Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|
| 3 | 15C | 2.42 GHz - 2.45 GHz | 21.60 mW |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesPower Output listed is conducted. Single Modular Approval. Device is an 802.11b/g/n/ax device enabled for 2.4 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.25 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.This device supports 20MHz and 40MHz bandwidth modes.
