2BAZS-HUM1020Booking Device

Booking Device - Device Manual Table of contents Booking Device - Device Manual 1 About This Manual 2 Intended Use 2 Parts list 4 Safety Instructions 4 Mounting instructions 7 Standard walls 7 Glass walls 9 Technical Specifications 10 Visual interface 10 Connectivity 11 Power 11 Compatible Platforms 11 User Interface Languages 11 API & Other 12 Size and Weight 13 Architecture Overview 13 Getting Started 16 Initial Boot & Network Configuration 16 Humly Booking Device 3 About This Manual The Booking Device User’s Manual provides instructions to follow when setting up a new Booking Device. This document is intended to compliment the training and expertise of qualified personnel, not to replace it. For any questions that might arise, please visit: https://www.humly.com Or, send an email to [email protected] Intended Use The intended use of the Booking Device is to allow users to book resources such as desks and meeting rooms. It will not only show when a resource is available, but also when a resource is occupied or when user action such as checking in is possible. The Booking Device will prevent other users from disturbing or claiming the booked resource if it’s already booked. At the same time it will help users to know whether a resource available for them to book Read the safety instructions thoroughly before powering up the device or starting any servicing of the Humly products. Keep this document for later use. Parts list Parts included in standard box ● Booking Device (including cable cover/wall mount) Humly Booking Device 4 Booking Device Wall/Desk mount for vertical/horizontal surfaces Humly Booking Device 5 Accessories (provided separately) : ● 5v Power Supply ● Desk mount ● PoE and desk control adapter ● Glass wall kit Safety Instructions Read these safety instructions before you use the product. This Unit complies with all the relevant safety requirements for IT equipment. It should not be used or stored in a location where the surrounding temperature is higher than 40°C or below 10°C. Keep these safety instructions and other documentation for future use. WARNING! Correct assembly, fitting and installation is of the utmost importance. This is not covered by Humly AB’s undertakings. Incorrect fitting and/or installation may result in personal injury or loss. Humly AB disclaims all liability, of whatever kind, if the product is assembled, fitted and/or installed in an incorrect manner. For safety reasons, no screws for attachment to walls and vertical/horizontal surfaces are included since the characteristics of walls and vertical/horizontal surfaces and their load-bearing capacity may vary. The assistance of a specialist or dealer may be required, if necessary, for appropriate fixtures for the wall or the vertical/horizontal surface concerned. WARNING! Opening or removing covers and servicing of the product may only be carried out by an authorized specialist. Unauthorized opening and unprofessional repair operations may result in serious risks for the user (risk of electrical shocks, fire hazards and other electrical risks). WARNING! Do not use the product if the outer casing is damaged. WARNING! Do not use defective/damaged cables. A defective cable may result in electrical shocks or fire hazards. WARNING! The product is powered by a 5V power adapter (sold separately). WARNING! The product and/or the DC adapter must not be covered when it is in operation. WARNING! Do not insert any foreign object into the product. Humly Booking Device 6 WARNING! In emergencies (e.g. damaged casing or cables, penetration of liquid or foreign matter), remove the DC connector and/or the POE cable immediately. WARNING! The product may only be used in an indoor environment. WARNING! Clean with a damp cloth and do not use any detergent, alcohol or other chemical on any surface of the device. WARNING! Humly AB disclaims all liabilities, of any kind, if the product is used in a manner other than that specified in the user manual. Europe Conforms to the following Product Specifications: - RED 2014/53/EU LVD 2014/35/EU EMC 2014/53/EU RED - ETSI EN 300 328 - ETSI EN 301 489-1 - ETSI EN 301 489-3 - ETSI EN 301 489-17 - EN 55032: 2012+AC: 2013 - EN 55035 - EN 62368-1:2014 Supplementary information In addition, the product is battery powered and the power supply provided with this product has been certified to IEC 60950: 2005 2 nd edition +Am1:2009+Am2: 2013/ IEC 62368-1: 2014. As manufactur er, we declare under our sole responsibility that the equipment follows the provisions of the Standards stated above. CAUTION - Only approved accessories may be used with this equipment. In general, all cables must be high quality, shielded, correctly terminated and normally restricted to two meters in length. Power supplies approved for this product employ special provisions to avoid radio interference and should not be altered or substituted. Unapproved modifications or operations beyond or in conflict with these instructions for use may void authorization by the authorities to operate the equipment. This Trimble product has been tested and found to comply with all requirements for CE Marking and sale within the European Economic Area (EEA). The device has Bluetooth and wireless LAN approval and satisfies the requirements for Radio and Telecommunication Terminal Equipment specified by European Council Directive 2014/53/EU. These requirements provide reasonable protection against harmful interference when the equipment is operated appropriately in a residential or commercial environment. Humly Booking Device 7 Canada IC: 30421-HUM1020 Contains IC: 21098-ESPS3WROOMU This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlem…

Text truncated - open the document above for the full version.

Booking Device - Device Manual Table of contents Booking Device - Device Manual 1 About This Manual 2 Intended Use 2 Parts list 4 Safety Instructions 4 Mounting instructions 7 Standard walls 7 Glass walls 9 Technical Specifications 10 Visual interface 10 Connectivity 11 Power 11 Compatible Platforms 11 User Interface Languages 11 API & Other 12 Size and Weight 13 Architecture Overview 13 Getting Started 16 Initial Boot & Network Configuration 16 INTERACT Booking Device 3 About This Manual The Booking Device User’s Manual provides instructions to follow when setting up a new Booking Device. This document is intended to compliment the training and expertise of qualified personnel, not to replace it. For any questions that might arise, please visit: https://www. gobright.com Or, send an email to info@ gobright.com Intended Use The intended use of the Booking Device is to allow users to book resources such as desks and meeting rooms. It will not only show when a resource is available, but also when a resource is occupied or when user action such as checking in is possible. The Booking Device will prevent other users from disturbing or claiming the booked resource if it’s already booked. At the same time it will help users to know whether a resource available for them to book Read the safety instructions thoroughly before powering up the device or starting any servicing of the INTERACT products. Keep this document for later use. Parts list Parts included in standard box ● Booking Device (including cable cover/wall mount) INTERACT Booking Device 4 Booking Device Wall/Desk mount for vertical/horizontal surfaces INTERACT Booking Device 5 Accessories (provided separately) : ● 5v Power Supply ● Desk mount ● PoE and desk control adapter ● Glass wall kit Safety Instructions Read these safety instructions before you use the product. This Unit complies with all the relevant safety requirements for IT equipment. It should not be used or stored in a location where the surrounding temperature is higher than 40°C or below 10°C. Keep these safety instructions and other documentation for future use. WARNING! Correct assembly, fitting and installation is of the utmost importance. This is not covered by GOBRIGHT BV’s undertakings. Incorrect fitting and/or installation may result in personal injury or loss. GOBRIGHT BV disclaims all liability, of whatever kind, if the product is assembled, fitted and/or installed in an incorrect manner. For safety reasons, no screws for attachment to walls and vertical/horizontal surfaces are included since the characteristics of walls and vertical/horizontal surfaces and their load-bearing capacity may vary. The assistance of a specialist or dealer may be required, if necessary, for appropriate fixtures for the wall or the vertical/horizontal surface concerned. WARNING! Opening or removing covers and servicing of the product may only be carried out by an authorized specialist. Unauthorized opening and unprofessional repair operations may result in serious risks for the user (risk of electrical shocks, fire hazards and other electrical risks). WARNING! Do not use the product if the outer casing is damaged. WARNING! Do not use defective/damaged cables. A defective cable may result in electrical shocks or fire hazards. WARNING! The product is powered by a 5V power adapter (sold separately). WARNING! The product and/or the DC adapter must not be covered when it is in operation. WARNING! Do not insert any foreign object into the product. INTERACT Booking Device 6 WARNING! In emergencies (e.g. damaged casing or cables, penetration of liquid or foreign matter), remove the DC connector and/or the POE cable immediately. WARNING! The product may only be used in an indoor environment. WARNING! Clean with a damp cloth and do not use any detergent, alcohol or other chemical on any surface of the device. WARNING! GOBRIGHT BV disclaims all liabilities, of any kind, if the product is used in a manner other than that specified in the user manual. Europe Conforms to the following Product Specifications: - RED 2014/53/EU LVD 2014/35/EU EMC 2014/53/EU RED - ETSI EN 300 328 - ETSI EN 301 489-1 - ETSI EN 301 489-3 - ETSI EN 301 489-17 - EN 55032: 2012+AC: 2013 - EN 55035 - EN 62368-1:2014 Supplementary information In addition, the product is battery powered and the power supply provided with this product has been certified to IEC 60950: 2005 2 nd edition +Am1:2009+Am2: 2013/ IEC 62368-1: 2014. As manufacturer, we declare under our sole responsibility that the equipment follows the provisions of the Standards stated above. CAUTION - Only approved accessories may be used with this equipment. In general, all cables must be high quality, shielded, correctly terminated and normally restricted to two meters in length. Power supplies approved for this product employ special provisions to avoid radio interference and should not be altered or substituted. Unapproved modifications or operations beyond or in conflict with these instructions for use may void authorization by the authorities to operate the equipment. This Trimble product has been tested and found to comply with all requirements for CE Marking and sale within the European Economic Area (EEA). The device has Bluetooth and wireless LAN approval and satisfies the requirements for Radio and Telecommunication Terminal Equipment specified by European Council Directive 2014/53/EU. These requirements provide reasonable protection against harmful interference when the equipment is operated appropriately in a residential or commercial environment. INTERACT Booking Device 7 Canada IC: 30422-INT1 Contains IC: 21098-ESPS3WROOMU This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Cla…

Text truncated - open the document above for the full version.

Certification Application Attestation Statements Humly Solutions AB Sveav. 124, 3rd Floor Stockholm 11350 Sweden Subject: FCC ID: 2BAZS-HUM1020 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Humly Solutions AB certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Humly Solutions AB (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: May 24, 2023 City: Stockholm Name (2) : Anders Karlsson Function: CEO Telephone number: +46733690101 Email address: [email protected] Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK”

U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company name: Humly Inc FRN: 0033775636 Contact person name: Anders Karlsson Street address: 1209 N Orange St ZIP/City/State 19801/Wilmington/DELAWARE Telephone number: +13022004292 Email address: [email protected] Signature: Date: May 24, 2023 This letter is to confirm that we Humly Inc have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Humly Solutions AB Grantee Code: 2BAZS Contact person name: Anders Karlsson Street address: Sveav. 124, 3rd Floor, ZIP/City Stockholm 11350 Country Sweden Telephone number: +46733690101 Email address: [email protected] Signature: Date: May 24, 2023

Authorization Letter Date: March 6, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BAZS-HUM1020 To Whom It May Concern: We, Humly Solutions AB, the undersigned, hereby authorize the following person on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by DEKRA Testing and Certification Co., Ltd. on our behalf shall have the same effect as acts of our own. Agent Company name : DEKRA Testing and Certification Co., Ltd. Address : No. 26, Huaya 1st Road., Guishan District, Taoyuan City, 33341, Taiwan Contact Name : Stanley Wu Email : [email protected] We are therefore responsible for the contents of the application. Product description : Booking Device Model No. : HUM1020, INT1 Brand : Humly, GOBRIGHT Sincerely, Signature Contact Name: Anders Karlsson Job Title: CEO Email: [email protected]

Declaration of Identity Date: September 23, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BAZS-HUM1020 To Whom It May Concern: Due to the business consideration, we, Humly Solutions AB, hereby declare that our products of Booking Device have following difference: Product Name Brand Name Model No. Booking Device Humly HUM1020 GOBRIGHT INT1 In addition to the above information, these devices are identical. A ny questions regarding this declaration, please don’t hesitate to contact us. S incerely, S ignature Contact Name: Anders Karlsson Job Title: CEO Email: [email protected]

Confidential Request Letter Date: March 6, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for confidentiality FCC ID: 2BAZS-HUM1020 Long-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Tune-up procedure Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Short-Term Confidentiality (STC) Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Internal Photos User’s Manual External Photos Te s t S e t-up Photos Justification: Due to market confidential, we ask for the short-term confidentiality. Planned Release Date STC: - If no date is given, 180 days from grant date will be used. Sincerely, Signature Contact Name: Anders Karlsson Job Title: CEO Email: [email protected]

Report No: 2320693R-Product Photos Page: 2 of 16 (1) EUT Photo (2) EUT Photo Report No: 2320693R-Product Photos Page: 3 of 16 (3) EUT Photo (4) EUT Photo Report No: 2320693R-Product Photos Page: 4 of 16 (5) EUT Photo (6) EUT Photo

HRIRating label49x14xT0.125mm 3M467 Black25U400159-00125U400159-001 X TONY HUANG 2023/2/22 Vivian Tseng 2023/2/22 RELEASE DRAWING. TONY 2023/2/22 Vivian Tseng 2023/2/22 Vivian Tseng 2023/2/22 Vivian Sveavägen 124, 113 50 Stockholm
:4pt 49.00 0.18 14.00 R0.50 B Label

HRI Rating label _GoBright rating 49x14xT0.125mm 3M467 Black 25U400163-001 25U400163-001 X TONY HUANG 2023/3/20 Vivian Tseng 2023/3/13RELEASE DRAWING. TONY 2023/3/20 Vivian Tseng 2023/3/20 Vivian Tseng 2023/3/20 Vivian Contains FCC ID: 2AC7Z-ESPS3WROOM1 Contains IC: 21098-ESPS3WROOM1 WEB : www.gobright.com INPUT： 5V 3A 字體:4pt 49.00 0.18 14.00 R0.50 B
Label MODEL：INT1 Contains FCC ID: 2AC7Z-ESPS3WROOM1 Contains IC: 21098-ESPS3WROOM1 WEB : www.gobright.com INPUT： 5V 3A MODEL：INT1 1:1效果圖 1:1黑白稿 GOBRIGHT INTERACT BOOKING DEVICE GOBRIGHT INTERACT BOOKING DEVICE Humly Solutions AB Sveavägen 124, 113 50 Stockholm Humly Solutions AB Sveavägen 124, 113 50 Stockholm

Report No: 2320693R-Product Photos Page: 5 of 16 (7) EUT Photo (8) EUT Photo Report No: 2320693R-Product Photos Page: 6 of 16 (9) EUT Photo (10) EUT Photo Report No: 2320693R-Product Photos Page: 7 of 16 (11) EUT Photo (12) EUT Photo Report No: 2320693R-Product Photos Page: 8 of 16 (13) EUT Photo (14) EUT Photo Report No: 2320693R-Product Photos Page: 9 of 16 (15) EUT Photo _RF Chip (16) EUT Photo _RF Chip Report No: 2320693R-Product Photos Page: 10 of 16 (17) EUT Photo _RF Chip (18) EUT Photo _RF Chip Report No: 2320693R-Product Photos Page: 11 of 16 (19) EUT Photo (20) EUT Photo _NFC Chip Report No: 2320693R-Product Photos Page: 12 of 16 (21) EUT Photo (22) EUT Photo Report No: 2320693R-Product Photos Page: 13 of 16 (23) EUT Photo (24) EUT Photo Report No: 2320693R-Product Photos Page: 14 of 16 (25) EUT Photo _RF Antenna (26) EUT Photo Report No: 2320693R-Product Photos Page: 15 of 16 (27) EUT Photo (28) EUT Photo Report No: 2320693R-Product Photos Page: 16 of 16 (29) EUT Photo _NFC Antenna

Report No.: 2320693R-RFUSV17S-A Page: 1 of 7 Test report No.: 2320693R-RFUSV17S-A RF Exposure Report Product Name Booking Device Trademark Humly, GOBRIGHT Model and /or type reference HUM1020, INT1 FCC ID 2BAZS-HUM1020 Applicant ́s name / address Humly Solutions AB Sveav. 124, 113 50 Stockholm, Sweden Manufacturer ́s name Humly Solutions AB Test method requested, standard KDB 447498 D01 v06 Minimum test separation distance ≥ 20 cm For low power devices Verdict Summary IN COMPLIANCE Documented By (Senior Project Specialist / April Chen) Approved By (Senior Engineer / Jack Hsu) Approved By (Manager / Tim Sung) Date of Receipt 2023/02/23 Date of Issue 2023/06/02 Report Version V1.0 Report No.: 2320693R-RFUSV17S-A Page: 2 of 7 Competences and Guarantees DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. General conditions 1. The test results relate only to the samples tested. 2. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. 3. This report must not be used to claim product endorsement by TAF or any agency of the government. 4. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. 5. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 2320693R-RFUSV17S-A Page: 3 of 7 Revision History Report No. Ve r s i o n Description Issued Date 2320693R-RFUSV17S-A V1.0 Initial issue of report. 2023/06/02 Report No.: 2320693R-RFUSV17S-A Page: 4 of 7 1. General Information 1.1. EUT Description Product Name Booking Device Trademark Humly, GOBRIGHT Model and /or type reference HUM1020, INT1 Contain Module ESPRESSIF / ESP32-S3-WROOM-1 FCC ID: 2AC7Z-ESPS3WROOM1 Note: For more detailed information please refer to report No.: 2320693R-RFNAV03S-3, 2320693R-RFNAV03S-4 and 2320693R-RFUSV07S-A. Report No.: 2320693R-RFUSV17S-A Page: 5 of 7 2. Test Facility USA FCC Registration Number: TW0033 Canada CAB Identifier Number: TW3023 / Company Number: 26930 Site Description Accredited by TAF Accredited Number: 3023 Test Laboratory DEKRA Testing and Certification Co., Ltd. Linkou Laboratory Address No.5-22, Ruishukeng Linkou District, New Taipei City, 24451, Taiwan, R.O.C Performed Location No. 26, Huaya 1st Rd., Guishan Dist.,Taoyuan City 333411, Taiwan, R.O.C. Phone Number +886-3-275-7255 Fax Number +886-3-327-8031 Report No.: 2320693R-RFUSV17S-A Page: 6 of 7 3. RF Exposure Evaluation 3.1. Standard Applicable According to KDB 447498 D01 (7.1), A minimum test separation distance ≥ 20 cm is required between the antenna and radiating structures of the device and nearby persons to apply mobile device exposure limits. 3.2. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/ Uncontrolled Exposures 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneously transmitting antennas incorporated in a host device is ≤ 1.0 Report No.: 2320693R-RFUSV17S-A Page: 7 of 7 3.3. Test Result of RF Exposure Evaluation Product Booking Device Test Item RF Exposure Evaluation Band Frequency (MHz) Tune-up output power (dBm) Tune-up output power (mW) Tune-up E.I.R.P (dBm) Tune-up E.I.R.P (mW) Tune-up output power Power density at R = 20 cm (mW/cm2) Limit (mW/cm2) Bluetooth LE 2402 12 15.849 8.530 7.129 0.003 1 2.4 GHz 2412 18 63.096 14.530 28.379 0.013 1 Band Frequency (MHz) Field strength (dBuV/m) E.I.R.P (dBm) E.I.R.P (mW) Power density at R = 20 cm (mW/cm2) Limit (mW/cm2) RF ID 13.56 59.20 -36.030 0.00025 0.00000005 1 Note: 1. 2.4G Antenna Gain = -3.47 dBi 2. The conducted output power is refer to module certificate. Calculations for Multi-Transmitter Mode Ratios Result Limit Bluetooth 0.003 0.01600005 1 WLAN 0.013 RF ID 0.00000005 Ratios = Power Density / P…

Text truncated - open the document above for the full version.

87654321 E F D C B A 背膠 鍍金PAD HRI_NFC HF_YYWW See Detail A 總厚度 補強板提把 停止記號線 NFC 連騰科技股份有限公司 TheMostAppropriateAntennaforYourDesign! AdvancedWireless &AntennaInc. AWANNFCTESTREPORT FORHRINFC AdvancedWireless&AntennaINC. WirelessCommunicationsBU 2023.03.09 AdvancedWireless&AntennaInc.AdvancedWireless&AntennaInc.AdvancedWireless&AntennaInc. Index www.awan-ant.com2 ➢TestEquipment ➢TestEnvironment ➢MatchingDesign ➢ReaderDistance AdvancedWireless&AntennaInc.AdvancedWireless&AntennaInc.AdvancedWireless&AntennaInc. ProcedureEquipmentName&Photo Antenna Tuning NetworkAnalyzer:KEYSIGHT Reader Distance AltimeterTestCard TestEquipment www.awan-ant.com3 AdvancedWireless&AntennaInc.AdvancedWireless&AntennaInc.AdvancedWireless&AntennaInc. PanelTopView:PanelBotView: www.awan-ant.com4 TestEnvironment NFCSize70X25mm AdvancedWireless&AntennaInc.AdvancedWireless&AntennaInc.AdvancedWireless&AntennaInc. MatchingDesign-20.6Ω ImpedanceMatching C28、C39100pF C27、C40NC C34、C3756pF C35、C38NC AntennaMatching: SmithChart:DVT SmithChart:EVT www.awan-ant.com5 AdvancedWireless&AntennaInc.AdvancedWireless&AntennaInc.AdvancedWireless&AntennaInc. ReaderDistance TestEnvironmentDefine: NFCReader 0º NFCReader TestCard 90º NFCtags/Testconditions Distance(mm) Z=0mmZ=5mmZ=10mm20.6Ω 0°/90°0°/90°0°/90°0°/90° TYPE2,Mifare Classic-4KPASS/PASSPASS/PASSPASS/PASS45/45 TYPE2,MifarePlusS-4KPASS/PASSPASS/PASSPASS/PASS30/25 TYPE3,Sony,Felica S966PASS/PASSPASS/PASSPASS/PASS30/30 TYPE4,MifareDesfire-4K PASS/PASSPASS/PASSPASS/PASS 28/23 TYPE4B,ISO14443-B PASS/PASSPASS/PASSPASS/PASS 20/15 TYPE5,ICODE-NXP,ISO15693 PASS/PASSPASS/PASSPASS/PASS 55/55 TYPE5,ILRiSK-STM,ISO15693 PASS/PASSPASS/PASSPASS/PASS 55/55 Z=0 NFCReader Test Card TestCard www.awan-ant.com6

Report No.: 2320693R-RFUSV07S-A Page: 1 of 24 Test report No.: 2320693R-RFUSV07S-A TEST REPORT Product Name Booking Device Trademark Humly, GOBRIGHT Model and /or type reference HUM1020, INT1 FCC ID 2BAZS-HUM1020 Applicant ́s name / address Humly Solutions AB Sveav. 124, 113 50 Stockholm, Sweden Manufacturer ́s name Humly Solutions AB Test method requested, standard FCC CFR Title 47 Part 15 Subpart C ANSI C63.4: 2014, ANSI C63.10: 2013 Verdict Summary IN COMPLIANCE Documented By (Senior Project Specialist / April Chen) Tested By (Senior Engineer / Ivan Chuang) Approved By (Senior Engineer / Jack Hsu) Date of Receipt 2023/02/23 Date of Issue 2023/06/02 Report Version V1.0 Report No.: 2320693R-RFUSV07S-A Page: 2 of 24 INDEX Page 1. General Information ........................................................................................................................ 5 1.1. EUT Description ...................................................................................................................................... 5 1.2. Tested System Datails .............................................................................................................................. 6 1.3. Configuration of tested System ............................................................................................................... 6 1.4. EUT Exercise Software ........................................................................................................................... 6 1.5. Test Facility ............................................................................................................................................. 7 1.6. List of Test Equipment ............................................................................................................................. 8 1.7. Uncertainty .............................................................................................................................................. 9 2. Conducted Emission ......................................…

Text truncated - open the document above for the full version.