2BAV5LX2LaserPecker LX2

User Manual LaserPecker LX2 v1.0 01 Contents Safety Information Software download and after-sales Package List Component Introduction Buon Functions and Definitions Using the LX2 Connection Maintenance Technical Specifications Disclaimer And Warranty Terms 01 03 04 05 06 06 11 13 15 16 During normal operation, the laser is enclosed within a protective casing. The LX2 is equipped with a safety interlock system; if the cover is opened during operation, the laser will stop emiing light, ensuring that there is no harm to the user. 2 Laser Safety Regulations Safety Information Before operating this product, please read and familiarize yourself with all safety guidelines and usage steps. Users must strictly adhere to all safety precautions and ensure that the product is correctly assembled and in normal working condition. Before using the machine, check the equipment for any damage and ensure that no defective or damaged machines are used. The usage methods, specific applications, and emissions from the engraved objects must comply with local laws and regulations. The use and maintenance of this device should follow the instructions in the manual to ensure safe operation. This device should not be operated by individuals with physical, sensory, or intellectual disabilities, minors, or untrained personnel. Ensure that the equipment is placed on a stable and level surface for operation. Keep the area around the device dry, well-ventilated, and maintain the environment within 50-95°F (10-35°C) and 10-95% humidity. Operating the device at sub-zero temperatures is strictly prohibited. When this product is in operation, ensure that it is supervised. Please stop using the device immediately and disconnect the power in the following situations: A burnt smell is detected coming from the device. Open flames or sparks are observed coming from the engraving material. Any part of the device is damaged or malfunctioning. The device suddenly stops operating without any apparent reason. There are unusual sounds, smoke, or abnormal lights coming from the device. 1 General Safety · · · · · · · · · · · · · 02 3 Equipment Safety Please ensure that the power adapter specifications indicated in the main unit's user manual are followed for powering the device. Using an adapter with di˜erent power ratings may cause the device to malfunction. · · · · · · · · · · · · · 4 Safety Labels Warning and instruction labels for the LaserPecker laser protective enclosure are placed in areas that may pose hazards during operation or before use. If any labels are damaged or missing, please replace them immediately. You can use the following template to copy and print the required labels. It is strictly prohibited to operate the device with any parts disassembled. The absence of any components can pose a laser safety risk and damage the equipment. Do not tamper with the safety mechanisms of the cover. Operating lasers or reflecting laser beams can quickly lead to fires, burns, and permanent vision damage. Normally, the laser is shielded by a protective cover or safety enclosure. If the target object cannot be fully covered, such as when using feeding accessories, safety goggles must be worn to protect the eyes from laser exposure. Before operating the equipment, users should be thoroughly knowledgeable about the following aspects: the physical characteristics of laser radiation, the hazard classification of lasers and related health e˜ects, and safety measures. Never operate the laser unaended. During operation, closely monitor the device to ensure it is functioning normally. Do not engrave or cut materials that contain PVC or vinyl. During operation, these materials may release toxic or harmful gases or fumes. Depending on the type and composition of the engraving/cuing materials, these emissions may pose health and environmental risks. To ensure safe use, it is advisable to fully understand the material properties before processing; do not engrave or cut any unknown materials. LaserPecker is not responsible for any damage to the machine or injury to persons caused by engraving materials containing PVC, vinyl, or materials with unknown properties. Do not use this device in humid, dusty, or high electromagnetic interference environments. Under these conditions, the laser may easily deflect or reflect. Reflective materials can cause laser reflections, so ensure that the work area is free from any reflective surfaces. Do not ignite explosive materials or any substances that may increase the risk of fire near the device (especially flammable materials such as paper, acetone, gasoline, alcohol, or volatile solvents). Do not place any objects on top of the device, particularly heavy items, to prevent permanent damage. When operating the device, ensure good ventilation to expel exhaust gases outdoors, or use it in conjunction with an air purification filtration system. If symptoms such as respiratory irritation occur, immediately get fresh air and seek medical aention as needed. Keep the interior of the device clean to prevent the accumulation of cuing or engraving debris, which could lead to fires. After use, promptly clean any residual materials from the tray. Have a fire extinguisher ready and conduct regular maintenance checks on it. If open flames occur during processing, take the following measures: 1)First, disconnect the power supply to the device. (2)Then, use the fire extinguisher to put out the fire. 03 If you encounter any issues, please do not hesitate to reach out to our customer support team at [email protected] YouTube: @LaserPecker Contact Us Facebook Group: @LP5 O˜icial Group Software Download After-Sales Service Scan the QR code below to download and install the LaserPecker Design Space App. Download App Download PC Software Please visit hps://www.laserpecker.net/pages/software to download the PC software. LaserPecker Design Space Please follow the operation guide and read the warnings and precautions in t…

Text truncated - open the document above for the full version.

AOGES CO., LIMITED 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Hingin Technology Co.Ltd. Address: Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Product Name: LaserPecker LX2 FCC ID: 2BAV5LX2 Model(s): LX2 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Hingin Technology Co.Ltd.] (“the applicant”) designate [AOGES CO., LIMITED] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: AOGES CO., LIMITED USA Address: 1624 Market St, Ste 226, #30327 Denver CO, 80202 USA FRN Number: 0033947847 Contact Name: XIAOYAN LAl Telephone No: +1 303 623 1940 Email: [email protected] Applicant Company name: Shenzhen Hingin Technology Co.Ltd. Address: Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Grantee FRN Number: 0033668633 FCC Grantee Code: 2BAV5 Contact Name: Changjian Zhao Telephone No: +86-15622878781 Email: [email protected] AOGES CO., LIMITED 2.911 (d)(7)USA Agent v1.5 Signature: Title: CEO Signature: Title: Manager Date: 2024.12.31 Date:2024.12.31 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Shenzhen Hingin Technology Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Hingin Technology Co.Ltd. Address: Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Product Name: LaserPecker LX2 FCC ID: 2BAV5LX2 Model(s): LX2 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Hingin Technology Co., Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Changjian Zhao Date: 2024.12.31 Title and Company name: Manager / Shenzhen Hingin Technology Co.Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Hingin Technology Co.Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Hingin Technology Co.Ltd. Address: Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Product Name: LaserPecker LX2 FCC ID: 2BAV5LX2 Model(s): LX2 2.911(d)(5)(i) Equipment Type We, [Shenzhen Hingin Technology Co.Ltd.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Changjian Zhao Date: 2024.12.31 Title and Company name: Manager / Shenzhen Hingin Technology Co.Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Hingin Technology Co.Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024/12/31 Subject; Request for Confidentiality FCC ID: 2BAV5LX2 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Changjian Zhao Title: Manager

Shenzhen Hingin Technology Co.Ltd Agent Authorization Company: Shenzhen Hingin Technology Co.Ltd Address: Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Product Name: LaserPecker LX2 Model Number(s): LX2 Product Description: LaserPecker LX2 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2024-12-31 Name: Changjian Zhao Title: Manager Company: Shenzhen Hingin Technology Co.Ltd

Page 1 of 5 Report No.: STS2411218 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Page 2 of 5 Report No.: STS2411218 Photo 3 Photo 4 Page 3 of 5 Report No.: STS2411218 Photo 5 Photo 6 Page 4 of 5 Report No.: STS2411218 Photo 7 Photo 8 Page 5 of 5 Report No.: STS2411218 Photo 9

FCC Label LaserPecker LX2 Model name: LX2 FCC ID: 2BAV5LX2 IC: 29902-L2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Page 1 of 10 Report No.: STS2411218 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Page 2 of 10 Report No.: STS2411218 Photo 3 Photo 4 TX Antenna Page 3 of 10 Report No.: STS2411218 Photo 5 Photo 6 Page 4 of 10 Report No.: STS2411218 Photo 7 Photo 8 Page 5 of 10 Report No.: STS2411218 Photo 9 Photo 10 Page 6 of 10 Report No.: STS2411218 Photo 11 Photo 12 Page 7 of 10 Report No.: STS2411218 Photo 13 Photo 14 Page 8 of 10 Report No.: STS2411218 Photo 15 Photo 16 Page 9 of 10 Report No.: STS2411218 Photo 17 Photo 18 Page 10 of 10 Report No.: STS2411218 Photo 19 Photo 20

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. MPE Report Report No.:STS2411218H02 Issued for Shenzhen Hingin Technology Co.Ltd Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Product Name: LaserPecker LX2 Brand Name: LaserPecker Model Name: LX2 Series Model(s): N/A FCC ID: 2BAV5LX2 Test Standards: FCC 47CFR §2.1091 Page 2 of 10 Report No.:STS2411218H02 TEST REPORT Applicant’s Name ................. : Shenzhen Hingin Technology Co.Ltd Address ................................. : Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Manufacturer's Name ........... : Shenzhen Hingin Technology Co.Ltd Address ................................. : Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Product Description Product Name ........................ : LaserPecker LX2 Brand ................................... : LaserPecker Model Number ....................... : .. : LX2 Series Model(s) ...................... : N/A Standards ............................. : FCC 47CFR §2.1091 447498 D04 Interim General RF Exposure Guidance v01 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 29 Nov. 2024 Date (s) of performance of tests ............. : 29 Nov. 2024 ~ 10 Dec. 2024 Date of Issue .......................................... : 10 Dec. 2024 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Tony Liu) Authorized Signatory : (Bovey Yang) Page 3 of 10 Report No.:STS2411218H02 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 6 2. FCC 47CFR §2.1091 REQUIREMENT 7 2.1 TEST STANDARDS 7 2.2 LIMIT 7 2.3 TEST RESULT 10 Page 4 of 10 Report No.:STS2411218H02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 10 Dec. 2024 STS2411218H02 ALL Initial Issue Page 5 of 10 Report No.:STS2411218H02 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name LaserPecker LX2 Brand LaserPecker Model Name LX2 Series Model(s) N/A Model Difference N/A Product Description The EUT is LaserPecker LX2 Operation Frequency: BT:2402 – 2480 MHz 2.4G WLAN: 802.11b/g/n/ax(20MHz): 2412~2472MHz 802.11n/ax(40MHz):2422~2462MHz Modulation Type: BR(1Mbps): GFSK BT EDR(2Mbps): π/4-DQPSK BT EDR(3Mbps): 8DPSK 2.4G WLAN: 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM Antenna gain: 4.6dBi Antenna Designation: Dipole Power Rating N/A Adapter Input: 100-240V~ 50/60Hz 2.5Amax Output: DC 24V 10A 240W Battery N/A Hardware Version LX2-V1.0 Software Version V5.5.0 Page 6 of 10 Report No.:STS2411218H02 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 7 of 10 Report No.:STS2411218H02 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Page 8 of 10 Report No.:STS2411218H02 (C) Or using below table and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). RF Source frequency (MHz) Threshold ERP(watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . Page 9 of 10 Report No.:STS2411218H02 For multiple RF sources: Multiple RF sources are exempt if: (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating …

Text truncated - open the document above for the full version.

ANT TypeDipole Antenna appearance

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2411218W03 Issued for Shenzhen Hingin Technology Co.Ltd Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Product Name: LaserPecker LX2 Brand Name: LaserPecker Model Name: LX2 Series Model(s): N/A FCC ID: 2BAV5LX2 Test Standards: FCC Part15.247 S T L A B S Page 2 of 87 Report No.: STS2411218W03 TEST REPORT Applicant’s Name ................. : Shenzhen Hingin Technology Co.Ltd Address ................................. : Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Manufacturer's Name ........... : Shenzhen Hingin Technology Co.Ltd Address ................................. : Room 4001, West Tower of Galaxy Twin Towers, No. 8 Yaxing Road, Longgang District, Shenzhen, Guangdong, China, 518000 Product Description Product Name ........................ : LaserPecker LX2 Brand Name ........................... : LaserPecker Model Name .......................... : .. : LX2 Series Model(s) .................... : N/A Test Standards ..................... : FCC Part 15.247 Test Procedure........................: ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 29 Nov. 2024 Date (s) of performance of tests ............. : 29 Nov. 2024 ~ 10 Dec. 2024 Date of Issue .......................................... : 10 Dec. 2024 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Tony Liu) Authorized Signatory : (Bovey Yang) Page 3 of 87 Report No.: STS2411218W03 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 12 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 13 3. EMC EMISSION TEST 14 3.1 CONDUCTED EMISSION MEASUREMENT 14 3.2 RADIATED EMISSION MEASUREMENT 18 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 30 4.1 LIMIT 30 4.2 TEST PROCEDURE 30 4.3 DEVIATION FROM STANDARD 30 4.4 TEST SETUP 30 4.5 EUT OPERATION CONDITIONS 30 4.6 TEST RESULTS 30 5. POWER SPECTRAL DENSITY TEST 31 5.1 LIMIT 31 5.2 TEST PROCEDURE 31 5.3 DEVIATION FROM STANDARD 31 5.4 TEST SETUP 31 5.5 EUT OPERATION CONDITIONS 31 5.6 TEST RESULTS 31 6. BANDWIDTH TEST 32 6.1 LIMIT 32 6.2 TEST PROCEDURE 32 6.3 DEVIATION FROM STANDARD 32 6.4 TEST SETUP 32 6.5 EUT OPERATION CONDITIONS 32 Page 4 of 87 Report No.: STS2411218W03 Table of Contents Page 6.6 TEST RESULTS 32 7. PEAK OUTPUT POWER TEST 33 7.1 LIMIT 33 7.2 TEST PROCEDURE 33 7.3 DEVIATION FROM STANDARD 33 7.4 TEST SETUP 34 7.5 EUT OPERATION CONDITIONS 34 7.6 TEST RESULTS 34 8. ANTENNA REQUIREMENT 35 8.1 STANDARD REQUIREMENT 35 8.2 EUT ANTENNA 35 APPENDIX 1-TEST DATA 36 1. DUTY CYCLE 36 2. MAXIMUM AVERAGE CONDUCTED OUTPUT POWER 43 3. MAXIMUM PEAK CONDUCTED OUTPUT POWER 50 4. -6DB BANDWIDTH 51 5. MAXIMUM POWER SPECTRAL DENSITY LEVEL 58 6. BAND EDGE 65 7. CONDUCTED RF SPURIOUS EMISSION 74 APPENDIX 2-PHOTOS OF TEST SETUP 87 Page 5 of 87 Report No.: STS2411218W03 Revision History Rev. Issue Date Report No. Effect Page Contents 00 10 Dec. 2024 STS2411218W03 ALL Initial Issue Page 6 of 87 Report No.: STS2411218W03 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/ part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 87 Report No.: STS2411218W03 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.755dB 2 Unwanted Emissions, conducted ±2.874dB 3 All emissions, radiated 9K-30MHz ±3.80dB 4 All emissions, radiated 30M-1GHz ±4.18dB 5 All emissions, radiated 1G-6GHz ±4.90dB 6 All emissions, radiated>6G ±5.24dB 7 Conducted Emission (9KHz-150KHz) ±2.19dB 8 Conducted Emission (150KHz-30MHz) ±2.53dB 9 Occupied Channel Bandwidth ±3.5% 10 Power Spectral Density, conducted ±1.245dB 11 Duty Cycle ±3.2% Page 8 of 87 Report No.: STS2411218W03 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name LaserPecker LX2 Brand Name LaserPecker Model Name LX2 Ser…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2BAV5LX2 Setup photo conduction RE (Below 1GHz) Page 2 of 2 FCC ID: 2BAV5LX2 RE (Above 1GHz)