2BAOA-BEACONHeavys Beacon

UNITED STATES DESIGNATED AGENT LETTER Date: August 5, 2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant&U.S. designated agent Company Name: Heavys Inc Contact Name: Jason Locker Address: 1216 BroadwayNomadword c/o Heavys Inc, City/Province/Zip: New York NY 10001, United States of America Telephone: 516-698-5895 Email: [email protected] FRN: 0033574419 Applicable Equipment: FCC ID: 2BAOA-BEACON ATTN: Director of Certification: We, < Heavys Inc> understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Heavys Inc> acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant &U.S. designated agent Heavys Inc Name (Printed): Jason Locker Title: Manager Signature:

HeavysInc To:FederalCommunicationsCommissionDate:July15,2026 7435OaklandMillsRoad Columbia,MD21046 USA Attestation Section2.911(d)(5)(i)andSection2.911(d)(5)(ii) (KDB986446D01CoveredEquipment) Section2.911(d)(5)(i) HeavysInc(“theapplicant”)certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Thesoftwaretobeloadedpriortomarketingoftheequipmentidentifiedbelowisnot "covered"softwaremanufacturedbyanyentityincludingpredecessors,successors, parents,subsidiaries,oraffiliatesoranyentitywhichhasrebrandedorrelabeledthe softwareproducedbytheentity(ies)identifiedonthe"CoveredList"DA24-886and KDB986446D01CoveredEquipmentGuidancesectionB(2a). HeavysInc(“theapplicant”)furthercertifiesthatnoCybersecurityoranti-virus softwareproducedorprovidedbyKasperskyLab,Inc.oranyofitssuccessorsand assignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwareisinstalledinthe equipmentbeingcertified. InaccordancewithFCC26-50regulations,HeavysInc(“theapplicant”)hereby certifiesthatnocriticalpartsproducedorprovidedbyanyentityontheCoverList,or theirrespectivesubsidiaries,areincorporatedwithinthedeviceawaitingcertification. Section2.911(d)(5)(ii) HeavysInc(“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication, theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityor anyofitssubsidiariesoraffiliates)asanentityproducing“covered”equipment. TypeofEquipmentsubjecttoFCCCertification: FCCID:2BAOA-BEACON Ifyouhaveanyquestions,pleasefeelfreetocontactme ContactPerson:JasonLocker PositionintheCompany:Manager DateofSignature: ___________________________ Signatory (signatureoftheapplicant)

Date: 15 July 2026 Heavys Inc To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: Heavys Inc, the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the Heavys Inc. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2BAOA-BEACON including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the Heavys Inc. The Heavys Inc also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, _______ Jason Locker

Date: 15 July 2026 Heavys Inc To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Heavys Inc FCC ID: 2BAOA-BEACON FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Heavys Increquests that the following documents regarding this submission for FCC ID: 2BAOA-BEACON be kept confidential: And below exhibit kept short-term confidential Exhibit Type Block Diagram Schematics Operational Description BO0 File Name Block Diagram.pdf Schematics.pdf Operational Description.pdf BO0.pdf (180 days): External photos External photos.pdf Test setup photos test photo.pdf Internal photos Internal photos.pdf User manual User manual.pdf Those documents contain detailed system and equipment description and related information about the product which Heavys Incconsiders to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Heavys Incconsiders this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours Sincerely, Jason Locker

Label&Location：

Report No.: Ti-EE26060254-703 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 33 Web: www.titcgroup.com Template No.: TRP-FCC DASY-Body-1 (2026-04-30) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen TEST REPORT Applicant: Heavys Inc Address: 1216 Broadway Nomadword c/o Heavys Inc, New York NY 10001, United States of America. Equipment Type: Heavys Beacon Model Name: gaming-dongle Brand Name: Heavys FCC ID: 2BAOA-BEACON Test Standard: FCC 47 CFR Part 2.1093 (refer to section 3.1) Maximum SAR: Body 2.4GHz(1 g@5mm): 0.58 W/kg Sample Arrival Date: Jun. 02, 2026 Test Date: Aug. 26, 2026 Date of Issue: Sep. 01, 2026 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Xu Rui Checked by: Zong Liyao Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: Ti-EE26060254-703 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 33 Web: www.titcgroup.com Template No.: TRP-FCC DASY-Body-1 (2026-04-30) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen Revision History Version Issue Date Revisions Content Rev. 01 Sep. 01, 2026 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 4 1.1 Test Laboratory ............................................................................................................ 4 1.2 Test Location ................................................................................................................ 4 1.3 Test Environment Condition .......................................................................................... 4 2 PRODUCT INFORMATION ....................................................................................................... 5 2.1 Applicant Information .................................................................................................... 5 2.2 Manufacturer Information .............................................................................................. 5 2.3 General Description for Equipment under Test (EUT) ................................................... 5 2.4 Ancillary Equipment ...................................................................................................... 5 2.5 Technical Information ................................................................................................... 6 2.6 Antenna Location Sketch .............................................................................................. 7 3 SUMMARY OF TEST RESULT ................................................................................................. 8 3.1 Test Standards ............................................................................................................. 8 3.2 Device Category and SAR Limit ................................................................................... 9 3.3 Test Result Summary ................................................................................................. 10 3.4 Test Uncertainty ......................................................................................................... 11 4 MEASUREMENT SYSTEM ..................................................................................................... 12 4.1 Specific Absorption Rate (SAR) Definition .................................................................. 12 4.2 DASY SAR System .................................................................................................... 13 5 SYSTEM VERIFICATION ........................................................................................................ 20 5.1 Purpose of System Check .......................................................................................... 20 5.2 System Check Setup .................................................................................................. 20 6 TEST POSITION CONFIGURATIONS .................................................................................... 21 6.1 USB DONGLE TRANSMITTERS Position Conditions ................................................ 21 Report No.: Ti-EE26060254-703 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 33 Web: www.titcgroup.com Template No.: TRP-FCC DASY-Body-1 (2026-04-30) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen 7 MEASUREMENT PROCEDURE ............................................................................................. 22 7.1 Measurement Process Diagram ................................................................................. 22 7.2 SAR Scan General Requirement ................................................................................ 23 7.3 Measurement Procedure ............................................................................................ 24 7.4 Area & Zoom Scan Procedure .................................................................................... 24 8 CONDUCTED RF OUTPUT POWER ...................................................................................... 25 9 TEST RESULT ........................................................................................................................ 26 9.1 Bluetooth .................................................................................................................... 26 10 SAR Measurement Variability .................................................................................................. 27 11 SIMULTANEOUS TRANSMISSION ......................................................................................... 28 12 TEST EQUIPMENTS LIST ................................................................................…

Text truncated - open the document above for the full version.

Report No.: Ti-EE26060254-AC 1 / 33 CALIBRATION REPORT F.1 E-Field Probe (EX3DV4 - SN: 7893) Report No.: Ti-EE26060254-AC 2 / 33 Report No.: Ti-EE26060254-AC 3 / 33 Report No.: Ti-EE26060254-AC 4 / 33 Report No.: Ti-EE26060254-AC 5 / 33 Report No.: Ti-EE26060254-AC 6 / 33 Report No.: Ti-EE26060254-AC 7 / 33 Report No.: Ti-EE26060254-AC 8 / 33 Report No.: Ti-EE26060254-AC 9 / 33 Report No.: Ti-EE26060254-AC 10 / 33 Report No.: Ti-EE26060254-AC 11 / 33 Report No.: Ti-EE26060254-AC 12 / 33 Report No.: Ti-EE26060254-AC 13 / 33 Report No.: Ti-EE26060254-AC 14 / 33 Report No.: Ti-EE26060254-AC 15 / 33 Report No.: Ti-EE26060254-AC 16 / 33 Report No.: Ti-EE26060254-AC 17 / 33 Report No.: Ti-EE26060254-AC 18 / 33 Report No.: Ti-EE26060254-AC 19 / 33 Report No.: Ti-EE26060254-AC 20 / 33 Report No.: Ti-EE26060254-AC 21 / 33 Report No.: Ti-EE26060254-AC 22 / 33 Report No.: Ti-EE26060254-AC 23 / 33 Report No.: Ti-EE26060254-AC 24 / 33 F.2 Data Acquisition Electronics (DAE4 - SN:878) Report No.: Ti-EE26060254-AC 25 / 33 Report No.: Ti-EE26060254-AC 26 / 33 Report No.: Ti-EE26060254-AC 27 / 33 F.3 2450 MHz Dipole Report No.: Ti-EE26060254-AC 28 / 33 Report No.: Ti-EE26060254-AC 29 / 33 Report No.: Ti-EE26060254-AC 30 / 33 Report No.: Ti-EE26060254-AC 31 / 33 Report No.: Ti-EE26060254-AC 32 / 33 Report No.: Ti-EE26060254-AC 33 / 33 D2450V2 Dipole impedance and return loss Validation Meas. Results Current Meas. Previous Meas. Max. Deviation Meas. Data 2026.05.06 2025.05.06 / Return Loss(dB) -24.133 -27.271 -11.51% Impedance 51.716 Ω + 5.464 jΩ 51.780 Ω + 5.716 jΩ -0.252Ω (Imaginary part) --END OF REPORT--

8 CONDUCTED RF OUPUT POWER 8.1Bluetooth 8.1.1Bluetooth Output Power 8.1.2Bluetooth Duty Cycle Ti-EE26060254-AP 1/4 8.1Bluetooth 8.1.1Bluetooth Output Power Test Mode Modulati on Channel number Frequen cy(MHz) Power setting AV power (dBm) Tune up (dBm)) SAR Test BT DH5 02402713.80 14.00 Yes 392441713.72 14.00 Yes 782480713.54 14.00 Yes 2DH5 0240279.22 10.00 No 39244179.05 10.00 No 78248078.82 10.00 No 3DH5 0240279.16 10.00 No 39244179.03 10.00 No 78248078.79 10.00 No BLE-1M 02402Default5.59 6.00 No 192440Default5.48 6.00 No 392480Default5.22 6.00 No BLE-2M 12404Default5.60 6.00 Yes 192440Default5.50 6.00 No 382478Default5.28 6.00 No Ti-EE26060254-AP 2/4 8.1.2Bluetooth Duty Cycle The Bluetooth DH5 duty cycle is 76.94% as following figure, according to 2016 Oct. TCB workshop for Bluetooth SAR scaling need further consideration and the maximum duty cycle is 100%, therefore the actual duty cycle will be scaled up to 100% for Bluetooth reported SAR calculation. Duty Cycle Ti-EE26060254-AP 3/4 The Bluetooth BLE-2M duty cycle is 56.91% as following figure, according to 2016 Oct. TCB workshop for Bluetooth SAR scaling need further consideration and the maximum duty cycle is 100%, therefore the actual duty cycle will be scaled up to 100% for Bluetooth reported SAR calculation. Duty Cycle Ti-EE26060254-AP 4/4

Ti-EE26060254-ASC 1/1 Systemcheck2450MHz Date:2026-08-26 CommunicationSystemBand:D2450(2450.0MHz);Frequency:2450MHz;DutyCycle:1:1 Mediumparametersused:f=2450MHz;σ=1.769S/m;ε r =39.021;ρ=1000kg/m 3 Phantomsection:FlatSection AmbientTemperature:22.3 °C LiquidTemperature:21.6 °C DASY5Configuration: Probe:EX3DV4-7893;ConvF(7.69,7.69,7.69)@2450MHz;Calibrated:2026-07-30 Sensor-Surface:4mm(MechanicalSurfaceDetection) Electronics:DAE4Sn878;Calibrated:2026-03-23 Phantom:TwinSAMV5.0;Type:QD000P40CD;Serial:1858 MeasurementSW:DASY52,Version52.10(3);SEMCADXVersion14.6.13(7474) CW2450/AreaScan(81x81x1):Interpolatedgrid:dx=1.200mm,dy=1.200mm MaximumvalueofSAR(interpolated)=6.62W/kg CW2450/ZoomScan(7x7x7)/Cube0:Measurementgrid:dx=5mm,dy=5mm,dz=5mm ReferenceValue=58.46V/m;PowerDrift=-0.02dB PeakSAR(extrapolated)=11.3W/kg SAR(1g)=5.39W/kg;SAR(10g)=2.56W/kg Smallestdistancefrompeakstoallpoints3dBbelow=10.5mm RatioofSARatM2toSARatM1=52.6% MaximumvalueofSAR(measured)=6.35W/kg 0dB=6.35W/kg

RF Power Range (Bluetooth) Test Mode Modulatio n Channel number Frequenc y(MHz) Range(dBm) BT DH5 0240212.00 -14.00 39244112.00 -14.00 78248012.00 -14.00 2DH5 024028.00 -10.00 3924418.00 -10.00 7824808.00 -10.00 3DH5 024028.00 -10.00 3924418.00 -10.00 7824808.00 -10.00 BLE-1M 024024.00 -6.00 1924404.00 -6.00 3924804.00 -6.00 BLE-2M 124044.00 -6.00 1924404.00 -6.00 3824784.00 -6.00 Ti-EE26060254-AT 1/1

Ti-EE26060254-ATD 1/1 Meas.1BodyPlanewithHorizontal-Down5mmon78ChannelinBluetoothmode Date:2026-08-26 CommunicationSystemBand:Bluetooth;Frequency:2480MHz;DutyCycle:1:1.3 Mediumparametersused(interpolated):f=2480MHz;σ=1.813S/m;ε r =39.012;ρ=1000kg/m 3 Phantomsection:FlatSection AmbientTemperature:22.3 °C LiquidTemperature:21.6 °C DASY5Configuration: Probe:EX3DV4-7893;ConvF(7.69,7.69,7.69)@2480MHz;Calibrated:2026-07-30 Sensor-Surface:4mm(MechanicalSurfaceDetection) Electronics:DAE4Sn878;Calibrated:2026-03-23 Phantom:TwinSAMV5.0;Type:QD000P40CD;Serial:1858 MeasurementSW:DASY52,Version52.10(3);SEMCADXVersion14.6.13(7474) Ch78/AreaScan(51x51x1):Interpolatedgrid:dx=1.200mm,dy=1.200mm MaximumvalueofSAR(interpolated)=0.401W/kg Ch78/ZoomScan(7x7x7)/Cube0:Measurementgrid:dx=5mm,dy=5mm,dz=5mm ReferenceValue=11.97V/m;PowerDrift=0.02dB PeakSAR(extrapolated)=0.913W/kg SAR(1g)=0.403W/kg;SAR(10g)=0.182W/kg Smallestdistancefrompeakstoallpoints3dBbelow=9.4mm RatioofSARatM2toSARatM1=46.1% MaximumvalueofSAR(measured)=0.455W/kg 0dB=0.455W/kg

THISDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFSUNITEC ENTERPRISECO.,LTD.ANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION PAGE5OF5 0 ANTENNASPECIFICATION Client： Project： Heavys Version： Manufacturer orSupplier Address IssuedDate： Testedby Approvedb gaming-dongle V1.0 SunitecEnterpriseCo.,LTD. BuildingCNo.725,WeiXiangTaiIndustrial zone,FuChengstreet,LongHuadistrict, ShenZhen,GuangDong,China y 25-May-26 Mo lite Huang zhishun THISDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFSUNITEC ENTERPRISECO.,LTD.ANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION PAGE5OF5 1 Contents 1.RevisionHistory 2.Introduction 3.ElectricalCharacteristics THISDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFSUNITEC ENTERPRISECO.,LTD.ANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION PAGE5OF5 2 1.RevisionHistory Rev.NoIssuedDateDescriptionSummary V1.029-Feb-24initialrelease 2.Introduction 2.1IntroductionofProduct ThisproductisFPCantenna 2.2SpecificationandDimension Unit:m 3. Electrical Characteristics 3.1 Test equipment: VECTOR NETWORK ANALYZER Agilent E5071C Antenna Measurement System ETS-Lindgren Antenna Measurement System m THISDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFSUNITEC ENTERPRISECO.,LTD.ANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION PAGE5OF5 3 3.2AntennaS11parameters 3.3AntennaTestSettings: THISDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFSUNITEC ENTERPRISECO.,LTD.ANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION PAGE5OF5 4 3.42/3DRadiationPattern: 3.5AntennaData: Freq(MHz)Efficiency(dB)Efficiency(%)Gain(dB) 2400-5.3529.11-2.09 2410-5.0231.41-1.70 2420-4.8732.53-1.53 2430-4.6734.11-1.51 2440-4.4535.88-1.45 2450-4.3936.36-1.29 2460-4.2937.20-0.94 2470-4.2737.38-1.09 2480-4.3536.64-1.20 2476-4.1938.10-1.08 2463-4.2837.29-0.88 3.6ElectricalCharacteristics: AntennatypeFPCAntenna WorkingFrequencyRange2450+/-50MHz Impedance50Ω MaxEfficiency(%)38.1%@2476MHz MaxpeakGain(dBi)-0.88dBi@2463MHz

Report No.: Ti-EE26060254-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 69 Web: www.titcgroup.com Template No.: TRP-FCC 15.247 (2022-01-12) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen TEST REPORT Applicant: Heavys Inc Address: 1216 Broadway Nomadword c/o Heavys Inc, New York NY 10001, United States of America. Equipment Type: Heavys Beacon Model Name: gaming-dongle Brand Name: Heavys FCC ID: 2BAOA-BEACON Test Standard: 47 CFR Part 15 Subpart C (refer to section 3.1) Sample Arrival Date: Jun. 02, 2026 Test Date: Jun. 06, 2026 - Jun. 25, 2026 Date of Issue: Aug. 07, 2026 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Yang Wenxuan Checked by: Li Ganming Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: Ti-EE26060254-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 69 Web: www.titcgroup.com Template No.: TRP-FCC 15.247 (2022-01-12) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen Revision History Version Issue Date Revisions Rev. 01 Aug. 07, 2026 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 4 1.1 Test Laboratory ............................................................................................................ 4 1.2 Test Location ................................................................................................................ 4 2 PRODUCT INFORMATION ....................................................................................................... 5 2.1 Applicant Information .................................................................................................... 5 2.2 Manufacturer Information .............................................................................................. 5 2.3 General Description for Equipment under Test (EUT) ................................................... 5 2.4 Technical Information ................................................................................................... 6 3 SUMMARY OF TEST RESULTS ............................................................................................... 8 3.1 Test Standards ............................................................................................................. 8 3.2 Test Verdict .................................................................................................................. 8 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 9 4.1 Test Environments ........................................................................................................ 9 4.2 Test Equipment List ...................................................................................................... 9 4.3 Test Software List ......................................................................................................... 9 4.4 Measurement Uncertainty ........................................................................................... 10 4.5 Description of Test Setup ........................................................................................... 10 4.6 Measurement Results Explanation Example ............................................................... 13 5 TEST ITEMS ........................................................................................................................... 14 5.1 Antenna Requirements ............................................................................................... 14 5.2 Frequency Hopping Systems ...................................................................................... 15 5.3 Number of Hopping Frequencies ................................................................................ 17 5.4 Peak Output Power .................................................................................................... 18 5.5 Occupied Bandwidth ................................................................................................... 19 Report No.: Ti-EE26060254-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 69 Web: www.titcgroup.com Template No.: TRP-FCC 15.247 (2022-01-12) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen 5.6 Carrier Frequency Separation ..................................................................................... 20 5.7 Time of Occupancy (Dwell time) ................................................................................. 21 5.8 Conducted Spurious Emission & Authorized-band band-edge .................................... 23 5.9 Conducted Emission ................................................................................................... 24 5.10 Radiated Spurious Emission ....................................................................................... 25 5.11 Band Edge (Restricted-band band-edge) .................................................................... 30 ANNEX A TEST RESULT ........................................................................................................... 33 A.1 Number of Hopping Frequency ................................................................................... 33 A.3 Peak Output Power .................................................................................................... 34 A.4 20 dB and 99% bandwidth .......................................................................................... 38 A.5 Hopping Frequency Separation .................................................................................. 43 A.6 Average Time of Occupancy ....…

Text truncated - open the document above for the full version.