2BABH-LF-IR02-315Wireless Remote Control

Manual 1. Type winch remote control 2. Brand :Jinmiao (JIMEO) 3. Model JM203112 4. Working voltage DC12V. Another 24V / 48V (optional) 5. Operating frequency 434 MHZ / 315 MHZ 6. Total load power 120W 7. Remote distance 0-30 m 8. Operating temperature-40-80 (°C) 9. Scope of application 2000 LB-20000LB ATV, Marine winch, electric gourd 10. Operating current: 10 A 11. 0-30 m operation distance 12. Rolling code. Additional learning code, fixed code can also be customized 13. Color: optional 14. Receiver 4 core wire, respectively: black (GND) red (VCC) yellow (output) white (output) 15. The code way: receiver on the power, immediately at the same time long press (5 seconds) transmitter IN and OUT, hear the receiver relay tick a response, namely the code success. Note: This process must be completed within one minute after the receiver is powered on. After the time, the program will close the pair code. At this time, the receiver is powered off again, and then the power on can activate the pair code program. FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Turn 5, Inc. 600 Cedar Hollow Road Paoli Pennsylvania United States The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-3-6 U.S. Agent Designation Turn 5, Inc. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID:2BABH-LF-IR02-315): Name and company of U.S. agent: Physical U.S. address of agent: FRN of U.S. agent: Email address of U.S. agent: Turn 5, Inc. 600 Cedar Hollow Road Paoli Pennsylvania United States 0033422692 [email protected] Turn 5, Inc. acknowledges their obligation to accept service of process on behalf of Turn 5, Inc. . Turn 5, Inc. accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature Shawn Walinsky PM Turn 5, Inc. Signature Shawn Walinsky PM Turn 5, Inc. 48_[model] US_Agent_2.911(d)(7) - U, V03

Sincerely, Name/Title： Shawn Walinsky/PM Company: Turn 5, Inc. Address: 600 Cedar Hollow Road Paoli Pennsylvania United States Phone: (610) 240-4645 Fax: N/A E-Mail: [email protected]

FCC ID: 2BABH-LF-IR02-315 External Photos of the EUT Photo 1 Photo 2 Photo 3 FCC ID: 2BABH-LF-IR02-315 Photo 4 Photo 5 Photo 6 FCC ID: 2BABH-LF-IR02-315 Photo 7

Label and Location Size: L: 1.0cm*W: 0.5cm Label and Location FCC ID : 2BABH-LF-IR02-315

FCC ID: 2BABH-LF-IR02-315 Internal Photos of the EUT Photo 1 Photo 2 Photo 3 FCC ID: 2BABH-LF-IR02-315 Photo 4 Photo 5 Photo 6 FCC ID: 2BABH-LF-IR02-315 Photo 7 Photo 8 Photo 9 PCB antenna FCC ID: 2BABH-LF-IR02-315 Photo 10

1. Antenna Description: Antenna type PCB Antenna Model LF-IR02-315 Frequency range 315MHz Manufacturer Ningbo Lift Winch Manufacture Co., Ltd Gain 0.00 dBi 2. Antenna Photo: Length:83.84mm diameter:2.17mm

FCC ID: 2BABH-LF-IR02-315 Test Setup Photos of the EUT