2BALN-OBZ10-AC-3P32EV Charger station

0.00kWh0.00kW Control Box LCD Display TS-NACS 12 12 22 23 24 17 18 19 Charging Station shell is broken divided into Type2, Type1, GB/T，Tesla four kinds of specifications. 8-10-13-16-20-25-32A8-10-13-16-20-25-32A Type2 IEC61851 8-10-13-16-20-25-32A 8-10-13-16-20-25-32-40A 8-10-13-16-20-25-32-40-50A 8-10-13-16-20-25-32A8-10-13-16-20-25-32A 6 TS-NACS TS-NACS TS-NACS 8-10-13-16-20-25-32A 8-10-13-16-20-25-32-40A 8-10-13-16-20-25-32-40-50A 0.00kWh0.00kW 7 0.00kWh0.00kW 8 0.00kWh0.00kW 9 0.00kWh0.00kW 0.00kWh0.00kW 10 8-10-13-16-20-25-32A,11KW version can set the current of 8-10-13-16A. 0.00kWh0.00kW 0.00kWh0.00kW 11 The device will keep charging for "X" Hours according to the time you setted. 1. Touch the panel icon area to upward, downward, enter, back and increase or decrease the parameters of the menu. Note: When the Charging plug is plugged in, it is not possible to enter the charging plan and load balance setting function. Need to pull out the charging plug to operate. Menu Setting About Device Rfid Manage Charge Log Charge Plan Menu Setting About Device Rfid Manage Charge Log Charge Plan 12

13 Menu Setting About Device Rfid Manage Charge Log Charge Plan One-off Plan Default Plan Default Start：Prohibit charging start time Default End：Prohibit charging end time Total Current：Load balancing,setting the total current value of the circuit Charge Plan One-off Plan Default Plan Charge Plan Set Current32A 00h 00h Delay Start Charge Time Charge PlanCharge Plan One-off Plan Default Plan Default Start Default End Total Current 00:00 00:00 80A This feature is only available for Dynamic Load Blancing Charging station. . Menu Charge Plan Setting About Device Rfid Manage Charge Log Charge Log Run Log Fault Log Charge Log Run Log Fault Log Charge Log Run Log Fault Log Run Log Fault Log Usage: U000014 Date:2024-01-01 Start Ti me: 00:02:46 User: Admi n-8C85A23 Time:00:00:03 Consumed: 0.000k Wh EndReason: Admin end Wrong:E000024 Data:2024-01-01 Start Ti me: 08:30:40 Error:ESB Error Walue:1 Wrong:E000023 Data:2024-01-01 Start Ti me:08:21:49 Error:PE Error Walue:1 Usage:U000013 Dat e: 2024-01-01 St art Time: 08:00:00 User : Unknow Time: 00:00:00 Consumed:0.000k EndReason:Unknaw end 15 Record the last 500 charging log Record the last 100 charging fault log Menu Charge Plan Setting About Device Charge Log Rfid Manage Charge Verify ID List Rfid Manage ON Charge Verify ID List Rfid Manage ON ID List ID List 2. 2. 7. 7. 3. 3. 8. 8. 4. 4. 9. 9. 5. 5. 10. 10. 1.6. 6. ID List 2.7. 3.8. 4.9. 5.10. 1.6. Tap the card ID List 2.7. 3.8. 4.9. 5.10. 1.8C85A23 1.8C85A23 6. Tap the Card to Delete 8C85A23 Charge Verify：Cancel or restart the use of RFID cards. ID List：Add a blank RFID card to the charging station that can be used. Delete RFID that has already been added. 14 Basis Settings Hotkeys:Turn on and off the lock button to prevent others from operating it Net Settings Wifi Info:Wireless network information Time Settings Local Time：Local time Leakage Check:Turn on and off the Leakage detection. To ensure safe charging, please use the charger in a leakage-protected condition. 5.Menu - Setting Ground Check：To turn on and off the grounding (PE) detection, please use the charging station in the grounded (PE) state Reset Wifi:Clear network configuration Set Date：Set date Set Time：Set time Set Timezone：Set the corresponding number of time zones according to your own time zone (e.g. East Zone 2, please set+2, West Zone 6, please set -6) 16 Menu Charge Plan About Device Rfid Manage Charge Log Setting Setting Basis Settings Net Settings Time Settings Setting Basis Settings Net Settings Time Settings Net Settings Wifi Info Reset Wifi Basis Settings HotkeysON ON ON Ground Check Leakage Check Setting Basis Settings Net Settings Time Settings Time Settings Local Time 2024-06-08 11:02:36 Set Date Set Time Set Timezone +0 The total current set on charging stations should be less or equal to household total current RFID 17 Menu Charge Plan Setting Rfid Manage Charge Log About Device About Device Device lnfo Key Data Menu Setting About Device Rfid Manage Charge Log Charge Plan Charge Plan Default Start Default End Total Current80A Charge Plan One-off Plan Default Plan The charging station is not on the same circuit with the smart meter but the smart meter should be on the same circuit with the household appliances 18 0.00kWh0.00kW 0.00kWh0.00kW Set Delay Time Set Charging Time Set Delay Time Set Charging Time ConnectNot connected 485 communication Connection waiting Connect Not connected Wifi State ConnectNot connected 485 communication Connection waiting Connect Not connected Wifi State Ground Check (PE) Ground Check (PE) 19 Control Box LCD Display Single-phase 0.00kWh0.00kW 0.00kWh0.00kW0.00kWh0.00kW0.00kWh0.00kW 0.00kWh0.00kW0.00kWh0.00kW0.00kWh0.00kW 0.00kWh0.00kW0.00kWh0.00kW0.00kWh0.00kW 0.00kWh0.00kW 0.00kWh0.00kW0.00kWh0.00kW0.00kWh0.00kW Set Delay TimeSet Charging Time Ready to Charge Swipe RFID Card Charging Over Voltage Under Voltage Leakage Over Current Leakage self check Relay self check Over TEMP Missing of PE Protection EMERGENCY STOP Signal Failure Err:cp Under Voltage Over Voltage Elec leakage Over Current Err:leakage_SC Over TEMP PE Fault Err: 20 0.00kWh0.00kW Control Box LCD Display Three-phase 0.00kWh0.00kW 0.00kWh0.00kW0.00kWh0.00kW0.00kWh0.00kW 0.00kWh0.00kW0.00kWh0.00kW0.00kWh0.00kW 0.00kWh0.00kW0.00kWh0.00kW0.00kWh0.00kW 0.00kWh0.00kW0.00kWh0.00kW Set Delay TimeSet Charging Time Ready to Charge Swipe RFID Card Charging Over Voltage Under Voltage Leakage Over Current Leakage self check Relay self check Over TEMP Missing of PE Protection EMERGENCY STOP Signal Failure Err:cp Under Voltage Over Voltage Elec leakage Over Current Err:leakage_SC Over TEMP PE Fault Err: 0.00kWh0.00kW 21 Step 1：According to the position of the holes on the metal Back mounting bracket, use an electric driller to drill holes in the corresponding positions . Please refer to the height in the photo below to determine the charger installation height. then put the expansion tube in the hole , and then use long screws fix the metal mounting bracket on the wall. Step 2：After fixed the metal bracket to the wall, hang the Step 3：Install the charging plug holder in the position shown in the pics above Step 4：Connect the power supply and make sure the charger can work properly charger on the bracket while using the screws to fix the Metal bracket underneath the charger to the wall. 22 23 24

(ShenzhenFeyreeTechnologyCo.,Ltd) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:August13,2024 FCCID:2BALN-OBZ10-AC-3P32 Ref.#1:AttestationStatementsPart2.911(d)(5)(i)Filing (“ShenzhenFeyreeTechnologyCo.,Ltd”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Ref.#2:AttestationStatementsPart2.911(d)(5)(ii)Filing (“ShenzhenFeyreeTechnologyCo.,Ltd”)certifiesthat,asofthedateofthefilingof theapplication,ShenzhenFeyreeTechnologyCo.,Ltdisnotidentifiedonthe CoveredListasanentityproducing“covered”equipment. Applicant:ShenzhenFeyreeTechnologyCo.,Ltd Address:2buildingsAseatThesecondfloor201,Hisenseindustrialparkin,Saxoroadno.2, Southbaystreet,LonggangDistrict,Shenzhen ContactPerson:AllenZhu Tel.:+86-13590497857 Email:[email protected] Sincerely, Signature:

ShenzhenFeyreeTechnologyCo.,Ltd Address：2buildingsAseatThesecondfloor201,Hisenseindustrialparkin,Saxoroadno.2, Southbaystreet,LonggangDistrict,Shenzhen Date:2024-08-20 FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2BALN-OBZ10-AC-3P32 FRN:0033551110 ShenzhenFeyreeTechnologyCo.,Ltdcertifiesthat,asofthedateofthefilingofthe application,GSSSERVICEINCisourdesignatedU.S.agentforserviceofprocessforthe abovereferencedFCCID.ShenzhenFeyreeTechnologyCo.,Ltdacceptstomaintainan agentfornolessthanoneyearafterthegranteehasterminatedallmarketingandimportation ortheconclusionofanyCommission-relatedproceedinginvolvingtheequipment. GSSSERVICEINCaccepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:GSSSERVICEINC Address:6547NAcademyBlvd#2266ColoradoSpringsCOLORADO80918UnitedStates FRN：0033402082 ContactPerson:michouxlogan Tel.:001-949-2990192 Email:[email protected] Sincerely, SignedonbehalfofShenzhenFeyree TechnologyCo.,Ltd SignedonbehalfofGSSSERVICEINC Name:AllenZhuName:michouxlogan Title:managerTitle:Manager Date:2024-08-20Date:2024-08-20

ShenzhenFeyreeTechnologyCo.,Ltd Date：2024-08-13 ProductModelNumber:F-OBZ10-AC-3P32, F-OBZ10-AC-1P32,F-OBZ10-AC-3P16,F-GBZ10-AC-1P32,F-GBZ10-AC- 3P16,F-GBZ10-AC-3P32,F-MBZ10-AC-1P32,F-MBZ10-AC-1P40,F- MBZ10-AC-1P50,F-TSZ10-AC-1P32,F-TSZ10-AC-1P40,F-TSZ10-AC-1P50 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatORGANIZATION.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyORGANIZATION.onourbehalf shallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:manager Email:[email protected] Telephone:+86-13590497857 Onbehalfof:ShenzhenFeyreeTechnologyCo.,Ltd

ShenzhenFeyreeTechnologyCo., Ltd Date: August20, 2024 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID:2BALN-OBZ10-AC-3P32 To WhomIt May Concern, Pursuantto the provisionsof the Commission’s rules Title 47 Sections§0.457 and §0.459,we are requestingthe Commissionto withholdthe followingattachment(s)as confidential documentsfrom publicdisclosureindefinitely. Thesedocumentscontaindetailedsystemand equipmentdescriptionsand are consideredas proprietaryinformationin operationof the equipment.The publicdisclosureof these documentsmight be harmfulto our companyand wouldgive competitorsan unfair advantage in the market. SchematicDiagram Block Diagram Parts List OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsfor UNII devices In additionalto abovementioneddocuments,in order to complywith the marketingregulations in Title 47 CFR §2.803 and the importationrules in Title 47 CFR §2.1204,while ensuringthat businesssensitiveinformationremainsconfidentialuntil the actualmarketingof newly authorizeddevices,we requestShort Term Confidentialityof the followingattachment(s); ExternalPhotos Test SetupPhotos InternalPhotos User Manual For 45 days, pursuantto PublicNoticeDA 04-1705. OR For 180 days pursuantto KDB 726920D01. It is our understandingthat all measurementtest reports,FCC ID label formatand correspondenceduringthe certificationreviewprocesscannotbe grantedas confidential documentsand this informationwill be availablefor publicreviewonce the grant of equipment authorizationis issued. Sincerely, Signature: Name:AllenZhu Title:manager

ShenzhenFeyreeTechnologyCo.,Ltd ModelDifference Productdescription:EVChargerstation Modelname:F-OBZ10-AC-3P32, F-OBZ10-AC-1P32,F-OBZ10-AC-3P16,F-GBZ10-AC-1P32,F-GBZ10-AC-3P16,F- GBZ10-AC-3P32,F-MBZ10-AC-1P32,F-MBZ10-AC-1P40,F-MBZ10-AC-1P50,F- TSZ10-AC-1P32,F-TSZ10-AC-1P40,F-TSZ10-AC-1P50 FCCID:2BALN-OBZ10-AC-3P32 F-OBZ10-AC-3P32istestedmodel,othermodelsarederivativemodels.Themodels areidenticalincircuitandproductmaterialandRFChipandPCBLayoutand Componentsandappearanceandantenna,Onlythemodelnamediffer,Sothetest dataofF-OBZ10-AC-3P32canrepresenttheremainingmodels. Regards Sincerely Client’ssignature: Client’sname/title:AllenZhu/manager Contactinformation/address:2buildingsAseatThesecondfloor201,Hisense industrialparkin,Saxoroadno.2,Southbaystreet, LonggangDistrict,Shenzhen

Srhenzhen Bolatu Innovative Product Development Co., Ltd. Address: 1703, Block A, Building 14, CITIC Innovation Industrial City, No. 12, Ganli 6th Road, Gankeng Community, Jihua Street, Longgang District, Shenzhen, Guangdong 14.5

ANTENNASPECIFICATION Summary ITEMNFCANTSPEC FrequencyRange13.56MHz MAX.Gain0dBi ModulationASK Impedance50Ohm Antenna type PCB Antenna Antenna model nameAntenna model name Srhenzhen Bolatu Innovative Product Development Co., Ltd. Address: 1703, Block A, Building 14, CITIC Innovation Industrial City, No. 12, Ganli 6th Road, Gankeng Community, Jihua Street, Longgang District, Shenzhen, Guangdong WBR3 37mm 38mm

(4*40)MM FCCID:2BALN-OBZ10-AC-3P32

FCCID:2BALN-OBZ10-AC-3P32 EUTPHOTOS(InternalPhotos) FCCID:2BALN-OBZ10-AC-3P32 FCCID:2BALN-OBZ10-AC-3P32 FCCID:2BALN-OBZ10-AC-3P32 BT&WIFI-ANT FCCID:2BALN-OBZ10-AC-3P32 FCCID:2BALN-OBZ10-AC-3P32 FCCID:2BALN-OBZ10-AC-3P32 ※※※※※ENDOFREPORT※※※※※ NFC-ANT

FCCID:2BALN-OBZ10-AC-3P32 RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1091， UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone 1-gheadorbodyand10-gextremitySARevaluationforgeneralpopulationexposure conditions,bymeasurementornumericalsimulation,isnotrequiredwhenthe correspondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactof humanexposuretoradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequency range (MHz) Electricfield strength (V/m) Magneticfield strength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthe totalpowerinputtotheantenna,throughthecalculation,wewillknowthedistancerwhere theMPElimitisreached. Test Procedure Softwareprovidedby clientenabledthe EUT to transmitand receivedata at lowest,middle and highestchannelindividually. Test Resultof RF ExposureEvaluation Frequency (MHz) Output powerto antenna (dBm) Outputpower to antenna (mW) PowerDensity at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 2440-0.790.830.0029391.0PASS 241212.3517.180.0608381.0PASS Remark:antennagain=2.5 dBi RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06Section4.3.1 StandaloneSARtestexclusionconsiderations:Unlessspecificallyrequiredbythe publishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-gextremity SARevaluationforgeneralpopulationexposureconditions,bymeasurementornumerical simulation,isnotrequiredwhenthecorrespondingSARTestExclusionThreshold condition(s),listedbelow,is(are)satisfied.Thesetestexclusionconditionsarebasedon source-basedtime-averagedmaximumconductedoutputpoweroftheRFchanne requiringevaluation,adjustedfortune-uptolerance,andtheminimumtestseparation distancerequiredfortheexposureconditions.Theminimumtestseparationdistance definedin4.1f)isdeterminedbythesmallestdistancefromtheantennaandradiating structuresoroutersurfaceofthedevice,accordingtothehostformfactor,exposure conditionsandplatformrequirements,toanypartofthebodyorextremityofauseror bystander.ToqualifyforSARtestexclusion,thetestseparationdistancesappliedmustbe fullyexplainedandjustified,typicallyintheSARmeasurementorSARanalysisreport,by theoperatingconfigurationsandexposureconditionsofthetransmitterandapplicablehost platformrequirements,accordingtotherequiredpublishedRFexposureKDBprocedures. WhennootherRFexposuretestingorreportingarerequired,astatementofjustification andcompliancemustbeincludedintheequipmentapproval,inlieuoftheSARreport,to qualifyforSARtestexclusion.Whenrequired,thedevicespecificconditionsdescribedin theotherpublishedRFexposureKDBproceduresmustbesatisfiedbeforeapplyingthese SARtestexclusionprovisions;forexample,handheldPTTtwo-wayradios,handsets, laptopsandtablets,etc. c)Forfrequenciesbelow100MHz,thefollowingmaybeconsideredforSARtestexclusion (alsoillustratedinAppendixC): 1)Fortestseparationdistances>50mmand<200mm,thepowerthresholdatthe correspondingtestseparationdistanceat100MHzinstepb)ismultipliedby [1+log(100/f(MHz))] 2)Fortestseparationdistances≤50mm,thepowerthresholddeterminedbytheequation inc)1)for50mmand100MHzismultipliedby½ (1)Pb(mW)*[1+log(100/f(MHz))]=474mW*[1+log(100/f(MHz))] (2)Pb(mW)*[1+log(100/f(MHz))]*0.5=474mW*[1+log(100/f(MHz))]*0.5=237*[1+log(100/f(M Hz))] TestProcedure: TXfrequencyrange:13.56MHz Devicecategory:Stationarytypeequipment(Distance:20mm)Max. FieldStrength:105.14dBuV/m@3m EIRP=E-104.7+20logD=105.09-104.7+20log3=9.93dBm MaximumConductedOutputPower:9.93dBm Turn-up:9±1 Here, Frequency(MHz) Min. Distance (mm) Max Power (dBm) Tune-uppower (dBm) MaxPower (mW) Limit (mW) SARTest Exclusion 13.56 ≤ 509.939 ± 110885.309Yes ThedevicedoesnotsupportthesimultaneousoperationofNFCandBLEandWIFI transmissionmodes SoaSARtestisnotrequired

Project No.: ZHT-240618020E Page 1 of 47 FCC TEST REPORT FCC ID:2BALN-OBZ10-AC-3P32 Report Number. .............................. : ZHT-240618020E Date of Test ...................................... : June 18, 2024 to June 28, 2024 Date of issue .................................... : June 28, 2024 Test Result ..................................... : PASS Testing Laboratory. ........................ : Guangdong Zhonghan Testing Technology Co., Ltd. Address .......................................... : Room 104, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Applicant's name ......................... : Shenzhen Feyree Technology Co., Ltd Address .......................................... : 2 buildings A seat The second floor 201, Hisense industrial park in, Saxo road no. 2, South bay street, Longgang District, Shenzhen Manufacturer's name ................... : Shenzhen Feyree Technology Co., Ltd Address .......................................... : 2 buildings A seat The second floor 201, Hisense industrial park in, Saxo road no. 2, South bay street, Longgang District, Shenzhen Test specification: Standard ........................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Test procedure ................................. : KDB558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2013 Non-standard test method ............. : N/A This device described above has been tested by ZHT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZHT, this document may be altered or revised by ZHT, personal only, and shall be noted in the revision of the document. Product name ................................. : EV Charger station Trademark ...................................... : Model/Type reference ...................... : F-OBZ10-AC-3P32, F-OBZ10-AC-1P32, F-OBZ10-AC-3P16, F-GBZ10-AC-1P32, F-GBZ10-AC-3P16, F-GBZ10-AC-3P32, F-MBZ10-AC-1P32, F-MBZ10-AC-1P40, F-MBZ10-AC-1P50, F-TSZ10-AC-1P32, F-TSZ10-AC-1P40, F-TSZ10-AC-1P50 Model Difference.............................: F-OBZ10-AC-3P32 is tested model, other models are derivative models .The models are identical in circuit and product material and RF Chip and PCB Layout and Components and appearance and antenna, Only the model name differ, So the test data of F-OBZ10-AC-3P32 can represent the remaining models. Project No.: ZHT-240618020E Page 2 of 47 Ratings ............................................. : Input: 100 - 240 V~, 50 / 60 Hz, 32 A Output: 100 - 240V~, 50 / 60Hz, 16 / 32A / Input: 400 V~, 50 / 60 Hz Output: 400 V~, 50 / 60 Hz, 16 / 32 A Project No.: ZHT-240618020E Page 3 of 47 Testing procedure and testing location: Testing Laboratory ................................... : Guangdong Zhonghan Testing Technology Co., Ltd. Address ...................................................... : Room 104, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Kevin Yang Tested by (name + signature) .................... : Baret Wu Reviewer (name + signature) ..................... : Levi Lee Approved (name + signature) .................... : Project No.: ZHT-240618020E Page 4 of 47 Table of Contents Page 1. VERSION ................................................................................................................................................. 6 2. SUMMARY OF TEST RESULTS ............................................................................................................. 7 2.1 TEST FACILITY ............................................................................................................................... 8 2.2 MEASUREMENT UNCERTAINTY .................................................................................................. 8 3. GENERAL INFORMATION ..................................................................................................................... 9 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................... 9 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 10 3.3 TEST SETUP CONFIGURATION .................................................................................................. 10 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) ..................................................... 11 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS................................................................................ 12 4.1 CONDUCTED EMISSION MEASUREMENT ................................................................................ 14 4.1.1 POWER LINE CONDUCTED EMISSION Limits ................................................................. 14 4.1.2 TEST PROCEDURE ............................................................................................................. 14 4.1.3 DEVIATION FROM TEST STANDARD ................................................................................ 14 4.1.4 TEST SETUP ........................................................................................................................ 15 4.1.5 EUT OPERATING CONDITIONS ......................................................................................... 15 4.2 RADIATED EMISSION MEASUREMENT ..................................................................................... 18 4.2.1 RADIATED EMISSION LIMITS ............................................................................................ 18 4.2.2 TEST PROCEDURE ............................................................................................................. 19 4.2.3 DEVIATION FROM TEST STANDARD ..............................................…

Text truncated - open the document above for the full version.

Project No.: ZHT-240618020E-1 Page 1 of 94 FCC TEST REPORT FCC ID:2BALN-OBZ10-AC-3P32 Report Number. .............................. : ZHT-240618020E-1 Date of Test ...................................... : June 18, 2024 to Aug. 20, 2024 Date of issue .................................... : Aug. 20, 2024 Test Result ....................................... : PASS Testing Laboratory. ........................ : Guangdong Zhonghan Testing Technology Co., Ltd. Address .......................................... : Room 104, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Applicant's name ......................... : Shenzhen Feyree Technology Co., Ltd Address .......................................... : 2 buildings A seat The second floor 201, Hisense industrial park in, Saxo road no. 2, South bay street, Longgang District, Shenzhen Manufacturer's name ................... : Shenzhen Feyree Technology Co., Ltd Address .......................................... : 2 buildings A seat The second floor 201, Hisense industrial park in, Saxo road no. 2, South bay street, Longgang District, Shenzhen Test specification: Standard .......................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Test procedure ................................. : KDB558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2013 Non-standard test method ............. : N/A This device described above has been tested by ZHT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZHT, this document may be altered or revised by ZHT, personal only, and shall be noted in the revision of the document. Product name ................................. : EV Charger station Trademark ...................................... : Model/Type reference ...................... : F-OBZ10-AC-3P32, F-OBZ10-AC-1P32, F-OBZ10-AC-3P16, F-GBZ10-AC-1P32, F-GBZ10-AC-3P16, F-GBZ10-AC-3P32, F-MBZ10-AC-1P32, F-MBZ10-AC-1P40, F-MBZ10-AC-1P50, F-TSZ10-AC-1P32, F-TSZ10-AC-1P40, F-TSZ10-AC-1P50 Model Difference..............................: F-OBZ10-AC-3P32 is tested model, other models are derivative models .The models are identical in circuit and product material and RF Chip and PCB Layout and Components and appearance and antenna, Only the model name differ, So the test data of F-OBZ10-AC-3P32 can represent the remaining models. Project No.: ZHT-240618020E-1 Page 2 of 94 Ratings ............................................. : Input: 100 - 240 V~, 50 / 60 Hz, 32 A Output: 100 - 240V~, 50 / 60Hz, 16 / 32A / Input: 400 V~, 50 / 60 Hz Output: 400 V~, 50 / 60 Hz, 16 / 32 A Project No.: ZHT-240618020E-1 Page 3 of 94 Testing procedure and testing location: Testing Laboratory ................................... : Guangdong Zhonghan Testing Technology Co., Ltd. Address ...................................................... : Room 104, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Kevin Yang Tested by (name + signature) .................... : Baret Wu Reviewer (name + signature) ..................... : Levi Lee Approved (name + signature) .................... : Project No.: ZHT-240618020E-1 Page 4 of 94 Table of Contents Page 1. VERSION .................................................................................................................................................... 6 2. SUMMARY OF TEST RESULTS ............................................................................................................... 7 2.1 TEST FACILITY .................................................................................................................................. 8 2.2 MEASUREMENT UNCERTAINTY ..................................................................................................... 8 3. GENERAL INFORMATION ........................................................................................................................ 9 3.1 GENERAL DESCRIPTION OF EUT .................................................................................................. 9 3.2 DESCRIPTION OF TEST MODES ................................................................................................... 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED .............................. 11 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) ....................................................... 11 3.5EQUIPMENTS LIST FOR ALL TEST ITEMS ................................................................................... 12 4. EMC EMISSION TEST ............................................................................................................................. 14 4.1 CONDUCTED EMISSION MEASUREMENT ................................................................................... 14 4.1.1 POWER LINE CONDUCTED EMISSION Limits ................................................................... 14 4.1.2 TEST PROCEDURE ................................................................................................................ 14 4.1.3 DEVIATION FROM TEST STANDARD .................................................................................. 14 4.1.4 TEST SETUP ........................................................................................................................... 15 4.1.5 EUT OPERATING CONDITIONS ............................................................................................ 15 4.2 RADIATED EMISSION MEASUREMENT ....................................................................................... 18 4.2.1 RADIATED EMISSION LIMITS ............................................................................................... 18 4.2.2 TEST PROCEDURE .......................…

Text truncated - open the document above for the full version.

FCCID:2BALN-OBZ10-AC-3P32 EUTTESTPHOTOS FCCID:2BALN-OBZ10-AC-3P32