2BAX3PRFPUREONE3PureOne 3.0

SuperCom Confidential Information PureOne Monitoring Page 1 of 19 PUREONE ELECTRONIC MONITORING SOLUTION User’s Guide The information in this document is confidential to the person to whom it is addressed and should not be disclosed to any other person. It may not be reproduced in whole, or in part, nor may any of the information contained therein be disclosed without the prior consent of SuperCom Ltd. (‘the Company’). A recipient may not solicit, directly or indirectly (whether through an agent or otherwise) the participation of another institution or person without the prior approval of the directors of the Company. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and or publication of this material is strictly prohibited. © All rights reserved. SuperCom Ltd. 2022 SuperCom Confidential Information PureOne Monitoring Page 2 of 19 1 PureOne Monitoring P u r e O n e mo n i t o r i n g so l u t i o n ov e r v i e w The PureOne is an all-in-one device, containing GNSS, cellular and RF BLE modules. The integrated BLE module allows the device to communicate with the PureBeacon (home unit) Bluetooth device while the GNSS module is used for location positioning using satellites. The built in LTE cellular module is used for communication with PureMonitor. The PureOne device comes with a portable charger, that allows seamless and convenient charging. Both the charger and the PureOne device are equipped with LED interface that indicates the different states and modes of the devices. T u r n i n g t h e P u r e O n e on To turn on the PureOne, simply connect the charger to the device. Once the device detects that the charger is attached, the PureOne will automatically be turned on. A l l o c a t i o n o f t h e P u r e O n e & t h e P u r e B e a c o n de v i c es i n P u r e M o n i t o r Once offender profile was created in the system the device can be assigned to it. The allocation of the device is done via PureMonitor, in the following steps: 1. On the Offender’s Equipment Tab, click Allocate Device 2. Search for the PureOne serial number or select the PureOne from the list of devices then click Allocate 3. If a PureBeacon device is needed repeat step 2 i.e. select a PureBeacon home unit by serial number and click Allocate 4. The PureOne and PureBeacon devices are now added to the Offender’s Equipment list and is ready for activation. SuperCom Confidential Information PureOne Monitoring Page 3 of 19 Monitoring devices are allocated to an offender and ready for activation. M o n i t o r i n g s t a r t ( ac t i v a t i o n) i n P u r e M o n i t o r Once the monitoring device/s are allocated the main device can be activated in order to enroll and start monitoring. Click “Activate” button colored in green to send activation request to the PureOne. Once clicked, the information section soon will become available and device’s status and recent events will be displayed. SuperCom Confidential Information PureOne Monitoring Page 4 of 19 M o n i t o r i n g end ( u n a l l o c a t i o n ) i n P u r e M o n i t o r To finish the monitoring devices needs to be removed from offender in PureMonitor. The unallocation of the device/s is done in the following steps: 1. If the offender has any PureBeacon(s) allocated to them, the device must be unallocated from the offender prior to the unallocation of the PureOne device. 2. A device can be unallocated by going to the Offender’s Equipment Tab, clicking on a device’s Settings button and then clicking on the red Unallocate button: 3. Once the device confirms the unallocation request was received it will be removed from the offender and will not appear under their Equipment tab. SuperCom Confidential Information PureOne and PureBeacon Installation Page 5 of 19 2 PureOne and PureBeacon Installation P a r t s of P u r e O n e i n s t a l l a t i o n k it The kit of the PureOne includes the following items: PureBeacon device (optional) PureOne device SuperCom Confidential Information PureOne and PureBeacon Installation Page 6 of 19 Portable PureOne charger PureOne strap Upper strap buckle (disposable) SuperCom Confidential Information PureOne and PureBeacon Installation Page 7 of 19 Bottom strap buckle (disposable) Locking clip (disposable) SuperCom Confidential Information PureOne and PureBeacon Installation Page 8 of 19 Strap cutting tool for strap length adjustment Medical scissors for strap cutting and PureOne bracelet removal P u r e O n e I n s t a l l a t i o n The kit of SuperCom Confidential Information PureOne and PureBeacon Installation Page 9 of 19 1. Prepare: a. PureOne device b. The upper and bottom strap locks c. Locking pin d. Strap 2. Attach the upper and lower strap buckles to one end of the ankle bracelet strap. 3. Fit the disposable locking clip into one end of the main body. 4. Fit the end of the strap into the end of the main body and push until the strap clicks in place. SuperCom Confidential Information PureOne and PureBeacon Installation Page 10 of 19 5. Measure the strap on the offender’s ankle. The strap should be snug, but still have some looseness so it does not hurt the ankle. The correct strap tightness should be loose enough that you can fit an index finger between the Strap and the ankle. Measuring the band on the ankle 6. Use numbering on the strap to select and remember the suitable length of the band. SuperCom Confidential Information PureOne and PureBeacon Installation Page 11 of 19 Selecting a number on the band 7. Use the provided cutter to cleanly cut the band. Cutting the strap to required length using the provided cutter. 8. Verify strap length by attaching the strap to offender’s ankle. SuperCom Confidential Information PureOne and PureBeacon Installation Page 12 of 19 Rechecking measurement 9. If the strap fits: a. Attach the upper and lower strap buckles to the 2 nd end of the ankle bracelet strap. b. Insert the locking pin in the side of the PureOne body. SuperCom Confidential Info…

Text truncated - open the document above for the full version.

SuperCom - PureOne Device Analysis and Design of Cellular/BLE Duty Cycle Contents Purpose ................................................................................................................................................... 2 Device details .......................................................................................................................................... 2 Device Tx Data Analysis ........................................................................................................................... 3 Cellular Data Tx Flow ............................................................................................................................... 3 Data payload analysis: ......................................................................................................................... 3 Standard Active Transmission Time .................................................................................................... 4 Description of reasonable and infrequent cases - Cellular ..................................................................... 4 Bluetooth duty cycle analysis .................................................................................................................. 5 Standard Active Transmission Time .................................................................................................... 5 Description of reasonable and infrequent cases ................................................................................ 5 System design to protect from duty cycle alterations. ........................................................................... 6 Standard design............................................................................................................................... 6 Design to meet and keep requirements: ........................................................................................ 6 Purpose - Analyze and demonstrate the cellular and BLE Tx duty factor. - Describe all reasonable and infrequent use cases. - Show how the design inherently provides protection from alterations of the maximum duty factor that was considered for compliance purposes. Device details Product: PureOne Manufacturer: SuperCom LTD Model: PureOne Hardware Version: 3.0 FCC ID: 2BAX3PRFPUREONE3 Device Tx Data Analysis Cellular Data Tx Flow - Communication interval o Infrequent: every 60 minutes, usually when at home. o Frequent: every 10 minutes, usually when outside home. - Communication session flow: o Authentication and security o Data exchange o Session termination Data payload analysis: Data payload is up to 2060 bytes per session, according to the following analysis: o Authentication and security – 600 bytes ▪ TLS/SSL negotiation: 200 bytes ▪ HTTP headers and structure: 180 bytes ▪ Protocol overhead data: 100 bytes ▪ Authentication net payload: 120 bytes o Data exchange – 1100 bytes ▪ Security overhead – 80 bytes ▪ HTTP headers and structure: 180 bytes ▪ Other overhead data: 100 bytes ▪ Data items size: 640 byes • Single data item size: 32 bytes • Protocol overhead data: 32 bytes • Number of data items: 10 o Session termination– 360 bytes ▪ Security overhead – 80 bytes ▪ HTTP headers and structure: 180 bytes ▪ Protocol overhead data: 40 bytes ▪ Termination net payload: 60 bytes Standard Active Transmission Time BLE Tx schematics - 2060 bytes payload in bits o 2060 X 8 = 16,480 - Data rate: assuming 5 Mbps (using LTE network connection) - Calculation: o 16,480 / 5 = 3.296 milliseconds The active transmission time is a time slot of 10 minutes is 3.296 milliseconds. Duty Cycle = (3.296 milliseconds / 600,000 milliseconds) * 100 = 0.05493% The standard typical duty cycle is: 0.05493% Description of reasonable and infrequent cases - Cellular There are 3 use cases: 1. Standard reporting. a. Device is active, not at home, communications is every 10 minutes. b. Duty cycle is 0.05493% 2. Infrequent reporting. a. Device is active, at home or static position/location, communications is every 60 minutes. b. Duty cycle is 0.00915% 3. Alarm reporting. a. A special case where a single alarm/data should be immediately sent. b. Maximum allowed alarms per day: 20 alarms Duty cycle at worst case scenario: Assumptions: - Standard reporting mode is active all the time. o Communication is every 10 minutes. o Payload per session: 2060 bytes o Daily payload: ▪ 1440 minutes / 10 minutes X 2060 bytes ▪ Daily payload: 296,640 bytes - Device is triggering 20 alarms per day. o Each alarm payload: 2060 bytes o Daily alarms payload: 2060 * 20 = 41,200 bytes - Total daily payload: 296,640 + 41,200 = 337,840 bytes Daily Payload in bits: 337,840 * 8 = 2,702,720 bits Tx time, assuming data rate of 5Mbps: 2,702,720 / 5 = 540,544 milliseconds Daily Duty Cycle = (540,544 milliseconds / 86,400,000 daily milliseconds) * 100 = 0.6267% The maximum daily Tx duty cycle is 0.6267%. Bluetooth duty cycle analysis The PureOne device uses a “Bluetooth low energy” certified module. The device is set up to transmit status data every 5 seconds. The protocol is “Advertising” (broadcast) under GAP profile. Protocol characteristics: - Data rate: 1 Mbps - Interval: 5 seconds - Channels: All 3 channels used (channels: 37,38,39) - Payload: 39 bytes Standard Active Transmission Time Payload in bits: 39 (bytes) * 8 = 312 bits Daily packets: 86400 / 5 = 17,280 All 3 BLE channels: 17,280 * 3 = 51,840 51,880 / 1 (Mbps) = 51.88 milliseconds Duty cycle: 51.88 / 86,400,000 = 0.00006 % The BLE duty cycle is 0.00006 % Description of reasonable and infrequent cases The BLE advertising protocol uses a random time before/after each 5 seconds Tx interval. The average of 5 seconds interval is still being kept. System design to protect from duty cycle alterations. Standard design The PureOne device is a hardware-based device. The hardware was designed, reviewed, implemented, and manufactured using standard design tool and by professional engineers. During manufacturing, e…

Text truncated - open the document above for the full version.

Covered list attestation FCC application letter Kiwa Page 1 of 2 RF_755_02 15-02-2023 [PLACE COMPANY LOGO HERE OR PUT ON COMPANY LETTERHEAD] Certification Application Attestation Statements SuperCom LTD 3 Rothschild St 6688106 Tel Aviv, Israel Subject: FCC ID: 2BAX3PRFPUREONE3 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) SuperCom LTD certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) SuperCom LTD (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 08-May-2023 City: Tel Aviv Name (2) : Boaz Polak Function: Laboratory Supervisor Telephone number: +972524043471 Email address: [email protected] Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” Covered list attestation FCC application letter Kiwa Page 2 of 2 RF_755_02 15-02-2023 [PLACE COMPANY LOGO HERE OR PUT ON COMPANY LETTERHEAD] Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 07-02-20231 st version RvM 02 1 15-02-2023Changed Applicant to Company and added “Subject: FCC ID: “ RvdM Issued/modified by : Richard van de Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : __-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : __-02-2023

Agent letter FCC attestation statement Kiwa Page 1 of 2 RF_753, Issue 2 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company name: SuperCom FRN: 0033737347 Contact person name: Anthony Thompson Street address: Franklin Street, Suite 310 ZIP/City/State Oakland, CA, 94607 Telephone number: 859-303-9640 Email address: [email protected] Signature: Date: This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commissionrelated proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: SuperCom LTD Grantee Code: 2BAX3 Contact person name: Boaz Polak Street address: Rothschild 3 ZIP/City/State Tel Aviv, 6688106, IL Telephone number: +972524043471 Email address: [email protected] 5 /1/ 2023 Signature: Date: 15.05.2023 Agent letter FCC attestation statement Kiwa Page 2 of 2 RF_753, Issue 2 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvdM 02 1 15-05-2023 Added FRN to Agent details RvdM Issued/modified by : Richard van der Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : __-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : __-02-2023

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: SuperCom LTD Address: Rothschild 3 City: Tel Aviv Country: Israel To: Telefication B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: 2BAX3PRFPUREONE3 Reference number: 49200 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: in order to avoid exposed of the technology to the competitors Date: May 30, 2023 Name and signature of applicant: Mr. Boaz Polak Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 (On manufacturer’s company letter heading) Declaration of Authorization We Name: SuperCom LTD Address: Rothschild 3 City: Tel Aviv 6688106 Country: Israel Declare that: Name Representative of agent: (1) Agent Company name: Hermon Laboratories Ltd. Address: Harakevet Industrial Zone City: Binyamina 30500 Country Israel is authorized to apply for Certification of the following product(s): Product description: PureOne 3.0 Type designation: PRF-PUREONE3.0 Trademark: SuperCom LTD Validity/ expiry date May 30, 2024 on our behalf. Date: May 30, 2023 City: Tel Aviv Name: Boaz Polak (2) Function: Laboratory Supervisor Signature:  . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent. Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 02 1 02-01-2023 History sheet added AG Issued/modified by : Axel Gase Function : Quality Manager Revision : 02 Date : 02-01-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 02-01-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 02-01-2023

FCC ID: 2BAX3PRFPUREONE3 IC: 22778-PRFPUREONE3

FCC ID: 2BAX3PRFPUREONE3 IC: 22778-PRFPUREONE3

FCC ID: 2BAX3PRFPUREONE3 IC: 22778-PRFPUREONE3 FCC ID: 2BAX3PRFPUREONE3 IC: 22778-PRFPUREONE3 FCC ID: 2BAX3PRFPUREONE3 IC: 22778-PRFPUREONE3

Proj. nr: 0490, 502, 561 & 582 Rel.:r3 TECHNICAL NOTE Date: 28.09.20 Author: Alfred Firouz Filename: LE910Cx_TX_Tune_Up _Form_r3 Title: Power Tune up procedure for LE920 Products Family Page 1 of 5 Code: MOD. 59 10/06 Rev.5 CONFIDENTIAL Documentazione riservata. Qu esto documento non può essere riprodotto, anche parzialmente, né reso noto a terzi senza preventiva autorizzazione scritta di Telit Communications S.p.A. Tutti i diritti sono tutelati a norma di legge. Restricted document. No part of this document can be reproduced or copied in any format, in part or totally, nor its contents revealed in any manner to others without the express written permission of Te lit Communications S.p.A. All rights reserved. Title: Power Tune up procedure for LE910Cx Products Family Contents 1 INTRODUCTION............................................................................................................................................. 2 1.1 SCOPE ......................................................................................................................................................... 2 1.2 APPLICABILITY .............................................................................................................................................. 2 2 RF POWER STRUCTURE AND FUNCTION ................................................................................................. 2 2.1 LTE TX TUNE UP ......................................................................................................................................... 2 2.1.1 Range of operating RF Power for LTE .............................................................................................. 2 2.2 WCDMA TX TUNE UP .................................................................................................................................. 4 2.2.2 WCDMA composite Tx/Rx vs frequency calibration procedure .................................................... 4 2.2.3 Tx Limiting & Freq Compensation...................................................................................................... 4 2.2.4 Range of operating RF Power for WCDMA ....................................................................................... 4 2.3 GSM TX TUNE UP ........................................................................................................................................ 5 2.3.1 Polar calibration ................................................................................................................................. 5 2.3.2 Timing delay calibration ..................................................................................................................... 5 2.3.3 Range of operating RF Power for GSM ............................................................................................. 5 Proj. nr: 0490, 502, 561 & 582 Rel.:r3 TECHNICAL NOTE Date: 28.09.20 Author: Alfred Firouz Filename: LE910Cx_TX_Tune_Up _Form_r3 Title: Power Tune up procedure for LE920 Products Family Page 2 of 5 Code: MOD. 59 10/06 Rev.5 CONFIDENTIAL Documentazione riservata. Qu esto documento non può essere riprodotto, anche parzialmente, né reso noto a terzi senza preventiva autorizzazione scritta di Telit Communications S.p.A. Tutti i diritti sono tutelati a norma di legge. Restricted document. No part of this document can be reproduced or copied in any format, in part or totally, nor its contents revealed in any manner to others without the express written permission of Te lit Communications S.p.A. All rights reserved. 1 Introduction 1.1 Scope The aim of this document is the description of Tune Up Procedure for the LE910Cx Products family. 1.2 Applicability This Technical Note is related to the following products: N/A Product Supported 2G Bands Supported 3G bands Supported LTE bands 2 RF power structure and function 2.1 LTE TX Tune Up LTE Tx tune up is being done with QCOMM tool and performed within two steps: • Tx linearization & Freq compensation. • Tx Limiting & Freq Compensation 2.1.1 Tx linearization The unit transmits in a reference channel (mid) and perform TX sweep on 38-77 & 10-68 AGC values in 2 PA gain states (1, 0) Looking for the max & min power at each PA state using the best HDET value. After completing calibration on the reference channel frequency compensation being done on 3 channels across the band for the 2 gain states (1, 0). 2.1.2 Tx Limiting and Freq Compensation. The unit transmits in a reference channel searching for the correct bias & HDET values in order to limit the max power for the 2 gain states. Once the values are set compensation for all 3 channels in 2 PA states is being done. 2.1.1 Range of operating RF Power for LTE The LE910Cx families supports 14 LTE Bands The nominal power levels and tolerances for the LTE bands are indicated in the following table: Proj. nr: 0490, 502, 561 & 582 Rel.:r3 TECHNICAL NOTE Date: 28.09.20 Author: Alfred Firouz Filename: LE910Cx_TX_Tune_Up _Form_r3 Title: Power Tune up procedure for LE920 Products Family Page 3 of 5 Code: MOD. 59 10/06 Rev.5 CONFIDENTIAL Documentazione riservata. Qu esto documento non può essere riprodotto, anche parzialmente, né reso noto a terzi senza preventiva autorizzazione scritta di Telit Communications S.p.A. Tutti i diritti sono tutelati a norma di legge. Restricted document. No part of this document can be reproduced or copied in any format, in part or totally, nor its contents revealed in any manner to others without the express written permission of Te lit Communications S.p.A. All rights reserved. LTE Band Max Output Power Tolerances (dB) # dBm - + 1 23 2 2 2 23 2 2 3 23 2 2 4 23 2 2 5 23 2 2 7 23 2 2 8 23 2 2 12 23 2 2 20 23 2 2 25 23 2 2 26 23 2 2 28A/28 23 2 2 66 23 2 2 71 23 2 2 Proj. nr: 0490, 502, 561 & 582 Rel.:r3 TECHNICAL NOTE Date: 28.09.20 Author: Alfred Firouz Filename: LE910Cx_TX_Tune_Up _Form_r3 Title: Power Tune up procedure for LE920 Products Family Page 4 of 5 Code: MOD. 59 10/06 Rev.…

Text truncated - open the document above for the full version.

1 (7) Copyright ©Verkotan Document ID: FCC RF Exposure Evaluation Report_PureOne_ID6166_18052023.docx RF Exposure Evaluation Report Date of Report 18/05/2023 Client’s Contact person: Ido Rosenfeld Number of pages: 7 Responsible Test engineer: Ilari Kinnunen Testing laboratory: Verkotan Oy Elektroniikkatie 17 90590 Oulu Finland Client: SuperCom LTD 3, Rothschild Blvd. Tel Aviv 6688106 Israel Tested devices PureOne Related reports: - Testing has been carried out in accordance with: 47CFR §2.1093 Radiofrequency Radiation Exposure Evaluation: Portable Devices FCC published RF exposure KDB procedures Documentation: The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory Test Results: The DUT complies with the requirements in respect of all parameters subject to the test. The test results relate only to devices specified in this document Date and signatures: 18.05.2023 For the contents: Laboratory Manager 2 (7) Copyright ©Verkotan Document ID: FCC RF Exposure Evaluation Report_PureOne_ID6166_18052023.docx TABLE OF CONTENTS 1. SUMMARY OF SAR TEST REPORT ............................................................................................... 3 1.1 TEST DETAILS ........................................................................................................................... 3 1.2 EVALUATION RESULTS ............................................................................................................ 3 2. DESCRIPTION OF THE DEVICE UNDER TEST (DUT) .................................................................... 4 2.1 SUPPORTED FREQUENCY BANDS AND OPERATIONAL MODES ............................................. 5 3. TEST EXCLUSIONS ......................................................................................................................... 6 4. RESULTS.......................................................................................................................................... 7 4.1 MAXIMUM DEFINED OUTPUT POWER AND ERP .................................................................... 7 3 (7) Copyright ©Verkotan Document ID: FCC RF Exposure Evaluation Report_PureOne_ID6166_18052023.docx 1. SUMMARY OF SAR TEST REPORT 1.1 Test Details Device under Test (DUT): Product: PureOne Manufacturer: SuperCom LTD Model: PureOne Hardware Version: 3.0 FCC ID: 2BAX3PRFPUREONE30 FCC Test Firm Designation Number: FI0005 Document ID: FCC RF Exposure Evaluation Report_PureOne_ID6166_18052023.docx Document History/changes Initial 1.2 Evaluation Results The device conforms to the requirements of the standards when the maximum output power is less than or equal to the Test Exclusion Threshold Limit. Regulator System Maximum Power* [mW] Test Exclusion Threshold Limit at 5 mm separation** [mW] Result FCC GSM 850 17.54 22.50 PASS FCC GSM 1900 6.37 8.25 PASS FCC WCDMA 2 3.59 8.25 PASS FCC WCDMA 4 3.59 9.00 PASS FCC WCDMA 5 4.95 22.50 PASS FCC LTE 2 3.59 8.25 PASS FCC LTE 4 3.59 9.00 PASS FCC LTE 5 4.95 22.50 PASS FCC LTE 7 3.20 6.50 PASS FCC LTE 12 4.95 28.75 PASS FCC LTE 13 4.95 25.00 PASS FCC LTE 14 4.95 24.75 PASS FCC LTE 25 3.59 8.25 PASS FCC LTE 26 4.95 22.50 PASS FCC LTE 40 3.59 7.00 PASS FCC LTE 41 3.20 6.25 PASS FCC LTE 66 3.59 8.75 PASS 4 (7) Copyright ©Verkotan Document ID: FCC RF Exposure Evaluation Report_PureOne_ID6166_18052023.docx * According to Appendix A at 447498 D04 Interim General RF Exposure Guidance, the equation (B.2.) defines the thresholds for available maximum time-averaged power or maximum time-averaged ERP, whichever is greater. **For Extremity SAR a factor of 2.5 is applied for SAR-based exemption thresholds. 2. DESCRIPTION OF THE DEVICE UNDER TEST (DUT) The DUT is a wearable device for electronic and position monitoring of offenders. It is attached to the foot of the user. BT and Cellular technologies cannot transmit simultaneously. According to “2JF14 24Pa Product Datasheet” following cellul…

Text truncated - open the document above for the full version.