2BAOZ-CLK039PROJECTOR VIDEO CAMERA

Canal Toys USA Ltd Covered Equipment Certification Attestation Letter 6/25/2026 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2BAOZ-CLK039 Canal Toys USA Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Canal Toys USA Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Canal Toys USA Ltd (“the applicant”) certifies that the equipment for which authorization issought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity oranti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a).

Canal Toys USA Ltd * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter August 28, 2026 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2BAOZ-CLK039 Per section 2.911(d)(7) of the FCC rules, Canal Toys USA Ltd (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: Canal Toys USA Ltd Physical U.S. Company Address: 1700 West Park Drive, Suite 120 Westborough, MA 01581 USA Agent name: Gary Li Agent Email Address: [email protected] FRN: 0033588898 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed/ Designated Agent Signed: Signed: Printed name: Gary Li Title: Quality Manager Company Name: Canal Toys USA Ltd Date: August 28, 2026 FRN Code: 0033588898

Canal Toys USA Ltd August 28, 2026 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2BAOZ-CLK039 Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of 180 days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform Nemko to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☐ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Printed name: Gary Li Title: Quality Manager Company Name: Canal Toys USA Ltd

Label Label location

DEKRA Testing and Certification (Shanghai) Ltd. Guangzhou Branch Block 5, No.3, Qiyun Road, Huangpu District, Guangzhou, Guangdong, China Tel +86 20 6661 2000 Fax +86 20 6661 2001 https://www.dekra.com Report no.: RF Exposure Page 1 / 11 Test report No: RF Exposure TEST REPORT Radio Spectrum Matters (RF) Identification of item tested Projector Video Camera Trademark Canal Toys Model and /or type reference CLK 039 FCC ID 2BAOZ-CLK039 Features Input: USB Type-C for charging: DC 4.5-5.5V, 2A Battery: 7.4V 2000mAh Applicant ́s name / address Canal Toys USA Ltd. 1700 West Park Drive, Suite 120 Westborough, MA 01581 USA Test method requested, standard KDB 447498 D01V06 FCC Part 1.1310 Verdict Summary COMPLIANCE Tested by (name & signature) Jazz Liang Approved by (name & signature) Tim Yan Date of issue 2026-08-27 Report template No TRF_EMC 2017-06- FCC_Exposure DEKRA Testing and Certification (Shanghai) Ltd. Guangzhou Branch Block 5, No.3, Qiyun Road, Huangpu District, Guangzhou, Guangdong, China Tel +86 20 6661 2000 Fax +86 20 6661 2001 https://www.dekra.com Report no.: RF Exposure Page 2 / 11 INDEX page General conditions ...................................................................................................................................................... 3 Uncertainty .................................................................................................................................................................. 3 Environmental conditions............................................................................................................................................ 3 Possible test case verdicts ......................................................................................................................................... 3 Definition of symbols used in this test report .............................................................................................................. 4 Abbreviations .............................................................................................................................................................. 4 Document History ....................................................................................................................................................... 4 Remarks and Comments ............................................................................................................................................ 4 1 General Information ........................................................................................................................................... 5 1.1 General Description of the Item(s) .......................................................................................................... 5 1.2 Test data ................................................................................................................................................. 8 1.3 The environment(s) in which the EUT is intended to be used ................................................................ 8 2 Description of Test Setup .................................................................................................................................. 9 2.1 Operating mode(s) used for tests............................................................................................................ 9 2.2 Support / Auxiliary equipment / unit / software for the EUT .................................................................... 9 2.3 Test Configuration / Block diagram used for tests .................................................................................. 9 3 RF Exposure Evaluation .................................................................................................................................. 10 3.1 Limits ..................................................................................................................................................... 10 3.2 Test Procedure ...................................................................................................................................... 11 3.3 Test Result ............................................................................................................................................ 11 DEKRA Testing and Certification (Shanghai) Ltd. Guangzhou Branch Block 5, No.3, Qiyun Road, Huangpu District, Guangzhou, Guangdong, China Tel +86 20 6661 2000 Fax +86 20 6661 2001 https://www.dekra.com Report no.: RF Exposure Page 3 / 11 GENERAL CONDITIONS 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. 5. This report will not be used for social proof function in China market. UNCERTAINTY For all measurements where guidance for the calculation of the instrumentation uncertainty of a measurement is specified in EN 55016-4-2 (CISPR 16-4-2), EN/IEC 61000-4 series or a product standard, the measurement instrumentation uncertainty has been calculated and applied in accordance with these standards. Uncertainties have been calculated according to the DEKRA internal document. The reported expanded uncertainties are based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95%. ENVIRONMENTAL CONDITIONS The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Ambient temperature 15 °C – 35 °C Relative Humidity air 30% - 60% Atmospheric pre…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Shanghai) Ltd. Guangzhou Branch Block 5, No.3, Qiyun Road, Huangpu District, Guangzhou, Guangdong, China Tel +86 20 6661 2000 Fax +86 20 6661 2001 https://www.dekra.com Report no.:4959890.50 Page 1 / 92 Test report No: 4959890.50 TEST REPORT Radio Spectrum Matters (RF) Identification of item tested Projector Video Camera Trademark Canal Toys Model and /or type reference CLK 039 FCC ID 2BAOZ-CLK039 Features Input: USB Type-C for charging: DC 4.5-5.5V, 2A Battery: 7.4V 2000mAh Applicant ́s name / address Canal Toys USA Ltd. 1700 West Park Drive, Suite 120 Westborough, MA 01581 USA Test method requested, standard FCC CFR Title 47 Part15 Subpart C Section 15.247; KDB558074 D01v05r02; Verdict Summary COMPLIANCE Tested by (name & signature) Jazz Liang Approved by (name & signature) Tim Yan Date of issue 2026-08-27 Report template No TRF_EMC 2017-06- other DEKRA Testing and Certification (Shanghai) Ltd. Guangzhou Branch Block 5, No.3, Qiyun Road, Huangpu District, Guangzhou, Guangdong, China Tel +86 20 6661 2000 Fax +86 20 6661 2001 https://www.dekra.com Report no.:4959890.50 Page 2 / 92 INDEX page General conditions ...................................................................................................................................................... 3 Uncertainty .................................................................................................................................................................. 3 Environmental conditions............................................................................................................................................ 3 Possible test case verdicts ......................................................................................................................................... 3 Definition of symbols used in this test report .............................................................................................................. 4 Abbreviations .............................................................................................................................................................. 4 Document History ....................................................................................................................................................... 4 Remarks and Comments ............................................................................................................................................ 4 1 General Information ........................................................................................................................................... 5 1.1 General Description of the Item(s) .......................................................................................................... 5 1.2 Test data ................................................................................................................................................. 8 1.3 The environment(s) in which the EUT is intended to be used ................................................................ 8 2 Description of Test Setup .................................................................................................................................. 9 2.1 Operating mode(s) used for tests............................................................................................................ 9 2.2 Support / Auxiliary equipment / unit / software for the EUT .................................................................... 9 2.3 Test Configuration / Block diagram used for tests .................................................................................. 9 2.4 Measurement procedure ......................................................................................................................... 9 3 Verdict summary section ................................................................................................................................. 10 3.1 Standards .............................................................................................................................................. 10 3.2 Deviation(s) from the Standard(s) / Test Specification(s) ..................................................................... 10 3.3 Overview of results ................................................................................................................................ 11 4 Transmitter Test Results ................................................................................................................................. 12 4.1 AC Power Line Conducted Emission .................................................................................................... 12 4.2 Emissions in non-restricted frequency bands ....................................................................................... 15 4.3 Emissions in restricted frequency bands .............................................................................................. 38 4.4 Band Edge ............................................................................................................................................. 53 4.5 Duty cycle .............................................................................................................................................. 60 4.6 DTS Bandwidth ..................................................................................................................................... 64 4.7 Fundamental emission output power .................................................................................................... 77 4.8 Power spectral density .......................................................................................................................... 84 5 Identification of the Equipment Under Test ..................................................................................................... 88 Annex 1 – Measurement Uncertainty ......................…

Text truncated - open the document above for the full version.

Shenzhen Yunding Communication Electronics Co., Ltd. TEL: +86 0755-23073599 FAX: +86 0755-23097189 E-mail: [email protected] APPROVAL SHEET Approval Sheet CUSTOMERQuanjing Technology PROJECTCLK039 DESCRIPTIONFPC (YD-CLK039-2.4-5.8G) - 1.13 Cable - L105MM - Gen 1 PART NO. CUS PART NO. DATE2026-6-25 YUNDING SAMPLE APPROVAL SEAL ENGINEERING DEPARTMENTQC DEPARTMENTSALES DEPARTMENT CUSTOMER APPROVAL SEAL ENGINEERING DEPARTMENTQC DEPARTMENTPURCHASING DEPARTMENT Tel: 0755 23073599 Note: This approval sheet is made in triplicate. Please sign and stamp by your company (original text: “Approval in duplicate, please signed by your company”). Address: Room 3015, Jinchi Center, Hang Kong Road, Bao'an District, Shenzhen Shenzhen Yunding Communication Electronics Co., Ltd. TEL: +86 0755-23073599 FAX: +86 0755-23097189 E-mail: [email protected] 1. Test Items and Equipment Test ItemEquipment 1. S11 Parameters (S-parameter)1. Return Loss 2. VSWR (Voltage Standing Wave Ratio) Network Analyzer: Agilent E5071B / HP 8753D 2. Active Test1. Transmit Power (TRP) 2. Receive Sensitivity (TIS) 1. Anechoic Chamber: ETS 7x4x3 m (3D) Chamber / ETS 5x3x3 m (3D) Chamber 2. Tester: Agilent 8960 E5515B ×2 / StarPoint SP6011 Cmw500 3. Passive Test1. Antenna Gain 2. Antenna Efficiency 1. Anechoic Chamber: ETS 7x4x3 m (3D) Chamber / ETS 5x3x3 m (3D) Chamber 2. Network Analyzer: Agilent E5071B / HP 8753D Address: Room 3015, Jinchi Center, Hang Kong Road, Bao'an District, Shenzhen Shenzhen Yunding Communication Electronics Co., Ltd. TEL: +86 0755-23073599 FAX: +86 0755-23097189 E-mail: [email protected] 2. Antenna Performance SWR SWR (VSWR) measured over 2.4 GHz and 5.15–5.85 GHz bands (Agilent E5071B / HP 8753D network analyzer). Key markers: 2.400 GHz → 1.2716; 2.450 GHz → 1.2094; 2.480 GHz → 1.1682; 5.150 GHz → 2.0402; 5.300 GHz → 1.7497; 5.500 GHz → 1.5496; 5.700 GHz → 1.6253; 5.850 GHz → 1.6290. Address: Room 3015, Jinchi Center, Hang Kong Road, Bao'an District, Shenzhen Shenzhen Yunding Communication Electronics Co., Ltd. TEL: +86 0755-23073599 FAX: +86 0755-23097189 E-mail: [email protected] 3. Antenna Efficiency and Gain Passive Test for WiFi 2.4 Freq (MHz)Effi (%)Gain (dBi) 240053.350.35 241049.35-0.15 242048.48-0.37 243046.10-0.78 244046.45-0.92 245045.57-1.11 246047.59-0.98 247044.09-1.31 248045.23-1.18 249055.810.37 250056.210.41 Address: Room 3015, Jinchi Center, Hang Kong Road, Bao'an District, Shenzhen Shenzhen Yunding Communication Electronics Co., Ltd. TEL: +86 0755-23073599 FAX: +86 0755-23097189 E-mail: [email protected] 3. Antenna Efficiency and Gain (continued) Passive Test for WiFi 5.8 Freq (MHz)Effi (%)Gain (dBi) 515043.390.42 525036.38-0.57 535037.94-0.46 545036.04-0.77 555041.361.27 565038.621.30 575049.542.15 585044.471.76 Address: Room 3015, Jinchi Center, Hang Kong Road, Bao'an District, Shenzhen Shenzhen Yunding Communication Electronics Co., Ltd. TEL: +86 0755-23073599 FAX: +86 0755-23097189 E-mail: [email protected] 4. Antenna Structure Drawing Drawing notes (label translation from the original drawing): Core wire solder pointnnnnn Braid solder pointnnnnn 1.13 cable1.13n Cable length 105±3 mmnnnn 105±3 Connector: 1.13 I-PEXnnn1.13 I-PEX Product: FPC (YD-CLK039-2.4-5.8G) - 1.13 Cable - L105MM - Gen 1nnnn Address: Room 3015, Jinchi Center, Hang Kong Road, Bao'an District, Shenzhen Shenzhen Yunding Communication Electronics Co., Ltd. TEL: +86 0755-23073599 FAX: +86 0755-23097189 E-mail: [email protected] ELECTRICAL AND MECHANICAL SPECIFICATIONS Electrical Specifications ItemValue Frequency Range2400~2500 / 5150~5850 MHz VSWR≤ 2.0 Input Impedance50 Ω Maximum Gain2.15 dBi Maximum Input Power50 W Mechanical Specifications ItemValue Wire ColorBlack Input ConnectorRF Gen 1 Wire Length105 mm Working Temperature-40°C ~ +85°C Working Humidity20~80% Address: Room 3015, Jinchi Center, Hang Kong Road, Bao'an District, Shenzhen