2BB8YSTRIKERStriker Pro

Striker Pro说明书 （Striker Pro Quick Start Guide） 一.感谢您购买Striker Pro，选择绝佳的鼠标体验，本手册旨在让您尽快使用Striker Pro，更多功能及视频教程请参考： （Thank you for purchasing Striker Pro and choosing an exceptional mouse experience. This Quick Start Guide is designed to help you get started with Striker Pro quickly. For more features and video tutorials, please refer to:） 二.本产品请配合我们的app使用，以调整最合适的灵敏度，或其他设备参数.(Please use this product with our app to adjust the sensitivity or other device parameters to the most appropriate level.) 三.StrikerPro是一款全能型转换器，支持主流的主机类型。同时支持Geekvice app对鼠标各项专业参数自定义，多 配置一键切换等功能。(Striker Pro is a versatile converter that supports popular gaming console types. It also features support for the GeekVice app, allowing users to customize various professional parameters of their mouse. Additionally, it offers a Single‐button switch for multiple configurations.） 四.StrikerPro是一个社区驱动的项目，如果您遇到任何问题或者有一些有趣的想法请积极联系我们。（Striker Pro is a community‐driven project. If you encounter any issues or have some interesting ideas, please feel free to contact us actively.） （邮箱图标）：[email protected] youtube(图标)：@AIMZENIXtiktok（图标）：@Aimzenixtech 五.开始前请确保您运行的是我们最新的固件以及最新app版本，其中包含我们最新的修复程序和功能升级，固件更 新请在我们的app上按提示进行升级。（Before you begin, please make sure that what you are running are our latest firmware and the latest app version, including our latest bug fixes and feature upgrades. For firmware updates, please follow the prompts in our app to upgrade.） 支持设备(Console Compatible) "P4", "P3", "Xss/x", "X360", "Xone", "NS". 产品及配件（What's in the box） OTG转接头（图片）USB‐type c线（图片）Quick Start Guide（图片） 接口以及按键说明：（Striker Pro） 请注意：额外供电口不能接主机，否则会导致连接失败（Please note that: The Extra power port cannot be connected to the console, as this may result in a connection failure.） 1. Switch 模式切换：接入 NS 主机后，连按两次按钮切换至 NS 模式 2. 开光 RGB 灯光：按下一次按钮开关灯光 3. 关机：长按 4s 即可关闭电源 4. 复位：长按 10S ，即可对设备进行复位。 1. Switch Mode Switching: After connecting to the Switch console, press the button twice to switch to NS mode. 2. RGB Light Control: Press the button once to toggle the lighting on/off. 3. Power Off: Press and hold for 4 seconds to power off. 4. Reset: Press and hold for 10 seconds to reset the device. 开始使用（ Getting started ） 一、与P4,P3,Xseriess/x,Xone,X360连接方式 (To connect with the "P4", "P3", "Xs/x", "Xone", "X360") 请注意： 需使用与主机设备对应的原厂手柄进行连接（原装手柄=Original controller）同时在主机端选择连接方法（官 方用词：Communication Method），使用USB连接线（官方用词：Use USB Cable） Device connection requires the original controller corresponding to the host device. Additionally, please ensure that the Communication Method on the Switch console is set to Use USB Cable 指示灯变为蓝色长亮表示与PS主机配对成功，指示灯变为绿色长亮表示与xbox主机配对成功 （The indicator light staying solid blue represents successful pairing with the PS console，The indicator light staying solid green represents pairing successfully with the Xbox console.） 三、与NS连接方式(To connect with the NS) 注意：与NS连接需在设置‐手柄与感应器中开启pro手柄的有线连接 （Note:You need to turn on the Pro Controller Wired Communication in the system settings‐Controllers and Sensors.） 连接成功后可以通过快速按两次按钮切换至Swich无手柄模式，或通过app选择Switch主机（After connected successfully, you can switch to Switch mode by quickly pressing the button on the device twice, or selecting the Switch console via the app.） 指示灯变为红色长亮模式表示与NS主机配对成功 （The continuous solid red light indicates pairing with the NS console successfully.） 四.与PC连接方式（Mode of connecting to the PC） 按键映射（ Button Mapping ） FCCStatement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

1/1 LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: UUX GROUP INC FRN:0033701590 Contact Name:Jack Fu Address:36 South 18th Avenue, Suite A Brighton, CO USA Telephone No:001-719-6787182 Email: [email protected] Applicant: Company name: SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD Product Description: Strike Pro Grantee code:2BB8Y FCC ID:2BB8YSTRIKER FRN：0034052530 Contact Name:Jingwen Xu Address:501, No. 5 Ind. 2nd Rd, Dakan Ind. Area, Dakan Cmty, Xili St., Nanshan Dist., Shenzhen, Guangdong, China Telephone No:17694807957 Email: [email protected] [SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD] certifies that, as of the date of this filing of the application with the TCB, [UUX GROUP INC]is our designated US agent for service of process for the above referenced FCC ID. [SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [UUX GROUP INC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. UUX GROUP INCis aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. 1/1 Date: 2024/01/02 Applicant’s Name:Jingwen XuUS Agent’s Name:Jack Fu Title:Manage rTitle:General Manager SignatureSignature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD Grantee code: 2BB8Y FCC ID:2BB8YSTRIKER Contact Name: Jingwen Xu Address:501, No. 5 Ind. 2nd Rd, Dakan Ind. Area, Dakan Cmty, Xili St., Nanshan Dist., Shenzhen, Guangdong, China Telephone No:17694807957 Fax No:17694807957 Email: [email protected] i.[SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment . Date: 2024/01/02 Applicant’s Name:Jingwen Xu Title:Manager Signature 1 The Commission’sCovered Listis published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment.https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 Letter of Authorization SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD Company:SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD Address: 501, No. 5 Ind. 2nd Rd, Dakan Ind. Area, Dakan Cmty, Xili St., Nanshan Dist., Shenzhen, Guangdong, China Product Name:Striker Pro Model Number:STRIKER_V03 FCC Identifier: 2BB8YSTRIKER We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name:Jingwen XuDate: 2024-01-02 Title:Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-01-02 Subject: Request for Confidentiality FCC ID: 2BB8YSTRIKER To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/LocationNoNo Attestation StatementNoNo External PhotosNo ☒ Block Diagram ☒☐ Schematics ☒☐ Test ReportNoNo Test Setup PhotosNo ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐☐ RF Exposure InfoNoNo Operational Description ☒☐ Cover Letter(s)NoNo SDR Software / Security Info ☐ No NOTE 1: Long‐Term Confidentiality may be permitted under special conditions (SeeII. LONG‐TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short‐Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ___180___ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Nam e: Jingwen Xu Title: Manager

ExternalPhotos

Lable: Striker Pro Model ： STRIKER_V03 FCC ID: 2BB8YSTRIKER

Internal Photos BTANT

FCC ID: 2BB8YSTRIKER RF Exposure E valuation KDB447498 D01: Mobile and Portable Devices RF Exposure v06 P rocedures andEquipmentAuthorizationPolicies Limits The cr iter ia listed in the following table shall be used to evaluate the envir onment impact of human ex posure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f = frequency in MHz Friis transmission formula:Pd = (Pout*G)/(4*pi*r 2 ) Where Pd= power density in mW/cm 2 ,Pout= output power to antenna in mW; G= gain of antenna in linear scale,Pi= 3.1416; R= distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation So a SAR test is not required Modulation Frequenc y MHz Output power to antenna (dBm) Target power W/toler ance (dBm） Max Output power to antenna (dBm) Max Output power to antenna (mW) Power Density at R=20cm (mW/cm2) Limit (mW/c m2) Result BTBLE 24020.080±111.2590.000388 1.0PASS 2440-0.16 0±1 11.2590.000388 1.0PASS 2480-0.06 0±1 11.2590.000388 1.0PASS

Product specification Quick Reference Date Antenna module on the system board Frequenc Range 2400 ~ 2500MHz Ant. Port Input Pwr. (dBm) 0 (Typ. BT class 2 output power) Tot. Rad. Pwr. (dBm) -1.2 (Input pwr – loss pwr) Peak EIRP(dBm) 1.68 Directivity (dBi) 1 (all direction antenna) Efficiency (dB) 6 0.2 % Gain (dBi) -0.5 (Avg Gain XY-plane) Maximum Power (dBm) 1.7 (XY-plane) Minimum Power (dBm) -4(XY-plane) Avg. Power (dBm) -0.5(XY-plane) Input Impendence(ohm) 50 Polarization Type V ertical & Horizontal V . S .W . R < 1.4 All the technical data and information contained herein are subject to ch ange without prior notice Antenna Layout & module on the system board Antenna Gain Gain Table Unit in dBi @2.44GHz XY-plane XZ-plane YZ-plane Efficiency Peak Avg. Peak Avg. Peak Avg. Module Board 1.35-0.51.68-3.61.11-3.06 0.2 % Manufacturer：Lenze Design Inc Address ： 7th Floor,Ching Po Building,Shenzhen Special Zone Press Group,Futian L1=6mm L2=5.5mm L3=3mm L4=2.5mm L5=1.5mm D1=5mm D2=3mm D3=3mm D4=1.3mm D5=2.3mm Retum Loss The Environment of Antenna Radiation Pattem 3D radiation pattern diagram XY-plane XZ-plane YZ-plane

FCC TEST REPORT FCC ID: 2BB8YSTRIKER Product:Striker Pro Model Name :STRIKER_V03 Brand:AIMZENIX Report No.:NCT23052326E Prepared for SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD 501, No. 5 Ind. 2nd Rd, Dakan Ind. Area, Dakan Cmty, Xili St., Nanshan Dist., Shenzhen, Guangdong, China Prepared by Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, People’s Republic of China TEL: 400-8868-419 FAX: 86-755-27790922 ReportNo.:NCT23052326E Page 2 of 46 Hotline: 400-8868-419Fax: 86-755-27790922http://www.ncttesting.cn 1 TEST RESULT CERTIFICATION Applicant’s name: SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD Address: 501, No. 5 Ind. 2nd Rd, Dakan Ind. Area, Dakan Cmty, Xili St., Nanshan Dist., Shenzhen, Guangdong, China Manufacture's name : SHENZHEN FENGYISHULIAN TECHNOLOGY CO., LTD Address: 501, No. 5 Ind. 2nd Rd, Dakan Ind. Area, Dakan Cmty, Xili St., Nanshan Dist., Shenzhen, Guangdong, China Product name: Striker Pro Model name: STRIKER_V03 Standards: FCC CFR47 Part 15 Section 15.247 Test procedure: ANSI C63.10:2013 Date of test: Dec. 25, 2023-Jan. 01, 2024 Date of Issue: Jan. 02, 2024 This device described above has been tested by NCT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NCT, this document may be altered or revised by NCT, personal only, and shall be noted in the revision of the document. Test Engineer: Keven Wu / Engineer Technical Manager: Henry Wang / Manager ReportNo.:NCT23052326E Page 3 of 46 Hotline: 400-8868-419Fax: 86-755-27790922http://www.ncttesting.cn Contents Page 1 TEST RESULT CERTIFICATION...............................................................................................................................2 2 TEST SUMMARY.......................................................................................................................................................... 5 2.1 T ESTSITE............................................................................................................................................................6 3 GENERAL INFORMATION..........................................................................................................................................7 3.1 G ENERALDESCRIPTION OFE.U.T.....................................................................................................................7 3.2 C HANNELLIST..................................................................................................................................................... 8 3.3 T ESTSETUPCONFIGURATION............................................................................................................................9 3.4 T ESTMODE......................................................................................................................................................... 9 4 EQUIPMENT DURING TEST.................................................................................................................................... 10 4.1 E QUIPMENTSLIST............................................................................................................................................. 10 4.2 M EASUREMENTUNCERTAINTY......................................................................................................................... 12 4.3 D ESCRIPTION OFSUPPORTUNITS...................................................................................................................12 5 CONDUCTED EMISSION.......................................................................................................................................... 13 5.1 E.U.T. O PERATION............................................................................................................................................13 5.2 EUT S ETUP....................................................................................................................................................... 13 5.3 T ESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION)................................................................................. 14 5.4 M EASUREMENTPROCEDURE............................................................................................................................14 5.5 C ONDUCTEDEMISSIONLIMIT........................................................................................................................... 14 5.6 M EASUREMENTDESCRIPTION.......................................................................................................................... 14 5.7 C ONDUCTEDEMISSIONTESTRESULT.............................................................................................................14 6 RADIATED SPURIOUS EMISSIONS...................................................................................................................... 17 6.1 EUT O PERATION...............................................................................................................................................17 6.2 T ESTSETUP...................................................................................................................................................... 18 6.3 S PECTRUMANALYZERSETUP.......................................................................................................................... 19 6.4 T ESTPROCEDURE.............................................................................................................................................20 6.5 S UMMARY OFTESTRESULTS...........................................................................................................................23 7 CONDUCT BAND EDGE AND SPURIOUS EMISSIONS MEASUREMENT.................................................…

Text truncated - open the document above for the full version.