2BBAWPF11H1-C Automatic Pet Feeder with Camera

Shenzhenbenfendianzishangwuyouxiangongsi (Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China) Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: (2026/3/20) 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BBAWPF11 Shenzhenbenfendianzishangwuyouxiangongsi (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Lisa Zhang Title: Manager Address: Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China

1 | P a g e Shenzhenbenfendianzishangwuyouxiangongsi (Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China) Attestation Statements To: Federal Communications Commission Date: (2026/3/20) 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2BBAWPF11] Product Name: [H1-C Automatic Pet Feeder with Camera] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Lisa Zhang Title: Manager Address: Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: ANTEK SERVICE INC FRN: 0033437609 Contact Name: Shirley Kwok Address: 901 N PENNSYLVANIA ST STE 0 DENVER, CO 80203, United States Telephone No: 01 303-8006306 Email: [email protected] This letter is to confirm that we (ANTEK SERVICE INC) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2026-03-20 Signed by (Printed Name/Title): Shirley Kwok/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhenbenfendianzishangwuyouxiangongsi FRN: 0033804329 FCC ID: 2BBAWPF11 Contact Name: Lisa Zhang Address: Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China Telephone No: 08618026982184 Email: [email protected] Applicant Signature: Date: 2026-03-20 Signed by (Printed Name/Title): Lisa Zhang / Manager

Shenzhenbenfendianzishangwuyouxiangongsi (Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China) (2026/3/20) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BBAWPF11 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description ⎯ FCC Software Security Requirements for UNII devices Rev1.0 The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Sincerely, (Signature) Printed Name: Lisa Zhang Title: Manager Address: Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China

Shenzhenbenfendianzishangwuyouxiangongsi (Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China) (2026/3/20) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BBAWPF11 I, the undersigned, hereby authorize (Shenzhen STS Test Services Co., Ltd.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Shenzhen STS Test Services Co., Ltd.) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Shenzhenbenfendianzishangwuyouxiangongsi). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) (Full name of contact person listed on FCC’s website): Lisa Zhang (Title): Manager

Shenzhenbenfendianzishangwuyouxiangongsi Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China) FCC Software Configuration Control Declaration Rev1.0 FCC Software Configuration Control Declaration Date: March 20, 2026 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: H1-C Automatic Pet Feeder with Camera / PF11 FCC ID: 2BBAWPF11 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. (Signature of applicant) Name: Lisa Zhang Date: Mar. 20, 26 Title: Manager Tel: 08618026982184 Fax: 08618026982184 Email: [email protected]

Page 1 of 13 FCC ID: 2BBAWPF11 External Photos Page 2 of 13 FCC ID: 2BBAWPF11 Page 3 of 13 FCC ID: 2BBAWPF11 Page 4 of 13 FCC ID: 2BBAWPF11 Page 5 of 13 FCC ID: 2BBAWPF11 Page 6 of 13 FCC ID: 2BBAWPF11

Size:57.76*39.6mm Label Location

Page 7 of 13 FCC ID: 2BBAWPF11 Internal Photos Page 8 of 13 FCC ID: 2BBAWPF11 Antenna Page 9 of 13 FCC ID: 2BBAWPF11 Page 10 of 13 FCC ID: 2BBAWPF11 Page 11 of 13 FCC ID: 2BBAWPF11 Page 12 of 13 FCC ID: 2BBAWPF11 Page 13 of 13 FCC ID: 2BBAWPF11

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.: STS2601395H01 Issued for Shenzhenbenfendianzishangwuyouxiangongsi Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China Product Name: H1-C Automatic Pet Feeder with Camera Brand Name: Oneisall Model Name: PF11 Series Model(s): N/A FCC ID: 2BBAWPF11 Test Standard: FCC 47CFR §2.1091 Page 2 of 7 Report No.: STS2601395H01 TEST REPORT Applicant’s Name ................. : Shenzhenbenfendianzishangwuyouxiangongsi Address ................................. : Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China Manufacturer's Name ........... : Shenzhenbenfendianzishangwuyouxiangongsi Address ................................. : Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China Product Description Product Name ........................ : H1-C Automatic Pet Feeder with Camera Brand Name .......................... : Oneisall Model Name .......................... : PF11 Series Model(s) ...................... : N/A Test Standards ..................... : FCC 47CFR §2.1091 447498 D01 General RF Exposure Guidance v06 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 22 Jan. 2026 Date (s) of performance of tests ............. : 22 Jan. 2026 to 30 Jan. 2026 Date of Issue .......................................... : 30 Jan. 2026 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 7 Report No.: STS2601395H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1091 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 7 Page 4 of 7 Report No.: STS2601395H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 30 Jan. 2026 STS2601395H01 ALL Initial Issue Page 5 of 7 Report No.: STS2601395H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name H1-C Automatic Pet Feeder with Camera Brand Name Oneisall Model Name PF11 Series Model(s) N/A Model Difference N/A Product Description The EUT is a H1-C Automatic Pet Feeder with Camera Operation Frequency: 2402~2480 MHz 802.11b/g/n/ax(20MHz): 2412~2472MHz 802.11n/ax(40MHz):2422~2462MHz IEEE 802.11a/ n(HT20)/ac(VHT20)/ax(HE20): 5.745GHz-5.825GHz IEEE 802.11a/ n(HT40)/ac(VHT40)/ax(HE40): 5.755GHz-5.795GHz Modulation Type: GFSK 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11ax(OFDM, OFDMA): BPSK,QPSK,16-QAM,64-QAM,256-QAM, 1024QAM 802.11a(OFDM): BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM): BPSK,QPSK,16-QAM,64-QAM 802.11ac(OFDM): BPSK,QPSK,16-QAM,64-QAM,256-QAM 802.11ax(OFDM, OFDMA): BPSK,QPSK,16-QAM,64-QAM,256-QAM, 1024QAM Antenna gain: 2.4GHz: 2.96dBi 5.8GHz: 3.57dBi Antenna Designation: FPC Antenna Power Rating DC 4.5V (1.5V*3) from battery, DC 5V from adapter Adapter Model No.: AS1207A-0502000USU Input: AC 100-240V 50/60Hz 0.35A MAX Output: DC 5V 2A Battery N/A Hardware Version N/A Software Version N/A 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China Page 6 of 7 Report No.: STS2601395H01 FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of the human exposure to radio-frequency (RF) radiation as specified in 1.1307 (b) Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm²) Limits for Occupational / controlled Exposures 300 - 1500 -- -- F/300 3.0-30 1842/f 4.89/f *(900/f²) 1500 – 100000 -- -- 5.0 Limits for General population / Uncontrolled Exposure 300 - 1500 -- -- F/1500 1.34-30 824/f 2.19/f *(180f²) 1500 – 100000 -- -- 1.0 F= Frequency in MHz Friss Formula Friss Transmission Formula: Pd = (Pout * G) / (4*pi*r²) Where Pd = power density in mW/cm² Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = Distance between observation point and the center of radiator in cm If we know the maximum gain of the antenna and the total output power to the antenna, through calculation, we will know MPE value at distance 20cm. Page 7 of 7 Report No.: STS2601395H01 2.3 TEST RESULT Tune up Mode Tune up Power BLE (GFSK) 6±1dBm WIFI 2.4G (802.11b) 12±1dBm WIFI 5.8G (802.11a) 11±1dBm Note: 1. The Maxinum power is less than the limit, complies with the exemption requirements. 2. The Bluetooth and WLAN can’t simultaneous transmission at…

Text truncated - open the document above for the full version.

R&D,productionandsalesofprofessionalwirelessterminalantenna SPECIFICATION CustomerName：ShenzhenHeshijiaTechnologyCo.,LTD ProductModel：HSJ-PFVO1 CustomerP/N： XINHENGYANGP/N：NZ.01.0000104 SPECIFFCATIONS:frequencyband：2400MHZ-2500MHZ/5150MHZ-5850MHZ Productiondate：2024.8.2 SampleVersion：V1 Manufacturer:ShenzhenXinhengyangTechnologyCo.,LTD Address:1/F,BuildingB,AerospacemicromotorBuilding,No.7Langshan No.2Road,XiliStreet,NanshanDistrict,Shenzhen Tel:0755-83600916Email:xinhengyang1116@163,com Networkaddress：https://www.xhy-2008.com XINHENGYANG FICTIONDQER&D Customer PURQCR&D R&D,productionandsalesofprofessionalwirelessterminalantenna NumberEffectivedateChangerecord V12024.8.2 Initialrelease R & D, productionand sales of professionalwirelessterminalantenna 一、Thebasicparameters A. ElectricalCharacteristics Frequency2400MHZ-2500MHZ 5150MHZ-5850MHZ VSWR< 3.0 Avg Efficiency>50% Impedance Polarization PeakGain 50 ± 25 Ohm Linear 2.4GHZ:2.96dBi 5.8GHZ:3.57dBi B. Material& MechanicalCharacteristics Materialof RadiatorFPCwhite. CableTypeGeneration/1.13 ConnectorTypeL=90MM Dimension/ C. Environmental OperationTemperature- 20 ̊C ~ + 60 ̊C StorageTemperature- 30 ̊C ~ + 70 ̊C R&D,productionandsalesofprofessionalwirelessterminalantenna 二、ElectricalSpecification ThosespecificationswerespeciallydefinedforHSJ-PFVO1model. 三、VSWR 1MeasuringMethod 1.A50 Ω coaxialcableisconnectedtotheantenna.Thenthiscableisconnected toanetworkanalyzertomeasuretheVSWR 2.Keepingthisjigawayfrommetalatleast20cm 2MeasurementfrequencypointsandVSWRvalue R&D,productionandsalesofprofessionalwirelessterminalantenna 四、Anechoicchamber Introduction: Microwavedarkroomandnoreflectionchamber,absorbingshortwavedarkroom darkroom.Microwavedarkroombyelectromagneticshieldingroom,filtering andisolation,groundingdevice,theventilationduct,indoordistributionsystem, monitoringsystem,ceilingwavematerialpart.Itisbasedonthewaveabsorbing materialastheliningoftheshieldroom,itcanabsorbthemostofthe electromagneticenergyintothesixwallisabettersimulationofthefreespace conditions. Themainworkingprincipleofmicrowaveanechoicchamberisaccordingtothe electromagneticwaveinthemediumfromthelowmagneticguidemagnetic directionofpropagationrules,absorbingmaterialstoguidetheelectromagnetic waveusinghighpermeability,throughresonance,asubstantialabsorptionof electromagneticwaveradiationenergy,bycouplingtheelectromagneticenergy intoheatenergy. mainperformance： Frequencyrange:400MHz~6GHzceilingreflectedwavelossmaterials:400MHz~ 6GHzisequaltoormorethan15dB(microwaveabsorbingmaterialbycompositewave absorbingmaterials,namelytaperedcontainingcarbonspongesuctionwavematerial pasteinferrite) R&D,productionandsalesofprofessionalwirelessterminalantenna 五、GaintableofAntenna Passivefieldpattern： R&D,productionandsalesofprofessionalwirelessterminalantenna Passiveefficiencygain： OTAactive： R&D,productionandsalesofprofessionalwirelessterminalantenna 六、AntennaDimensions R&D,productionandsalesofprofessionalwirelessterminalantenna 七、ROHS AntennaNZ.01.0000104meetsRoHSrequirements. 八、Productpackaginginstructions A.packingshouldmeetthemoistureproof,vibration,pressureand mildewproof,etc. B.thesmallestpackingunitlogomusthavethemanufacturer trademarks,productmodel,name,codeandquantity. C.intheattachedpackinglist,certificateofapproval,andthefactory inspectionreport. ***************************END****************************

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2601395W03 Issued for Shenzhenbenfendianzishangwuyouxiangongsi Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China Product Name: H1-C Automatic Pet Feeder with Camera Brand Name: Oneisall Model Name: PF11 Series Model(s): N/A FCC ID: 2BBAWPF11 Test Standards: FCC Part15.407 Page 2 of 40 Report No.: STS2601395W03 TEST REPORT Applicant’s Name ................. : Shenzhenbenfendianzishangwuyouxiangongsi Address ................................. : Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China Manufacturer's Name ........... : Shenzhenbenfendianzishangwuyouxiangongsi Address ................................. : Longhua District, Minxin Community Bishui Longting Building 6 Unit, 7B, Shenzhen GuangDong Sheng, 518000, China Product Description Product Name ........................ : H1-C Automatic Pet Feeder with Camera Brand Name ........................... : Oneisall Model Name .......................... : PF11 Series Model(s) .................... : N/A Test Standards ..................... : FCC Part15.407 Test Procedure ............................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 22 Jan. 2026 Date (s) of performance of tests ............. : 22 Jan. 2026 to 30 Jan. 2026 Date of Issue .......................................... : 30 Jan. 2026 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 40 Report No.: STS2601395W03 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 RADIATED EMISSION AND MEASUREMENT 17 4. POWER SPECTRAL DENSITY TEST 31 4.1 LIMIT 31 4.2 TEST PROCEDURE 31 4.3 DEVIATION FROM STANDARD 32 4.4 TEST SETUP 32 4.5 EUT OPERATION CONDITIONS 32 4.6 TEST RESULTS 32 5. DUTY CYCLE 33 5.1 TEST STANDARD 33 5.2 TEST PROCEDURE 33 5.3 DEVIATION FROM STANDARD 33 5.4 TEST SETUP 33 5.5 EUT OPERATION CONDITIONS 33 5.6 TEST RESULTS 33 6. BANDWIDTH MEASUREMENT 34 6.1 EMISSION BANDWIDTH (EBW) 26 BANDWID PROCEDURES / LIMIT 34 6.2 OCCUPIED BANDWIDTH ( 99%) TEST APPLIED PROCEDURES / LIMIT 35 6.3 MINIMUM EMISSION BANDWIDTH(6 DB) PROCEDURES / LIMIT 36 7. MAXIMUM OUTPUT POWER 37 7.1 LIMIT 37 7.2 TEST PROCEDURE 37 7.3 DEVIATION FROM STANDARD 37 Page 4 of 40 Report No.: STS2601395W03 Table of Contents Page 7.4 TEST SETUP 37 7.5 EUT OPERATION CONDITIONS 37 7.6 TEST RESULTS 37 8. AUTOMATICALLY DISCONTINUE TRANSMISSION 38 8.1 LIMIT OF AUTOMATICALLY DISCONTINUE TRANSMISSION 38 8.2 TEST RESULT OF AUTOMATICALLY DISCONTINUE TRANSMISSION 38 9. ANTENNA REQUIREMENT 39 9.1 STANDARD REQUIREMENT 39 9.2 EUT ANTENNA 39 APPENDIX - PHOTOS OF TEST SETUP 40 Page 5 of 40 Report No.: STS2601395W03 Revision History Rev. Issue Date Report No. Effect Page Contents 00 30 Jan. 2026 STS2601395W03 ALL Initial Issue Page 6 of 40 Report No.: STS2601395W03 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: § 15.407,KDB 789033 D02 General U-NII Test Procedures New Rules v02r01 FCC Part 15.407 FCC standard Test Item Results 15.207 AC Conducted Emission PASS 15.407 (a) /15.407 (e) 26dB/6dB &99% Bandwidth PASS 15.407(a) Maximum Conducted Output Power PASS 15.407(b)/15.209 Radiated Emission And (bandedge Emissions) Measurement PASS 15.407(a) Power Spectral Density PASS 15.407(c) Automatically Discontinue Transmission PASS 15.203/15.204 Antenna Requirement PASS Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 40 Report No.: STS2601395W03 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add.: 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 40 Report No.: STS2601395W03 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name H1-C Automatic Pet Feeder with Camera Brand Name Oneisall Model Name PF11 Series Model(s) N/A Model Difference N/A Product D…

Text truncated - open the document above for the full version.

STS2601395W03_Appendix 5G WIFI_U-NII-3 Duty Cycle Condition Mode Frequency (MHz) Duty Cycle (%) Correction Factor (dB) NVNT a 5745 87.95 0.56 NVNT n20 5745 92.41 0.34 NVNT n40 5755 83.93 0.76 NVNT ac20 5745 92.41 0.34 NVNT ac40 5755 83.52 0.78 NVNT ax20 5745 92.45 0.34 NVNT ax40 5755 81.72 0.88 STS2601395W03_Appendix 5G WIFI_U-NII-3 Test Graphs Duty Cycle NVNT a 5745MHz Duty Cycle NVNT n20 5745MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Duty Cycle NVNT n40 5755MHz Duty Cycle NVNT ac20 5745MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Duty Cycle NVNT ac40 5755MHz Duty Cycle NVNT ax20 5745MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Duty Cycle NVNT ax40 5755MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Maximum Conducted Output Power Condition Mode Frequency (MHz) Conducted Power (dBm) Limit (dBm) Verdict NVNT a 5745 11.81 30 Pass NVNT a 5785 11.82 30 Pass NVNT a 5825 11.96 30 Pass NVNT n20 5745 10.76 30 Pass NVNT n20 5785 11.31 30 Pass NVNT n20 5825 11.38 30 Pass NVNT n40 5755 9.04 30 Pass NVNT n40 5795 8.87 30 Pass NVNT ac20 5745 10.25 30 Pass NVNT ac20 5785 10.28 30 Pass NVNT ac20 5825 10.34 30 Pass NVNT ac40 5755 9.08 30 Pass NVNT ac40 5795 8.52 30 Pass NVNT ax20 5745 10.09 30 Pass NVNT ax20 5785 10.22 30 Pass NVNT ax20 5825 10.26 30 Pass NVNT ax40 5755 8.95 30 Pass NVNT ax40 5795 8.85 30 Pass STS2601395W03_Appendix 5G WIFI_U-NII-3 Test Graphs Power NVNT a 5745MHz Power NVNT a 5785MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Power NVNT a 5825MHz Power NVNT n20 5745MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Power NVNT n20 5785MHz Power NVNT n20 5825MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Power NVNT n40 5755MHz Power NVNT n40 5795MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Power NVNT ac20 5745MHz Power NVNT ac20 5785MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Power NVNT ac20 5825MHz Power NVNT ac40 5755MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Power NVNT ac40 5795MHz Power NVNT ax20 5745MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Power NVNT ax20 5785MHz Power NVNT ax20 5825MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Power NVNT ax40 5755MHz Power NVNT ax40 5795MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 -6dB Bandwidth Condition Mode Frequency (MHz) -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT a 5745 16.387 0.5 Pass NVNT a 5785 16.358 0.5 Pass NVNT a 5825 16.347 0.5 Pass NVNT n20 5745 17.585 0.5 Pass NVNT n20 5785 17.583 0.5 Pass NVNT n20 5825 17.574 0.5 Pass NVNT n40 5755 36.334 0.5 Pass NVNT n40 5795 36.344 0.5 Pass NVNT ac20 5745 17.598 0.5 Pass NVNT ac20 5785 17.594 0.5 Pass NVNT ac20 5825 17.583 0.5 Pass NVNT ac40 5755 36.328 0.5 Pass NVNT ac40 5795 36.323 0.5 Pass NVNT ax20 5745 18.779 0.5 Pass NVNT ax20 5785 18.897 0.5 Pass NVNT ax20 5825 18.876 0.5 Pass NVNT ax40 5755 37.979 0.5 Pass NVNT ax40 5795 37.82 0.5 Pass STS2601395W03_Appendix 5G WIFI_U-NII-3 Test Graphs -6dB Bandwidth NVNT a 5745MHz -6dB Bandwidth NVNT a 5785MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 -6dB Bandwidth NVNT a 5825MHz -6dB Bandwidth NVNT n20 5745MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 -6dB Bandwidth NVNT n20 5785MHz -6dB Bandwidth NVNT n20 5825MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 -6dB Bandwidth NVNT n40 5755MHz -6dB Bandwidth NVNT n40 5795MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 -6dB Bandwidth NVNT ac20 5745MHz -6dB Bandwidth NVNT ac20 5785MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 -6dB Bandwidth NVNT ac20 5825MHz -6dB Bandwidth NVNT ac40 5755MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 -6dB Bandwidth NVNT ac40 5795MHz -6dB Bandwidth NVNT ax20 5745MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 -6dB Bandwidth NVNT ax20 5785MHz -6dB Bandwidth NVNT ax20 5825MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 -6dB Bandwidth NVNT ax40 5755MHz -6dB Bandwidth NVNT ax40 5795MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Occupied Channel Bandwidth Condition Mode Frequency (MHz) 99% OBW (MHz) NVNT a 5745 16.758 NVNT a 5785 16.772 NVNT a 5825 16.743 NVNT n20 5745 17.946 NVNT n20 5785 17.936 NVNT n20 5825 17.949 NVNT n40 5755 36.552 NVNT n40 5795 36.515 NVNT ac20 5745 17.962 NVNT ac20 5785 17.968 NVNT ac20 5825 17.908 NVNT ac40 5755 36.539 NVNT ac40 5795 36.496 NVNT ax20 5745 19.119 NVNT ax20 5785 19.094 NVNT ax20 5825 19.121 NVNT ax40 5755 37.984 NVNT ax40 5795 37.991 STS2601395W03_Appendix 5G WIFI_U-NII-3 Test Graphs OBW NVNT a 5745MHz OBW NVNT a 5785MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 OBW NVNT a 5825MHz OBW NVNT n20 5745MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 OBW NVNT n20 5785MHz OBW NVNT n20 5825MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 OBW NVNT n40 5755MHz OBW NVNT n40 5795MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 OBW NVNT ac20 5745MHz OBW NVNT ac20 5785MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 OBW NVNT ac20 5825MHz OBW NVNT ac40 5755MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 OBW NVNT ac40 5795MHz OBW NVNT ax20 5745MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 OBW NVNT ax20 5785MHz OBW NVNT ax20 5825MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 OBW NVNT ax40 5755MHz OBW NVNT ax40 5795MHz STS2601395W03_Appendix 5G WIFI_U-NII-3 Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Conducte…

Text truncated - open the document above for the full version.