax No: 0755-23408309 Email: [email protected] i. [Shenzhen Yike Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen Yike Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen Yike Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026/08/18 Applicant’s Name: Airan Lu Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shenzhen Yike Technology Co., Ltd. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A Device Laser Engraver Company name Shenzhen Yike Technology Co., Ltd. Grantee code 2BA7T FCC ID 2BA7T-FLEX-FLEXPRO FRN 0033777772 Contact name Airan Lu Address No.422 building1, MingLiang Tech Park No.178 ZhuGuang north road, NanShan, Shenzhen, China Telephone number 18378597759 E-mail [email protected] Chipset/module information ESP32-C3 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications. 4 1 # Wireless Interface Purpose Justification 1 1 2 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Airan Lu Date: 2026/08/18

ShenzhenYikeTechnologyCo.,Ltd. ProductSimilarityDeclaration Productname:LaserEngraver Modelname:Flex,P2 FCCID:2BA7T-FLEX-FLEXPRO We(ShenzhenYikeTechnologyCo.,Ltd.)herebystatethatallthe modelsareelectricalidenticalincludingthesamesoftware parameterandhardwaredesign(i.e.,circuitdesign,PCBLayout, RFmodule/circuit,antennatype(s)andantennalocation, componentsonPCB,etc.,),samemechanicalstructureanddesign (includingproductenclosure,materials,etc.,),allsamplesarethe sameexceptthemodelname. Signature: Name:AiranLu Title:Manager 2026/8/18

C5266091_X10_Ed.2 1/1 ShenzhenYikeTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2026-08-18 Subject:RequestforConfidentiality FCCID:2BA7T-FLEX-FLEXPRO ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-TermConfidentiality NOTE2 IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo ☒ BlockDiagram ☒☐ Schematics ☒☐ TestReportNoNo TestSetupPhotosNo ☒ User’sManual ☐ NOTE 1 ☒ InternalPhotos ☐ NOTE 1 ☒ PartsList/TuneUp ☐☐ RFExposureInfoNoNo OperationalDescription ☒☐ CoverLetter(s)NoNo SDRSoftware/SecurityInfo ☐ No NOTE1:Long-TermConfidentialitymaybepermittedunderspecialconditions(SeeII.LONG-TERMCONFIDENTIALITY,Section3of KDB726920,uselastinforce) NOTE2:Short-TermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Incaseofshort-termConfidentiality,theapplicantrequeststheexhibitsselectedabove arewithheldfrompublicviewforaperiodof___180___daysfromthedateofthe GrantofEquipmentAuthorizationandpriortomarketing. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. C5266091_X10_Ed.2 1/1 Sincerely, Name:AiranLu Title:Manager 2026/8/18

C5266091_X8_Ed.1 1/1 Letter of Authorization Shenzhen Yike Technology Co., Ltd. Company: Shenzhen Yike Technology Co., Ltd. Address: No.422 building1, MingLiang Tech Park No.178 ZhuGuang north road, NanShan, Shenzhen, China Product Name: Laser Engraver Model Number: Flex, P2 FCC Identifier: 2BA7T-FLEX-FLEXPRO We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Airan Lu Date: 2026.08.18 Title: Manager Signature of applicant:

Flex 12W型材标贴（class 1） Paste Position Diagram Product Name: Laser Engraver Model: Flex Complies with 21 CFR 1040.10 and 1040.11 except for conformance with lEC60825-1 Ed.3., as described in Laser Notice No.56, dated May 8, 2019 Input Power: 24V 3A . that may cause undesired operation. CLASS 1 CONSUMER LASER PRODUCT Classification to IEC 60825-1:2014, EN 60825-1: 2014 + A11: 2021, BS EN 60825-1: 2014 + A11: 2021, EN 50689: 2021 尺寸：80x70mm 材质：75#PET 背胶哑膜 80mm R1 x 4 70mm www.ikier.com Manufactured by: Shenzhen AtomStack Technologies Co., Ltd. Address: 17th Floor, Building 3A, Phase ll, Intelligent Park, No. 76, Baohe Avenue, Baolong Street, Longgang Dist., Shenzhen,Guangdong, 518116, China. MADE IN CHINA Maximum output power: 12W Wavelength: 440nm±15nm FCC ID: 2BA7T-FLEX-FLEXPRO

MAXIMUMPERMISSIBLEEXPOSURE KDB447498D01MobileandPortableDevicesRFExposureProceduresand EquipmentAuthorizationPoliciesv06. 2.1091Radiofrequencyradiationexposureevaluation:mobiledevices. AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b) EUTSpecification FCCID2BA7T-FLEX-FLEXPRO EUTLaserEngraver Frequencyband(Operating)BT:2.402GHz~2.480GHz WLAN:2.412GHz~2.462GHz RLAN:5.180GHz~5.240GHz RLAN:5.260GHz~5.320GHz RLAN: 5.500 GHz~ 5.700 GHz RLAN:5.745GHz~5.825GHz Others: DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ ExposureclassificationOccupational/Controlledexposure GeneralPopulation/Uncontrolledexposure AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Antennagain(Max)2.45dBi EvaluationappliedMPEEvaluation SAREvaluation LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) AverageTime (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/150030 1500-100000----130 Friistransmissionformula:Pd=(Pout*G)\(4*pi*R2) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainMw G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE.Ifweknowthemaximumgainoftheantennaandtotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancewheretheMPElimitis reached. MeasurementResult OperatingMode Maximum output power (dBm) Tuneup tolerance (dBm) Max.Tuneup Power (dBm) Antenna Gain (dBi) Power densityat 20cm (mW/cm 2 ) Power density Limits (mW/cm 2 ) BLE1.551.55±12.552.450.00061 WiFi2.4G14.4214.42±115.422.450.01221 Note:BT&WiFicannotsupportsimultaneoustransmission.

Page 1 of 34 FCC Test Report Report No.:1812C60384512501 Applicant:Shenzhen Yike Technology Co., Ltd. Address: No.422 building1, MingLiang Tech Park No.178 ZhuGuang north road, NanShan, ShenZhen, China Product Name:Laser Engraver Report Date:2026-08-18 Shenzhen Anbotek Compliance Laboratory Limited #检测章# #资质章# #报告二维码# Report No.:1812C60384512501Page 2 of 34 FCC ID: 2BA7T-FLEX-FLEXPRO Contents 1. General Information ...............................................................................................................................6 1.1. Client Information ........................................................................................................................6 1.2. Description of Device (EUT) ........................................................................................................6 1.3. Auxiliary Equipment Used During Test........................................................................................7 1.4. Operation channel list..................................................................................................................7 1.5. Description of Test Mode(s) ........................................................................................................7 1.6. Measurement Uncertainty ...........................................................................................................8 1.7. Additional Instructions .................................................................................................................8 1.8. Test Summary .............................................................................................................................9 1.9. Description of Test Facility ........................................................................................................10 1.10. Disclaimer................................................................................................................................10 1.11. Test Equipment List.................................................................................................................11 2. Antenna requirement ...........................................................................................................................13 2.1. Conclusion.................................................................................................................................13 3. Conducted Emission at AC power line ................................................................................................14 3.1. EUT Operation ..........................................................................................................................14 3.2. Test Setup .................................................................................................................................14 3.3. Test Data ...................................................................................................................................15 4. 6dB Bandwidth ....................................................................................................................................17 4.1. EUT Operation ..........................................................................................................................17 4.2. Test Setup .................................................................................................................................18 4.3. Test Data ...................................................................................................................................18 5. Maximum Conducted Output Power....................................................................................................19 5.1. EUT Operation ..........................................................................................................................19 5.2. Test Setup .................................................................................................................................19 5.3. Test Data ...................................................................................................................................19 6. Power Spectral Density .......................................................................................................................20 6.1. EUT Operation ..........................................................................................................................20 6.2. Test Setup .................................................................................................................................20 6.3. Test Data ...................................................................................................................................20 7. Emissions in non-restricted frequency bands ......................................................................................21 7.1. EUT Operation ..........................................................................................................................21 7.2. Test Setup .................................................................................................................................21 7.3. Test Data ...................................................................................................................................21 8. Band edge emissions (Radiated) ........................................................................................................22 8.1. EUT Operation ..........................................................................................................................22 8.2. Test Setup .................................................................................................................................23 8.3. Test Data ...................................................................................................................................24 9. Emissions in restricted frequency bands (below 1GHz) .................................................…

Text truncated - open the document above for the full version.

SHENZHEN SUNSHOW INDUSTRIAL CO.LTD Room 301, Building A, Taihe Community, Zhongxin Community, Pingdi Sub-district, Longgang District, Shenzhen City 1 / 10 APPROVAL SHEET CUSTOMER SUNHOW жAdmitted that book in triplicate, please signed by your company. Customer Shenzhen Yuanzhi Intelligent Manufacturing Technology Co., Ltd. Room 203, Building A, No. 210 Middle Wanfeng Road, Wanfeng Community, Xinqiao Street, Bao'an District, Shenzhen City, Guangdong Province, China Customer Model HYY-000569-(C13-0122-0AA1) Product Specifications: 1st Generation IPEX / FPC-36.81*13.05 with 1.13 coaxial cable / L=120mm / black / Silk screen: SX-720S-WIFI V1.0 (cable length L=120mm) Customer Part Number S X Part Number SX-2.4G-120 Issued Date 2025-09-12 QUALITY DEPT ENGINEER R&D DEPT APPROVED WRITTEN BY ENGINEER R&D DEPT APPROVED address SHENZHEN SUNSHOW INDUSTRIAL CO.LTD 2 / 10 Index 一、 （Cover）························1 二、 （Index）························2 三、 （Antenna basic parameters）···········3 四、 （Test Equipment & Conditions）···········4 五、 （Test Data）····················5-6 六、 （Product Drawing）·················7 七、 （Manner of packing） ················8 SHENZHEN SUNSHOW INDUSTRIAL CO.LTD 3 / 10 Specification sheet RF Cabie Assembiy Specification Main teclmlcal specification Frequency Range （MHz） 2400-2500 Impedance 50 Average Efficiency 55.3% MAX Gain 2.45 dbi Physica Properties Cable Type Black Connector IPEX 1 Storage Temp -20°C~+70°C Operating Temp -20°C~+60°C SHENZHEN SUNSHOW INDUSTRIAL CO.LTD 4 / 10 4.Test project and test equipment Test project Testing equipment 1.S11 test 1（Return Loss） 2.（VSWR） Network analyzer ：Agilent E5071C 2. PASSIVE TEST DATE 1.（Gain） 2.（Efficiency） 1.OTA Microwave darkroom：ETS 5x3x3 m (3D) Chamber 2. Wireless broadband signal tester:: Rohde & Schwarz CMW500 SHENZHEN SUNSHOW INDUSTRIAL CO.LTD 5 / 10 5. Electrical performance testing -S11 Frequency band 2412Mhz 2472Mhz 1.（Return Loss） -20.87 -16.43 2.（VSWR） 1.19 1.3 SHENZHEN SUNSHOW INDUSTRIAL CO.LTD 6 / 10 5.1 OTA PASSIVE TEST Efficiency&Gain Frequency (MHz) Efficiency (%) Gain (dBi) 2400 39.04 0.57 2410 39.33 0.44 2420 39.76 0.28 2430 45.04 0.64 2440 54.41 1.34 2450 61.68 1.89 2460 60.96 1.77 2470 67.45 2.09 2480 65.53 2.41 2490 68.27 2.13 2500 67.85 2.45 SHENZHEN SUNSHOW INDUSTRIAL CO.LTD 7 / 10 5.2 OTA PASSIVE TEST 图 2D 图 2D 图 2D 图 SHENZHEN SUNSHOW INDUSTRIAL CO.LTD 8 / 10 6.1 Product layout drawing SHENZHEN SUNSHOW INDUSTRIAL CO.LTD 9 / 10 6.2 Physical diagram SHENZHEN SUNSHOW INDUSTRIAL CO.LTD 10 / 10

ReportNo.:1812C60384512501-01 Page 1 of 33 AppendixTestData ReportNo.:1812C60384512501-01TestSampleNo.:1-2-2 StartTestDate:2026-7-31FinishTestDate:2026-8-4 TestEngineer:Auditor: Temperature:24.5°CRelativeHumidity:64% Pressure:100.1kPa AppendixA:6dBBandwidth TestResult TestModeAntennaFrequency[MHz] 6dBBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt124020.6242401.6842402.3080.5PASS BLE_1MAnt124400.6642439.6642440.3280.5PASS BLE_1MAnt124800.6722479.6602480.3320.5PASS BLE_2MAnt124021.0202401.4602402.4800.5PASS BLE_2MAnt124401.0802439.4562440.5360.5PASS BLE_2MAnt124801.0682479.4682480.5360.5PASS ReportNo.:1812C60384512501-01 Page 2 of 33 TestGraphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS ReportNo.:1812C60384512501-01 Page 3 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS ReportNo.:1812C60384512501-01 Page 4 of 33 BLE_2M-Ant1-2440-PASS BLE_2M-Ant1-2480-PASS ReportNo.:1812C60384512501-01 Page 5 of 33 AppendixB:99%OccupiedBandwidth TestResult TestModeAntennaFrequency[MHz]OCB[MHz]FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt124021.02772401.48702402.5147------ BLE_1MAnt124401.01612439.49122440.5073------ BLE_1MAnt124801.01982479.49062480.5104------ BLE_2MAnt124022.06322400.97052403.0337------ BLE_2MAnt124402.03902438.99402441.0330------ BLE_2MAnt124802.04492478.98802481.0329------ ReportNo.:1812C60384512501-01 Page 6 of 33 TestGraphs BLE_1M-Ant1-2402 BLE_1M-Ant1-2440 ReportNo.:1812C60384512501-01 Page 7 of 33 BLE_1M-Ant1-2480 BLE_2M-Ant1-2402 ReportNo.:1812C60384512501-01 Page 8 of 33 BLE_2M-Ant1-2440 BLE_2M-Ant1-2480 ReportNo.:1812C60384512501-01 Page 9 of 33 AppendixC:Maximumconductedoutputpower TestResultPeak Test Mode Antenna Frequency [MHz] ConductedPeak Power[dBm] Conducted Limit[dBm] Verdict BLE_1MAnt124020.65≤30PASS BLE_1MAnt124401.29≤30PASS BLE_1MAnt124801.49≤30PASS BLE_2MAnt124020.72≤30PASS BLE_2MAnt124401.38≤30PASS BLE_2MAnt124801.55≤30PASS ReportNo.:1812C60384512501-01 Page 10 of 33 TestGraphsPeak BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS ReportNo.:1812C60384512501-01 Page 11 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS ReportNo.:1812C60384512501-01 Page 12 of 33 BLE_2M-Ant1-2440-PASS BLE_2M-Ant1-2480-PASS ReportNo.:1812C60384512501-01 Page 13 of 33 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict BLE_1MAnt12402-14.66≤8.00PASS BLE_1MAnt12440-13.98≤8.00PASS BLE_1MAnt12480-13.76≤8.00PASS BLE_2MAnt12402-16.53≤8.00PASS BLE_2MAnt12440-16.03≤8.00PASS BLE_2MAnt12480-15.72≤8.00PASS ReportNo.:1812C60384512501-01 Page 14 of 33 TestGraphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2440-PASS ReportNo.:1812C60384512501-01 Page 15 of 33 BLE_1M-Ant1-2480-PASS BLE_2M-Ant1-2402-PASS ReportNo.:1812C60384512501-01 Page 16 of 33 BLE_2M-Ant1-2440-PASS BLE_2M-Ant1-2480-PASS ReportNo.:1812C60384512501-01 Page 17 of 33 AppendixE:Bandedgemeasurements TestResult Test Mode AntennaChName Frequency [MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict BLE_1MAnt1Low2402-1.29-50.12≤-21.29PASS BLE_1MAnt1High24800.32-49.61≤-19.68PASS BLE_2MAnt1Low2402-2.20-49.12≤-22.2PASS BLE_2MAnt1High2480-1.76-49.92≤-21.76PASS ReportNo.:1812C60384512501-01 Page 18 of 33 TestGraphs BLE_1M-Ant1-2402-PASS BLE_1M-Ant1-2480-PASS ReportNo.:1812C60384512501-01 Page 19 of 33 BLE_2M-Ant1-2402-PASS BLE_2M-Ant1-2480-PASS ReportNo.:1812C60384512501-01 Page 20 of 33 AppendixF:ConductedSpuriousEmission TestResult TestModeAntenna Frequency [MHz] Freq.Range [MHz] Ref.Level [dBm] Result [dBm] Limit [dBm] Verdict BLE_1MAnt124020~Reference0.030.03---PASS BLE_1MAnt1240230~10000.03-51.75≤-19.97PASS BLE_1MAnt124021000~265000.03-37.29≤-19.97PASS BLE_1MAnt124400~Reference-0.35-0.35---PASS BLE_1MAnt1244030~1000-0.35-51.73≤-20.35PASS BLE_1MAnt124401000~26500-0.35-37.06≤-20.35PASS BLE_1MAnt124800~Reference1.111.11---PASS BLE_1MAnt1248030~10001.11-51.88≤-18.89PASS BLE_1MAnt124801000~265001.11-36.55≤-18.89PASS BLE_2MAnt124020~Reference-0.94-0.94---PASS BLE_2MAnt1240230~1000-0.94-51.71≤-20.94PASS BLE_2MAnt124021000~26500-0.94-36.6≤-20.94PASS BLE_2MAnt124400~Reference1.141.14---PASS BLE_2MAnt1244030~10001.14-50.15≤-18.86PASS BLE_2MAnt124401000~265001.14-36.29≤-18.86PASS BLE_2MAnt124800~Reference1.021.02---PASS BLE_2MAnt1248030~10001.02-51.26≤-18.98PASS BLE_2MAnt124801000~265001.02-36.67≤-18.98PASS Remark:Regardingthespuriousemissionsfrom30MHzto26.5GHz,thecablelosshavebeensetinthe'Input Correction'oftheSpectrumAnalyzerduringthetest. ReportNo.:1812C60384512501-01 Page 21 of 33 TestGraphs BLE_1M-Ant1-2402-0~Reference-PASS BLE_1M-Ant1-2402-30~1000-PASS ReportNo.:1812C60384512501-01 Page 22 of 33 BLE_1M-Ant1-2402-1000~26500-PASS BLE_1M-Ant1-2440-0~Reference-PASS ReportNo.:1812C60384512501-01 Page 23 of 33 BLE_1M-Ant1-2440-30~1000-PASS BLE_1M-Ant1-2440-1000~26500-PASS ReportNo.:1812C60384512501-01 Page 24 of 33 BLE_1M-Ant1-2480-0~Reference-PASS BLE_1M-Ant1-2480-30~1000-PASS ReportNo.:1812C60384512501-01 Page 25 of 33 BLE_1M-Ant1-2480-1000~26500-PASS BLE_2M-Ant1-2402-0~Reference-PASS ReportNo.:1812C60384512501-01 Page 26 of 33 BLE_2M-Ant1-2402-30~1000-PASS BLE_2M-Ant1-2402-1000~26500-PASS ReportNo.:1812C60384512501-01 Page 27 of 33 BLE_2M-Ant1-2440-0~Reference-PASS BLE_2M-Ant1-2440-30~1000-PASS ReportNo.:1812C60384512501-01 Page 28 of 33 BLE_2M-Ant1-2440-1000~26500-PASS BLE_2M-Ant1-2480-0~Reference-PASS ReportNo.:1812C60384512501-01 Page 29 of 33 BLE_2M-Ant1-2480-30~1000-PASS BLE_2M-Ant1-2480-1000~26500-PASS ReportNo.:1812C60384512501-01 Page 30 of 33 AppendixG:DutyCycle TestResult TestModeAntenna Frequency [MHz] ONTime [ms] Period [ms] DutyCycle [%] DutyCycle Factor[dB] BLE_1MAnt124022.102.5084.000.76 BLE_1MAnt124402.082.4983.530.78 BLE_1MAnt124802.082.4983.530.78 BLE_2MAnt124021.051.8855.852.53 BLE_2MAnt124401.061.8756.682.47 BLE_2MAnt124801.071.8856.912.45 ReportNo.:1812C60384512501-01 Page 31 of 33 TestGraphs NTNV-BLE_1M-Ant1-2402 NTNV-BLE_1M-Ant1-2440 ReportNo.:1812C60384512501-01 Page 32 of 33 NTNV-BLE_1M-Ant1-2480 N…

Text truncated - open the document above for the full version.