2BADZSYNCPKT2025Sensor Controller

SPMSBDCE06AUXL7.26.01 Last Updated: January 30, 2026 18:00 PM 1 11325 Cash Road, Suite #100, Houston, T exas 77477 713-389-5680 | [email protected] | www.slgus.com ©2026 SLG Lighting, Inc. All Rights Reserved. sync TM + Bluetooth Sensor SP-MSB-DCE-06-AUX-L7 Non-UV Resistant White Finish 3.5mm PIN BLUETOOTH SENSOR & CONTROLLER Description: Our low-voltage Bluetooth wireless PIR/Daylight sensor with an integrated 3.5mm jack is designed for simple plug-in installation. This sensor provides 360° coverage at heights of 40Ft with an IP65 rating, 52’ radius detection range from 40Ft height. Download our SLG Sync plus app on IOS/android for easy commissioning, convient controls, and a total lighting network experience. Features: • Network LLLC (LLLC) enabled with wireless bluetooth technology. • Easy to install in the field with pre-installed 3.5 mm PIN receptacle for SLG Lighting controls ready fixtures or with an SLG Lighting PIN adapter. • User friendly commissioning with SLG Sync+ App (Available in IOS and Android). • Local Bluetooth Network - no gateway needed. • Occupancy and Daylight Harvesting. • Multi-level dimming: Manual ON/OFF Automatic ON/OFF, and Automatic Partial ON/OFF control capability with the SLG Sync App. • Create scenes for more customized dimming scenarios via SLG Sync App. • Time clock scheduling for individual lights, groups, or scenes via SLG Sync App. • High & Low-Trim/Tuning sets the maximum light level based on customer requirements in each space. • 5 Year Warranty. Ordering Information: Sensor/Controller Pr oduct NumberDescription SP-MSB-DCE-06-AUX-L7 Commissioning: SLG Sync mobile App is the easiest way to pair devices, create groups, set scenes, set schedules, dimming, color tuning, and adjust high trim based on needs. Visit www.slgus.com/slgsync for How-to-Videos and a comprehensive commissioning guide. App Download: • Check www.slgus.com/slg-sync for SLG Ligting fixture compatibility. SPMSBDCE06AUXL7.26.01 Last Updated: January 30, 2026 18:00 PM 2 11325 Cash Road, Suite #100, Houston, T exas 77477 713-389-5680 | [email protected] | www.slgus.com ©2026 SLG Lighting, Inc. All Rights Reserved. sync TM + Wiring Dimensions Coverage Bluetooth Transmit 200 ft. Max Radio Frequency 2.4 GHz +- 75 MHz Mounting Height 40 ft. Max 0-10V Signal Output 20mA Detection Range 52 ft Max Detection Angle 360° Operating Temperature -25°C to 55°C (-13°F to 131°F) Warranty 5 Year warranty Input Voltage 12-24VDC IP Rating IP65 Unit: in The detection area for movement can be roughly divided into two parts: 2.30 1.70 M20 1.45 1.16 0.56 0.30 1.87 0.14 0 0m 4m2m2m4m8m 4m 8m 12m 8m SPMSBDCE06AUXL7.26.01 Last Updated: January 30, 2026 18:00 PM 3 11325 Cash Road, Suite #100, Houston, Texas 77477 713-389-5680 | [email protected] | www.slgus.com ©2026 SLG Lighting, Inc. All Rights Reserved. sync TM + Dimmer Lu minaries Wall Switch SLG Sync+® App Application Sensor Installation Precautions Avoid areas with frequent temperature changes: Keep away from air conditioners, fans, refrigerators, ovens, and other objects that cause rapid temperature changes. The detection effectiveness of PIR motion sensors is closelyrelated to temperature fluctuations, and vents or heat sources can lead to false alarms. Avoid areas with significant air flow. Avoid installing opposite large, constantly moving objects: Large objects with significant motion can cause suddenchanges in airflow within the detection area, leading to false alarms. Outdoor PIR motion sensors should not beinstalled opposite large trees or tall bushes. Avoid areas with screens, furniture, large potted plants, or other obstacles within the detection range. Avoid areas exposed to direct sunlight. Avoid facing glass doors and windows directly: 1 ) Do not face glass doors and windows directly to avoid interferencefrom strong light. 2) Avoid complex environments outside doors and windows, such as direct sunlight, crowds, and moving vehicles. Federal Communications Commission (FCC) Statement.This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1)This device may not cause harmful interference, and (2)this device must acceptany interference received, including interference that may cause undesired operation.Note: This equipment has beentested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide Reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one ormore of·1the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by may void the FCC authorization to operate this device.Note: The manufacturer is not responsible for any radio or TV interference caused byunauthorized modifications to this equipment. Such modifications could void the user’s authorityto operate the equipment. RFexposurestatement: This device complies with FCC RF radiation exposure limits set forth for anuncontrolled environment.The device is installed and operated without restriction.

The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. 48_[model] US_Agent_2.911(d)(7) - U, V05 SLG Lighting Inc. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 06-26-2026 Name and company of U.S. agent: SLG Lighting Inc. Physical U.S. address of agent: 11325 Cash Rd. Suite 100 Stafford Texas United States 77477 FRN of U.S. agent: 0033460346 Email address of U.S. agent: [email protected] Telephone of U.S.agent: U.S. Agent Designation [SLG Lighting Inc.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID:2BADZSYNCPKT2025) 713 389 5680 ext. 115 SLG Lighting Inc. acknowledges their obligation to accept service of process on behalf of SLG Lighting Inc.. SLG Lighting Inc. with the FRN [0033460346] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Signature Royce Banuelos Royce Banuelos Director of Communication Director of Communication SLG Lighting Inc. SLG Lighting Inc.

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: SLG Lighting Inc. Grantee code: 2BSEJ FCC ID: 2BSEJ–Y28C FRN: 0037543626 Contact Name: Wei Yuxiang Address: 11325 Cash Rd. Suite 100 Stafford Texas United States 77477 Telephone No: 7133895680 Fax No: 8329475208 Email: [email protected] i. ii. [SLG Lighting Inc.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. [SLG Lighting Inc.] certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Date: 2026/06/2 [SLG Lighting Inc.] certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . 6 Applicant’s Name: Royce Banuelos Title: Director of Communication Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

SLG Lighting Inc. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Device Sensor Controller Company name SLG Lighting Inc. Grantee code 2BADZ FCC ID 2BADZSYNCPKT2025 FRN 0033460346 Contact name Royce Banuelos Address 11325 Cash Rd. Suite 100 Stafford Texas United States 77477 Telephone number 713 389 5680 ext. 115 E-mail [email protected] Chipset/module information N54L15 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 3 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: 4 # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies signature: Name: Royce Banuelos Date: 2026-06-26 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

SLG Lighting Inc. Product Similarity Declaration Product name: Sensor Controller Model name: SP-MSB-DCE-06-AUX-L7, SP-MSB-DCE-09-Z10-L7-W, SP-MSB-DCE-08-AUX, SP-MSB-DCE-08-TL25, SP-ZCB-AC-04, SP-WCB-SP-025-2B, SP-WCB-SP-025-4B, SP-MSB-DCI-08, SP-MSE-DCI-07, SP-MSB-DCI-07, SP-FCB-DCE-02, SP-FCB-DCE-02-Z10-W, SP-FCB-DCE-03-AUX, SP-FCB-DCE-03-TL25, SP-FCB-DCI-03, SP-MSB-DCE-XX-XXX-XX-X, SP-WCB-SP-XXX-XX, SP-FCB-DCE-XX-XXX- XXX “X” can be any word or numbers. FCC ID/ISED: 2BADZSYNCPKT2025 We (SLG Lighting Inc.) hereby state that all the models are electrical identical including the same software parameter and hardware design ( circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB), same mechanical structure and design, the only difference is the model name and appearance color. Signature: Name: Royce Banuelos Title: Director of Communication Place, date 2026.06.26

TCBCALLpágina1 FileFCCID:2BADZSYNCPKT2025 PleaseuploadanexhibitthatexplainshowdoestheTCBverifythenewagentinformation: 1-IstheaddressoftheagentavalidphysicalUSmailingaddress(notaUSpostofficebox,notavirtualmailbox,notP.O.Boxes,notavacantlot,notapublicbuilding, etc.) ○Wehavecheckediftheaddressexistsinarealandpotentialbuilding(Googlemaps)+officialUSregister,afterthisverificationandtheevidencebelowwecan guaranteethefollowing: notaUSpostofficebox notavirtualmailbox notP.O.Boxes notavacantlot notapublicbuilding(note) ►WecheckedtheFCCFRNSearchbasedontheinformationprovidedbythe grantee. TheapplicantisadomesticAmericanenterprise.Theychoose themselvesastheircontactpersonanddonotneedtoseekother agents Ingoogle: TCBCALLpágina2 https://comptroller.texas.gov/taxes/franchise/account-status/search/32093925017 TCBCALLpágina3 ►CONCLUSIONbyTCB:TheASOPdefinedandprovidedbygranteeisVALIDandconfirmed.Thereforetheexhibit"C5266091_X23_Ed1_US_Agent_Letter" includedinthefileisok. 2-IstheagentphysicallylocatedatthatvalidUSaddresssuchthattheagentcanbelegallyservedatthataddress? Yes,checkabove 3-Hasthelistedagentclearlyagreedinwritingtoserveastheagentforthegranteeatthataddress? Yes,itisincludedintheexhibit"C5266091_X23_Ed1_US_Agent_Letter" >

C5266091_X10_Ed.2 1/1 <SLG Lighting Inc.> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: Jun.26, 2026 Subject: Request for Confidentiality FCC ID: 2BADZSYNCPKT2025 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Royce Banuelos Title: Director of Communication

C5266091_X8_Ed.1 1/1 Letter of Authorization <SLG Lighting Inc.> Company: SLG Lighting Inc. Address: 11325 Cash Rd. Suite 100 Stafford Texas United States 77477 Product Name: Wei Yuxiang Model Number: SP-MSB-DCE-06-AUX-L7, SP-MSB-DCE-09-Z10-L7-W, SP-MSB-DCE-08-AUX, SP-MSB-DCE-08-TL25, SP-ZCB-AC-04, SP-WCB-SP-025-2B, SP-WCB-SP-025-4B, SP-MSB-DCI-08, SP-MSE-DCI-07, SP-MSB-DCI-07, SP-FCB-DCE-02, SP-FCB-DCE-02-Z10-W, SP-FCB-DCE-03-AUX, SP-FCB-DCE-03-TL25, SP-FCB-DCI-03, SP-MSB-DCE-XX-XXX-XX-X, SP-WCB-SP-XXX-XX, SP- FCB-DCE-XX-XXX-XXX “X” can be any word or numbers. FCC Identifier: 2BADZSYNCPKT2025 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Royce Banuelos Date: Jun, 26, 2026 Title: Director of Communication Signature of applicant:

FCC ID: 2BADZSYNCPKT2025 Page 1 of 3 Report No. CTL2604018061-WF External Photos of the EUT FCC ID: 2BADZSYNCPKT2025 Page 2 of 3 Report No. CTL2604018061-WF FCC ID: 2BADZSYNCPKT2025 Page 3 of 3 Report No. CTL2604018061-WF

5 2 0 2 T K P C N Y S Z D A B 2 : D I C C F E533134 LED CONTROLLER Install Guide 04/2026 Made in China V01 Model: 1、日期格式：月/年 2、按订单修改日期 C ° 5 5 + ~ C ° 5 2 - : a T PIR Sensor

FCC ID: 2BADZSYNCPKT2025 Page 1 of 5 Report No. CTL2604018061-WF Internal Photos of the EUT FCC ID: 2BADZSYNCPKT2025 Page 2 of 5 Report No. CTL2604018061-WF FCC ID: 2BADZSYNCPKT2025 Page 3 of 5 Report No. CTL2604018061-WF FCC ID: 2BADZSYNCPKT2025 Page 4 of 5 Report No. CTL2604018061-WF FCC ID: 2BADZSYNCPKT2025 Page 5 of 5 Report No. CTL2604018061-WF

Shenzhen CTL Testing Technology Co., Ltd. Tel:+86-755-89486194 E-Mail:[email protected] RF Exposure evaluation Report Reference No. ................ : CTL2604018061-WFH Compiled by: (printed name+signature) Andy Su Reviewed by: (printed name+signature) Happy Guo Approved by: (printed name+signature) Ivan Xie Product Name ............................. : Sensor Controller Model/Type reference ................ : SP-MSB-DCE-06-AUX-L7 List Model(s) ............................... : Please look at page 2. Trade Mark .................................. : N/A FCC ID ......................................... : 2BADZSYNCPKT2025 Applicant’s name ....................... : SLG Lighting Inc. Address of applicant .................. : 11325 Cash Rd. Suite 100 Stafford Texas United States 77477 Test specification ....................... : Standard ...................................... : 47CFR §1.1310 47CFR §2.1093 KDB447498 D01 General RF Exposure Guidance v06 TRF Originator ............................. : Shenzhen CTL Testing Technology Co., Ltd. Master TRF .................................. : Dated 2017-01 Date of receipt of test item ........ : Apr 03, 2026 Date of Test ............................... : Apr 03, 2026- Apr 16, 2026 Date of Issue .............................. : Apr 16, 2026 Result .......................................... : Pass Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. V1.0 Page 2 of 11 Report No.: CTL2602062044-WFH TEST REPORT Test Report No. : CTL2604018061-WFH Apr 16, 2026 Date of issue Product Name : Sensor Controller Sample No : CTL260401806001, CTL260401806002, CTL260401806003 Model /Type : SP-MSB-DCE-06-AUX-L7 Listed Models : SP-MSB-DCE-09-Z10-L7-W, SP-MSB-DCE-08-AUX, SP-MSB-DCE-08-TL25, SP-ZCB-AC-04, SP-WCB-SP-025-2B, SP-WCB-SP-025-4B, SP-MSB-DCI-08, SP-MSE-DCI-07, SP-MSB-DCI-07, SP-FCB-DCE-02, SP-FCB-DCE-02-Z10-W, SP-FCB-DCE-03-AUX, SP-FCB-DCE-03-TL25, SP-FCB-DCI-03, SP-MSB-DCE-XX-XXX-XX-X, SP-WCB-SP-XXX-XX, SP-FCB-DCE-XX-XXX-XXX “X” can be any word or num bers. Applicant : SLG Lighting Inc. Address : 11325 Cash Rd. Suite 100 Stafford Texas United States 77477 Manufacturer : SLG Lighting Inc. Address : 11325 Cash Rd. Suite 100 Stafford Texas United States 77477 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the issuing testing laboratory. V1.0 Page 3 of 11 Report No.: CTL2602062044-WFH ** Modified History ** Revision Description Issued Data Report No. Remark Version 1.0 Initial Test Report Release Apr 16, 2026 CTL2604018061-WFH Tracy Qi V1.0 Page 4 of 11 Report No.: CTL2602062044-WFH Contents 1 GENERAL INFORMATION .......................................................................................................................................... 5 1.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 5 1.2 PRODUCT DESCRIPTION ................................................................................................................................................. 5 1.3 TEST FACILITY .............................................................................................................................................................. 6 1.4 STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................................... 6 2 METHOD OF MEASUREMENT ................................................................................................................................... 8 2.1 APPLICABLE STANDARD.................................................................................................................................................. 8 2.2 EVALUATION METHOD AND LIMIT .................................................................................................................................... 8 3 CONDUCTED POWER RESULTS .................................................................................................................................. 9 4 MANUFACTURING TOLERANCE .............................................................................................................................. 10 5 EVALUATION RESULTS ............................................................................................................................................. 11 5.1 STANDALONE EVALUATION ........................................................................................................................................... 11 6 CONCLUSION .......................................................................................................................................................... 11 V1.0 Page 5 of 11 Report No.: CTL2602062044-WFH 1 GENERAL INFORMATION 1.1 Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 18-28°C Relative Humidity: 30-60% Air Pressure: 965-1030hPa 1.2 Product Description Product Name: Sensor Controller Model/Type reference: SP-MSB-DCE-06-AUX-L7 Power supply: DC24V Test Voltage DC24V Bluetooth Low Energy Supported type: Bluetooth Low Energy Modulation: GFSK Operation frequency: 2402MHz~2480MHz Channel number: 40 Channel separation: 2MHz Antenna type: PCB Antenna Antenna gain: 1.23 dBi provided by Applicant Manufacturer Note 1: For more details, refer to the user’s manual of the EUT. Note 2: Antenna gain and cable los…

Text truncated - open the document above for the full version.

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 E-mail: [email protected] TEST REPORT FCC PART 15.247 Report Reference No. ................ : CTL2604018061-WF Compiled by: (printed name+signature) Andy Su Reviewed by: (printed name+signature) Happy Guo Approved by: (printed name+signature) Ivan Xie Product Name ............................. : Sensor Controller Model/Type reference ................ : SP-MSB-DCE-06-AUX-L7 List Model(s) ............................... : Please look at page 2. Trade Mark .................................. : N/A FCC ID ......................................... : 2BADZSYNCPKT2025 Applicant’s name ....................... : SLG Lighting Inc. Address of applicant .................. : 11325 Cash Rd. Suite 100 Stafford Texas United States 77477 Test specification ....................... : Standard ...................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400-2483.5 MHz and 5725-5850 MHz. TRF Originator ............................. : Shenzhen CTL Testing Technology Co., Ltd. Master TRF .................................. : Dated 2011-01 Date of receipt of test item ........ : Apr 03, 2026 Date of Test Date ........................ : Apr 03, 2026- Apr 16, 2026 Date of Issue .............................. : Apr 16, 2026 Result .......................................... : Pass Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. V1.0 Page 2 of 42 Report No. CTL2604018061-WF TEST REPORT Test Report No. : CTL2604018061-WF Apr 16, 2026 Date of issue Equipment under Test : Sensor Controller Sample No : CTL260401806001, CTL260401806002, CTL260401806003 Model /Type : SP-MSB-DCE-06-AUX-L7 Listed Models : SP-MSB-DCE-09-Z10-L7-W, SP-MSB-DCE-08-AUX, SP-MSB-DCE-08-TL25, SP-ZCB-AC-04, SP-WCB-SP-025-2B, SP-WCB-SP-025-4B, SP-MSB-DCI-08, SP-MSE-DCI-07, SP-MSB-DCI-07, SP-FCB-DCE-02, SP-FCB-DCE-02-Z10-W, SP-FCB-DCE-03-AUX, SP-FCB-DCE-03-TL25, SP-FCB-DCI-03, SP-MSB-DCE-XX-XXX-XX-X, SP-WCB-SP-XXX-XX, SP-FCB-DCE-XX-XXX-XXX “X” can be any word or numbers. Applicant : SLG Lighting Inc. Address : 11325 Cash Rd. Suite 100 Stafford Texas United States 77477 Manufacturer : SLG Lighting Inc. Address : 11325 Cash Rd. Suite 100 Stafford Texas United States 77477 Test result Pass * *In the configuration tested, the EUT complied with the standards specified page 5. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the issuing testing laboratory. V1.0 Page 3 of 42 Report No. CTL2604018061-WF ** Modified History ** Revisions Description Issued Data Report No. Remark Version 1.0 Initial Test Report Release Apr 16, 2026 CTL2604018061-WF Tracy Qi V1.0 Page 4 of 42 Report No. CTL2604018061-WF Table of Contents Page 1. SUMMARY ............................................................................................................................................................... 5 1.1. TEST STANDARDS ..................................................................................................................................................... 5 1.2. TEST DESCRIPTION ........................................................................................................................................................ 5 1.3. TEST FACILITY .............................................................................................................................................................. 6 1.4. STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................…

Text truncated - open the document above for the full version.