2BAMERS510ARFID Reader

Radar Origin Size Drawing No. Rev. Nomenclature Sheet San Diego, CA A LBL-8004-01 A1 RS510 User’s Manual 1 of 5 RADAR HQ, 15150 Avenue of Science, Ste. 200, San Diego, CA 92128 Automaton Inc dba RADAR. RFID Sensor RS510 User’s Manual Radar Origin Size Drawing No. Rev. Nomenclature Sheet San Diego, CA A LBL-8004-01 A1 RS510 User’s Manual 2 of 5 RADAR HQ, 15150 Avenue of Science, Ste. 200, San Diego, CA 92128 Table of Contents 1 Scope ............................................................................................................................................................................... 3 2 Regulatory Notes ............................................................................................................................................................. 3 3 Label Quick Response Code: QR Code .......................................................................................................................... 4 4 Operation ......................................................................................................................................................................... 6 5 Ceiling Mount Instructions................................................................................................................................................ 6 Figures Figure 1: Sensor indicating RJ45 Ethernet Connector ........................................................................................................... 6 Figure 2: Mounting Bracket ..................................................................................................................................................... 7 Figure 3: Sensor attachment bracket and Ethernet cable installed. ....................................................................................... 7 Radar Origin Size Drawing No. Rev. Nomenclature Sheet San Diego, CA A LBL-8004-01 A1 RS510 User’s Manual 3 of 5 RADAR HQ, 15150 Avenue of Science, Ste. 200, San Diego, CA 92128 1 Scope The Radar system is an overhead RFID system using proprietary sensors installed on the ceiling for the purpose of emitting radio frequency energy that scans price tags located on items such as clothing, boxes etc. 2 Regulatory Notes This device is approved under FCC ID: 2BAMERS510A. This guide applies to the following Model Number: RS510A All GoRadar devices are designed to be compliant with the rules and regulations in the locations where they are sold and will be labeled as required. Pacemakers Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) must be maintained. between a wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers: Should ALWAYS keep the device more than 15 cm (6 inches) from their pacemaker when turned ON. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines To comply with FCC RF exposure requirements, this device must operate with a minimum separation distance of 23cm from all persons. Co-location statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling. Radar Origin Size Drawing No. Rev. Nomenclature Sheet San Diego, CA A LBL-8004-01 A1 RS510 User’s Manual 4 of 5 RADAR HQ, 15150 Avenue of Science, Ste. 200, San Diego, CA 92128 Radio Frequency Interference Requirements - FCC Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. GOVERNMENT END USERS RESTRICTED RIGHTS. This provision only applies to U.S. Government end users. The Software is a "commercial item" as that term is defined at 48 C.F.R. Part 2.101, consisting of “commercial computer software” and “computer software documentation” as such terms are defined in 48 C.F.R. Part 252.227-7014(a)(1) and 48 C.F.R. Part 252.227-7014(a)(5), and used in 48 C.F.R. Part 12.212 and 48 C.F.R. Part 227.7202, as applicable. Consistent with 48 C.F.R. Part 12.212, 48 C.F.R. Part 252.227-7015, 48 C.F.R. Part 227.7202-1 through 227.7202-4, 48 C.F.R. Part 52.227-19, and other relevant sections of the Code of Federal Regulations, as applicable, the Software is distributed and licensed to U.S. Government end users (a) only as a commercial item, and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions contained herein. 15.21 Information to user. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 3 Label Quick Response Code: QR Code The Quick Response code on the left side of the label, when scanned using the appropriate multi-media device, provides a link to NON-Regulatory information regarding RADAR’s products a…

Text truncated - open the document above for the full version.

CKC Certification Services, LLC CB: US0103; NB/AB: 0976 5046 Sierra Pines Drive Mariposa, CA 95338 Phone: 1 800-500-4EMC (4362) Fax: 209-787-5568 Email: [email protected] APP-FCC-A Page 1 of 2 Rev 3 APP-FCC-A Applicant Attestation Applicant Information Company Name: Automaton, Inc (dba RADAR) Contact Name: Craig Owens Contact Title: Head of Hardware Engineering Company Address: 15150 Avenue of Science, Suite 200 San Diego, CA 92128 United States Telephone No: 760-415-3730 Facsimile No: 760-295-5990 Email Address: [email protected] Certification Type / Equipment Identification Certification Program: FCC Equipment Authorization / Radio Certification Certification Number: 2BAMERS510A The equipment identified above ☐ is / ☒ is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR Part 2, Subpart J, §2.903. The applicant identified above ☐ is / ☒ is not identified on the FCC’s “Covered List” as an entity, affiliate, or subsidiary which produces equipment on the “Covered List” or identified as an entity which has rebranded or relabeled equipment produced by entities identified on the “Covered List.” I hereby attest and certify that the above statements are true and correct. Signature of Authorized Individual: 1 Printed Name: Craig Owens Title of authorized signature: Head of Hardware Engineering Date 5/18/2023 Note this attestation shall be signed by the applicant or their direct appointee within the same legal entity. A third party agent is not permitted to sign on behalf of the applicant. 1 Signature is not subject to the FCC’s authorized individual policy ( KDB 852134) and may be signed by any appropriate company official. CKC Certification Services, LLC CB: US0103; NB/AB: 0976 5046 Sierra Pines Drive Mariposa, CA 95338 Phone: 1 800-500-4EMC (4362) Fax: 209-787-5568 Email: [email protected] APP-FCC-A Page 2 of 2 Rev 3 Attachment A – Additional Information The FCC’s “Covered List” includes certain “telecommunications equipment” and “video surveillance equipment” produced by specific manufacturers, their Affiliates or Subsidiaries and including any products produced by these entities which are rebranded or relabeled by other entities. (191, 184, 185, 188) 2 The FCC claims the identified equipment poses an unacceptable risk to United States national security. Telecommunications Equipment (195) : Any equipment used in fixed or mobile networks that provides advanced communications service, provided the equipment includes or uses electronic components, as defined under section 1.50001(c). Video Surveillance Equipment (205) : Any equipment that is used in fixed and mobile networks that provides advanced communications service in the form of a video surveillance service, provided the equipment includes or uses electronic components. Advanced Communications Service (195, 205) Any equipment that can be used in such a fixed or mobile broadband network to enable users to originate and receive high quality voice, data, graphics, and video telecommunications service using any technology with connection speeds of at least 200 kbps in either direction. Affiliate (183) : An entity that (directly or indirectly) owns or controls, is owned or controlled by, or is under common ownership or control with, another entity, where the term “own” means to have, possess, or otherwise control an equity interest (or the equivalent thereof) of more than 10 percent. Subsidiary (184) : Any entity in which such named entity directly or indirectly (1) holds de facto control or (2) owns or controls more than 50% of the total voting power of the entity’s outstanding voting stock. Useful Links: FCC Covered List https://www.fcc.gov/supplychain/coveredlist 47 CFR Part 2 Subpart J (including 2.903 and 2.911) https://www.ecfr.gov/current/title-47/chapter-I/subchapter-A/part-2/subpart-J FCC KDB System: https://apps.fcc.gov/oetcf/kdb/index.cfm FCC Report and Order 22-84 https://docs.fcc.gov/public/attachments/FCC-22-84A1.pdf 2 Parenthetical references are citations of paragraph numbers in FCC Report and Order FCC 22-84 (ET Docket 21.232).

Attestation For United States Agent for Service of Process Self-Designation for US Based Manufacturers Only CKC CS PUB FCC AFSOP Self Designation v3 Applicant / Equipment Manufacturer Information Company Name: Automaton, Inc (dba RADAR) Grantee Code: 2BAME FRN: 0033558032 Applicant Attestation The undersigned hereby consents: a) to self-designation as US Agent for Service of Process; and b) to accept responsibility and obligation to maintain self-designation for no less than one year after either all marketing and importation of the applicable equipment within the U.S has been permanently terminated, or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later; and c) to accept service of process in the US for matters related to the applicable equipment and at the physical address and email address identified in the applicant’s grantee code registration for equipment authorization applications under certification pursuant to 47 CFR Part 2 Subpart J; and d) to maintain current grantee code information on file in accordance with 47 CFR Part 2.929. Signature Applicant: Automaton, Inc (dba RADAR) Date: 5/12/2023 Printed Name: Craig Owens

Automaton, Inc (dba RADAR) 15150 Avenue of Science, Suite 200 San Diego, CA 92128 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 4/26/2023 To: Whom it May Concern: We hereby delegate CKC Certification Services, LLC (CKC CS) power of attorney to act on our behalf in matters pertaining to certification of FCC ID: 2BAMERS510A. The actions of CKC CS shall be considered the same as our own. Sincerely, Craig Owens Automaton, Inc (dba RADAR) Head of Hardware Engineering [email protected]

Automaton, Inc (dba RADAR) 15150 Avenue of Science, Suite 200 San Diego, CA 92128 5/12/2023 To Whom it May Concern: I hereby appoint Craig Owens to sign letters and applications for any filings with regulatory agencies on our behalf, and to receive and exchange data between our company, the agents company and the agency in connection with certification for any products that our company owns or manufactures. Sincerely, Paul Petrus Automaton, Inc (dba RADAR) Chief Technical Officer [email protected]

Automaton, Inc (dba RADAR) 15150 Avenue of Science, Suite 200 San Diego, CA Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 4/26/2023 Subject: Label Statement, FCC ID: Federal Communications Commission In accordance with CFR Section 2.925 and FCC KDB 784748 D02 we provide the following attestations. At the time of purchase, the FCC ID is readily and physically visible to the purchaser on the exterior package per 2.925. The FCC ID will be readily legible without the aid of magnification according to 2.925(a).. The literature in the package describes how to access the electronic display to find the FCC ID per 2.295 9e) and FCC KDB 784748 . The user will be able to access this information within a maximum of 3 steps. We Radar have programmed the e-label and it is not modified by any third party. The user will be able to access this information without a sim card, special accessories, or supplemental plugins. The FCC ID will be able to survive normal shipping and handling so it is visible for inspection. Sincerely, Craig Owens Automaton, Inc (dba RADAR) Head of Hardware Engineering [email protected]

Automaton, Inc (dba RADAR) 15150 Avenue of Science, Suite 200 San Diego, CA 92128 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 02/15/2023 Subject: Request for Permanent Confidentiality In accordance with 47CFR Section 0.457 and Section 0.459 pertaining to confidential material, we hereby request to hold permanently confidential all information contained within the below identified exhibits/document categories submitted pursuant to radio equipment certification requirements for FCC ID: 2BAMERS510A. 1. Block Diagram 2. Operational Description 3. Theory of Operation 4. Schematics 5. Bill of Material Parts List The above material contains trade secrets and proprietary information as specified by 47CFR 0.457(d) and technical data, which would customarily be guarded from competitors. The public disclosure of this information might be harmful to our company and provide unjustified benefits to our competitors. Sincerely, Craig Owens Automaton, Inc (dba RADAR) Head of Hardware Engineering [email protected]

Automaton, Inc (dba RADAR) 15150 Avenue of Science, Suite 200 San Diego, CA 92128 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 4/27/2023 Subject: Request for Temporary Confidentiality In accordance with 47CFR Section 0.457 and Section 0.459, FCC Public Notice DA04-1705 and KDB Publication 726920 pertaining to confidential material, we hereby request to hold temporarily confidential all information contained within the below identified exhibit categories submitted pursuant to equipment certification requirements for FCC ID: 2BAMERS510A until 11/9/2023. 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The above material contains trade secrets and proprietary information as specified by 47CFR 0.457(d) and technical data, which would customarily be guarded from competitors. Pre- marketing public disclosure of this information might be harmful to our company and provide unjustified benefits to our competitors. We understand that upon public certification listing in the FCC equipment authorization system, importation and distribution of the product(s) attached to this certification are permitted. We hereby acknowledge that the product may not be marketed (e.g. advertised, sold, leased or offered for sale or lease) until the short term confidentiality period has ended. Sincerely, Craig Owens Automaton, Inc (dba RADAR) Head of Hardware Engineering [email protected]

Radar Origin Size Drawing No. Rev. Nomenclature Sheet San Diego, CA A LBL-8004-01 A FCC COMPLIANCE LABEL, RS510 1 of 5 [email protected] | RADAR HQ, 15150 Avenue of Science, Ste. 200, San Diego, CA 92128 Automaton Inc dba RADAR. RFID Sensor RS510 Label Document APPROVALS RADAR San Diego CA, 92128 ORIGINATOR DATE M. Easton 02/2023 MECHANICAL ENGINEER DATE TITLE R. Marcks 02/2023 FCC COMPLIANCE LABEL, RS510 SIZE Origin DWG. NO. REV. RELEASED DATE A San Diego,CA LBL-8004-01 A PROGRAM MANAGER DATE DCR NO. V. Chin SCALE SHEET DOCUMENT CONTROL NONE 1 of 5 Radar Origin Size Drawing No. Rev. Nomenclature Sheet San Diego, CA A LBL-8004-01 A FCC COMPLIANCE LABEL, RS510 2 of 5 [email protected] | RADAR HQ, 15150 Avenue of Science, Ste. 200, San Diego, CA 92128 Table of Contents 1 Scope ............................................................................................................................................................................... 3 2 Label Description ............................................................................................................................................................. 3 3 Label Quick Response Code: QR Code .......................................................................................................................... 3 4 Label Manufacture Notes ................................................................................................................................................. 5 Figures Figure 1 – Label Outline and Verbiage ................................................................................................................................... 3 Figure 2: Label Location .......................................................................................................................................................... 4 Radar Origin Size Drawing No. Rev. Nomenclature Sheet San Diego, CA A LBL-8004-01 A FCC COMPLIANCE LABEL, RS510 3 of 5 [email protected] | RADAR HQ, 15150 Avenue of Science, Ste. 200, San Diego, CA 92128 1 Scope This document describes the label that will be attached on the sensor. 2 Label Description The label out line and verbiage is shown in Figure 1. The label will be located on the topside of the sensor as shown in Figure 2. The label dimensions are 26mm in height and 80 mm in total length. Figure 1 – Label Drawing and Verbiage 3 Label Quick Response Code: QR Code The Quick Response code on the left side of the label, when scanned using the appropriate multi-media device, provides a link to NON-Regulatory information regarding RADAR’s products and patents as posted on their website. To view the information: 1. Open the Camera app from the Home Screen, Control Centre or Lock Screen. 2. Select the rear-facing camera. Hold your device so that the QR code appears in the viewfinder in the Camera app. ... 3. Tap the notification to open the link associated with the QR code. Radar Origin Size Drawing No. Rev. Nomenclature Sheet San Diego, CA A LBL-8004-01 A FCC COMPLIANCE LABEL, RS510 4 of 5 [email protected] | RADAR HQ, 15150 Avenue of Science, Ste. 200, San Diego, CA 92128 Figure 2: Label Location Radar Origin Size Drawing No. Rev. Nomenclature Sheet San Diego, CA A LBL-8004-01 A FCC COMPLIANCE LABEL, RS510 5 of 5 [email protected] | RADAR HQ, 15150 Avenue of Science, Ste. 200, San Diego, CA 92128 4 Label Manufacture Notes Script file to be created by manufacturing must match this number LBL-8004-01 document exactly and have same revision. Markings and dimensions shall remain the same size when printed. Label markings and dimensions shall remain the same size when fabricated Label text must be 4PT minimum character height. All markings and text to be in black print.

LP100045_RFX MPE Report Form_Rev10 RADIO FREQUENCY EXPOSURE REPORT FOR THE RFID sensor operating in the UHF band Model: RS510 Report No.: 108261-10 Date of issue: June 5, 2023 PREPARED FOR: Mark Easton Automation Inc. dba RADAR 15150 Avenue of Science, Ste. 200 San Diego, CA 92121 PREPARED BY: E. WONG CKC Laboratories, Inc. 5046 Sierra Pines Drive Mariposa, CA 95338 The test data contained in this report documents the observed testing parameters pertaining to and are relevant for only the sample equipment tested in the agreed upon operational mode(s) and configuration(s) as identified herein. Compliance assessment remains the client’s responsibility. This report may not be used to claim product endorsement by A2LA or any government agencies. This test report has been authorized for release under quality control from CKC Laboratories, Inc. Steve Behm Director of Quality Assurance & Engineering Services CKC Laboratories, Inc. Page 2 of 13 Report No: 108261-10 Purpose: To demonstrate compliance with United States for Mobile equipment (devices used >20cm from the body) where Maximum Permissible Exposure (MPE) Calculations apply. Device and Antenna Operating Configuration: Device operating at maximum output power with continuous transmission of modulated data. Method: This equipment is evaluated in accordance with the guidelines set forth in 47 CFR 1.1310, KDB 447498 & ANSI C95.1 for the US. Other Considerations: Report considers stand-alone equipment configurations only. RF Exposure limits are calculated at the mid-point of each operating band. MPE calculated with high conducted power, minimum antenna gain, and lower conducted power and maximum antenna gain. Referenced Test Reports: The following test reports were referenced in conjunction with this assessment: 108261-06 108261-09 SGS antenna gain report 208324 Decision Rule: Outcome of RF exposure assessment is listed in the comment section(s) below as a binary statement for simple acceptance rule according to ILAC-G8 (2019). Page 3 of 13 Report No: 108261-10 RF Exposure Mobile Equipment Assessment Power Density Calculations (Single Transmitter, Stand Alone) MPE Calculation: 푃표푤푒푟 퐷푒푛푠푖푡푦 ( 푆 ) = 퐸퐼푅푃 4휋 푑 2 Given: EIRP in mW or W and d in cm or m US MPE Assessment Power Reported is: ☒ Peak ☐ Average Limit Used is: ☒ General Population ☐ Occupational Exposure Operating Band MHz Power dBm Ant Type/Gain dBi EIRP dBm Distance cm MPE mW/cm 2 Limit mW/cm 2 Comment 914.75 29.1 Patch array 6.12 35.2 23 0.50 0.61 Pass 914.75 26.6 Patch array 9.28 35.9 23 0.58 0.61 Pass Page 4 of 13 Report No: 108261-10 Summary: Exemptions: Equipment demonstrating compliance by portable RF exposure exemption have been evaluated, without further testing, for use under either portable or mobile RF exposure configurations. Additional configurations including collocation or simultaneous transmission with other transmitters (including necessary separation distances) are subject to further assessment. Certain exemption criteria may define specific separation distances. It is assumed that the manufacturer shall design the equipment such that these minimum separation distances are met. MPE Calculation Results: Equipment demonstrating compliance with MPE calculations have been evaluated, without further testing, for use under mobile RF exposure configurations as identified herein. Additional configurations including collocation or simultaneous transmission with other transmitters (including necessary separation distances) are subject to further assessment. It is assumed that the manufacturer shall design the equipment such that the minimum separation distance of 20cm (or greater, as listed above) is met or that the manufacturer provides a protection guide (e.g., installation instructions) to the end user such that the antenna(s) may be installed in accordance with the manufacturer’s instructions in such a manor to maintain the minimum separation distance. General Comments: The absorption and distribution of Electromagnetic energy in the body is a very complex phenomena that depends on the mass, shape, and physiological condition of the body; the orientation of the body with respect to the fields; and the electrical properties of the body and the environment. Variables that may play a substantial role in possible biological effects are those that characterize the environment (including but not limited to: ambient temperature, air velocity, relative humidity and body insulation); and those that characterize the individual (including but not limited to: age, gender, activity level, and existing debilitation or disease). Because innumerable factors may interact to determine specific biological effects of exposure to electromagnetic fields, any protection guide should consider both intended and unintended operational environments and provide guidance for installation and use of the equipment such that proper separation distances can be maintained. (ANSI C95.1). Page 5 of 13 Report No: 108261-10 APPENDIX A - RF Exposure Limits United States Compliance Requirements (1.1310): RF Exposure Evaluation Limits Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3-3.0 614 1.63 *(100) < 6 3.0-30 1842 / f MHz 4.89 / f MHz *(900 / f MHz 2 ) < 6 30-300 61.4 0.163 1 < 6 300-1500 -- -- f MHz / 300 < 6 1500-100,000 -- -- 5.0 < 6 RF Exposure Evaluation Limits General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3-1.34 614 1.63 *(100) < 30 1.34-30 824 / f MHz 2.19 / f MHz *(180 / f MHz 2 ) < 30 30-300 27.5 0.073 0.2 < 30 300-1500 -- -- f MHz / 1500 < 30 1500-100,000 -- -- 1.0 < 30 * Plane wave equivalent power density Limit is calculated based on the mid-band frequency used in the operating frequency range. Exemption Limits for Stand-Alone SAR Evaluation: In ac…

Text truncated - open the document above for the full version.

This report contains a total of 103 pages and may be reproduced in full only. Partial reproduction may only be done with the written consent of CKC Laboratories, Inc. Automation Inc. dba RADAR TEST REPORT FOR RFID sensor operating in the UHF band Model: RS510 Tested to The Following Standards: FCC Part 15 Subpart C Section(s) 15.207 & 15.247 (FHSS 902-928MHz) Report No.: 108261-6 Date of issue: June 2, 2023 Test Certificate # 803.01 This test report bears the accreditation symbol indicating that the testing performed herein meets the test and reporting requirements of ISO/IEC 17025 under the applicable scope of testing for CKC Laboratories, Inc. We strive to create long-term, trust-based relationships by providing sound, adaptive, customer first testing services. We embrace each of our customers’ unique EMC challenges, not as an interruption to set processes, but rather as the reason we are in business. Page 2 of 103 Report No.: 108261-6 TABLE OF CONTENTS Administrative Information .......................................................................................................................... 3 Test Report Information ............................................................................................................................................ 3 Report Authorization ................................................................................................................................................. 3 Test Facility Information ............................................................................................................................................ 4 Software Versions ...................................................................................................................................................... 4 Site Registration & Accreditation Information .......................................................................................................... 4 Summary of Results ................................................................................................................................................... 5 Modifications During Testing ..................................................................................................................................... 5 Conditions During Testing.......................................................................................................................................... 5 Equipment Under Test ............................................................................................................................................... 6 General Product Information..................................................................................................................................... 7 FCC Part 15 Subpart C ................................................................................................................................. 12 15.247(a) Transmitter Characteristics ..................................................................................................................... 12 15.247(a)(1)(i) Occupied Bandwidth.................................................................................................................... 13 15.247(a)(1) Carrier Separation ........................................................................................................................... 15 15.247(a)(1)(i) Number of Hopping Channels ..................................................................................................... 16 15.247(a)(1)(i) Time of Occupancy ...................................................................................................................... 17 15.247(b)(2) Output Power ..................................................................................................................................... 24 15.247(d) RF Conducted Emissions & Band Edge .................................................................................................... 36 15.247(d) Radiated Emissions & Band Edge ............................................................................................................ 49 15.207 AC Conducted Emissions ...........................................................…

Text truncated - open the document above for the full version.