2BAHE-SCSS0008Sauna controller with Bluetooth connection

Infrared Sauna Operating instruction Infrared makes life more healthy Due to our continued product improvement, product illustrated on this instruction manual may vary slightly from the actual product. Contents Important safety guides2 ........................... Warning 1 ............................................. Structure of infrared sauna 3........................ Installation process 4................................. Installation precautions 5........................... Control panel operation 7 ........................... Control box 8 .......................................... Maintenance 9 ....................................... Trouble shooting 10 .................................... Warnin g 1 1The appliance is to be continuously attended 2The sauna room or cabin is to be inspected before setting the appliance to a standby mode for a delayed start. 3Cleaning with steam cleaners, high pressure cleaners and spraying water is not allowed. 4it is recommended that the infrared cabin should not be used within 24 h after UV radiation exposure from artificial sources or sun-bathing; 5individuals who may be at risk from hyperthermia, such as indi- viduals suffering from cardiovascular disease, should seek medical advice before use of infrared warming cabins; 6when persistent erythema (reddening of the skin lasting more than a day) and netlike colour changes persist after regular expo- sure to infrared radiation, exposure should not be repeated and medical advice should be sought to prevent development of erythema ab igne; 7if you are a person with compromised heat pain sensation or under the influence of alcohol or tranquilizers you should not use infrared warming cabins. 8a pilot lamp showing that the heater or infrared emitter is switched on is to be installed in the attendant's room. 9This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 10If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Important safety guides Please strictly follow safety precautions when using! 2 1. Children must be using the equipment under the care of an adult. For safety, do not play with it； 2. Do not insert objects such as fingers or sticks into the heating tube plate to prevent danger； 3. Never pour water to the equipment or the heating pipe (board)； 4. Do not use or store flammable gas or liquid such as hair spray, oil paint, gasoline, etc near the equipment to avoid fire； 5. Do not place items inside or on top of the sauna； 6. Do not touch the power control panel and any electrical components with wet hands to prevent electric shock； 7. It is forbidden to use the equipment during thunderstorms to prevent electric shock； 8. Do not tilt the equipment, do not use sharp objects to strike； 9. Shut down the equipment for half an hour after 4 hours continuous working； 10. Do not operate the equipment in a long-term high temperature environment； 11. Use with caution after drinking alcohol； 12. Those who have hemophilia or are prone to bleeding should avoid using it； 13. Please consult your doctor before using if you are in period of disease and taking medicine； 14. Do not use after intense exercise, wait until the body temperature returns to normal before using； 15. If you feel any discomfort, please stop using immediately； 16. Mind your head when get in and out of the equipment； 17. Do not sleep inside the equipment when it is working； 18. Do not use any bath products in the sauna； 19. To avoid burns, do not touch the heating element； 20. WARNING:Covering the heater or infrared emitter causes fire risk! 21. If you have any questions, please call the supplier. Structure of infrared sauna 3 Speaker Left board Control panel Hinge Handle 1 2 3 4 Control box Duster cover 5 Temperature sensor Top board Back board Heater frame 11 12 Right board 13 14 15 Door glass 10Ventilation 6 8 9 7 Front board Foot rest board Bench front board Bench Bottom board 16 17 18 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 15 17 18 19 Attention: 1The minimum distance between the top of an infrared emitter and the ceiling of the cabinis 100 mm; 2The minimum distance between the bottom of an infrared emitter and the floor of the cabin is 40 mm, unless this distance is determined by the construction of the intrared emitter; 3.The minimum horizontal distance between an infrared emitter and any com- bustible material of the cabin is 5 mm, unless these distances are determined by the construction of the infrared emitter; 4.The minimum distance between adjacent infrared emitters is 5 mm. Installation process Back boardLeft board BenchBench front board Bottom board Right board Top boardFront boardFoot rest board 4 * The structure may vary from different models.Due to our continued product improvement, product illustrated on this instruction manual may vary slightly from the actual product. Installation precautions Large plate assembly Suitable for processes 3 and 4 Installation method of the left and right side panels Suitable for process 8 Installation method of the front board 5 Installation precautions Electrical connection 12 Conection cableConnection plug 6 The product is connected to the main power supply through the cable. the brown core of the cable is connected to the live wire of the main power supply, the blue core is connected to the neutral wire of the main power supply, and the yellow green core is connected to the ground wire of the main power supply Control panel operation TIME VOLUMETRACKMUSIC TEMP 1 2 3 4 5 7 8 9 10 6 Display screen For temperate,time,FM. Power button Touch this key to turn on or turn off it. 1 2 Music b…

Text truncated - open the document above for the full version.

Appendix-CP-04A-Photos Page 3 of 9 2. Photographs –Constructional Details 2.1. EUT – External View Model CP-04A FCC ID: 2BAHE-SCSS0008 Appendix-CP-04A-Photos Page 4 of 9 Appendix-CP-04A-Photos Page 5 of 9

Appendix-CP-04A-Photos Page 6 of 9 2.2. EUT – Internal View Model CP-04A FCC ID: 2BAHE-SCSS0008 Appendix-CP-04A-Photos Page 7 of 9 Appendix-CP-04A-Photos Page 8 of 9 Ant. Appendix-CP-04A-Photos Page 9 o f 9

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 8 TEST REPORT Reference No. .................... : WTD23D12263997W002 FCC ID ................................ : 2BAHE-SCSS0008 Applicant ............................ : Spa World Corporation Address .............................. : 5701 NW 35th Ave, 33142, Miami, Florida, United States Manufacturer .................... : Spa World Corporation Address .............................. : 5701 NW 35th Ave, 33142, Miami, Florida, United States Product ............................... : Sauna controller with Bluetooth connection Model(s). ............................ : CP-04A Standards........................... : FCC 47CFR Part 2 Subpart J Section 2.1091 Date of Receipt sample .... : 2023-12-13 Date of Test ....................... : 2023-12-13 to 2024-02-02 Date of Issue ...................... : 2024-02-05 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Ford Wang / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTD23D12263997W002 Page 2 of 8 Waltek Testing Group Co., Ltd. http://www.w altek.com.cn 2. Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2.CONTENTS ............................................................................................................................................... 2 3.REVISION HISTORY ................................................................................................................................. 3 4.GENERAL INFORMATION ....................................................................................................................... 4 4.1. GENERAL DESCRIPTION OF E.U.T.................................................................................................... 4 4.2. DETAILS OF E.U.T. ......................................................................................................................... 4 4.3. TEST FACILITY ................................................................................................................................ 5 4.4. SUBCONTRACTED ........................................................................................................................... 5 4.5. ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................ 5 5.TEST SUMMARY ...................................................................................................................................... 6 6.RF EXPOSURE ......................................................................................................................................... 7 6.1. REQUIREMENTS .............................................................................................................................. 7 6.2. THE PROCEDURES / LIMIT ................................................................................................................ 7 6.3. MPE CALCULATION METHOD........................................................................................................... 8 6.4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ................................................................... 8 Reference No.: WTD23D12263997W002 Page 3 of 8 Waltek Testing Group Co., Ltd. http://www.w altek.com.cn 3. Revision History Test Report No. Date of Receipt Sample Date of Test Date of Issue Purpose Comment Approved WTD23D12263997W002 2023-12-13 2023-12-13 to 2024-02-02 2024-02-05 Original -Valid Reference No.: WTD23D12263997W002 Page 4 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4. General Information 4.1. General Description of E.U.T. Product: Sauna controller with Bluetooth connection Model(s): CP-04A BT Version: V5.0+BR+EDR+BLE Hardware Version: SWV1.0 Software Version: SWV1.0 4.2. Details of E.U.T. Operation Frequency: Bluetooth: 2402-2480MHz Max. RF output power: 3.96dBm Modulation Technology: GFSK, π/4DQPSK, 8DPSK Antenna installation: PCB printed antenna Antenna Gain: 2.499dBi Note: #: The antenna gain is provided by the applicant, and the applicant should be responsible for its authenticity, WALTEK lab has not verified the authenticity of its information. Ratings: DC 5V Reference No.: WTD23D12263997W002 Page 5 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4.3. Test Facility The test facility has a test site registered with the following organizations: ISED CAB identifier: CN0013. Test Firm Registration No.: 7760A. Waltek Testing Group Co., Ltd. Has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration number 7760A, October 15, 2016. FCC Designation No.: CN1201. Test Firm Registration No.: 523476. Waltek Testing Group Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration number 523476, September 10, 2019. 4.4. Subcontracted Whether parts of tests for the product have been subcontracted to other labs: Yes No If Yes, list the related test items and lab information: Test Lab: N/A Lab address: N/A Test items: N/A 4.5. Abnormalities from Standard Conditions None. Reference No.: WTD23D12263997W002 Page 6 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 5. Test Summary Test Items…

Text truncated - open the document above for the full version.

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 78 TEST REPORT Reference No. .................... : WTD23D12263997W001 FCC ID ................................ : 2BAHE-SCSS0008 Applicant ............................ : Spa World Corporation Address .............................. : 5701 NW 35th Ave, 33142, Miami, Florida, United States Manufacturer .................... : Spa World Corporation Address .............................. : 5701 NW 35th Ave, 33142, Miami, Florida, United States Product ............................... : Sauna controller with Bluetooth connection Model(s). ............................ : CP-04A Standards........................... : FCC 47CFR Part 15.247 Date of Receipt sample .... : 2023-12-13 Date of Test ....................... : 2023-12-13 to 2024-02-02 Date of Issue ...................... : 2024-02-05 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Ford Wang / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTD23D12263997W001 Page 2 of 78 Waltek Testing Group Co., Ltd. http://www.w altek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................... 2 3 REVISION HISTORY ................................................................................................................................. 4 4 GENERAL INFORMATION ....................................................................................................................... 5 4.1 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................... 5 4.2 DETAILS OF E.U.T. .............................................................................................................................. 5 4.3 CHANNEL LIST ..................................................................................................................................... 6 4.4 TEST MODE ........................................................................................................................................ 6 4.5 TEST FACILITY .................................................................................................................................... 7 5 TEST SUMMARY ...................................................................................................................................... 8 6 EQUIPMENT USED DURING TEST ......................................................................................................... 9 6.1 EQUIPMENTS LIST ............................................................................................................................... 9 6.2 MEASUREMENT UNCERTAINTY ............................................................................................................. 9 7 RADIATED SPURIOUS EMISSIONS ..................................................................................................... 10 7.1 EUT OPERATION ............................................................................................................................... 10 7.2 TEST SETUP ..................................................................................................................................... 11 7.3 SPECTRUM ANALYZER SETUP ............................................................................................................ 12 7.4 TEST PROCEDURE ............................................................................................................................. 13 7.5 CORRECTED AMPLITUDE & MARGIN CALCULATION .............................................................................. 13 7.6 SUMMARY OF TEST RESULTS ............................................................................................................. 14 8 CONDUCTED SPURIOUS EMISSIONS ................................................................................................. 38 8.1 TEST PROCEDURE ............................................................................................................................. 38 8.2 TEST RESULT .................................................................................................................................... 39 9 BAND EDGE MEASUREMENT .............................................................................................................. 48 9.1 TEST PROCEDURE ............................................................................................................................. 48 9.2 TEST RESULT .................................................................................................................................... 49 10 20 DB BANDWIDTH AND 99% BANDWIDTH MEASUREMENT ......................................................... 53 10.1 TEST PROCEDURE ........................................................................................................................ 53 10.2 TEST RESULT ............................................................................................................................... 53 11 MAXIMUM PEAK OUTPUT POWER ...................................................................................................... 60 11.1 TEST PROCEDURE ......................................................…

Text truncated - open the document above for the full version.

Antenna specifications SPECIFICATIONS Frequency（MHz）2400-2480 Peak Gain（dBi）2.499 Average Gain（dBi）＞-4 VSWR＜3.2 Impedance（Ω）50Ω Antenna TypePlannar Inverted F Antenna on board PolarizationLinear Z X Y Antenna physical and physical dimensions Antenna Passive S-Parameters： Standing wave ratio (VSWR), return loss (Return Loss) and Smith chart Antenna efficiency and gain Frequency（MHz）Gain（dBi）Effciency（%）AverageGain（dBi）Efficiency（dB） 24001.43359.329%-2.717-2.267 24100.92751.861%-3.416-2.852 24200.82952.112%-3.166-2.831 24300.88149.299%-3.258-3.072 24401.19250.672%-3.144-2.952 24501.68853.067%-2.735-2.752 24602.19459.423%-2.276-2.260 24702.11856.680%-2.438-2.466 24802.49961.727%-2.112-2.095 Average1.52954.908%-2.806-2.616 Peak2.49961.727%-2.112-2.095 Antenna 2440MHz 2D-Theta Pattern Antenna 2440MHz 2D-Phi Pattern Antenna 2440MHz 3D-Horizontal Pattern Antenna 2440MHz 3D-Vertical Pattern 2440MHz3D-TotalPattern

Appendix-CP-04A-Photos Page 1 of 9 1. Test Setup photos Model CP-04A FCC ID: 2BAHE-SCSS0008 1.1 Photograph – Radiated Emissions For 9kHz-30MHz Test Site 2# For 30MHz-1000MHz Test Site 2# Appendix-CP-04A-Photos Page 2 of 9 For Above 1GHz Test Site 1#