2BAIW-SLITEOne

User Manual 1 Contents Contents3 Slite Features4 Using the Slite6 Connecting to power6 Changing Brightness6 Changing Between Modes6 Color Mode7 White Mode7 Effects Mode7 Warnings8 Troubleshooting9 Detailed Specifications10 Regulatory11 FCC Declaration of Conformity11 2 Slite Features: 3 Slite Features: 1. USB-C input 2. Display 3. Brightness +/- buttons 4. Value +/- buttons 5. Function button 6. Power button 7. ¼” mounts (portrait and landscape) 8. Magnetic mounting plate 4 Using the Slite: Connecting to power Connect the Slite to either the supplied USB-C PD (power delivery) wall power supply or a suitable USB-C PD powerbank. IMPORTANT: Powerbank must be 65W or above, 20V and a power delivery (PD) unit. The Slite will power up and display the SLITE logo on the screen, and then default to “power off” mode. Press the power button to turn the light on. Changing Brightness At any time, you can use the Brightness +/- buttons to adjust the brightness of the Slite. Changing between Modes The Slite has three main modes: Mode (Short press ‘Function’ button to change) Sub-mode (Long press ‘Function’ button to change) 1.Color1.Hue 2.Saturation 2.White1.Color temperature 2.Green/magenta shift 3.Effects1.Broken Globe 5 2.Paparazzi 3.Television 4.Lightning 5.Police lights 6.Fireworks 7.Disco 8.Pulsing 9.Strobe 10.Fire Short press the Function button to cycle between these modes. Within each mode, there are sub-modes with parameters that can be adjusted: 1.Color: hue and saturation 2.White: color temperature and green/magenta shift 3.Effects: List of effects Long press the Function button to cycle between the sub-modes within each mode. In the case of the Effects mode, this will cycle between each of the available effects. Color Mode In Color Mode, the Slite will output a color that's a combination of Hue and Saturation. To adjust either the Hue or Saturation, select the parameter and press the Value +/- buttons. The white color temperature used for desaturation is based on the White Mode color temperature. To adjust this, go to White Mode and select the desired temperature, then return to Color Mode to select the output color. 6 White Mode In White Mode, the Slite will output a white light based on the selected color temperature. The output white color can be further adjusted by using the Green/Magenta Shift. To adjust either the Colour Temperature or Green/Magenta Shift, select the parameter and press the Value +/- buttons. Effects Mode In Effects Mode, the Slite will generate and output an effect. For many of the effects, the sequence of lights is randomly generated, and the intensity of the generated pattern can be adjusted using the Value +/- buttons. The available effects are listed below: 1.Broken Globe 2.Paparazzi 3.Television 4.Lightning 5.Police lights 6.Fireworks 7.Disco 8.Pulsing 9.Strobe 10.Fire 7 Warnings: This equipment emits bright light that can cause temporary or permanent damage to vision. Avoid looking directly into the LEDs while in use. This equipment does not contain user serviceable components. Modifications or repairs made to this product not authorized by Slite may void your right to use or operate this product. This equipment has surfaces which can get hot during operation. Take care when adjusting, moving, or touching the device, especially after prolonged use at high output levels. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for help. This device is not suitable for disposal in household waste. Dispose of as per local regulations or contact Slite to arrange disposal. 8 Troubleshooting ProblemTroubleshooting Steps When I plug a power supply into the USB-C port, the SLITE logo does not display on the screen and the unit does not turn on 1.See ‘Connecting to Power’ section. Check that the power supply is suitable for operating the Slite (USB-C PD of 65W or more). 2.If running from a power bank, check that the power bank is fully charged and hasn’t run out of battery. 3.Ensure you are using the supplied Slite USB-C cable. We strongly recommend only using the supplied Slite USB-C cable. 4.Check that the USB-C port isn’t damaged, and that the USB-C cable is a snug fit and doesn’t wiggle when inserted. When I plug a power supply into the USB-C port, the screen displays a warning about insufficient power. 1.Check that the power supply is suitable for operating the Slite (USB-C PD of 65W or more). 2.If running from a power bank, check that the power bank is fully charged and hasn’t run out of battery. 3.Ensure you are using the supplied Slite USB-C cable. We strongly recommend only using the supplied Slite USB-C cable. 4.Check that the USB-C port isn’t damaged, and that the USB-C cable is a snug fit and doesn’t wiggle when inserted. 9 Pressing the buttons on the unit does not do anything. 1.Check that the power supply is suitable for operating the Slite (USB-C PD of 65W or more). 2.If the screen is off, check that the unit does not turn on by pressing the Power button. 3.Check that the unit is not connected to the Slite app. The physical buttons on the unit are disabled in Effects Mode when controlled via the app. The screen will display “Effects (Control via App)”. The Slite doesn’t reach full brightness, or gets dim after se…

Text truncated - open the document above for the full version.

SlitePtyLtd Address:2/545KingStreet,WestMelbourne,VIC,Australia3003 Date:2023-04-06 FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing SUBJECT:FCCApplicationforFCCID:2BAIW-SLITE ToWhomItMayConcern: SlitePtyLtdcertifiesthat,asofthedateofthefilingoftheapplication,theapplicantisnot identifiedontheCoveredListasanentityproducing“covered”equipment. Sincerely, Signature: Date:2023-04-06

SlitePtyLtd Address:2/545KingStreet,WestMelbourne,VIC,Australia3003 Date:2023-04-06 FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing SUBJECT:FCCApplicationforFCCID:2BAIW-SLITE ToWhomItMayConcern: SlitePtyLtdcertifiesthattheequipmentforwhichauthorizationissoughtisnot“covered” equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903of theFCCrules. Sincerely, Signature: Date:2023-04-06

SlitePtyLtd U.S.AgentDesignationforServiceofProcess (ApplicantandU.S.AgentareSeparateParties) TO:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 ATTENTION:FCCCertification–Section2.911(d)(7)Information DesignatedU.S.Agent CompanyName:BaihetianInnovativeSolutions FRN:0033401605 ContactName:KennethYoung StreetAddress:6837ChaseRd City/Province/Zip:Dearborn,MI48126 TelephoneNo:313-395-3113 Email:[email protected] Thisletteristoconfirmthatwe(“theDesignatedU.S.Agent)haveacceptedtheresponsibilitytoactasthe DesignatedU.S.AgentforServiceofProcessasrequiredbysection47CFR2.911(d)(7)onbehalfofthe Applicantnotedbelow. U.S.AgentSignature: Date: Signedby(PrintedName/Title): TheApplicantacknowledgesthattheymustmaintainanagentfornolessthanoneyearafterterminatingall marketingandimportationORtheconclusionofanyCommission-relatedproceedinginvolvingthe equipment.TheapplicantfurtheracknowledgestheirresponsibilitytoinformtheFCCwheneverthe DesignatedU.S.Agentinformationabovechanges. Applicant Companyname:SlitePtyLtd GranteeCode:2BAIW FCCID:2BAIW-SLITE ContactName:MylesMunro StreetAddress:2/545KingStreet,WestMelbourne,VIC,Australia3003 City/Province/Zip:WestMelbourne/3003 TelephoneNo:+61419428572 Email:[email protected] ApplicantSignature: Date:2023.04.06 Signedby(PrintedName/Title):MylesMunro/Owner

SlitePtyLtd 2/545KingStreet,WestMelbourne,VIC,Australia3003 OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:April6,2023 Subject;RequestforConfidentiality FCCID:2BAIW-SLITE ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:MylesMunro Title:Owner E-Mail:[email protected]

EffectiveDate:April2, 2020QSF7.6.4-8– AgentAuthorizationLetterTemplatePage1 of 1 RevisionDate:Revision:0 Slite Pty Ltd 2/545 King Street,West Melbourne,VIC, Australia3003 Date：2023/04/06 ProductModelNumber:SLT001 FCC ID：2BAIW-SLITE To whomit may concern, Re:ProductCertificationRepresentativeAuthorizationLetter We authorizeQAI LaboratoriesLtd. 3980 North FraserWay, BurnabyB.C. CanadaV5J 5K5 to act on our behalfon all mattersconcerningthe abovenamedequipment. This shall includethe following: Testing Approvalapplicationsand procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: MylesMunro ContactListedon FCC Wesbite Title : Owner Email: [email protected] Telephone:+61 419 428 572 On behalfof: Slite Pty Ltd

OTA TEST REPORT Applicant Espressif Systems Product ESP-ANT A Model ESP-ANT A Report No. YXA1711-1424OTA01R3 Issue Date November 27, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2008. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Prepared b y: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 OTA Test Report Report No: YXA1711-1424OTA01R3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENTS 1. General Information ....................................................................................................................... 3 1.1. Notes of the Test Report ................................................................................................... 3 1.2. Testing laboratory .............................................................................................................. 3 1.3. Laboratory Environment .................................................................................................... 3 2. General Description of Equipment under Test ............................................................................... 4 2.1. Applicant Information ......................................................................................................... 4 2.2. Manufacturer Information .................................................................................................. 4 2.3. Information of EUT ............................................................................................................ 4 2.4. Test Date ........................................................................................................................... 4 2.5. Applied Standards ............................................................................................................. 5 3. Test Conditions .............................................................................................................................. 6 3.1. Test Configuration ............................................................................................................. 6 3.2. Test Measurement ............................................................................................................. 6 4. Test Results ................................................................................................................................... 7 4.1. Gain and Efficiency ............................................................................................................ 7 4.2. Voltage Standing Wave Ratio (VSWR) .............................................................................. 8 4.3. Antenna S11 ...................................................................................................................... 8 5. Test Equipment List ....................................................................................................................... 9 APPENDIX A: 2-D Pattern Plots ............................................................................................................. 10 APPENDIX B: The EUT Appearance and Test Configuration .................................................................. 11 B.1 EUT Appearance ................................................................................................................... 11 OTA Test Report Report No: YXA1711-1424OTA01R3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 3 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. General Information 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. This report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. 1.2. Testing laboratory Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] 1.3. Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect 0.7-6GHz > 100dB Ground resistance <0.5 OTA Test Report Report No: YXA1711-1424OTA01R3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 4 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2. General Description of Equipment under Test 2.1. Applicant Information Company: Espressif Systems Address: #204, Block 2, 690 Bibo Road, Zhang Jiang High-Tech Park, Shanghai, P. R. China 2.2. Manufacturer Information Company: Espressif Systems Address: #204, Block 2, 690 Bibo Road, Zhang Jiang High-Tech Park, Shanghai, P. R. China 2.3. Information of EUT General information EUT Description Product Name: ESP-ANT A Model ESP-ANT A HW Version: / SW Version: / Antenna Type: Fixed Antenna (PCB Antenna) Antenna Manufacturer: Espressif Systems Test Frequency: 2400MHz ~ 2500MHz Test lab. of the antenna gain and radiation pattern measurement: TA Technology (Shanghai) Co., Ltd. This revised report (R…

Text truncated - open the document above for the full version.

OTA TEST REPORT Applicant Espressif Systems Product ESP-ANT A Model ESP-ANT A Report No. YXA1711-1424OTA01R3 Issue Date November 27, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2008. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Prepared b y: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 OTA Test Report Report No: YXA1711-1424OTA01R3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENTS 1. General Information ....................................................................................................................... 3 1.1. Notes of the Test Report ................................................................................................... 3 1.2. Testing laboratory .............................................................................................................. 3 1.3. Laboratory Environment .................................................................................................... 3 2. General Description of Equipment under Test ............................................................................... 4 2.1. Applicant Information ......................................................................................................... 4 2.2. Manufacturer Information .................................................................................................. 4 2.3. Information of EUT ............................................................................................................ 4 2.4. Test Date ........................................................................................................................... 4 2.5. Applied Standards ............................................................................................................. 5 3. Test Conditions .............................................................................................................................. 6 3.1. Test Configuration ............................................................................................................. 6 3.2. Test Measurement ............................................................................................................. 6 4. Test Results ................................................................................................................................... 7 4.1. Gain and Efficiency ............................................................................................................ 7 4.2. Voltage Standing Wave Ratio (VSWR) .............................................................................. 8 4.3. Antenna S11 ...................................................................................................................... 8 5. Test Equipment List ....................................................................................................................... 9 APPENDIX A: 2-D Pattern Plots ............................................................................................................. 10 APPENDIX B: The EUT Appearance and Test Configuration .................................................................. 11 B.1 EUT Appearance ................................................................................................................... 11 OTA Test Report Report No: YXA1711-1424OTA01R3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 3 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. General Information 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. This report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. 1.2. Testing laboratory Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] 1.3. Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect 0.7-6GHz > 100dB Ground resistance <0.5 OTA Test Report Report No: YXA1711-1424OTA01R3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 4 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2. General Description of Equipment under Test 2.1. Applicant Information Company: Espressif Systems Address: #204, Block 2, 690 Bibo Road, Zhang Jiang High-Tech Park, Shanghai, P. R. China 2.2. Manufacturer Information Company: Espressif Systems Address: #204, Block 2, 690 Bibo Road, Zhang Jiang High-Tech Park, Shanghai, P. R. China 2.3. Information of EUT General information EUT Description Product Name: ESP-ANT A Model ESP-ANT A HW Version: / SW Version: / Antenna Type: Fixed Antenna (PCB Antenna) Antenna Manufacturer: Espressif Systems Test Frequency: 2400MHz ~ 2500MHz Test lab. of the antenna gain and radiation pattern measurement: TA Technology (Shanghai) Co., Ltd. This revised report (R…

Text truncated - open the document above for the full version.

IC:30164-SLITEPage 1 of 3 FCCID:2BAIW-SLITE ExternalPhotosoftheEUT IC:30164-SLITEPage 2 of 3 FCCID:2BAIW-SLITE IC:30164-SLITEPage 3 of 3 FCCID:2BAIW-SLITE

FCCID:2BAIW-SLITEPage 1 of 1 ReportNo.:CTL2302242041-WF FCCIDLabelInformation Labellocation: One Model:SLT001 FCCID:2BAIW-SLITE

IC:30164-SLITEPage 1 of 3 FCCID:2BAIW-SLITE InternalPhotosoftheEUT IC:30164-SLITEPage 2 of 3 FCCID:2BAIW-SLITE Bluetooth ANTENNA IC:30164-SLITEPage 3 of 3 FCCID:2BAIW-SLITE

FCCID:2BAIW-SLITEPage1of2ReportNo.:CTL2302242041-WF RFExposureevaluation FCCID:2BAIW-SLITE 1.Reference Accordingto§1.1307(b)(1),systemsoperatingundertheprovisionsofthissectionshallbe operatedinamannerthatensuresthatthepublicisnotexposedtoradiofrequencyenergy levelinexcessoftheCommission’sguidelines. Accordingto§1.1310and§2.1091RFexposureiscalculated. KDB662911D01:MobileandPortableDevicesRFExposureProceduresandEquipment AuthorizationPolicies 2.Limit LimitsforMaximumPermissibleExposure(MPE)/ControlledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) AveragingTime (minute) LimitsforOccupational/ControlledExposure 0.3–3.0 3.0–30 30–300 300–1500 1500–100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100)* (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 LimitsforMaximumPermissibleExposure(MPE)/UncontrolledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) AveragingTime (minute) LimitsforOccupational/ControlledExposure 0.3–3.0 3.0–30 30–300 300–1500 1500–100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100)* (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequencyinMHz *=Plane-waveequivalentpowerdensity FCCID:2BAIW-SLITEPage2of2ReportNo.:CTL2302242041-WF 3.MPECalculationMethod PredicationofMPElimitatagivendistance Equationfrompage18ofOETBulletin65,Edition97-01 S=PG/4πR² Where:S=powerdensity P=powerinputtoantenna G=powergainoftheantennainthedirectionofinterestrelativetoanisotropicradiator R=distancetothecenterofradiationoftheantenna 4.Result AsdeclaredbytheApplicant,theEUTisawirelessdeviceusedinafixapplication,atleast 20cmfromanybodypartoftheuserornearbypersons;fromthemaximumEUTRFoutput power,theminimumseparationdistance,r=20cm. Manufacturingtolerance BluetoothLowEnergy Channel240224402480 Target(dBm)2.03.03.0 Tolerance±(dB)1.01.01.0 BluetoothLow Energy (Antenna gain:3.71dBi) Max.Output Powerwith Tolerance (dBm) Max.Output Power (mW) Antenna Gain (Numeric) PowerDensity At20cm (mW/cm2) PowerDensity LimitFCC (mW/cm2) Test Results 4.000.00252.34960.01171.0000PASS 5.Conclusion TheSARevaluationisnotrequired.

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စ ဉ စစ    ဉ စဆ    ဉ စဇ    တ စဈ         တ ဆ  ဒ ဆစ      ဒ ဆဆ      ဒ ဆဇ        …

Text truncated - open the document above for the full version.