2BAX9-3109Smart Door Lock

User Manual Model No: 3109 IMPORTANT: Read the instructions carefully before operating the appliance and keep them for future reference. Version 1.0 Email US: [email protected] Check out our video tutorials available at https://www.youtube.com/ @hotataaftersale/playlists Scan QR code for video tutorials Customer Service 1 Year WarrantyLifetime Customer Support Quality AssuranceSupport Return and Exchange [email protected] Contents Components List 2 Installation Guide Programming Guide Change Programming Code Advanced Stting Options Basic Functions Of The App FCC Warning 3 8 9 10 13 14 15 ISED Warning 1 [email protected] 16 Template Interior AssemblyMounting Plate Keypad Assembly Deadbolt Strike Plate Deadbolt Latch Battery Cover ① ② ③ ③ ④ ⑤ Components List 3/4"(19mm)Screws-4 pcs 3/4"(19mm)Screws-2 pcs 1-5/32"(33mm)Screws-2 pcs ① ② ③ ④⑤ Entry Key (2 ea.) Optional Reinforcement screws (1 set) Interior AssemblyMounting PlateDeadbolt Strike Plate Keypad Assembly Deadbolt Latch Tools Required Tools Required for Installation on Pre-drilled Doors: ·Phillips Screwdriver (DO NOT USE POWER DRILL!) 2 [email protected] Installation Guide Prepare the door and check dimensions Optional:For the best fix, you may need to drill an additional hole for the reinforcement screw. If drilling a new door, use the supplied template and the complete door drilling instructions. (60 or 70mm) (35 and 50mm) 1" 25mm 1.Measure to confirm that the hole in the door is 2-1/8"（54mm) 2.Measure to confirm that the backset is either 2-3/8"or 2-3/4"(60 or 70mm) 3.Measure to confirm that the hole in the door edge is 1"(25mm) 4.Measure to confirm the thickness of the door is between 1-3/8"and 2"(35 and 50mm) 2-1/8" 54mm 2-3/8" or 2-3/4" 1-3/8" and 2" 3 [email protected] Install the latch and strike up up up up up Installation Guide No adjustment is required. Proceed to next step. (As shown below) Twist the latch and adjust the bolt length. Make sure the hole in the door frame is drilled a minimum of 1"(25mm) deep. 1.Insert the latch bolt into the door. Actural Size 3 / 4"(19mm) Screws-2 ea. Make sure the +- shaped hole is in the bottom position YESNO 2-3/4"70mm YESNONO 2.Install strike on the door frame. Actural Size 3 / 4"(19mm) Screws-2 ea. 4 [email protected] cable 5 Install the exterior assembly Installation Guide 5 Locking lever transversal through the latch YESNO Route the cable through the door below the bolt and push the keypad onto the door. The key must be pulled out when installing. [email protected] R R L 6 Install the interior assembly Installation Guide 1.Please confirm the door opening direction before installing. Find the direction switch under the Interior Assembly, and change the direction as per the instructions below: 2.Route cable through the bottom of mounting plate. 3.Tighten screws evenly. Switch to the left Left opening door Switch to the right Right opening door 4.Ensure tight cable connection.5.Tighten screws evenly. Note:please support exterior assembly during mounting plate installation YESYESNONO Insert key and test latch.if latch does not extend or retract smoothly. please adjust mounting plate screws. If the keypad and mounting plate are deflection. please loose mounting plate screws and adjust. [email protected] 7 Install the batteries and test the lock Installation Guide Note: Do not use rechargeable batteries or Non-alkaline batteries. 1.Install 4 AA batteries in battery pack. ①Push up to remove the battery cover ②Install 4 AA batteries in battery pack. ③Push down to close the battery cover. ① Press and hold , the latch bolt extends by itself. ② Enter preset code: 123456, press , the latch bolt retracts by itself. 2.Test the lock. ！ If the latch bolt extends or retracts not smoothly. please check the door opening direction and re-install the lock. [email protected] Programming Guide Programming Symbols Type-C emergency power port PC Intelligent card Back / Clear Hold to lock / Number 0 Unlock / Programming Programming Code IC UC User Code(6 Digits) Factory default settings ！ The lock is in experience mode PC UC ID SET Programming Code: none User Code: any digits Indoor unlock / lock button Reset button 8 [email protected] Change Programming Code ！ 1. For your safety, it is strongly recommended that you set and remember your programming code in time. 2. When you enter the wrong button, you can press clear it. 3. If you do not enter any buttons within 15 seconds, the system will exit the programming mode, and you can attempt programming procedure again. If you have set a password in the "Tuya Smart" app as an administrator, you can ignore this step because the password set in the app is the programming code. If your lock is new, the factory preset code is none,Please set it up asap,The new programming code must be 6 digits,Touch to light up keyboard then: The lock can be set with 1 programming codes and 997 user codes or Intelligent cards. The first three registrations are programming codes, and the latter are users, both user codes and Intelligent cards are acceptable. Important tips for programming： 9 First time registration PCPC DONE NEXT Enter new programing code Reenter new programing code PC UC IC PC UC IC Not first time registration Touch to light up keyboard then: PC Verify programing code PC Enter new programing code PC DONE NEXT Reenter new programing code User code/ IC Card User code/ IC Card [email protected] Factory default reset Find a paper clip, put it into the hole at the bottom, long press for 5 seconds until the lock voice prompts “initialized successfully” Press keys 2 and 8 immediately after unlocking to enable the automatic locking function, The latch will automatically lock back within tens of seconds after each unlocking. When the product is powered off and restarted, the automatic locking function will be turned off. Auto-lock Advanced Stting Options A factory reset will delete all codes associated with the lock. ！ The lock has been reset …

Text truncated - open the document above for the full version.

ReportNo.:EED32P80445301Page 34 of 49 10PHOTOGRAPHSOFEUTConstructionalDetails ViewofProduct-1 ViewofProduct-2 ReportNo.:EED32P80445301Page 35 of 49 ViewofProduct-3 ViewofProduct-4 ReportNo.:EED32P80445301Page 36 of 49 ViewofProduct-5 ViewofProduct-6 ReportNo.:EED32P80445301Page 37 of 49 ViewofProduct-7 ViewofProduct-8 ReportNo.:EED32P80445301Page 38 of 49 ViewofProduct-9 ViewofProduct-10 ReportNo.:EED32P80445301Page 39 of 49 ViewofProduct-11 ViewofProduct-12 ReportNo.:EED32P80445301Page 40 of 49 ViewofProduct-13 ViewofProduct-14

ReportNo.:EED32P80445301Page 41 of 49 ViewofProduct-15 ViewofProduct-16 ReportNo.:EED32P80445301Page 42 of 49 ViewofProduct-17 ViewofProduct-18 ReportNo.:EED32P80445301Page 43 of 49 ViewofProduct-19 ViewofProduct-20 ReportNo.:EED32P80445301Page 44 of 49 ViewofProduct-21 ViewofProduct-22 ReportNo.:EED32P80445301Page 45 of 49 ViewofProduct-23 ViewofProduct-24 ReportNo.:EED32P80445301Page 46 of 49 ViewofProduct-25 ViewofProduct-26 ReportNo.:EED32P80445301Page 47 of 49 ViewofProduct-27 ViewofProduct-28 ReportNo.:EED32P80445301Page 48 of 49 ViewofProduct-29 ViewofProduct-30 ReportNo.:EED32P80445301Page 49 of 49 ViewofProduct-31 Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthis reportreferonlytothesample(s)tested.WithoutwrittenapprovalofCTI,thisreportcan’tbereproduced exceptinfull. ***EndofReport***

ReportNo.:EED32P80445302Page1of7 1COVERPAGE RFExposureEvaluationReport Product:SmartDoorLock Trademark:/ Model/Typereference:3109 SerialNumber:N/A ReportNumber:EED32P80445302 FCCID: 2BAX9-3109 DateofIssue:May.05,2023 TestStandards: 47CFRPart1.1307 47CFRPart1.1310 47CFRPart2.1091 47CFRPart2.1093 447498D04InterimGeneralRF ExposureGuidancev01 Testresult:PASS Preparedfor: GuangdongHOTATATechnologyGroupCo.,Ltd. No.21ShihuaRoad,HualongTown,PanyuDistrict,Guangzhou. Preparedby : CentreTestingInternationalGroupCo.,Ltd. HongweiIndustrialZone,Bao’an70District, Shenzhen,Guangdong,China TEL:+86-755-33683668 FAX:+86-755-33683385 Compiledby:Reviewedby: MarkChen TomChen Approvedby:Date:May.05,2023 AaronMa CheckNo.:3722030323 ReportNo.:EED32P80445302Page2of7 2Version VersionNo.DateDescription 00 May.05,2023 Original ReportNo.:EED32P80445302Page3of7 3Contents Page 1COVERPAGE....................................................................................................................................................................1 2VERSION............................................................................................................................................................................2 3CONTENTS........................................................................................................................................................................3 4GENERALINFORMATION..............................................................................................................................................4 4.1C LIENT I NFORMATION ...................................................................................................................................................4 4.2G ENERAL D ESCRIPTIONOF EUT...................................................................................................................................4 4.3P RODUCT S PECIFICATIONSUBJECTIVETOTHISSTANDARD ...........................................................................................4 4.4T EST L OCATION .............................................................................................................................................................5 4.5D EVIATIONFROM S TANDARDS ......................................................................................................................................5 4.6A BNORMALITIESFROM S TANDARD C ONDITIONS ..........................................................................................................5 4.7O THER I NFORMATION R EQUESTEDBYTHE C USTOMER ................................................................................................5 5SAREVALUATION...........................................................................................................................................................6 5.1RFE XPOSURE C OMPLIANCE R EQUIREMENT .................................................................................................................6 5.1.1Limits....................................................................................................................................................................6 5.1.2TestProcedure....................................................................................................................................................6 5.1.3EUTRFExposureEvaluation..........................................................................................................................7 ReportNo.:EED32P80445302Page4of7 4GeneralInformation 4.1ClientInformation Applicant: GuangdongHOTATATechnologyGroupCo.,Ltd. AddressofApplicant: No.21ShihuaRoad,HualongTown,PanyuDistrict,Guangzhou. Manufacturer: GuangdongHOTATATechnologyGroupCo.,Ltd. AddressofManufacturer: No.21ShihuaRoad,HualongTown,PanyuDistrict,Guangzhou. Factory: zhongshanFuyuIntelligentLockMfg.Co.,Ltd. AddressofFactory: LianshengSouthRoad,LianfengIndustrialZone,Xiaolantown,Zhongshancity, Guangdong,China 4.2GeneralDescriptionofEUT ProductName: SmartDoorLock ModelNo.(EUT): 3109 TradeMark: / 4.3 ProductSpecificationsubjectivetothisstandard ForBLE FrequencyRange:2402MHz~2480MHz ModulationType:GFSK TestPowerGrade:Default TestSoftwareofEUT:BK3256RFTest AntennaType: PCBAntenna AntennaGain: 1.43dBi PowerSupply: BatteryDC6.0V MaxConductedPeak OutputPower: -2.77dBm TheMaxConductedPeakOutputPowerdatarefertothereportEED32P80445301 ForNFC OperationFrequency:13.56MHz ModulationType:ASK AntennaType:PCBantenna maximumFieldStrength (E)@3m: 57.63dBμV/m ThemaximumFieldStrengthdatarefertothereportEED32P80445303 SampleReceivedDate: Mar.31,2023 SampletestedDate: Mar.31,2023toApr.20,2023 CompanyNameandAddressshownonReport,thesample(s)andsampleInformationwas/wereprovided bytheapplicantwhoshouldberesponsiblefortheauthenticitywhichCTIhasn’tverified. ReportNo.:EED32P80445302Page5of7 4.4TestLocation Alltestswereperformedat: CentreTestingInternationalGroupCo.,Ltd BuildingC,HongweiIndustrialParkBlock70,Bao'anDistrict,Shenzhen,China Telephone:+86(0)75533683668Fax:+86(0)75533683385 Notestsweresub-contracted. FCCDesignationNo.:CN1164 4.5DeviationfromStandards None. 4.6AbnormalitiesfromStandardConditions None. 4.7OtherInformationRequestedbytheCustomer None. ReportNo.:EED32P80445302Page6of7 5SAREvaluation 5.1RFExposureComplianceRequirement 5.1.1Limits TheSAR-basedexemptionformulaof§1.1307(b)(3)(i)(B),repeatedhereasFormula(B.2),appliesfor singlefixed,mobile,andportableRFsourceswithavailablemaximumtime-averagedpoweroreffective radiatedpower(ERP),whicheverisgreater,oflessthanorequaltothethresholdPth(mW). Thismethodshallonlybeusedatseparationdistancesfrom0.5cmto40cmandatfrequenciesfrom 0.3GHzto6GHz(inclusive).PthisgivenbyFormula andfisinGHz,distheseparationdistance(cm),andERP20cmisperFormula(B.1). The1mWBlanketExemptionof§1.1307(b)(3)(i)(A)appliesforsinglefixed,mobile,andportableRF sourceswithavailablemaximumtime-averagedpowerofnomorethan1mW,regardlessofseparation distance. 5.1.2TestProcedure Softwareprovidedbyclientena…

Text truncated - open the document above for the full version.

ReportNo.:RFI-LAB-RF-202304-DD28 QP030-E41 Page1of10 TestingReport CustomerName:ZhongshanZhuobidaTechnologyCo.,Ltd. ProductName:KeypadElectronicLock SampleModel:3109 ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2023.04.26 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202304-DD28 QP030-E41 Page2of10 Version VersionNo.DateDescriptionFormulateApproval A02023.04.26Forthefirsttime,formulateZkrisEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4EUTsetupphotooffreespaceOTAtesting.........................................................................6 3.TestResults.....................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................8 3.3.1VSWRparameters.....................................................................................................8 3.3.2VSWRdata................................................................................................................8 3.3.3Typicalfreespaceefficiencyandgain......................................................................8 3.3.4Typicalfreespaceradiationpattern...........................................................................9 （Thefollowingisblank）..............................................................................................................10 ReportNo.:RFI-LAB-RF-202304-DD28 QP030-E41 Page3of10 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13682621346 E-mail [email protected] Equipment AlltheequipmentusedinthereportisfixedinZoneB,WestSideof1/F,Building1, TingweiIndustrialPark,No.6LiufangRoad,Bao'anDistrict,Shenzhen 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202304-DD28 QP030-E41 Page4of10 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date OTATest System RayZone-5000 RFI-LAB-RF -D00 GTS2023.3.142025.3.13 Network Analyzer E5071C RFI-LAB-RF -D01 KEYSIGHT2022.5.132023.5.12 1.4Testenvironment Temperature 22.7°C Humidity 58%RH Pressure 100.20kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202304-DD28 QP030-E41 Page5of10 2.SampleInformation 2.1Clientinformation Name ZhongshanZhuobidaTechnologyCo.,Ltd. Address No.2,ZhuyuanLuoxiangNorthStreet,Xiaolan,Zhongshancity, GuangdongProvince Contacts YEWEIGEN Tel 13318264689 E-mail [email protected] Manufacturer ZhongshanZhuobidaTechnologyCo.,Ltd. 2.2DescriptionofEUT(S) ProductName KeypadElectronicLock SampleModel 3109 AntennaSize / SerialNo. / AntennaType PCBAntenna TestItem VSWR;Antennagain;Efficiency;Radiationpattern FrequencyRange 2400-2500MHz ReceivedDate 2023.04.25 TestDate 2023.04.25 Remark ThelengthoftheRFcableis45mm ReportNo.:RFI-LAB-RF-202304-DD28 QP030-E41 Page6of10 2.3EUTappearance 2.4EUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202304-DD28 QP030-E41 Page7of10 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern VSWR Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-1979 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty VSWR±0.3 Antennagain±1dB Radiationefficiency ± 10% ReportNo.:RFI-LAB-RF-202304-DD28 QP030-E41 Page8of10 3.3Testdata 3.3.1VSWRparameters 3.3.2VSWRdata 3.3.3Typicalfreespaceefficiencyandgain Frequency/MHz 240024502500 VSWR 2.02262.79292.9411 Frequency/MHz 24002410242024302440245024602470248024902500 PeakGain/dBi 1.431.050.710.490.15-…

Text truncated - open the document above for the full version.

ReportNo.:EED32P80445301Page 1 of 24 Appendix:BluetoothLE ReportNo.:EED32P80445301Page 2 of 24 Contents Contents.....................................................................................................................................................................................................2 DutyCycle..................................................................................................................................................................................................3 MaximumPeakConductedOutputPower..................................................................................................................................................6 -6dBBandwidth..........................................................................................................................................................................................9 OccupiedChannelBandwidth..................................................................................................................................................................12 MaximumPowerSpectralDensityLevel..................................................................................................................................................15 BandEdge................................................................................................................................................................................................18 ConductedRFSpuriousEmission............................................................................................................................................................21 ReportNo.:EED32P80445301Page 3 of 24 DutyCycle ConditionModeFrequency(MHz)AntennaDutyCycle(%)CorrectionFactor(dB)1/T(kHz) NVNTBLE1M2402Ant126.945.73.52 NVNTBLE1M2440Ant127.015.683.51 NVNTBLE1M2480Ant127.25.653.48 ReportNo.:EED32P80445301Page 4 of 24 TestGraphs DutyCycleNVNTBLE1M2402MHzAnt1 DutyCycleNVNTBLE1M2440MHzAnt1 ReportNo.:EED32P80445301Page 5 of 24 DutyCycleNVNTBLE1M2480MHzAnt1 ReportNo.:EED32P80445301Page 6 of 24 MaximumPeakConductedOutputPower ConditionModeFrequency (MHz) AntennaConductedPower (dBm) Limit (dBm) Verdict NVNTBLE1M2402Ant1-3.6630Pass NVNTBLE1M2440Ant1-2.7730Pass NVNTBLE1M2480Ant1-3.8330Pass ReportNo.:EED32P80445301Page 7 of 24 TestGraphs PeakPowerNVNTBLE1M2402MHzAnt1 PeakPowerNVNTBLE1M2440MHzAnt1 ReportNo.:EED32P80445301Page 8 of 24 PeakPowerNVNTBLE1M2480MHzAnt1 ReportNo.:EED32P80445301Page 9 of 24 -6dBBandwidth ConditionModeFrequency(MHz)Antenna-6dBBandwidth(MHz)Limit-6dBBandwidth(MHz)Verdict NVNTBLE1M2402Ant10.7970.5Pass NVNTBLE1M2440Ant10.8110.5Pass NVNTBLE1M2480Ant10.8080.5Pass ReportNo.:EED32P80445301Page 10 of 24 TestGraphs -6dBBandwidthNVNTBLE1M2402MHzAnt1 -6dBBandwidthNVNTBLE1M2440MHzAnt1 ReportNo.:EED32P80445301Page 11 of 24 -6dBBandwidthNVNTBLE1M2480MHzAnt1 ReportNo.:EED32P80445301Page 12 of 24 OccupiedChannelBandwidth ConditionModeFrequency(MHz)Antenna99%OBW(MHz) NVNTBLE1M2402Ant11.089 NVNTBLE1M2440Ant11.095 NVNTBLE1M2480Ant11.094 ReportNo.:EED32P80445301Page 13 of 24 TestGraphs OBWNVNTBLE1M2402MHzAnt1 OBWNVNTBLE1M2440MHzAnt1 ReportNo.:EED32P80445301Page 14 of 24 OBWNVNTBLE1M2480MHzAnt1 ReportNo.:EED32P80445301Page 15 of 24 MaximumPowerSpectralDensityLevel ConditionModeFrequency (MHz) AntennaConductedPSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNTBLE1M2402Ant1-21.078Pass NVNTBLE1M2440Ant1-19.838Pass NVNTBLE1M2480Ant1-21.68Pass ReportNo.:EED32P80445301Page 16 of 24 TestGraphs PSDNVNTBLE1M2402MHzAnt1 PSDNVNTBLE1M2440MHzAnt1 ReportNo.:EED32P80445301Page 17 of 24 PSDNVNTBLE1M2480MHzAnt1 ReportNo.:EED32P80445301Page 18 of 24 BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTBLE1M2402Ant1-39.5-20Pass NVNTBLE1M2480Ant1-39.55-20Pass ReportNo.:EED32P80445301Page 19 of 24 TestGraphs BandEdgeNVNTBLE1M2402MHzAnt1Ref BandEdgeNVNTBLE1M2402MHzAnt1Emission ReportNo.:EED32P80445301Page 20 of 24 BandEdgeNVNTBLE1M2480MHzAnt1Ref BandEdgeNVNTBLE1M2480MHzAnt1Emission ReportNo.:EED32P80445301Page 21 of 24 ConductedRFSpuriousEmission ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTBLE1M2402Ant1-36.6-20Pass NVNTBLE1M2440Ant1-42.34-20Pass NVNTBLE1M2480Ant1-40.95-20Pass ReportNo.:EED32P80445301Page 22 of 24 TestGraphs Tx.SpuriousNVNTBLE1M2402MHzAnt1Ref Tx.SpuriousNVNTBLE1M2402MHzAnt1Emission ReportNo.:EED32P80445301Page 23 of 24 Tx.SpuriousNVNTBLE1M2440MHzAnt1Ref Tx.SpuriousNVNTBLE1M2440MHzAnt1Emission ReportNo.:EED32P80445301Page 24 of 24 Tx.SpuriousNVNTBLE1M2480MHzAnt1Ref Tx.SpuriousNVNTBLE1M2480MHzAnt1Emission ***EndofReport***

ReportNo.:EED32P80445301Page1of49 1 COVERPAGE TESTREPORT Product:SmartDoorLock Trademark:/ Model/Typereference:3109 SerialNumber:N/A ReportNumber:EED32P80445301 FCCID: 2BAX9-3109 DateofIssue:May.05,2023 TestStandards: 47CFRPart15SubpartC Testresult:PASS Preparedfor: GuangdongHOTATATechnologyGroupCo.,Ltd. No.21ShihuaRoad,HualongTown,PanyuDistrict,Guangzhou. Preparedby : CentreTestingInternationalGroupCo.,Ltd. HongweiIndustrialZone,Bao’an70District, Shenzhen,Guangdong,China TEL:+86-755-33683668 FAX:+86-755-33683385 Compiledby:Reviewedby: MarkChen TomChen Approvedby:Date:May.05,2023 AaronMa CheckNo.:8515310323 ReportNo.:EED32P80445301Page 2 of 49 2Content 1COVERPAGE.....................................................................................................................................................................1 2CONTENT............................................................................................................................................................................2 3VERSION.............................................................................................................................................................................3 4TESTSUMMARY...............................................................................................................................................................4 5GENERALINFORMATION...............................................................................................................................................5 5.1C LIENT I NFORMATION ....................................................................................................................................................5 5.2G ENERAL D ESCRIPTIONOF EUT.................................................................................................................................5 5.3T EST C ONFIGURATION ..................................................................................................................................................6 5.4T EST E NVIRONMENT .....................................................................................................................................................7 5.5D ESCRIPTIONOF S UPPORT U NITS ...............................................................................................................................7 5.6T EST L OCATION .............................................................................................................................................................7 5.7M EASUREMENT U NCERTAINTY (95% CONFIDENCELEVELS , K =2).............................................................................8 6EQUIPMENTLIST..............................................................................................................................................................9 7TESTRESULTSANDMEASUREMENTDATA.........................................................................................................12 7.1A NTENNA R EQUIREMENT ............................................................................................................................................12 7.2C ONDUCTED E MISSIONS .............................................................................................................................................13 7.3M AXIMUM C ONDUCTED O UTPUT P OWER ..................................................................................................................16 7.4DTSB ANDWIDTH ........................................................................................................................................................17 7.5M AXIMUM P OWER S PECTRAL D ENSITY .....................................................................................................................18 7.6B AND E DGEMEASUREMENTSAND C ONDUCTED S PURIOUS E MISSION ...................................................................19 7.7R ADIATED S PURIOUS E MISSION &R ESTRICTEDBANDS ...........................................................................................20 8APPENDIXBLE................................................................................................................................................................31 9PHOTOGRAPHSOFTESTSETUP..............................................................................................................................32 10PHOTOGRAPHSOFEUTCONSTRUCTIONALDETAILS...................................................................................34 ReportNo.:EED32P80445301Page 3 of 49 3Version VersionNo.DateDescription 00May.05,2023Original ReportNo.:EED32P80445301Page 4 of 49 4TestSummary TestItemTestRequirementResult AntennaRequirement 47CFRPart15SubpartCSection 15.203/15.247(c) PASS ACPowerLineConducted Emission 47CFRPart15SubpartCSection 15.207 PASS DTSBandwidth 47CFRPart15SubpartCSection 15.247(a)(2) PASS MaximumConductedOutput Power 47CFRPart15SubpartCSection 15.247(b)(3) PASS MaximumPowerSpectral Density 47CFRPart15SubpartCSection15.247(e)PASS BandEdgeMeasurements 47CFRPart15SubpartCSection 15.247(d) PASS ConductedSpurious Emissions 47CFRPart15SubpartCSection 15.247(d) PASS RadiatedSpuriousEmission& Restrictedbands 47CFRPart15SubpartCSection 15.205/15.209 PASS Remark: CompanyNameandAddressshownonReport,thesample(s)andsampleInformationwereprovidedbythe applicantwhoshouldberesponsiblefortheauthenticitywhichCTIhasn’tverified. ReportNo.:EED32P80445301Page 5 of 49 5GeneralInformation 5.1ClientInformation Applicant:GuangdongHOTATATechnologyGroupCo.,Ltd. AddressofApplicant:No.21ShihuaRoad,HualongTown,PanyuDistrict,Guangzhou. Manufacturer:GuangdongHOTATATechnologyGroupCo.,Ltd. AddressofManufacturer:No.21ShihuaRoad,HualongTown,PanyuDistrict,Guangzhou. Factory:zhongshanFuyuIntelligentLockMfg.Co.,Ltd. AddressofFactory:LianshengSouthRoad,LianfengIndustrialZone,Xiaolantown, Zhongshancity,Guangdong,China 5.2GeneralDescriptionofEUT ProductName: SmartDoorLock ModelNo.: …

Text truncated - open the document above for the full version.

ReportNo.:EED32P80445301Page 32 o…

Text truncated - open the document above for the full version.