2BAA5-MNX6X6

User Manual Party Party Party ALL-IN-ONE PA SPEAKER INDEX Warnings ............................................................................................................................... ............................................................................................................................... 2 User’s General Instructions ................................................................................................ 4 Features and Functions ................................................................................................. 5 Warranty 7 ........................................................................................................................ 6 2 - Monster Rockin’ Roller Party - AC Power Cable - Wired Microphone - Telescoping Tripod Speaker Stand - User Manual (with Warranty Statement) - Quick Start Guide IC Statement: This devicecomplieswith IndustryCanada’s licence‐exemptRSSs.Operationis subjectto the followingtwo conditions: (1) This devicemay not causeinterference;and (2)This devicemust acceptany interference,includinginterferencethat may cause undesiredoperationof the device. Le pr ésent appareilest conformeaux CNR d'IndustrieCanadaapplicablesaux appareilsradio exemptsde licence.L'exploitationest autorisée aux deux conditionssuivantes: (1) l'appareil ne doit pas produirede brouillage,et (2) l'utilisateurde l'appareildoit acceptertout brouillage radio électriquesubi, même si le brouillageest susceptibled'en compromettrele fonctionnement. 3 CONTROLS AND CONNECTIONS 1. LED Display 2. USB (MP3 Playback) Port 3. BT (Bluetooth® Source) Button 4. Source Button 5. Previous (back arrow) Button 6. Next (forward arrow) Button 7. Play (/Pause) Button 8. Number (Preset) Buttons 9. Master Volume Knob 10. Microphone 1 Gain Knob 11. Microphone 2 Gain Knob 12. Microphone 1 Echo Knob 13. Microphone 2 Echo Knob 14. Microphone 1 (/Instrument) ¼" Input 15. Microphone 2 (/Instrument) ¼" Input 16. Microphone 1 XLR Input 17. Microphone 2 XLR Input 18. AC Input 19. Repeat Button 20. Power (Green) LED Indicator Light 21. Bluetooth® (Blue) LED Indicator Light 22. Lighting Button 23. TWS (Connection) Button 24. Bass (Boost) Button 25. Bass/Treble Button 26. AUX-in (3.5mm) 27. Microphone XLR-In 28. Microphone XLR-Out 29. On/O Switch 30. Segment LED 31. Power Icon 32. USB Audio Source Icon 33. AUX- In Source Icon 34. FM Radio Icon 35. Bluetooth® Source Icon 4 4 5 10 11 14 15 16 18 30 17 13 12 2 119 22 23 24 25 6 7 9 8 21 27 26 28 29 20 3 31 32 34 35 33 5 Power ON/OFF Switch: • Toggle switch to ON position: 1. Green power LED Indicator light and LED Display will power on. 2. The unit voice promp will say, “Power on.” 3. Automatically enters into Bluetooth® pairing status •Toggle switch to OFF position: 1. All LED Indicators and LED Display will turn o. 2. The unit voice promp will say, “Power o,” before powering down. Play (/Pause) Button: • Play/Pause Button only works with Bluetooth® source: • While audio is playing, press the Play Button to pause playback. • While audio is paused, press the Play Button to resume playback. BT (Bluetooth®) Button: • Switch to Bluetooth® Audio Source: 1. While in another audio source, press the BT Button to switch to Bluetooth® mode or cycle though audio sources using the source button. 2. The unit will automaticelly disconnect from the current device. • Bluetooth® pair audio device: 1. Set unit source to Bluetooth®. 2. Long press BT Button for 2 seconds to enter into pairing status. 3. Select “MNX6” from your Bluetooth® enabled audio device. 4. The unit voice promp will say, “Connected,” when successfully paired. 5. The blue Bluetooth® indicator light will remain on. 6. If the signal moves out of range the blue Bluetooth® indicator light will blink and disconnect if the connection is not restablished after 5 minutes. • Disconnnect Bluetooth® audio device connection: 1. Set unit source to Bluetooth®. 2. Long press BT Button for 2 seconds to enter into pairing status. 3. The unit voice promp will say, “Disconnected.” 4. The blue Bluetooth® LED Indicator light will begin to ash. 5. Unit will enter pairing status. 6. The unit voice promp will say, “Pairing.” • Clear Bluetooth® pairing history: 1. Set unit source to Bluetooth®. 2. Long press BT Button for 8 seconds to clear information. 3. Unit will enter pairing status. 4. The unit voice promp will say, “Pairing.” 5. The blue Bluetooth® LED Indicator light will begin to ash. 6 Master Volume Knob: • Incress overall volume in playback mode : • Defualt volme level is 10. • Rotate master volume knob clockwise. The power LED Indicator blinks when the max level of 32 is reached. •Decrese overall volume in playback mode: • Rotate master volume knob counter-clockwise. The power LED Indicator blinks when the minimum volume level of 0 (mute) is reached. Microphone Control: • XLR & ¼" Ports (Mic 1 and Mic 2): • Except XLR and ¼" microphones/instrument inputs • LED display will show the mic icon when a microphone is plugged-in. • Gain Knob (Mic 1 and Mic 2): • Rotate the gain knob clockwise to incresse or counter-clockwise to decrease the level on each channel. • Echo Eect Knob: • Rotate the echo knob clockwise to incresse or counter-clockwise to decrease the level on each channel. REPEAT Button: • This function is only available though the USB mode. Short press the REPEAT button to select one of three status settings: 1. Repeat ALL (tracks). “ALL” will be showen on the LED display. 2. Repeat ONE (track). “ONE” will be showen on the LED display. 3. Repeat OFF. “OFF” will be showen on the LED display. Previous & Next (arrow) Buttons: • FM radio source controls: • LED display FM indicator icon will light up in FM mode. • Short press the previous or next button to adjust the FM radio frequency shown on LED display. • Long press the previous or next button to search for radio stations. •Bluetooth® source controls: • LED display BT indicator icon will light up in Bluetooth® mode. • The pr…

Text truncated - open the document above for the full version.

Acoust Max International Corporation Room 501,Lingyun Building ,HongLang North 2 Road,ShenZhen,China Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01‐Mar‐2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BAA5‐MNX6 Acoust MaxInternational Corporation certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Acoust MaxInternational Corporation Acoust Max International Corporation Room 501,Lingyun Building ,HongLang North 2 Road,ShenZhen,China Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01‐Mar‐2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BAA5‐MNX6 Acoust MaxInternational Corporation certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Acoust MaxInternational Corporation

Model difference letter 2023.03.20 Dear MET Reviewer, This is a new Application from AcoustMax International Corporation Model No.: MNX6,MNX6 PLUS,MNX6+,MNX6-2,MNPAX-600,MNPAX-650, MNPAX-700,MNPAX-600-C,MNPAX-650-C,MNPAX-700-C,MNPAX-600LED, MNPAX-650LED,MNPAX-700LED,MNPAX-600LED-C,MNPAX-650LED-C, MNPAX-700LED-C Use MNX6 for all tests. Only models are different. Thank you for your cooperation! Yours sincerely, Signatory: Name: Hongguang Lu Position: Manager Company Name: AcoustMax International Corporation Address: Room 501,Lingyun Building ,HongLang North 2 Road, Baoan District,ShenZhen,GuangDong,518101,China Tel / Fax 86-13680267386 / 86-755-86970667 E-Mail: [email protected]

Attesta tion Statements 0 2/22/2023 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for FCC ID：2BAA5‐MNX6 AcoustMax International Corporation , the undersigned, hereby authorize E&S International Enterprises, Inc. to act as our designated U.S. agent for service of process, AcoustMax International Corporation accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission‐related proceeding involving the equipment. E&S International Enterprises, Inc. accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission‐related proceeding involving the equipment. Applicant Information： Company name: AcoustMax International Corporation Contact Name:Hongguang Lu Address: R oom 501,Lingyun Building ,HongLang North 2 Road, ShenZhen, China Telephone No: 86-13680267386 Email: [email protected] U.S. Agent Information: Company Name: E&S International Enterprises, Inc. Address: 7801 Hayvenhurst Ave.Van Nuys, Ca. 91406 Contact Name: Ting Liu FRN:0030411623 Grandee code: 2AYPE Telephone No: （818）887-0700 2224 Email: [email protected]

AcoustMax International Corporation Agent Authorization Letter 2023-03-20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen Most Technology Service Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Hongguang Lu Position: Manager Company Name: AcoustMax International Corporation Address: Room 501,Lingyun Building ,HongLang North 2 Road, Baoan District,ShenZhen,GuangDong,518101,China Tel / Fax 86-13680267386 / 86-755-86970667 E-Mail: [email protected]

AcoustMax International Corporation Long Term Confidentiality Request Letter 2023-03-20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR (FCC ID: 2BAA5-MNX6) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - e.g. Block diagram - e.g. SCH - e.g. Operational Description required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Name: Hongguang Lu Position: Manager Company Name: AcoustMax International Corporation Address: Room 501,Lingyun Building ,HongLang North 2 Road, Baoan District,ShenZhen,GuangDong,518101,China Tel / Fax 86-13680267386 / 86-755-86970667 E-Mail: [email protected]

Model No.: MNX6 FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE Model No.: MNX6 LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE Model No.: MNX6 TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE Model No.: MNX6 OVERALL OF SAMPLE

Model No.: MNX6 Page 1 of 3 INTERNAL PHOTO OF SAMPLE INTERNAL PHOTO OF SAMPLE PCB Model No.: MNX6 Page 2 of 3 INTERNAL PHOTO OF SAMPLE PCB INTERNAL PHOTO OF SAMPLE PCB Page 3 of 3 Model No.: MNX6 INTERNAL PHOTO OF SAMPLE PCB INTERNAL PHOTO OF SAMPLE PCB BLE ANT Location EDR ANT Location Page 4 of 3 Model No.: MNX6 INTERNAL PHOTO OF SAMPLE PCB

Shenzhen Most Technology Service Co., Ltd. No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China. RF Exposure Evaluation Rep Report Reference No......................: MTEB23020129-H FCC ID..............................................: 2BAA5-MNX6 Compiled by ( position+printed name+signature)..: File administrators Alisa Luo Supervised by ( position+printed name+signature)..: Test Engineer Sunny Deng Approved by ( position+printed name+signature)..: Manager Yvette Zhou Date of issue.....................................: February 28, 2023 Ort Representative Laboratory Name .: Shenzhen Most Technology Service Co., Ltd. Address ............................................: No.5, 2nd Langshan Road, North District, Hi‐tech Industrial Park, Nanshan, Shenzhen, Guangdong, China. Applicant’s name............................: AcoustMax International Corporation Address ............................................: Room 501,Lingyun Building ,HongLang North 2 Road, Baoan District, ShenZhen, China Test specification/ Standard ...............: 47 CFR Part 1.1307 47 CFR Part 2.1093 TRF Originator ..................................: Shenzhen Most Technology Service Co., Ltd. Shenzhen Most Technology Service Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Most Technology Service Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Most Technology Service Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: X6 Trade Mark .......................................: Monster Manufacturer ....................................: AcoustMax International Corporation Model/Type reference.......................: MNX6 Listed Models ..................................: MNX6 PLUS,MNX6+,MNX6-2,MNPAX-600,MNPAX- 650,MNPAX- 700,MNPAX-600-C,MNPAX-650-C,MNPAX-700-C,MNPAX- 600LED,MNPAX-650LED,MNPAX-700LED,MNPAX-600LED-C, MNPAX-650LED-C,MNPAX-700LED-C Modulation Type ...............................: GFSK, π/4DQPSK, 8DPSK Operation Frequency........................: From 2402MHz to 2480MHz Hardware Version.............................. V01 Software Version .............................. .: V1.0 Rating ...............................................: AC 100‐240V,50/60Hz,200W Result................................................: PASS Report No.: MTEB23020129-H Page 2 of 7 T E S T R E P O R T Equipment under Test : X6 Model /Type : MNX6 Listed Models : MNX6 PLUS,MNX6+,MNX6‐2,MNPAX‐600,MNPAX‐650, MNPAX‐700,MNPAX‐600‐C,MNPAX‐650‐C,MNPAX‐700‐C,MNPAX‐ 600LED,MNPAX‐650LED,MNPAX‐700LED,MNPAX‐600LED‐C, MNPAX‐650LED‐C,MNPAX‐700LED‐C Remark Only models are different. Applicant : AcoustMax International Corporation Address : Room 501,Lingyun Building ,HongLang North 2 Road, Baoan District, ShenZhen, China Manufacturer : AcoustMax International Corporation Address : Room 501,Lingyun Building ,HongLang North 2 Road, Baoan District, ShenZhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: MTEB23020129-H Page 3 of 7 1. Revision History Revision Issue Date Revisions Revised By 00 2023.02.28 Initial Issue Alisa Luo Report No.: MTEB23020129-H Page 4 of 7 2. SAR Evaluation RF Exposure Compliance Requirement Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. Limits According to FCC Part1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in part1.1307(b) F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Report No.: MTEB23020129-H Page 5 of 7 EUT RF Exposure BT classic GFSK Test channel Peak Output Power (dBm) Tune up tolerance (dBm) Maximum tune-up Power (dBm) Lowest(2402MHz) 1.223 1.223±1 2.223 Middle(2441MHz) 0.858 0.858±1 1.858 Highest(2480MHz) 0.598 0.598±1 1.598 π/4DQPSK Test channel Peak Output Power (dBm) Tune up tolerance (dBm) Maximum tune-up Power (dBm) Lowest(2402MHz) 1.025 1.025±1 2.025 Middle(2441MHz) 0.895 0.895±1 1.895 Highest(2480MHz) 1.000 1.000±1 2.000 8DPSK Test channel Peak Output Power (dBm) Tune up tolerance (dBm) Maximum tune-up Power (dBm) Lowest(2402MHz) 1.023 1.023±1 2.023 Middle(2441MHz) 0.747 0.747±1 1.747 Highest(2480MHz) 1.569 1.569±1 2.569 Worst case: GFSK Channel Maximum Peak Conducted Output Power (dBm) Maximum Peak Conducted Output Power (MW) Antenna Gain (dBi) Power Density at R = 20 cm (mW/cm2) Limi t Resul t Highest(2441 MHz) 2.569 1.80 0 0.0003 1.0 Pass Note: 1) Refer to report MTEB23020129‐R2 for EUT test Max Conducted average Output Power value. Note: 2) Pd = (Pout*G)/(4* Pi * R2)=(1.80*1.0)/(4*3.1416*202)=0.0003 Note: 3 )EUT's Bluetooth module is more than 20cm away from the human body. Report No.: MTEB23020129-H Page 6 of 7 BLE GFSK Test channel Peak Output Power (dBm) Tune up tol…

Text truncated - open the document above for the full version.

Antenna Specification manufacturer：AcoustMax International Corporation Address：Room 501,Lingyun Building ,HongLang North 2 Road, Baoan District, ShenZhen, China BT Chip:BP1064L2 PART I 3D Radiation Pattern 2402MHz 2440MHz 2480MHz Frequency Range(MHz) 2402 2440 2480 Gain X（dBi） -0.5 -0.4 -0.12 Gain Y（dBi） -0.32 -0.3 -0.24 Gain Z（dBi） -0.41 0.0 -0.38 Part II Dimensions:

Shenzhen Most Technology Service Co., Ltd. No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China. TEST REPORT FCC Rules Part 15.247 Report Reference No. ..................... : FCC ID.. .......................................... : MTEB23020129-R1 2BAA5-MNX6 Compiled by ( position+printed name+signature) .. : File administrators Alisa Luo Supervised by ( position+printed name+signature) .. : Test Engineer Sunny Deng Approved by ( position+printed name+signature) .. : Manager Yvette Zhou Date of issue ..................................... : February 28, 2023 Representative Laboratory Name .: Shenzhen Most Technology Service Co., Ltd. Address ............................................ : No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China. Applicant’s name ............................ : AcoustMax International Corporation Address ............................................ : Room 501,Lingyun Building ,HongLang North 2 Road, Baoan District, ShenZhen, China Test specification/ Standard ..........: FCC Rules Part 15.247 TRF Originator .................................. : Shenzhen Most Technology Service Co., Ltd. Shenzhen Most Technology Service Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Most Technology Service Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Most Technology Service Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : X6 Trade Mark ....................................... : Monster Manufacturer .................................... : AcoustMax International Corporation Model/Type reference....................... : MNX6 Listed Models .................................. : MNX6 PLUS,MNX6+,MNX6-2,MNPAX-600,MNPAX-650,MNPAX- 700,MNPAX-600-C,MNPAX-650-C,MNPAX-700-C,MNPAX- 600LED,MNPAX-650LED,MNPAX-700LED,MNPAX-600LED-C, MNPAX-650LED-C,MNPAX-700LED-C Modulation Type ............................... : GFSK Operation Frequency ........................ : From 2402MHz to 2480MHz Hardware Version .............................. V01 Software Version ............................... V1.0 Rating ............................................... : AC 100-240V,50/60Hz,200W Result................................................ : PASS Report No.: MTEB23020129-R1 Page 2 of 34 T E S T R E P O R T Equipment under Test : X6 Model /Type : MNX6 Listed Models : MNX6 PLUS,MNX6+,MNX6-2,MNPAX-600,MNPAX-650, MNPAX-700,MNPAX-600-C,MNPAX-650-C,MNPAX-700- C,MNPAX-600LED,MNPAX-650LED,MNPAX-700LED, MNPAX-600LED-C,MNPAX-650LED-C,MNPAX-700LED-C Remark Only models are different. Applicant : AcoustMax International Corporation Address : Room 501,Lingyun Building ,HongLang North 2 Road, Baoan District, ShenZhen, China Manufacturer : AcoustMax International Corporation Address : Room 501,Lingyun Building ,HongLang North 2 Road, Baoan District, ShenZhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: MTEB23020129-R1 Page 3 of 34 Contents 1. REVISION HISTORY ................................................................ 4 2. TEST STANDARDS .................................................................. 5 3. SUMMARY ............................................................................. 6 3.1. General Remarks 6 3.2. Product Description 6 3.3. Equipment Under Test 6 3.4. Short description of the Equipment under Test (EUT) 6 3.5. EUT operation mode 7 3.6. Block Diagram of Test Setup 7 3.7. Test Item (Equipment Under Test) Description* 7 3.8. Auxiliary Equipment (AE) Description 7 3.9 Antenna Information* 8 3.10. EUT configuration 8 3.11. Modifications 8 4. TEST ENVIRONMENT ............................................................... 9 4.1. Address of the test laboratory 9 4.2. Environmental conditions 9 4.3. Test Description 10 4.4. Statement of the measurement uncertainty 10 4.5. Equipments Used during the Test 11 5. TEST CONDITIONS AND RESULTS ............................................ 12 5.1. AC Power Conducted Emission ................................................................................... 12 5.2. Radiated Emission ........................................................................................................ 15 5.3. Maximum Peak Output Power ...................................................................................... 22 5.4. Power Spectral Density ................................................................................................ 23 5.5. 6dB Bandwidth ............................................................................................................. 25 5.6. Band Edge Compliance of RF Emission ...................................................................... 27 5.7. Spurious RF Conducted Emission ............................................................................... 29 5.8. Antenna Requirement ................................................................................................... 32 6. TEST SETUP PHOTOS OF THE EUT .......................................... 33 7. EXTERNAL AND INTERNAL PHOTOS OF THE EUT ....................... 34 Report No.: MTEB23020129-R1 Page 4 of 34 1. Revision History Revision Issue Date Revisions Revised By 00 2023.02.28 Initial Issue Alisa Luo Report No.: MTEB23020129-R1 Page 5 of 34 2. TEST STANDARDS The tests were performed according to following standards: The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-…

Text truncated - open the document above for the full version.

Model No.: MNX6 RE TEST SETUP Model No.: MNX6 CE TEST SETUP