2BBAK-MACARONMini OBD2 Dongle

[Insert appropriate Disclaimer(s)] MACARON MINI OBD2 DONGLE USER MANUAL USER MANUAL Version <1.0> <07/12/2023> Macaron Mini OBD2 Dongle User Manual Page 2 of 6 VERSION HISTORY Version # Implemented By Revision Date Approved By Approval Date Reason 1.0 <Rain> 2023-07-12 Macaron Mini OBD2 Dongle User Manual Page 3 of 6 1 Download the DIMO App and register an account.  Please download the DIMO App in the app store.  Register an account with your gmail, Apple ID, or MetaMask Wallet.  Login into the DIMO App. 2 Connect the Macaron device to OBD2 port of the vehicle.  Install the Macaron to your vehicle’s OBD2 port. You can install it directly or via a CAN cable.  Verify that the lights on Macaron are on, and the blue light is blinking. 3 Pairing process.  When the blue light is blinking, you could start paring process.  Select ‘Connect Device’ and then select ‘Macaron’ in the DIMO App.  When prompted, scan the Macaron’s QR code on the side of the device.  Complete the pairing process by following the steps in the App. 4 Start driving and the device will collect the CAN data from your vehicle. Now enjoy your driving to earn with DIMO. 5 Manufacturing reports, device information and recycling instructions can be found in the DIMO website. Macaron Mini OBD2 Dongle User Manual Page 4 of 6 Declaration of Conformity Hereby, HashDog PET.LTD. declares that the radio equipment type Macaron of Mini OBD2 Dongle is in compliance with Directive 2014/53/EU and this product is allowed to be used in all EU member states. The full text of the EU declaration of conformity is available at the following internet address: www.hashdog.ai. UKCA DOC Hereby, HashDog PET.LTD. declares that the radio equipment type Macaron of Mini OBD2 Dongle is in compliance with the UK Radio Equipment Regulations SI 2017 No. 1206. The full text of the system UK declaration of conformity is available at: www.hashdog.ai. Manufacturer information: Company name: HASHDOG PTE. LTD. Address：152 BEACH ROAD #11-05, GATEWAY EAST, 189721 SINGAPORE Operation temperature: -40°C~85°C Operation frequency (Max power) Bluetooth: 2402-2480 (7.7dBm) Lora: 867MHz-869MHz (11.4dBm) RF exposure statement: RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC). Macaron Mini OBD2 Dongle User Manual Page 5 of 6 FCC regulatory conformance： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. RF Exposure The SAR limit adopted by FCC is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using in portable exposure conditions is 1.0W/kg. Macaron Mini OBD2 Dongle User Manual Page 6 of 6 IC regulatory conformance This device complies with CAN ICES-003 (B)/NMB-003(B). This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la norme CAN ICES-003 (B)/NMB-003 (B). Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF Exposure The SAR limit adopted by IC is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the IC for this device type complies with this limit. The highest SAR value reported to the IC for this device type when using in portable exposure conditions is 1.0W/kg. La limite SAR adoptée par IC est de 1.6 W / kg en moyenne par gramme de tissu. La valeur SAR la plus élevée rapportée à IC pour ce type d'appareil respecte cette limite. La valeur SAR la plus élevée rapportée à IC pour ce type d'appareil lorsqu'il est utilisé dans des conditions d'exposition portative est 1.0W / kg

HASHDOGPTE.LTD.ReferenceNo.2023U0109 2.911(d)(7)USAAgentv1.4 To: Federal Communications CommissionDate: 2023-07-013 7435 Oakland Mills Road Columbia, MD 21046 USA Section 2.911(d)(7) USAAgent for Service of Process We, [HASHDOG PTE.LTD.] (“the applicant”) designate [Agent located in theUnited States] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process inthe United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the granteehas permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Information Company Name:UA INTERNATIONAL INC. Address:5030 Boardwalk Dr, Suite 818, Colorado Springs, CO 80919, United States FRN:0033510736 Contact Person:Jessica Zhong Phone:(719) 678-7182 Email:[email protected] Signature Applicant Information Company Name:HASHDOG PTE.LTD. Address:152 BEACH ROAD #11-05, GATEWAY EAST, 189721 SINGAPORE FRN:0033794876 FCC ID:2BBAK-MACARON Contact Person:Shasha Song Phone:+8613681127852 HASHDOGPTE.LTD.ReferenceNo.2023U0109 2.911(d)(7)USAAgentv1.4 Email:[email protected] Signature Shasha Song NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Date: 21 July 2023 HASHDOG PTE. LTD. To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: HASHDOG PTE. LTD. FCC ID: 2BBAK-MACARON FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. HASHDOG PTE. LTD. requests that the following documents regarding this submission for FCC ID: 2BBAK-MACARON be kept confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf Tune-Up Procedure Tune-Up Procedure.pdf And below exhibit kept short-term confidential (180 days): External photos External photos.pdf Test setup photos test photo.pdf Internal photos Internal photos.pdf User manual User manual.pdf Those documents contain detailed system and equipment description and related information about the product which HASHDOG PTE. LTD. considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, HASHDOG PTE. LTD. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours Sincerely,

Report No.: BL-SZ2351022-AW 1 / 3 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Report No.: BL-SZ2351022-AW 2 / 3 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: BL-SZ2351022-AW 3 / 3 TOP VIEW OF EUT BOTTOM VIEW OF EUT --BLANK BELOW--

Label: Location(left side)：

Report No.: BL-SZ2351022-AI 1 / 4 EUT INTERNAL PHOTOS EUT UNCOVER VIEW 1 EUT UNCOVER VIEW 2 Report No.: BL-SZ2351022-AI 2 / 4 EUT UNCOVER VIEW 3 EUT UNCOVER VIEW 4 Bluetooth Antenna LoRa Antenna Contact Bluetooth Antenna Contact Report No.: BL-SZ2351022-AI 3 / 4 EUT UNCOVER VIEW 5 MAIN BOARD TOP VIEW GPS Antenna LoRa Antenna Report No.: BL-SZ2351022-AI 4 / 4 MAIN BOARD REAR VIEW (WITH SHIELDING) MAIN BOARD REAR VIEW (WITHOUT SHIELDING) --BLANK BELOW-- Bluetooth Chip LoRa Chip GPS Chip

Report No.: BL-SZ2351022-703 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 42 Web: www.titcgroup.com Template No.: TRP-FCC DASY-BodyI-1 (2023-01-30) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: HASHDOG PTE. LTD. Address: 152 BEACH ROAD #11-05, GATEWAY EAST, 189721 SINGAPORE Equipment Type: Mini OBD2 Dongle Model Name: Macaron Brand Name: HashDog FCC ID: 2BBAK-MACARON Test Standard: FCC 47 CFR Part 2.1093 (refer to section 3.1) Maximum SAR: Body (1 g@0mm): 1.00 W/kg Sample Arrival Date: Jul. 18, 2023 Test Date: Jul. 18, 2023 - Jul. 19, 2023 Date of Issue: Jul. 19, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Zhang Jiwei Checked by: Xu Rui Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2351022-703 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 42 Web: www.titcgroup.com Template No.: TRP-FCC DASY-BodyI-1 (2023-01-30) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Content Rev. 01 Jul. 19, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 4 1.1 Test Laboratory ............................................................................................................ 4 1.2 Test Location ................................................................................................................ 4 1.3 Test Environment Condition .......................................................................................... 4 2 PRODUCT INFORMATION ....................................................................................................... 5 2.1 Applicant Information .................................................................................................... 5 2.2 Manufacturer Information .............................................................................................. 5 2.3 Factory Information ....................................................................................................... 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Ancillary Equipment ...................................................................................................... 5 2.6 Technical Information ................................................................................................... 6 3 SUMMARY OF TEST RESULT ................................................................................................. 7 3.1 Test Standards ............................................................................................................. 7 3.2 Device Category and SAR Limit ................................................................................... 8 3.3 Test Result Summary ................................................................................................... 9 3.4 Test Uncertainty ......................................................................................................... 10 4 MEASUREMENT SYSTEM ..................................................................................................... 11 4.1 Specific Absorption Rate (SAR) Definition .................................................................. 11 4.2 DASY SAR System .................................................................................................... 12 5 SYSTEM VERIFICATION ........................................................................................................ 19 5.1 Purpose of System Check .......................................................................................... 19 5.2 System Check Setup .................................................................................................. 19 6 TEST POSITION CONFIGURATIONS .................................................................................... 20 6.1 Body-worn Position Conditions ................................................................................... 20 Report No.: BL-SZ2351022-703 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 42 Web: www.titcgroup.com Template No.: TRP-FCC DASY-BodyI-1 (2023-01-30) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 7 MEASUREMENT PROCEDURE ............................................................................................. 21 7.1 Measurement Process Diagram ................................................................................. 21 7.2 SAR Scan General Requirement ................................................................................ 22 7.3 Measurement Procedure ............................................................................................ 23 7.4 Area & Zoom Scan Procedure .................................................................................... 23 8 CONDUCTED RF OUPUT POWER ........................................................................................ 24 8.1 LoRa ........................................................................................................................... 24 8.2 Bluetooth .................................................................................................................... 25 9 TEST EXCLUSION CONSIDERATION ................................................................................... 26 9.1 SAR Test Consideration Table ................................................................................... 27 10 TEST RESULT ........................................................................................................................ 30 10.1 LoRa ...................................................…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2351022-AC 1 / 30 CALIBRATION REPORT F.1 E-Field Probe (EX3DV4 -SN:7510) Report No.: BL-SZ2351022-AC 2 / 30 Report No.: BL-SZ2351022-AC 3 / 30 Report No.: BL-SZ2351022-AC 4 / 30 Report No.: BL-SZ2351022-AC 5 / 30 Report No.: BL-SZ2351022-AC 6 / 30 Report No.: BL-SZ2351022-AC 7 / 30 Report No.: BL-SZ2351022-AC 8 / 30 Report No.: BL-SZ2351022-AC 9 / 30 Report No.: BL-SZ2351022-AC 10 / 30 F.2 Data Acquisition Electronics (DAE4 - SN:1454) Report No.: BL-SZ2351022-AC 11 / 30 Report No.: BL-SZ2351022-AC 12 / 30 Report No.: BL-SZ2351022-AC 13 / 30 Report No.: BL-SZ2351022-AC 14 / 30 Report No.: BL-SZ2351022-AC 15 / 30 F.3 835 MHz Dipole Report No.: BL-SZ2351022-AC 16 / 30 Report No.: BL-SZ2351022-AC 17 / 30 Report No.: BL-SZ2351022-AC 18 / 30 Report No.: BL-SZ2351022-AC 19 / 30 Report No.: BL-SZ2351022-AC 20 / 30 Report No.: BL-SZ2351022-AC 21 / 30 D835V2 Dipole impedance and return loss Validation Meas. Results Current Meas. Previous Meas. Max. Deviation Meas. Data 2023.05.15 2022.05.16 / Return Loss(dB) -29.596 -32.412 -8.69% Impedance 50.906 Ω - 3.2194 jΩ 50.497 Ω - 2.356 jΩ -0.8634Ω (Imaginary part) Return Loss for Head TSL Impedance for Head TSL Report No.: BL-SZ2351022-AC 22 / 30 F.4 2450 MHz Dipole Report No.: BL-SZ2351022-AC 23 / 30 Report No.: BL-SZ2351022-AC 24 / 30 Report No.: BL-SZ2351022-AC 25 / 30 Report No.: BL-SZ2351022-AC 26 / 30 Report No.: BL-SZ2351022-AC 27 / 30 Report No.: BL-SZ2351022-AC 28 / 30 Report No.: BL-SZ2351022-AC 29 / 30 Report No.: BL-SZ2351022-AC 30 / 30 D2450V2 Dipole impedance and return loss Validation Meas. Results Current Meas. Previous Meas. Max. Deviation Meas. Data 2023.05.17 2022.05.18 / Return Loss(dB) -26.656 -26.401 0.97% Impedance 54.73 Ω -1.149 jΩ 54.102 Ω +2.830 jΩ -3.979Ω (Imaginary part) Return Loss for Head TSL Impedance for Head TSL --END OF REPORT--

Report No.: BL-SZ2350847-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 16 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: HASHDOG PTE. LTD. Address: 152 BEACH ROAD #11-05, GATEWAY EAST, SINGAPORE Equipment Type: Macaron FPC PIFA Antenna Model Name: Macaron Mini OBD2 Dongle Brand Name: HashDog Test Standard: IEEE Std 149-2021 Sample Arrival Date: May 25, 2023 Test Date: May 29, 2023 - May 31, 2023 Date of Issue: Jul. 13, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Zou Liu Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2350847-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 16 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Jul. 13, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory ................................................................................................................... 3 1.2 Test Location ....................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information ........................................................................................................... 4 2.2 Manufacturer Information .................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ......................................................... 4 2.4 Ancillary Equipment ............................................................................................................. 4 2.5 Technical Information .......................................................................................................... 4 3 SUMMARY OF TEST RESULTS ............................................................................................... 5 3.1 Test Standards .................................................................................................................... 5 3.2 Test Verdict ......................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................. 5 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 6 4.1 Test Condition ..................................................................................................................... 6 4.2 Test Equipment List ............................................................................................................. 6 4.3 Test Setup ........................................................................................................................... 7 ANNEX A TEST RESULTS ........................................................................................................... 8 A.1 Gain and Efficiency ............................................................................................................. 8 A.2 VSWR ................................................................................................................................. 9 ANNEX B RADIATION PATTERN .............................................................................................. 11 ANNEX C TEST SETUP PHOTOS ............................................................................................. 15 ANNEX D EUT PHOTO .............................................................................................................. 15 Report No.: BL-SZ2350847-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 16 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2350847-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 16 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant HASHDOG PTE. LTD. Address 152 BEACH ROAD #11-05, GATEWAY EAST, SINGAPORE 2.2 Manufacturer Information Manufacturer HASHDOG PTE. LTD. Address 152 BEACH ROAD #11-05, GATEWAY EAST, SINGAPORE 2.3 General Description for Equipment under Test (EUT) EUT Name Macaron FPC PIFA Antenna Model Name Under Test Macaron Mini OBD2 Dongle Antenna Type PIFA Antenna Dimension s BT Antenna 22.2*20.7 mm Lora Antenna 34.3*29.6 mm Note: This report contains test data for Two wireless systems In this report, 1#-BT, 2#-Lora a…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2351022-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 68 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: HASHDOG PTE. LTD. Address: 152 BEACH ROAD #11-05, GATEWAY EAST, 189721 SINGAPORE Equipment Type: Mini OBD2 Dongle Model Name: Macaron Brand Name: HashDog FCC ID: 2BBAK-MACARON ISED Number: 30639-MACARON Test Standard: 47 CFR Part 15 Subpart C RSS-Gen Issue 5 RSS-247 Issue 2 (refer to section 3.1) Sample Arrival Date: May 29, 2023 Test Date: Jun. 01, 2023 - Jun. 20, 2023 Date of Issue: Jul. 20, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie Zhu Checked by: Ye Hongji Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ2351022-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 68 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Jul. 13, 2023 Initial Issue Rev. 02 Jul. 20, 2023 Corrected the Product Type in Section 2.5. TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 Factory Information ........................................................................................................ 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Technical Information ..................................................................................................... 6 3 SUMMARY OF TEST RESULTS ................................................................................................. 7 3.1 Test Standards ............................................................................................................... 7 3.2 Test Verdict .................................................................................................................... 7 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 8 4.1 Test Environments ......................................................................................................... 8 4.2 Test Equipment List ........................................................................................................ 8 4.3 Test Software List ........................................................................................................... 8 4.4 Measurement Uncertainty .............................................................................................. 9 4.5 Description of Test Setup ............................................................................................... 9 4.6 Measurement Results Explanation Example ................................................................ 12 5 TEST ITEMS .............................................................................................................................. 13 5.1 Antenna Requirements ................................................................................................. 13 5.2 Output Power ............................................................................................................... 14 5.3 Occupied Bandwidth .................................................................................................... 16 Report No.: BL-SZ2351022-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 68 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 5.4 Conducted Spurious Emission ..................................................................................... 17 5.5 Band Edge (Authorized-band band-edge) .................................................................... 19 5.6 Conducted Emission .................................................................................................... 21 5.7 Radiated Spurious Emission ........................................................................................ 22 5.8 Band Edge (Restricted-band band-edge) ..................................................................... 27 5.9 Power Spectral density (PSD) ...................................................................................... 28 ANNEX A TEST RESULT ............................................................................................................. 29 A.1 Output Power, E.I.R.P, Duty Cycle ............................................................................... 29 A.2 Occupied Bandwidth .................................................................................................... 33 A.3 Conducted Spuri…

Text truncated - open the document above for the full version.