2BAX4-INTC200MIntellian C200M

C200M Intellian Certus Terminal Installation & Operation User Guide Doc. No. UG-KC2002-V1.0 Serial number of the product This serial number will be required for all troubleshooting or service inquiries. © 2023 Intellian Technologies, Inc. All rights reserved. Intellian and the Intellian logo are trademarks of Intellian Technologies, Inc., registered in the U.S. and other countries. The C200M is a trademark of Intellian Technologies, Inc. Intellian may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Intellian, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. All other logos, trademarks, and registered trademarks are the property of their respective owners. Information in this document is subject to change without notice. Every effort has been made to ensure that the information in this manual is accurate. Intellian is not responsible for printing or clerical errors. Disclaimer The information in this user manual is subject to change without prior notice through a product life cycle. A printed version of the user manual is periodically updated and may contain inaccuracies or omissions compared to the recent product information. The most up-to-date information is available on our website at intelliantech.com. Table of Contents 3 Table of Contents Chapter 1. Precautions 8 1.1 Warnings, Cautions, and Notes 8 1.2 General Precautions 8 Chapter 2. Certifications 10 Chapter 3. Introduction 11 3.1 Introduction of C200M 11 3.2 Features of C200M 11 3.3 Iridium Satellite Network 12 Chapter 4. Planning Installation 13 4.1 Selecting Installation Site 13 4.1.1 Avoiding RF Interference 13 4.1.2 RF Hazard Precautions 14 4.2 System Package 15 4.2.1 Above Deck Unit (ADU) 15 4.2.2 Below Deck Unit (BDU) 15 4.2.3 Packing List 16 4.3 System Cables 18 4.3.1 Antenna RF Cable (Connecting ADU - BDU) 18 4.4 Unpacking System Package 19 Chapter 5. Installing ADU 21 5.1 Antenna Dimensions 21 5.2 ADU Mounting Hole Pattern 22 5.3 Mast Designing (Installation Example) 23 5.4 Mounting Antenna 25 5.4.1 Mounting Antenna using C200M Outer Common Holes (with M6 Bolts) 25 5.4.2 Mounting Antennas using Holes matching Iridium Pilot (with M10 Bolts) 25 5.4.3 Mounting Antenna on Pole (Optional) 26 5.5 Vent Hole 27 5.6 Connecting Antenna RF Cable 28 Chapter 6. Installing BDU 30 6.1 Selecting BDU Installation Site 30 6.2 BDU Dimensions 30 6.3 BDU Mounting Template 32 6.4 Mounting BDU 33 6.4.1 Direct Mounting Type 33 6.4.2 19" Rack Mounting Type (Optional) 33 6.5 Antenna System Configuration 35 6.5.1 Data Sessions and Voice Calls 35 C200M - Marine Satellite Communication System 4 6.6 BDU Cable Connection 36 6.6.1 BDU Back Panel View 36 6.6.2 BDU Connector Pinout Guide 36 6.6.3 Connecting DC Power to BDU 40 6.6.4 Connecting BDU to ADU (Antenna) 43 6.6.5 Connecting BDU to Devices using LAN Port (RJ45) 43 6.6.6 Connecting BDU to Device using WAN Port 44 6.6.7 Connecting BDU to POTS Phone (RJ14) 44 6.6.8 Connecting BDU to External Devices 45 6.6.9 Connecting Wi-Fi Antenna to BDU 45 6.6.10 Grounding Stud 45 6.6.11 Inserting SIM Card 46 Chapter 7. Operating BDU 47 7.1 BDU Front Panel 47 7.2 Powering on System 48 7.3 Enabling PoE 48 7.4 Registering Phones to Make / Receive Calls 49 7.4.1 Checking Active Voice Lines 49 7.4.2 Registering Phones with Extension Number 49 7.4.3 Making Local Phone Call 50 7.4.4 Making Phone Call 50 7.4.5 Receiving Phone Call 50 7.5 Using Grandstream VoIP Phone Call 51 7.6 Using Wireless Devices through Wi-Fi 54 7.7 Using Mobile Phone Call 55 7.7.1 Installing Mobile Application 55 7.7.2 Registering New Extension for Voice Service (Optional) 55 7.7.3 Setting Mobile Phone 56 7.8 How to Access Terminal Remotely 57 Chapter 8. Using AptusLX 59 8.1 Introduction 59 8.2 Accessing Internal Webpage of BDU 59 8.3 Login 60 8.4 Top Menus 61 8.5 Account Menu 62 8.5.1 User 62 8.5.2 Logout 63 8.6 Dashboard 64 8.6.1 How to Add & Remove Panels (Dashboard Setting) 65 8.7 Status 66 8.7.1 Network 66 8.7.2 Wi-Fi 67 8.7.3 Phone/PABX 68 8.7.4 Data 69 8.7.5 Certus 70 8.7.6 SIM 71 Table of Contents 5 8.7.7 Terminal info 72 8.7.8 External GPIO 73 8.7.9 SDF 74 8.8 Setup 75 8.8.1 Network 75 8.8.2 Wi-Fi 76 8.8.3 Firewall 78 8.8.4 Phone/PABX 81 8.8.5 Data 82 8.8.6 Data Limit 84 8.8.7 SDF 85 8.8.8 External GPIO 86 8.8.9 Location Service 87 8.9 Tools 88 8.9.1 Software Upgrade 88 8.9.2 Backup & Restore 90 8.9.3 Reset 91 8.9.4 Logs 92 8.9.5 Diagnostic 93 8.9.6 Support 94 Chapter 9. Specification 95 9.1 Antenna Specification 95 9.2 RF Specification 95 9.3 Below Decks Unit Specification 96 9.4 Packing Specification 96 9.5 Environmental Specification 97 Chapter 10. Warranty Policy 98 Chapter 11. Appendix 99 11.1 Tightening Torque Specification 99 11.2 Pole Mount Kit 100 C200M - Marine Satellite Communication System 6 List of Figures Chapter 3. Introduction 11 Figure 1: Earth Showing Iridium Satellites in Six Defined Orbital Planes 12 Chapter 4. Planning Installation 13 Figure 2: Potential RF Interference 13 Figure 3: RF Hazard Precautions 14 Figure 4: Above Deck Unit (ADU) / Antenna Unit 15 Figure 5: Below Deck Unit (BDU) 15 Figure 6: Unpacking System Package (with ADU & BDU Sub-package) 19 Figure 7: Unpacking BDU Package 19 Figure 8: Unpacking ADU Package 20 Chapter 5. Installing ADU 21 Figure 9: Antenna Dimensions 21 Figure 10: ADU Mounting Hole Pattern 22 Figure 11: Recommended Mast Design using C200M Outer Common Holes (with M6 Bolts) 23 Figure 12: Recommended Mast Design using Holes matching Iridium Pilot (with M10 Bolts) 24 Figure 13: Mounting Antenna using C200M Outer Common Holes (with M6 Bolts) 25 Figure 14: Mounting Antennas using Holes matching Iridium Pilot (with M10 Bolts) 25 Figure 15: Installing 40A Pole Bushing inside Pole Tube 26 Figure 16: Installing Pole Bracket 26 Figure 17: Mounting Antenna …

Text truncated - open the document above for the full version.

Page 1 of 1 1 RF Exposure MPE Calculation Prediction of MPE limit at a given distance For purposes of these requirements mobile devices are defined by the FCC as transmitters designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between radiating structures and the body of the user or nearby persons. These devices are normally evaluated for exposure potential with relation to the MPE limits. As the 20 cm separation specified under FCC rules may not be achievable under normal operation of the EUT, an RF exposure calculation is needed to show the minimum distance required to be less than the power density limit, as required under FCC rules. Equation from IEEE C95.1 Where: S = power density R = distance to the centre of radiation of the antenna EIRP = EUT Maximum power Result Channel Frequency (MHz) EIRP (mW) Power density limit (S) (mW/cm 2 ) Distance (R) cm required to be less than the power density limit 1616.333 16218.1 1.0 35.9 1625.666 20417.4 1.0 40.3 4 arranged-re 4 2 S EIRP R R EIRP S==

FederalCommunicationsCommission AuthorisationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA 22ndMarch2024 FCCID: 2BAX4-INTC200M Sub:Antennainformationfor 2BAX4-INTC200M PleasefindthefollowingC200MAntennaInformationenclosed: AntennaType:QuadrifilarHelicalAntenna Manufacturer:IntellianTechnologies TestSet-upandMeasurements Thetestsystemmeasures3Dantennapatternsusing6dualpolarizedprobesinafullanechoic conical-cutchamber.Thechamberdimensionsare6metersx6metersx7meters.Themeasurement distanceis~3meters.Datacollectionisperformedusingavectornetworkanalyser. TheAntennawasmountedonaStyrofoammast,andthe3Dantennapatternwasmeasured.The patternwasmeasuredatthreefrequencies:thelower,mid,andupperfrequenciesoftheIridiumband. MeasurementswereperformedintwoAntennaorientationstominimisetheshadowingeffectfromthe Styrofoammast.Inpostprocessing,thetworesultingdatasetswerealignedbyrotatingthemin3Dand combinedtoobtainthefinal3Dpatterns. Asphericalcoordinatesystemwasused.Inthereporteddatasets,theDUTisorientedsothatthePhi anglecorrespondstotheazimuthangle,andthethetaanglecorrespondstotheelevationangle. Theantennaboresightisorientedtowardstheta=0°,andtheAntennacoaxialconnectorisorientedat phi=90°.Testswereperformedwithradomeinstalled. Antennapatterndataisrecordedat2°angularresolution.2Dantennapatternsarereportedfor elevationandazimuth. TheAntennawastestedwiththefullyfittedADU,includingtheradome. IntellianLtd 4thFloorCharterPlace,Uxbridge,UK,UB81JG TEL:+442031899777E-mail: [email protected] www.intelliantech.com TestResults ThekeyresultsoftheAntennatestingareshowninthetablebelow. Frequency Parameter1616MHz1621.25MHz1626.5MHz BoresightGainRHCP,dBiC1.21.10.8 BoresightGainLHCP,dBiC-22.4-22.1-19.9 BoresightAxialRatio,dB1.21.21.6 PhotooftheAntenna IntellianLtd 4thFloorCharterPlace,Uxbridge,UK,UB81JG TEL:+442031899777E-mail: [email protected] www.intelliantech.com

Report on the Radio Testing For Intellian Ltd on C200 M Report no. TRA-061097-47-00A 12th March 2024 REPORT ON THE RADIO TESTING OF A Intellian Ltd C200 M WITH RESPECT TO SPECIFICATION THE FCC RULES CFR 47, Part 25 TEST DATE: 13th February to 21st February 2024 Written by: S Hodgkinson Radio Test Engineer Approved by: J Charters Laboratory Manager Date: 12th March 2024 Disclaimers: [1] THIS DOCUMENT MAY BE REPRODUCED ONLY IN ITS ENTIRETY AND WITHOUT CHANGE [2] THE RESULTS CONTAINED IN THIS DOCUMENT RELATE ONLY TO THE ITEM(S) TESTED Report Number: TRA-061097-47-00A Issue: A Report Number: TRA-061097-47-00A Page 3 of 37 1 Revision Record Issue Number Issue Date Revision History A 12th March 2024 Original Report Number: TRA-061097-47-00A Page 4 of 37 2 Summary TEST REPORT NUMBER: TRA-061097-47-00A WORKS ORDER NUMBER: TRA-061097-02 PURPOSE OF TEST: Certification TEST SPECIFICATION: CFR47, Part 25 EQUIPMENT UNDER TEST (EUT): C200 M FCC IDENTIFIER: 2BAX4-INTC200M MANUFACTURER/AGENT: Intellian Ltd ADDRESS: 4th Floor, The Charter Building, Charter Place, Uxbridge UB8 1JG United Kingdom CLIENT CONTACT: Sophie Michel  07546740157  [email protected] TEST DATE: 13th February to 21st February 2024 TESTED BY: S Hodgkinson Element Report Number: TRA-061097-47-00A Page 5 of 37 2.1 Test Summary Test Method and Description Requirement Clause Applicable to this equipment Result / Note FCC PART 2 FCC PART 25 RF Power Output 2.1046 25.204 (a) Pass Emission Limitations 2.1049 25.202 (f) Pass Protection of Radio Navigation satellite services 2.1051 25.202 (c) 25.216 (f) Pass Spurious emissions- Radiated 2.1053 25.202 (f) 25.213 Pass Frequency Stability 2.1055 25.202 (d) Pass Notes: The results contained in this report relate only to the items tested, in the condition at time of test, and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set-up and exercised using the configurations, modes of operation and arrangements defined in this report only. Any modifications made are identified in Section 8 of this report. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 5.2 of this test report (Deviations from Test Standards). The decision rule for compliance is not inherent within this specification and compliance is based on the customer requesting a simple acceptance rule based on understanding and acceptance of Elements Measurement Uncertainty values. Report Number: TRA-061097-47-00A Page 6 of 37 3 Contents 1 Revision Record ............................................................................................................................... 3 2 Summary .......................................................................................................................................... 4 2.1 Test Summary ........................................................................................................................... 5 3 Contents ........................................................................................................................................... 6 4 Introduction ....................................................................................................................................... 7 5 Test Specifications ........................................................................................................................... 8 5.1 Normative References .............................................................................................................. 8 5.2 Deviations from Test Standards ................................................................................................ 8 6 Glossary of Terms ............................................................................................................................ 9 7 Equipment Under Test ................................................................................................................... 10 7.1 EUT Identification .................................................................................................................... 10 7.2 System Equipment .................................................................................................................. 10 7.3 EUT Mode of Operation .......................................................................................................... 10 7.4 EUT Radio Parameters ........................................................................................................... 10 7.4.1 General ............................................................................................................................ 10 7.4.2 Signal types ..................................................................................................................... 11 7.5 EUT Description ...................................................................................................................... 11 8 Modifications .................................................................................................................................. 12 9 EUT Test Setup .............................................................................................................................. 13 9.1 Block Diagram ......................................................................................................................... 13 9.2 General Set-up Photograph .................................................................................................... 14 9.3 Measurement software ........................................................................................................... 15 10 General Technical Parameters ................................................................................................... 16 10.1 Normal Conditions .......................................................…

Text truncated - open the document above for the full version.