2BB9P000014K Wireless Conferencing System

Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 10-10-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2BB9P00001 [Changsha Langyuan Electronics Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Guangyang Wang Title: Lab. Manager Address: 15/F, Building B1, NO.11, Guangpu Road, Huangpu District,Guangzhou, Guangdong, P.R. China Tel.: +86-15763789442 Email: [email protected]

Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 10-10-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2BB9P00001 [Changsha Langyuan Electronics Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Guangyang Wang Title: Lab. Manager Address: 15/F, Building B1, NO.11, Guangpu Road, Huangpu District,Guangzhou, Guangdong, P.R. China Tel.: +86-15763789442 Email: [email protected]

Standard Form Sample Agency Request Letter Number:MS-0004558 Version:2.1 Page:1 of 1 Printed: November 21, 2023 Approved Documents Valid 2 Days Verify as current revision when invalid. This document is issued in strict confidence and shall not be reproduced, copied, or otherwise used without the expressed written consent of the Management of TÜV Rheinland Industrial Solutions, Inc. The following is a sample Agency Request letter, which needs to be completed on company letterhead, signed by an authorized Applicant/Agent, and submitted to TÜV Rheinland. Authority to Act as Agent Date: __2023/11/02______ TUV Rheinland of North America, Inc. 1279 Quarry Ln., Ste. A Pleasanton, CA 94566 To Whom It May Concern: I appoint Mr. Storm Shu to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with _Changsha Langyuan Electronics Technology Co., Ltd. _Building A20, Section II, Zhongdian Software Park, No. 18, Jianshan Road, High-tech Development District, Changsha,Hunan,P.R. China For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:_____( 12 months)_____ By:__________________________ _Guangyang Wang_ (Signature) (Print name) Title:_______Lab. Manager______ Telephone:____+86-15763789442____ On behalf of:Changsha Langyuan Electronics Technology Co., Ltd. (Company Name)

Request for Confidentiality Letter MS-0005105Page 1 of 1Version 2.0 Changsha Langyuan Electronics Technology Co., Ltd. Date: __2023/11/02______ Subject: Confidentiality Request for FCC ID: ______2BB9P00001______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality RequestedExhibit Short Term PermanentBlock Diagrams Short Term n/aExternal Photo Short Term PermanentInternal Photos *** Short Term PermanentOperation Description/Theory of Operation Short Term PermanentSchematics Short Term PermanentTest Setup*** Short Term PermanentSoftware Security Description Short Term PermanentUser’s Manual*** Short Term PermanentPart List/ Antenna Gain Information Datasheet ______Changsha Langyuan Electronics Technology Co., Ltd.______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:___________________________________Guangyang Wang____________ (Signature/Title)(Print name)

TypeDifferenceStatement M1S,ST100,TXX1XX(Xisavariable,X=AtoZ,0to9orblank)Thereisnodifferencein hardwaredesignandRFdesignoftheabovemodels.Differentmodelnamesaremarketingneeds. Signature: PrintName:GuangyangWang Date:2023-11-21 ChangshaLangyuanElectronicsTechnologyCo.,Ltd.

Photo Documentation Page 1 of 2 Report No.: CN2PS6G 001 Product: 4K Wireless Conferencing System Type Designation: M1S Figure 1 Top overall view Figure 2 Bottom overall view Photo Documentation Page 2 of 2 Report No.: CN2PS6G 001 Product: 4K Wireless Conferencing System Type Designation: M1S Figure 3 Overall side view

Photo Documentation Page 1 of 3 Report No.: CN2PS6G 001 Product: 4K Wireless Conferencing System Type Designation: M1S Figure 1 Internal overall view Figure 2 Internal overall view Photo Documentation Page 2 of 3 Report No.: CN2PS6G 001 Product: 4K Wireless Conferencing System Type Designation: M1S Figure 3 Mainboard view Figure 4 Mainboard view Photo Documentation Page 3 of 3 Report No.: CN2PS6G 001 Product: 4K Wireless Conferencing System Type Designation: M1S Figure 5 Shield-off view

Test Report – Products Prüfbericht - Produkte Test report no.: Prüfbericht-Nr.: CN2PS6G 002 Order No.: Auftragsnr.: 168436838 Page 1 of 9 Seite 1 von 9 Client reference no.: Kunden-Referenz-Nr.: N/A Order date: Auftragsdatum: 2023-07-26 Client: Auftraggeber: Changsha Langyuan Electronics Technology Co., Ltd. Building A20, Section II, Zhongdian Software Park, No. 18, Jianshan Road, High-tech Development District, Changsha,Hunan,P.R. China Test item: Prüfgegenstand: 4K Wireless Conferencing System Identification / Type no.: Bezeichnung / Typ-Nr.: M1S, ST100, TXX1XX(X is a variable, X = A to Z, 0 to 9 or blank) Order content: Auftrags-Inhalt: Test Report Test specification Prüfgrundlage: 47 CFR FCC Part 2.1091 Date of sample receipt: Wareneingangsdatum: 2023-07-30 Please refer to Photo Document Test sample no: Prüfmuster-Nr.: A003521890-003,004 A003534880-001 Testing period: Prüfzeitraum: 2023-07-30 - 2023-10-08 Place of testing: Ort der Prüfung: Refer to section 2.1 Testing laboratory: Prüflaboratorium: TÜV Rheinland (Shenzhen) Co., Ltd. Test result*: Prüfergebnis*: Pass tested by: geprüft von: X Signed by: Bell Hu authorized by: genehmigt von: X Signed by: Jonathan Li Date: 2023-11-21 Datum: Issue date: 2023-11-21 Ausstellungsdatum: Position / Stellung: Expert/Sachverständige(r) Position / Stellung: Expert/Sachverständige(r) Other: Sonstiges: FCC ID: 2BB9P00001 Condition of the test item at delivery: Zustand des Prüfgegenstandes bei Anlieferung: Test item complete and undamaged Prüfmuster vollständig und unbeschädigt * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. V05 TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] ∙ Web: www.tuv.com Test Report - Products Prüfbericht - Produkte Test report no.: CN2PS6G 002 Prüfbericht-Nr.: Page 2 of 9 Seite 2 von 9 Remarks Anmerkungen 1 The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. 2 As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. 3 Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. 4 The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard mentioned on Page 1 of this report or requested by the customer. This means that measurement uncertainty is not taken in account and hence also not declared in the test report. For additional information to the resulting risk based of this decision rule please refer to ILAC G8:2019. Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es …

Text truncated - open the document above for the full version.

2.4/5GHz 3216 Chip Antenna: ANT3216R24503KL1 1 / 7 Applications: WLAN, 802.11a, b, c/g, etc... Features SMD, high reliability, ultra compact, Omni-directional... Part number ANT 3216 R 2450 3K L1 (1) (2) (3) (4) (5) (1) Size Code 3.2x1.6mm (2) Packing Tape and reel (3) Frequency 2.4GHz/5GHz (4) Packing Number 3K (5) Code L1 Electrical Specification Working Frequency Range 2400 ~2484 MHz 5150~5850 MHz Peak Gain 2.8 dBi (Typ.) 5.3 dBi (Typ) Impedance 50 Ohm VSWR 2.5 (Max) Polarization Linear Azimuth Beamwidth Omni-directional Operation Temperature(°C) -40~85°C The specification is defined on EVB. Dimension and Terminal Configuration Dimension (mm) No. Terminal Name L 3.20+-0.15 1 Ground W 1.60+-0.15 2 Feeding T 0.55+-0.10 3 Ground D1 0.50+-0.15 D2 1.10+-0.15 D3 0.50+-0.15 2.4/5GHz 3216 Chip Antenna: ANT3216R24503KL1 2 / 7 Evaluation Board Reference PCB Dimension Antenna Layout Reference Unit : mm : Chip Antenna : Land Pattern Matching circuit 2.4 Ele VSW Rad 4/5GHz ectrical C WR&Effic diation Pa 3216 Ch Characte iency attern hip Ant eristics enna: AANT32166R245003KL1 X Z Y 3 / 7 2.4/5GHz 3216 Chip Antenna: ANT3216R24503KL1 4 / 7 Frequency=2440MHz ZX-Plane ZY-Plane XY-Plane 2.4/5GHz 3216 Chip Antenna: ANT3216R24503KL1 5 / 7 Frequency=5500MHz ZX-Plane ZY-Plane XY-Plane 2.4/5GHz 3216 Chip Antenna: ANT3216R24503KL1 6 / 7 Taping Specifications Reel and Taping Specification Reel Specification TYPE SIZE A ψB ψC ψD W ψM 3216 7” 3K/Reel 2.0±0.5 13.5±1.0 21±1.0 60±1.0 11.5±2.0 178±2.0 Taping Specification Packaging Type A B W E F G H T ψD P Paper Type 3216 1.90±0.20 3.50±0.20 8.0±0.20 1.75±0.10 3.5±0.05 4.0±0.10 2.0±0.05 0.75±0.10 +0.10 1.50 -0 4.0±0.1 2.4/5GHz 3216 Chip Antenna: ANT3216R24503KL1 7 / 7 Recommended Reflow Profile Pb free solder Soaking Working Soldering Peak Temp. Time Temp. Time Temp. Time Temp. T1 T2 t1 T3 t2 T4 t3 T5 150°C 180°C 60 to 120sec 230°C more than 30sec 247 to 253°C within 10sec 260°C Max. Sept 2022 Ver.H01

Test Report – Products Prüfbericht - Produkte Test report no.: Prüfbericht-Nr.: CN2PS6G 001 Order No.: Auftragsnr.: 168436838 Page 1 of 28 Seite 1 von 28 Client reference no.: Kunden-Referenz-Nr.: N/A Order date: Auftragsdatum: 2023-07-26 Client: Auftraggeber: Changsha Langyuan Electronics Technology Co., Ltd. Building A20, Section II, Zhongdian Software Park, No. 18, Jianshan Road, High-tech Development District, Changsha,Hunan,P.R. China Test item: Prüfgegenstand: 4K Wireless Conferencing System Identification / Type no.: Bezeichnung / Typ-Nr.: M1S, ST100, TXX1XX(X is a variable, X = A to Z, 0 to 9 or blank) Order content: Auftrags-Inhalt: Test Report Test specification Prüfgrundlage: CFR47 FCC Part 15: Subpart E Section 15.407 Date of sample receipt: Wareneingangsdatum: 2023-07-30 Please refer to Photo Document Test sample no: Prüfmuster-Nr.: A003521890-003,004 A003534880-001 Testing period: Prüfzeitraum: 2023-07-30 - 2023-10-08 Place of testing: Ort der Prüfung: Refer to section 2.1 Testing laboratory: Prüflaboratorium: TÜV Rheinland (Shenzhen) Co., Ltd. Test result*: Prüfergebnis*: Pass tested by: geprüft von: X Signed by: Bell Hu authorized by: genehmigt von: X Signed by: Jonathan Li Date: 2023-11-21 Datum: Issue date: 2023-11-21 Ausstellungsdatum: Position / Stellung: Expert/Sachverständige(r) Position / Stellung: Expert/Sachverständige(r) Other: Sonstiges: FCC ID: 2BB9P00001 Condition of the test item at delivery: Zustand des Prüfgegenstandes bei Anlieferung: Test item complete and undamaged Prüfmuster vollständig und unbeschädigt * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. V05 TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] ∙ Web: www.tuv.com Test Report - Products Prüfbericht - Produkte Test report no.: CN2PS6G 001 Prüfbericht-Nr.: Page 2 of 28 Seite 2 von 28 Remarks Anmerkungen 1 The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. 2 As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. 3 Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. 4 The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard mentioned on Page 1 of this report or requested by the customer. This means that measurement uncertainty is not taken in account and hence also not declared in the test report. For additional information to the resulting risk based of this decision rule please refer to ILAC G8:2019. Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 un…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 1 of 223 Appendix A: Test Results of 5GHz Wi-Fi APPENDIX A: TEST RESULTS OF 5GHZ WI-FI ................................................................................................................... 1 APPENDIX A.1: TEST RESULTS OF CONDUCTED POWER SPECTRAL DENSITY ..................................................................................... 2 APPENDIX A.2: TEST RESULTS OF FREQUENCY STABILITY ........................................................................................................... 50 APPENDIX A.3: TEST RESULTS OF 26DB BANDWIDTH ............................................................................................................... 52 APPENDIX A.4: TEST RESULTS OF 99% BANDWIDTH ................................................................................................................. 71 APPENDIX A.5: TEST RESULTS OF 6DB BANDWIDTH ................................................................................................................. 95 APPENDIX A.6: TEST RESULTS OF RADIATED SPURIOUS EMISSIONS ........................................................................................... 101 30MHz - 1GHz (Worst case) ..................................................................................................................................... 101 1GHz - 18GHz ............................................................................................................................................................ 103 APPENDIX A.7: TEST RESULTS OF DYNAMIC FREQUENCY SELECTION (DFS) ................................................................................ 215 DFS Detection Thresholds ........................................................................................................................................ 215 Channel Move Time and Channel Closing Transmission Time ................................................................................ 217 Non-Occupancy Period ............................................................................................................................................. 220 APPENDIX A.8: TEST RESULTS OF CONDUCTED EMISSION ........................................................................................................ 222 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 2 of 223 Appendix A.1: Test Results of Conducted Power Spectral Density TestMode Antenna Channel Result [dBm/MHz for U-NII-1, U-NII-2A, U-NII-2C; dBm/500KHz] for U-NII-3 Limit[dBm/MHz] Verdict 11A Ant1 5180 2.3 ≤11.00 PASS Ant2 5180 7 ≤11.00 PASS Ant1 5200 2.67 ≤11.00 PASS Ant2 5200 6.55 ≤11.00 PASS Ant1 5240 2.54 ≤11.00 PASS Ant2 5240 5.44 ≤11.00 PASS Ant1 5260 1.83 ≤11.00 PASS Ant2 5260 4.82 ≤11.00 PASS Ant1 5280 1.98 ≤11.00 PASS Ant2 5280 4.76 ≤11.00 PASS Ant1 5320 -0.9 ≤11.00 PASS Ant2 5320 1.5 ≤11.00 PASS Ant1 5500 -4.18 ≤11.00 PASS Ant2 5500 0.56 ≤11.00 PASS Ant1 5580 -0.81 ≤11.00 PASS Ant2 5580 4.08 ≤11.00 PASS Ant1 5700 0.26 ≤11.00 PASS Ant2 5700 5.8 ≤11.00 PASS Ant1 5720 -2.33 ≤11.00 PASS Ant2 5720 3.97 ≤11.00 PASS Ant1 5745 0.65 ≤30.00 PASS Ant2 5745 4.63 ≤30.00 PASS Ant1 5785 -1.34 ≤30.00 PASS Ant2 5785 2.62 ≤30.00 PASS Ant1 5825 0.69 ≤30.00 PASS Ant2 5825 4.31 ≤30.00 PASS 11N20MIMO Ant1 5180 1.39 ≤11.00 PASS Ant2 5180 5.27 ≤11.00 PASS total 5180 6.76 ≤8.70 PASS Ant1 5200 1.53 ≤11.00 PASS Ant2 5200 4.48 ≤11.00 PASS total 5200 6.26 ≤8.70 PASS Ant1 5240 1.13 ≤11.00 PASS Ant2 5240 4.16 ≤11.00 PASS total 5240 5.91 ≤8.70 PASS Ant1 5260 0.54 ≤11.00 PASS Ant2 5260 3.6 ≤11.00 PASS total 5260 5.34 ≤8.70 PASS Ant1 5280 -3.69 ≤11.00 PASS Ant2 5280 -1.65 ≤11.00 PASS total 5280 0.46 ≤8.70 PASS Ant1 5320 -3.84 ≤11.00 PASS Ant2 5320 -1.68 ≤11.00 PASS total 5320 0.38 ≤8.70 PASS Ant1 5500 -6.12 ≤11.00 PASS Ant2 5500 -1 ≤11.00 PASS total 5500 0.16 ≤8.70 PASS Ant1 5580 -1.51 ≤11.00 PASS Ant2 5580 3.11 ≤11.00 PASS total 5580 4.40 ≤8.70 PASS Ant1 5700 -0.33 ≤11.00 PASS Ant2 5700 5.33 ≤11.00 PASS total 5700 6.37 ≤8.70 PASS Ant1 5720 -2.81 ≤11.00 PASS Ant2 5720 3.44 ≤11.00 PASS total 5720 4.36 ≤8.70 PASS Ant1 5745 -0.5 ≤30.00 PASS Ant2 5745 3.21 ≤30.00 PASS Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 3 of 223 total 5745 4.75 ≤27.70 PASS Ant1 5785 -0.02 ≤30.00 PASS Ant2 5785 3.64 ≤30.00 PASS total 5785 5.19 ≤27.70 PASS Ant1 5825 -0.05 ≤30.00 PASS Ant2 5825 3.88 ≤30.00 PASS total 5825 5.36 ≤27.70 PASS 11N40MIMO Ant1 5190 -2.37 ≤11.00 PASS Ant2 5190 2 ≤11.00 PASS total 5190 3.35 ≤8.70 PASS Ant1 5230 -1.38 ≤11.00 PASS Ant2 5230 1.83 ≤11.00 PASS total 5230 3.53 ≤8.70 PASS Ant1 5270 -2.23 ≤11.00 PASS Ant2 5270 0.85 ≤11.00 PASS total 5270 2.59 ≤8.70 PASS Ant1 5310 -8.28 ≤11.00 PASS Ant2 5310 -7.44 ≤11.00 PASS total 5310 -4.83 ≤8.70 PASS Ant1 5510 -11.44 ≤11.00 PASS Ant2 5510 -5.76 ≤11.00 PASS total 5510 -4.72 ≤8.70 PASS Ant1 5550 -2.9 ≤11.00 PASS Ant2 5550 2.08 ≤11.00 PASS total 5550 3.28 ≤8.70 PASS Ant1 5670 -1.68 ≤11.00 PASS Ant2 5670 3.77 ≤11.00 PASS total 5670 4.86 ≤8.70 PASS Ant1 5710 -5.65 ≤11.00 PASS Ant2 5710 0.51 ≤11.00 PASS total 5710 1.45 ≤8.70 PASS Ant1 5755 -3.31 ≤30.00 PASS Ant2 5755 0.56 ≤30.00 PASS total 5755 2.05 ≤27.70 PASS Ant1 5795 -2.84 ≤30.00 PASS Ant2 5795 1.28 ≤30.00 PASS total 5795 2.7 ≤27.70 PASS 11AC20MIMO Ant1 5180 1.15 ≤11.00 PASS Ant2 5180 6.04 ≤11.00 PASS total 5180 7.26 ≤8.70 PASS Ant1 5200 1.58 ≤11.00 PASS Ant2 5200 5.15 ≤11.00 PASS total 5200 6.73 ≤8.70 PASS Ant1 5240 1.1 ≤11.00 PASS Ant2 5240 4.49 ≤11.00 PASS total 5240 6.13 ≤8.70 PASS Ant1 5260 0.65 ≤11.00 PASS Ant2 5260 3.64 ≤11.00 PASS total 5260 5.41 ≤8.70 PASS Ant1 5280 -3.43 ≤11.00 PASS Ant2 5280 -0.9 ≤11.00 PASS total 5280 1.03 ≤8.70 PASS Ant1 5320 -3.86 ≤11.00 PASS Ant2 5320 -0.9 ≤11.00 PASS total 5320 0.88 ≤8.70 PASS Ant1 5500 -5.95 ≤11.00 PASS Ant2 5500 -0.35 ≤11.00 PASS total 5500 0.71 ≤8.70 PASS Ant1 5580 -1.43 ≤11.00 PASS Ant2 5580 3.96 ≤11.00 PASS total 5580 5.06 ≤8.70 PASS Ant1 5700 0.13 ≤11.00 PASS Ant2 …

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 21 of 223 11N20MIMO_Ant1_5745 11N20MIMO_Ant2_5745 11N20MIMO_Ant1_5785 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 22 of 223 11N20MIMO_Ant2_5785 11N20MIMO_Ant1_5825 11N20MIMO_Ant2_5825 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 23 of 223 11N40MIMO_Ant1_5190 11N40MIMO_Ant2_5190 11N40MIMO_Ant1_5230 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 24 of 223 11N40MIMO_Ant2_5230 11N40MIMO_Ant1_5270 11N40MIMO_Ant2_5270 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 25 of 223 11N40MIMO_Ant1_5310 11N40MIMO_Ant2_5310 11N40MIMO_Ant1_5510 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 26 of 223 11N40MIMO_Ant2_5510 11N40MIMO_Ant1_5550 11N40MIMO_Ant2_5550 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 27 of 223 11N40MIMO_Ant1_5670 11N40MIMO_Ant2_5670 11N40MIMO_Ant1_5710 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 28 of 223 11N40MIMO_Ant2_5710 11N40MIMO_Ant1_5755 11N40MIMO_Ant2_5755 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 29 of 223 11N40MIMO_Ant1_5795 11N40MIMO_Ant2_5795 11AC20MIMO_Ant1_5180 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 30 of 223 11AC20MIMO_Ant2_5180 11AC20MIMO_Ant1_5200 11AC20MIMO_Ant2_5200 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 31 of 223 11AC20MIMO_Ant1_5240 11AC20MIMO_Ant2_5240 11AC20MIMO_Ant1_5260 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 32 of 223 11AC20MIMO_Ant2_5260 11AC20MIMO_Ant1_5280 11AC20MIMO_Ant2_5280 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 33 of 223 11AC20MIMO_Ant1_5320 11AC20MIMO_Ant2_5320 11AC20MIMO_Ant1_5500 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 34 of 223 11AC20MIMO_Ant2_5500 11AC20MIMO_Ant1_5580 11AC20MIMO_Ant2_5580 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 35 of 223 11AC20MIMO_Ant1_5700 11AC20MIMO_Ant2_5700 11AC20MIMO_Ant1_5720

Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 36 of 223 11AC20MIMO_Ant2_5720 11AC20MIMO_Ant1_5745 11AC20MIMO_Ant2_5745 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 37 of 223 11AC20MIMO_Ant1_5785 11AC20MIMO_Ant2_5785 11AC20MIMO_Ant1_5825 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 38 of 223 11AC20MIMO_Ant2_5825 11AC40MIMO_Ant1_5190 11AC40MIMO_Ant2_5190 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 39 of 223 11AC40MIMO_Ant1_5230 11AC40MIMO_Ant2_5230 11AC40MIMO_Ant1_5270 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 40 of 223 11AC40MIMO_Ant2_5270 11AC40MIMO_Ant1_5310 11AC40MIMO_Ant2_5310 Prüfbericht - Produkte Test Report - Products Appendix A CN2PS6G 001 Page 41…

Text truncated - open the document above for the full version.