2BAPHHL-SC-100-23Hoof Link Scanner

by Owner's Manual Important Safety Instructions BEFORE OPERATING THIS PRODUCT, CAREFULLY READ ALL PROVIDED SAFETY AND OPERATION INSTRUCTIONS. BE SURE TO KEEP THESE SAFETY AND OPERATION INSTRUCTIONS FOR FUTURE REFERENCE. ALL WARNINGS ON THE APPLIANCE AND IN THE OPERATION INSTRUCTIONS MUST BE FOLLOWED. PAY ATTENTION TO ALL WARNINGS TO ENSURE YOUR SAFETY. FOLLOW ALL PROVIDED USAGE AND OPERATION INSTRUCTIONS FOR THE PRODUCT. DO NOT SKIP ANY IMPORTANT STEPS OR PROCEDURES. DO NOT USE THIS PRODUCT NEAR WATER OR MOISTURE. ENSURE THAT THE PRODUCT IS OPERATED IN A DRY AND SAFE LOCATION. THE SCANNER IS RATED IP65 - WATER RESISTANT. USE ONLY A DRY CLOTH TO CLEAN THE PRODUCT. DO NOT USE WATER OR OTHER LIQUIDS. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES SUCH AS RADIATORS, STOVES, ETC. AND ENSURE THAT THERE IS SUFFICIENT VENTILATION TO PREVENT OVERHEATING. PROTECT THE POWER CORD TO PREVENT IT FROM BEING STEPPED ON OR PINCHED, ESPECIALLY AT THE PLUGS, OUTLETS, AND WHERE THEY EXIT THE APPLIANCE. USE ONLY ACCESSORIES SPECIFIED BY THE MANUFACTURER TO AVOID DAMAGE TO THE PRODUCT. DURING ELECTRICAL STORMS OR WHEN THE PRODUCT IS NOT IN USE FOR LONG PERIODS OF TIME, UNPLUG THE PRODUCT TO PROTECT IT. THESE ARE THE INSTRUCTIONS FOR THE USE AND MAINTENANCE OF THE PRODUCT. ALL SAFETY AND OPERATION INSTRUCTIONS MUST BE READ BEFORE OPERATING THIS PRODUCT: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. .. . . IF THE PRODUCT HAS BEEN DAMAGED IN ANY WAY, SUCH AS WHEN THE POWER CORD OR PLUG IS DAMAGED, LIQUID HAS BEEN SPILLED OR OBJECTS HAVE FALLEN INTO THE APPLIANCE, IT HAS BEEN EXPOSED TO RAIN OR MOISTURE, DOES NOT FUNCTION NORMALLY, OR HAS BEEN DROPPED AND DAMAGED, REFER ALL MAINTENANCE TO QUALIFIED SERVICE PERSONNEL. DO NOT PLACE NAKED FLAME SOURCES, SUCH AS LIT CANDLES, ON THE PRODUCT. PAY ATTENTION TO ENVIRONMENTAL ASPECTS OF BATTERY DISPOSAL. THIS PRODUCT IS DESIGNED FOR USE IN MODERATE CLIMATES. DO NOT USE IT IN EXTREME CONDITIONS. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. BATTERIES (BATTERY PACK OR INSTALLED BATTERIES) SHOULD NOT BE EXPOSED TO EXCESSIVE HEAT. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Table of Contents INTRODUCTION 01 WHAT'S IN THE BOX? 01 SOFTWARE REQUIREMENTS 01 SCANNER TUTORIAL 01 SCANNER GENERAL DESCRIPCION 03 PRODUCT SPECIFICATIONS 03 INTRODUCTION CONGRATULATIONS ON YOUR PURCHASE. THIS MANUAL CONTAINS INFORMATION ABOUT SCANNERS. WE ENCOURAGE YOU TO TAKE A FEW MINUTES TO READ THIS MANUAL, WHICH DESCRIBES THE PRODUCT AND STEP-BY-STEP INSTRUCTIONS FOR USING THE PRODUCT AND GETTING STARTED WITH IT. IT IS NECESSARY TO READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THE PRODUCT. IF YOU HAVE ANY QUESTIONS ABOUT THESE PRODUCTS, THEIR INSTALLATION OR OPERATION, PLEASE CONTACT YOUR DISTRIBUTOR OR THEIR CUSTOMER SERVICE, OR SEND A MAIL: [email protected] WHAT'S IN THE BOX? 1X HOOFLINK SCANNER 1X CABLE USB A TO USB C SOFTWARE REQUIREMENTS REQUIRES IOS 15.0 OR LATER. REQUIRES ANDROID 10.0 OR LATER. SCANNER TUTORIAL CLICK THE SCANNER’S BUTTON AND WAIT UNTIL THE SCREEN TURNS ON. YOU’LL SEE THE SCREEN DISPLAY “STANDBY”. FIRST, YOU’LL HAVE TO LINK YOUR SCANNER WITH THE HOOF LINK APP. TO DO THAT, OPEN YOUR APP, CLICK THE TOP LEFT ICON TO OPEN THE MENU AND SELECT “MY SCANNERS”. ONCE THERE, DOUBLE-CLICK THE SCANNER’S BUTTON TO ENTER TO THE LINKING MODE. A POPUP WILL APPEAR, SHOWING THE SCANNER’S ID. VERIFY THAT IT CORRESPONDS TO THE ID ON THE SCANNER’S SCREEN. CLICK “LINK”. A NEW SCREEN WILL APPEAR, WHERE YOU CAN ASSIGN A NAME TO YOUR SCANNER AND A LOCATION (E.G. A BARN). - 1 - 1X HANDLE SLEEVE NOW YOU CAN START USING IT! IN ORDER TO SCAN A CHIP, CLICK THE SCANNER’S BUTTON ONCE AND IT WILL ENTER THE “SCANNING” MODE. THEN, BRING THE SCANNER CLOSE TO THE HORSE’S LIP OR NECK. WHEN IT FINDS THE CHIP YOU WILL HEAR A BEEP NOISE, AND THE SCANNER’S SCREEN WILL SHOW “FOUND ID”. WHEN YOU SEE THIS ICON IN THE APP, IT MEANS THAT YOU NEED TO SCAN A CHIP IN ORDER TO PROCEED. TO GO FROM “SCANNING” OR “FOUND ID” BACK TO “STANDBY”, SIMPLY PRESS THE SCANNER’S BUTTON ONCE. AND TO MANUALLY EXIT1 “LINKING” MODE, PRESS THE SCANNER’S BUTTON TWICE. - 2 - SCANNER GENERAL DESCRIPCION BUTTON USB C RFID ANTENNA LCD DISPLAY SCANNER WITH CASE HANDLE SLEEVE - 3 - PRODUCT SPECIFICATIONS LCD DISPLAY RFID READER BLE ANTENNA USB C INPUT GENERAL SPECIFICATION: SCANNER DIMENSIONS (W X H X D): 113.6 X 255.69 X 28.5 MM / 4.47 X 10.06 X 1.12 IN PACKAGING DIMENSIONS (W X H X D): 138 X 269 X 38.5 MM / 5.43 X 10.59 X 1.51 IN DIMENSIONS REORIENT OR RELOCATE THE RECEIVING ANTENNA. INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER. CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS CONNECTED. CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP. FCC REGULATORY COMPLIANCE CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES: THIS DEVICE IS DESIGNED TO MEET THE REQUIREMENTS FOR EXPOSURE TO RADIO WAVES ESTABLISHED BY THE FCC. THESE REQUIREMENTS SET A SAR LIMIT OF 1.6 W/ KG AVERAGED OVER 1 GRAM OF TISSUE FOR USE ON THE BODY AND 4.0 W/KG AVERAGED OVER 10 GRAMS OF TISSU…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Tu Mundo Inc, DBA Pretty Smart Labs Address 3704 Timson Ct Austin Texas 78731 United States Grantee Code 2BAPH FCC ID 2BAPHHL-SC-100-23 Authorized Contact Name Antonio Rodriguez Chapa Contact Email [email protected] Contact Phone +1 (512) 596-7272 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made i n this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the appli cable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensur e that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements . (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Secti on 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions . Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Tu Mundo Inc, DBA Pretty Smart Labs] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Tu Mundo Inc, DBA Pretty Smart Labs] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 03/29/2023 Print Name: Antonio Rodriguez Chapa Title: CEO *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 03/29/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Tu Mundo Inc, DBA Pretty Smart Labs Company Name: Tu Mundo Inc, DBA Pretty Smart Labs Grantee Code: 2BAPH FRN: 0033592700 Contact Name: Antonio Rodriguez Chapa Contact Name: Antonio Rodriguez Chapa Address: 3704 Timson Ct Address: 3704 Timson Ct City/Province/Zip: Austin Texas 78731 United States City/Province/Zip: Austin Texas 78731 United States Telephone: +1 (512) 596-7272 Telephone: +1 (512) 596-7272 Fax: - Fax: - Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2BAPHHL-SC-100-23 ATTN: Director of Certification: We, < Tu Mundo Inc, DBA Pretty Smart Labs > understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Tu Mundo Inc, DBA Pretty Smart Labs > acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Antonio Rodriguez Chapa Name (Printed): Antonio Rodriguez Chapa Title: CEO Title: CEO Signature: Signature:

TuMundoInc.,DBAPrettySmartLabs Date:03/29/2023 TO:FederalCommunicationCommission EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MID21046 Regarding:FCCID:2BAPHHL-SC-100-23 Towhomitmayconcern: We,theundersigned,herebyauthorizeSGS-CSTCStandardsTechnicalServicesCo.,Ltd.to actonourbehalfinallmannersrelatingtoapplicationforequipmentauthorizationwithrespect totheFCCIDabove,includingsigningofalldocumentsrelatingtothesematters.Anyandall actscarriedoutbytheagentonourbehalfshallhavethesameeffectasactsofourown. We,theundersigned,herebycertifythatwearenotsubjecttoadenialoffederalbenefits,that includesFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C. 853(a). Whereouragentsignstheapplicationforcertificationonourbehalf,Iacknowledgethatall responsibilityforcomplyingwiththetermsandconditionsforCertification,asspecifiedbySGS NorthAmerica,Inc.,stillresideswithTuMundoInc,DBAPrettySmartLabs Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. Sincerely, PrintName:AntonioRodriguezChapaTitle:CEO Signature: OnbehalfofCompany:TuMundoInc,DBAPrettySmartLabs Telephone:+1(512)596-7272 E-mail:[email protected] PrettySmartLabs

TuMundoInc.,DBAPrettySmartLabs To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: 2BAPHHL-SC-100-23 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) PrettySmartLabs TuMundoInc., DBA Pretty Smart Lab s Sincerely, Print Nam e: AntonioRodriguezChapaTitle: CE O Signature: On behalfof Com pany: Tu Mundo Inc, DB A Pretty Smart Labs Telephone:+1 (512) 596-7272 E-m ail: [email protected] Pret tySm ar tLabs

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 Appendix External Photos for SZCR2303000762AT FCC ID: 2BAPHHL-SC-100-23 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5 - End of the Appendix -

2.5 in 1 in 1 in Example of scanner with label .385 in .385 in

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 5 Appendix Internal Photos for SZCR2303000762AT FCC ID: 2BAPHHL-SC-100-23 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 5 NFC ANT BT ANT SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 5 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076205 Page: 1 of 11 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2303000762AT Applicant: TuMundo Inc., DBA Pretty Smart Labs Address of Applicant: 3704 Timson Ct Austin Texas 78731 United States Equipment Under Test (EUT): EUT Name: Hoof Link Scanner Model No.: Hoof Link Scanner Trade Mark: Hoof Link Scanner FCC ID: 2BAPHHL-SC-100-23 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-03-21 Date of Evaluation: 2023-10-25 Date of Issue: 2023-10-25 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076205 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2023-10-25 Original Authorized for issue by: Winkey Wang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076205 Page: 3 of 11 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 5 Measurement and Calculation ............................................................................................................... 10 5.1 Maximum transmit power ................................................................................................................. 10 5.2 RF Exposure Calculation ................................................................................................................. 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076205 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Charging input 5Vdc via Type-C port, rechargeable battery inside: 3.7Vdc, 2000mAh Cable(s): USB cable: 1.2m, unshielded For RFID Operation Frequency: 120-150KHz Modulation Type: OOK Antenna Type: Loop antenna For BLE Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.2 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PIFA Antenna Antenna Gain: 4.0dBi Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076205 Page: 5 of 11 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076205 Page: 1 of 11 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2303000762AT Applicant: TuMundo Inc., DBA Pretty Smart Labs Address of Applicant: 3704 Timson Ct Austin Texas 78731 United States Equipment Under Test (EUT): EUT Name: Hoof Link Scanner Model No.: HL-SC-100-23 Trade Mark: Hoof Link Scanner FCC ID: 2BAPHHL-SC-100-23 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-03-21 Date of Evaluation: 2023-10-25 Date of Issue: 2023-10-25 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076205 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2023-10-25 Original Authorized for issue by: Winkey Wang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076205 Page: 3 of 11 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 5 Measurement and Calculation ............................................................................................................... 10 5.1 Maximum transmit power ................................................................................................................. 10 5.2 RF Exposure Calculation ................................................................................................................. 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076205 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Charging input 5Vdc via Type-C port, rechargeable battery inside: 3.7Vdc, 2000mAh Cable(s): USB cable: 1.2m, unshielded For RFID Operation Frequency: 120-150KHz Modulation Type: OOK Antenna Type: Loop antenna For BLE Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.2 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PIFA Antenna Antenna Gain: 4.0dBi Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076205 Page: 5 of 11 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Serv…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076202 Page: 1 of 26 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2303000762AT Applicant: TuMundo Inc., DBA Pretty Smart Labs Address of Applicant: 3704 Timson Ct Austin Texas 78731 United States Equipment Under Test (EUT): EUT Name: Hoof Link Scanner Model No.: HL-SC-100-23 Trade Mark: Hoof Link Scanner FCC ID: 2BAPHHL-SC-100-23 Standard(s) : 47 CFR Part 15, Subpart C 15.209 Date of Receipt: 2023-03-21 Date of Test: 2023-03-28 to 2023-04-21 Date of Issue: 2023-10-25 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076202 Page: 2 of 26 Revision Record Version Chapter Date Modifier Remark 01 2023-10-25 Original Authorized for issue by: Winkey Wang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076202 Page: 3 of 26 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Conducted Emissions at Mains Terminals (150kHz-30MHz) ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions (9kHz-30MHz) ANSI C63.10 (2013) Section 6.4&6.5 47 CFR Part 15, Subpart C 15.225(d) & 15.209 Pass Radiated Emissions (30MHz-1GHz) ANSI C63.10 (2013) Section 6.4&6.5 47 CFR Part 15, Subpart C 15.225(d) & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300076202 Page: 4 of 26 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information…

Text truncated - open the document above for the full version.