2BA8I-PROwireless scent diffuser

1 WI R E L E SS P R O INSTRUCTION AND CARE MANUAL 2 WELC OM E Welc ome to the world of Ar oma360 Luxur y Scenting! Introducing the Wir eless Pro, your gateway to cr afting a trul y di stincti ve atmosphere WHAT ’ S I NCLU DED: Adapter Wireless Pro Charging Base Remote Control Wireless Pro 3 Scan the QR code to watch the startup video and explore the full range of por table luxur y scenting. Table of Contents: What’s I ncluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About t he Wir ele ss Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 War ranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Wir ele ss Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Adding your Wir ele ss Pro Oil . . . . . . . . . . . . . . . . . . . . . . 7 Wir ele ss Pro LED Color Key . . . . . . . . . . . . . . . . . . . . . . 8 Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . 9 Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 Troubleshooting Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Wir ele ss Pro EOL Disposal. . . . . . . . . . . . . . . . . . . . . . . .12 4 Embark on your scenting journey with the user-fr iendly Wireless Pro. Its sleek and portable design, coupled with waterless and heatless operation, makes it a convenient choice. Experience plug and play portabili ty and residue-free and safe scenting experience for both pets and children. ABOU T TH E WIR ELE S S PRO SPECIF IC ATIONS 1.8 lb 0.6 lb Char ging Cable length15 0cm Char ging Power11W Si ze2.5’’ diameter , 1 1.5’’ tall without char ging base . 12’’ tall with char ging base . Oil bottle capacity50ml Coverage100-300 CBM / 400sq.ft. Cor dDC 13.7V 1.2A Noise< 45dB Life span of motor 5 The Wireless Pro is backed by a 90-day warranty, commencing from the dat e of purchase. This warranty covers new machines exclusively and does not extend repair services and replacement parts to ensure your sat is fa ction wi th the Wireless Pro. It is important to note that the warranty does not cover Aroma360 fragrance oils , as they are sold separat ely. The original order number is required for the war ranty process. War ranty Exclusions: • Use of non-Ar oma360 oil s. • Damage caused by accidents or fir e. • Repairs conducted by unauthorized sources. • Damage during transpor ta tion. • Failure to follow proper cleaning procedures. • Use of non-Ar oma360 parts. • Retur ns without proper authorization. WAR R AN T Y 6 WI R E L E S S P R O Unlock Diuser Head Wireless Pro Charging Base Power Button Battery LED Indicator Connect on Charging Base Lock Wireless Pro Charging Base Indicator Bluetooth and Working Status Indicator Wireless Pro Charging Base Indicator 7 To unlock your Wireless Pro, fi rmly hold the head counterclockwise. With your Wireless Pro Fragrance Oil One Time Use bottle (sold separately), screw the bottl e it by rotating the unit clockwise until it locks in place. Important! Make sure the bottl e is screwed in tight and paralle l to the top half of the Wireless Pro. A D D I NG Y O U R WI R E L E S S P RO OIL 8 Green LED Light < 100% Yellow LED Light < 70% Red LED Light < 30% Blue LED Light - Indicates Wireless Pro is turned on Flashing Blue LED Light- Indicates Wireless Pro is communicating with the remote. Red LED Light WI R E L E S S P RO L E D C O L OR K E Y Char ging Not e: • The Wir eless Pro receives a full char ge within 6-8 hours on the char ging base . • The Wir ele ss Pro functions por tably for 12 hours. How to use the Wir eless Pro Charging Base Connect the USB-C adapter to the Wireless Pro charger port (located on the Wireless Pro Charging Base) and plug it into a 110V power outlet. Position the power cord to prev ent it from being a tripping hazard. Green LED Light - Indicates Wireless Pro Charg ing Base power Blue LED Light - Indicates Wireless Pro Charg ing Base is charg ing Wireless Pro Power 9 R E M O TE C O N TROL F U N C TIONS Remove the plastic from the bot tom of t he remote covering the batter y. Diusing for 15 seconds Pausing for 5 minutes Diusing for 15 seconds Pausing for 3 minutes Diusing for 15 seconds Pausing for 1 minute Power Button Ensur e the Wir ele ss Pro unit i s t ur ned OFF. While pr essing the power button on the remote, pr ess the power button simul taneously on the Wir ele ss Pro to sync. You will then se e the Blue LED Light on the Wir eless Pro blinking, indicating that the remote and the Wir eless Pro have connected. Note: Please follow the syncing instructions if the remote is not connected to the Wireless Pro. Note: If the remote is mistakenly misplaced, The Wireless Pro is still usable. Press and hold the power button for five How to sync remote to Wir ele ss Pro Set t he concentration leve l t hat f its your mood and start t he Aroma360 Exp er ience. 10 C A U T I O N To ensure safe usage, follow these precautions To pr event damage to the unit, it is impor tant not to tur n the Wir eless Pro upside down while there is oil in side. Thi s pr ecautionar y measur e ensur es the pr oper functioning and longevity of t he devic e. Cleaning Kit Sold Separetely. To avo id leakage and pot enti al damage, it is cr ucial to keep the Wir ele ss Pro in an upright posi tion at all times. Avo id til ting or pl ac ing the devic e on its side, as thi s can lead to unwanted leaks and har m the unit. For optimal per formance, i t i s re commended to clean the unit every 2 months by running alcohol thr ough cleaning process help s remove any residue and maintain the functionali ty of t he unit. Please refr ain from attempting to di sassemble the unit. If you encounter any i ssues with the unit, we recommend reaching out t o our suppor t t eam by emailing suppor [email protected]. 11 WI R E LESS TRO U BLE SHOOT I NG G U I D E PROBLEMSOLUTION Motor Running but Device not Scenting Make sure there is oil in the bottle and the bottle is screwe…

Text truncated - open the document above for the full version.

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Guangdong Grasse Environmental Technology Co.,Ltd. FRN: 0033781873 Grantee code: 2BA8I FCC ID: 2BA8I-PRO Contact Name: Zhubin Li Address: No 670,GuangCong Five road, Zhongluotan Town,Baiyun District,Guangzhou Telephone: +86-18622470932 Fax: 86-755-29113135 E-mail: [email protected] i. [Guangdong Grasse Environmental Technology Co.,Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Guangdong Grasse Environmental Technology Co.,Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Guangdong Grasse Environmental Technology Co.,Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2023/12/21 Applicant’s Name: Zhubin Li Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: UGK-LVM UNITED INC FRN: 0033476375 Contact Name: Jimmychen Address: 6547 N Academy Blvd #2266,Colorado Springs,CO 80918 United Statees Telephone No: 001-323-510-4660 Email: [email protected] Applicant: Company name: Guangdong Grasse Environmental Technology Co.,Ltd. FRN: 0033781873 Grantee code: 2BA8I FCC ID: 2BA8I-PRO Contact Name: Zhubin Li Address: No 670,GuangCong Five road, Zhongluotan Town,Baiyun District,Guangzhou Telephone: +86-18622470932 Fax: 86-755-29113135 E-mail: [email protected] [Guangdong Grasse Environmental Technology Co.,Ltd.] certifies that, as of the date of this filing of the application with the TCB, [UGK-LVM UNITED INC] is our designated US agent for service of process for the above referenced FCC ID. [Guangdong Grasse Environmental Technology Co.,Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [UGK-LVM UNITED INC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2023/12/21 Applicant’s Name: Zhubin Li US Agent’s Name: Jimmychen Title: Manager Title: Manager Signature Signature

Guangdong Grasse Environmental Technology Co.,Ltd. 1/1 Letter of Authorization Company: Guangdong Grasse Environmental Technology Co.,Ltd. Address: No 670,GuangCong Five road, Zhongluotan Town,Baiyun District,Guangzhou Product Name: wireless scent diffuser Model Number: Wireless Pro FCC Identifier: 2BA8I-PRO We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Zhubin Li Date: 2023-12-21 Title: Manager Signature of applicant:

Guangdong Grasse Environmental Technology Co.,Ltd. 1/1 Date: 2023-12-21 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2BA8I-PRO To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual No ☐ Internal Photos No ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Zhubin Li Date: 2023-12-21 Title: Manager Signature of applicant:

Size: 10*5 mm M/N: Wireless Pro FCC ID: 2BA8I-PRO Label location

Coil Antenna

FCC ID:2BA8I-PRO Product Name: wireless scent diffuser Trade Mark: N/A Model No.: Wireless Pro Model Difference: N/A Transmitting mode Keep the EUT in continuously wireless charging mode Power supply: Input: 13.7V1.2A Watch wireless output:11W Adapter: MODEL:QL018-1371200U INPUT: 100-240V~ 50/60Hz 0.6A OUTPUT: 13.7V1.2A Date of Receipt: Dec. 06, 2023 Test Date: Dec. 06, 2023 - Dec. 15, 2023 Date of Report: Dec. 15, 2023 Test Modes: Mode1. Watch wireless output Mode(11W) Note: 1. We have evaluated 1%, 50% and 99% battery charging mode, and the worst mode (99%) is showed in this report. RF Exposure Evaluation 1 Measuring Standard KDB 680106 D01 RF Exposure Wireless Power Transfer v04 2 Requirements According to the item 5 of KDB 680106 v04: Inductive wireless power transfer applications that meet all of the following requirements are excluded from submitting an RF exposure evaluation. (1) The power transfer frequency is below 1 MHz. Yes; the device operate in the frequency range from 150KHz (2) The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts. Yes; the maximum output power of the primary coil is 11W. (3) For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiating structures operating at maximum power at the same time, as per design conditions. If the design allows one or more radiating structures to be powered at a higher level while other radiating structures are not powered, then those cases must be tested as well. For instance, a device may use three RF coils powered at 5 W, or one coil powered at 15 W: in this case, both scenarios shall be tested. Yes; the transfer system includes only one primary coils. (4) A client device providing the maximum permitted load is placed in physical contact with the transmitter (i.e., the surfaces of the transmitter and client device enclosures need to be in physical contact) Yes; Client device is placed directly in contact with the transmitter. (5) Only § 2.1091-Mobile exposure conditions apply (i.e., this provision does not cover § 2.1093-Portable exposure conditions). Yes, mobile exposure conditions only. (6) The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. These measurements shall be taken along the principal axes of the device, with one axis oriented along the direction of the estimated maximum field strength, and for three points per axis or until a 1/d (inverse distance from the emitter structure) field strength decay is observed. Symmetry considerations may be used for test reduction purposes. The device shall be operated in documented worst-case compliance scenarios (i.e., the ones that lead to the maximum field components), and while all the radiating structures (e.g., coils or antennas) that by design can simultaneously transmit are energized at their nominal maximum power. Yes, see test result in item 8. from the surface from all coils that by design can simultaneously transmit, and while those coils are simultaneously energized, are demonstrated to be less than 50% of the applicable MPE limit. Remark: Meet all the above requirements. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) 3 Test Setup 4 Test Procedure 1) The RF exposure test was performed in anechoic chamber. 2) The measurement probe was placed at test distance (20 cm from all sides and 20 cm from the top) which is between the edge of the charger and the geometric center of probe. 3) The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. 4) The EUT was measured according to the dictates of KDB 680106 v04. Remark：The EUT’s test position A, B, C, D and E is valid for the E and H field measurements. 5 Description of Support Units None. 6 Test Instruments list Test Equipment Manufacturer Model No. SN. Cal.Date (mm-dd-yy) Cal.Due date (mm-dd-yy) Exposure Level Tester Narda ELT-400 N-0231 June. 25 2023 June. 26 2024 Magnetic field probe 100cm 2 Narda ELT probe 100cm 2 M0675 June. 25 2023 June. 26 2024 Field Probe ETS HI-6105 / June. 25 2023 June. 26 2024 Laser Data Interface ETS HI-6113 / June. 25 2023 June. 26 2024 7 Test Uncertainty E-Filed Strength : ±0.08V/m H-Filed Strength : ±0.02A/m 8 Test Result E-Filed Strength at 20 cm from the edges surrounding the EUT (V/m) Frequency Range (MHz) Test Position A Test Position B Test Position C Test Position D Limits (V/m) 0.150 0.22 0.16 0.19 0.18 614 E-Filed Strength at 20 cm from the top of the EUT (V/m) Frequency Range (MHz) Test Position E Limits (V/m) 0.150 0.17 614 H-Filed Strength at 20 cm from the edges surrounding the EUT (A/m) Frequency Range (MHz) Test Position A Test Position B Test Position C Test Position D Limits (A/m) 0.150 0.07 0.16 0.08 0.13 1.63 H-Filed Strength at 20 cm from the top of the EUT (A/m) Frequency Range (MHz) Test Position E Limits (A/m) 0.150 0.15 1.63 9 Test Set-up Photo

acknowledgement Client name: Customer Material Number: Our model: A11-G44-6.5UH-30MM Delivery date: Supplier: Drawn Audit Approval Wang Lizhi Deng Xianggui Lu Rusheng The client admitted: adjunctive Disjunctive Admit Reserve Tel: Fax: Address: Customer Model No. Our model number Edition Date A11-G44-6.5UH-30MM A0 2023.12.6 1.Structure drawing: Unit: M M 1 2 1 2 2.Product parameters: Foot Line Number of Remarks 1-20.08 * 105 p 10 Silk-covered 3.Technical requirements: 1.Fix the end of the wire to prevent loose and broken wires 2.According to customer requirements to cut the too long thread, tin plating, tin plating depth of 3±1MM 3.Dot the magnetic disc with appropriate white glue and attach the coil, making sure the surface of the product is clean and tidy during the process 4.The magnetic disc used is with a round hole, and the L-shaped outlet slot is not damaged A B C D E F G H I J K L 4.Electrical parameters: 1.Inductance value, Q value: Pin1-2 = 6.5uH ±0.3uH Q value ≥50 The above inductance values are based on Quanhua 1062A equipment, 10KHZ/0.3Vrms as the standard or equivalent instrument. Q value is based on Quanhua 1062A equipment, 100KHZ/0.3Vrms as the standard or equivalent equipment 5. Material list: Seria Name Material Supplier Remarks 1 Silk-covered Wire 0.08 X105P Vihan or 2 Magnetic G44X5.2X1.0 Hard base material Tiantong or 3 tin High temperature Thousand 4 White BY882 Treasure Moon or 5 Back glue 42 White back glue 6 High temperature 5MM manufacturer:Guangzhou Tianbao Electronics Co., LTD address：Guangzhou Zengcheng District, Shitan Town, Shazhuang Jianglong Road south 16 second floor

Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20231214029-2E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 16 TEST REPORT FCC ID: 2BA8I-PRO Applicant: Guangdong Grasse Environmental Technology Co.,Ltd. Address: No 670,GuangCong Five road, Zhongluotan Town,Baiyun District,Guangzhou Manufacturer: Guangdong Grasse Environmental Technology Co.,Ltd. Address: No 670,GuangCong Five road, Zhongluotan Town,Baiyun District,Guangzhou EUT: wireless scent diffuser Trade Mark: N/A Model Number: Wireless Pro Date of Receipt: Dec. 06, 2023 Test Date: Dec. 06, 2023 - Dec. 15, 2023 Date of Report: Dec. 15, 2023 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No.8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China Applicable Standards: FCC PART 15 Subpart C ANSI C63.10:2013 Test Result: Pass Report Number: DL-20231214029-2E Prepared (Engineer): Alisa Song Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20231214029-2E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 16 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ....................................................................................................................................................... 3 2. TEST SUMMARY ......................................................................................................................................... 3 3. GENERAL INFORMATION ......................................................................................................................... 4 4. TEST INSTRUMENT USED ........................................................................................................................ 5 5. CONDUCTED EMISSION TEST ................................................................................................................ 6 6. RADIATION EMISSION TEST ................................................................................................................. 10 7. BANDWIDTH TEST ................................................................................................................................... 15 8. ANTENNA REQUIREMENT ..................................................................................................................... 16 9. SETUP PHOTOGRAPHS .......................................................................................................................... 16 10. EUT PHOTOGRAPHS ........................................................................................................................... 16 Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20231214029-2E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 16 1. VERSION Version No. Date Description 00 Dec. 15, 2023 Original 2. TEST SUMMARY EMC Emission Test Item Section in CFR 47 Result Remark AC Power Line Conducted Emission 15.207 PASS Spurious Emission 15.209(a)(f) PASS 20dB Bandwidth 15.215 PASS Antenna requirement 15.203 PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report (2) Test Facility: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No.8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China FCC Test Firm Registration Number: 854456 Designation Number: CN1307 IC Registered No.: 27485 CAB ID.: CN0118 Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20231214029-2E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 16 3. GENERAL INFORMATION 3.1 Description of Device (EUT) Product Name: wireless scent diffuser Trade Mark: N/A Model No.: Wireless Pro Model Difference: N/A Serial No.: N/A Hardware version: H1.0 Software version: S1.0 Operation Frequency: 150KHz Modulation type: MSK Antenna Type: Inductive loop coil Antenna Antenna gain: 0dBi Power supply: DC 13.7V from adapter Charging Power: 11W Adapter: MODEL:QL018-1371200U INPUT: 100-240V~ 50/60Hz 0.6A OUTPUT: 13.7V1.2A 3.2 Tested System Details None. 3.3 Block Diagram of Test Set-up 3.4 Test Mode Description Mode1: wireless output Mode(11W) Note: We have evaluated 1%, 50% and 99% battery charging mode, and the worst mode (99%) is showed in this report. 3.5 Test Auxiliary Equipment None. 3.6 Test Uncertainty Conducted Emission Uncertainty(150KHz-30MHz) : ±2.56dB 20dB Bandwidth : ±0.5kHz Radiated Emission Uncertainty(9KHz-1GHz) : ±3.24dB AC Mains EUT Adapter Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20231214029-2E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 16 4. TEST INSTRUMENT USED For Conducted Emission Test (843 Shielded Room) Equipment Manufacturer Model Serial Last Cal. Next Cal. 843 Shielded Room ChengYu 843 Room 843 Sep. 20, 2022 Sep. 19, 2025 EMI Receiver R&S ESR 101421 Nov. 04, 2023 Nov. 03, 2024 LISN R&S ENV216 102417 Nov. 04, 2023 Nov. 03, 2024 Clamp COM-POWER CLA-050 431071 Nov. 04, 2023 Nov. 03, 2024 3-Loop Antenna DAZE ZN30401 13021 Nov. 04, 2023 Nov. 03, 2024 ISN T8 Schwarzbeck NTFM 8158 101135 Nov. 04, 2023 Nov. 03, 2024 ISN T5 Schwarzbeck NTFM 8158 101136 Nov. 04, 2023 Nov. 03, 2024 843 Cable 1# ChengYu CE Cable 001 Nov. 04, 2023 Nov. 03, 2024 843 Cable 1# ChengYu CE Cable 002 Nov. 04, 2023 Nov. 03, 2024 For Radiated Emission Test (966 chamber) Equipment Manufacturer Model Serial Last Cal. Next Cal. 966 Chamber ChengYu 966 Room 966 Sep. 20, 2022 Sep. 19, 2025 Spectrum Analyzer Agilent E4408B MY50140780 Nov. 04, 2023 Nov. 03, 2024 EMI Receiver R&S ESRP7 101393 Nov. 04, 2023 Nov. 03, 2024 Amplifier Schwa…

Text truncated - open the document above for the full version.

Radiated Measurement Photos Conducted Measurement Photos