2BBBT-G200Smart watch

Smart WatchUser Manual Basic Product Operation 1.Press the key for 3 seconds to turn on or off. 2.On the main interface, Press the screen to switch the dial. APP download, installation and use 1. Scan the following QR code or enter each major application market to download and install "DaFit" Equipment requirements: ios 9.0 and above; Android 5.0 and above 2. After the download is completed, start the new user registration or third-party login.And improve personal basic information 3. Start binding watch 4. After the binding is successful, start to set the functions of the watch in the APP according to your habits Basic product functions 1.Motion Real time recording of current steps, distance, and calories 2.Call The watch can dial directly,store 100 phone numbers, and has recent call records 3.Real time measurement of current indices. The APP can set an alert index 4.Real time automatic measurement of --- saturation, can also be actively measured, and vibration prompts indicate measurement completion. 5. pressure Timely measure the high and low voltage at that time and synchronize it with the APP 6. Sleep monitoring Wearing it at night can record data such as sleep duration, deep sleep, and light sleep, and synchronize it to the app. 7. Weather forecast After successfully connecting to the app, the watch can view the weather conditions of the day and the past few days 8. Information reminder Watch saves the last 8 message prompts. Click to view the content, or click to clear the message 9.100+Sport mode Enter the selected sports mode and start, swipe to the right to pause, stop, or continue 10.Voice Assistant Click on voice, speak to the watch, and control the phone to achieve the goal 11. Music control Watch plays music from the phone, can pause/play, previous, next, volume adjustment 12. SOS Synchronize the emergency number to the watch end in the app, and click on SOS to make a call. 13. Photography Opencamera in the app, click on the watch to control the phone to take photos 14. Game Built in multiple entertainment decompression games 15. exercise Set the time and frequency in the watch, follow the practice, and achieve the purpose of training. Other functions of the watch: Do Not Disturb Mode/Stopwatch/Countdown/Flashlight/Calculator/ Female Physiological Cycle/Call Reminder/Alarm clock reminder/ long sitting reminder/Find phone /goal achievement reminder Matters needing attention 1: Please avoid strong impact, high temperature and exposure to the sun. 2: Do not disassemble, repair or modify the machine by yourself. 3: This machine can be charged with 5V 500MA -- 5V 2A charger. It is strictly prohibited to use the over-voltage load power supply for charging. 4: It is prohibited to charge when there is water stain. 5: This product is an electronic consumption monitoring product and is not used for medical purposes. The measured data are for reference only. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may causeharmfulinterferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Instructions for using the Bluetooth headset function A: Tws pairing 1. Headset pairing. Take the headset out of the wristbandhost, there will be a power-on prompt, turn on Bluetooth inthe phone settings, find the corresponding Bluetooth name“G-Pods*, for Bluetooth connection, the TWS headsethas been paired before the factory. Only the Bluetoothname“G-Pods’ is displayed. lf the phone is connectedit means that the product has been successfully connected. 2. The TWS headsets have been paired successfully at thefactory.When the headsets are removed from the mainunit of the bracelet, they will automatically turn on andautomatically pair and connect. 3.lf the headset is disconnected from the phone during useor the headset is not connected, the phone needs to bereconnected to Bluetooth. There is a previously connectedBluetooth model in the Bluetooth under the phone settings,please clear it first, and then search for Bluetooth G-Pod sto connect. Attention:This app is not a medical device.Dataobtained during the use of this app is for referenceonly, and should not be used for clinical diagnosismedical research, diagnostic, or treatment purposes B: The middle surface of the headset is a touchsurface, which is used to touch control toanswer/hang up the phone, control theprevious/next song, Al voice assistant. C: Answer and hang up calls When you call, remove the headset from the bracelet, andtouch the left ear or right …

Text truncated - open the document above for the full version.

Shenzhen Weizhong Xin Technology Co., Ltd Covered Equipment Certification Attestation Letter 5/14/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BBBT-G200 Shenzhen Weizhong Xin Technology Co., Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Shenzhen Weizhong Xin Technology Co., Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates)as an entity producing “covered” equipment. Shenzhen Weizhong Xin Technology Co., Ltd certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: lin jianwen Title: CEO Company Name: Shenzhen Weizhong Xin Technology Co., Ltd Date: 5/14/2026

Shenzhen Weizhong Xin Technology Co., Ltd * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BBBT-G200 FRN of applicant: 0033808932 Per section 2.911(d)(7) of the FCC rules, Shenzhen Weizhong Xin Technology Co., Ltd certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: GLOCERTS TECHNOLOGY INC FCC Registration Number (FRN): 0036339737 Physical U.S. Company Address: 19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507, United States Contact Person: Huiying Fan Agent Email Address:[email protected] Telephone No: (626) 588-8039 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Signed: Printed name: lin jianwen Title: CEO Company Name: Shenzhen Weizhong Xin Technology Co., Ltd Date: 5/14/2026 Agent Signed: Signed: Printed name: Huiying Fan Title: Director Company Name: GLOCERTS TECHNOLOGY INC Date: 5/14/2026

DATE:2026-05-14 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appointJason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonourbehalf,Iack nowledgethatallresponsibilityforcomplyingwiththetermsandconditionsforcertification,stillres ideswith Shenzhen Weizhong Xin Technology Co., Ltd and A415, Building 2, Huaqiang North SEG Science and Technology Park, Futian District, Shenzhen, China Signature: Name: lin jianwen Title: CEO Company: Shenzhen Weizhong Xin Technology Co., Ltd

Date 05/14/2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen Weizhong Xin Technology Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, Signature: Name: lin jianwen Title: CEO Company: Shenzhen Weizhong Xin Technology Co., Ltd

Shenzhen Weizhong Xin Technology Co., Ltd DATE : 2026-05-14 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BBBT-G200 Product Name: Smart watch Request for Confidentiality To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: Name: lin jianwen Title: CEO Company: Shenzhen Weizhong Xin Technology Co., Ltd

Differences Declaration To whom concern, We company Shenzhen Weizhong Xin Technology Co., Ltd hereby declares: The product models GT200, GT95, GT97, GT98, GT99, GT100, GT300, GT500 are identical in the same PCB layout, interior structure and electrical circuits, The differences are appearance color, appearance material and model name for commercial purpose. Authorized signature: Date: 2026-05-14

Page 1 of 4 Test Model No.: GT200 Page 2 of 4 Page 3 of 4 Page 4 of 4

Label Size:2*8mm Paper Color: White Label Location FCC ID:2BBBT-G200

Page 1 of 2 Test Model No.: GT200 Page 2 of 2

FCC ID: 2BBBT-G200 RF Exposure evaluation According to 447498 D04 Interim General RF Exposure Guidance v01 ERP/EIRP = P T +G T −L C ERP/EIRP is the equivalent (or effective) radiated power [in same units as P T , typically dBW, dBm, or power spectral density (psd)], relative to either a dipole antenna (ERP) or an isotropic antenna (EIRP). P T is the transmitter output power, in dBW, dBm, or psd (power over a specified reference bandwidth). G T is the gain of the transmitting antenna, in dBd (ERP) or dBi (EIRP). L C is the signal attenuation in the connecting cable between the transmitter and the antenna, in dB. Band Frequency (MHz) Output power (dBm) Output power (mW) Ant gain (dBi) EIRP (dBm) EIRP (mW) ERP (dBm) ERP (mw) Distance (cm) P th (mW) BLE 2440 2.89 1.95 0.17 3.06 2.02 0.91 1.23 0.5 2.8 Remark: ERP = EIRP−2.15dB Then SAR evaluation is not required

Global United Technology Services Co., Ltd. Report No.: GTS2026040481F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 27 TEST REPORT Applicant: Shenzhen Weizhong Xin Technology Co., Ltd Address of Applicant: A415, Building 2, Huaqiang North SEG Science and Technology Park, Futian District, Shenzhen, China Manufacturer: Shenzhen Weizhong Xin Technology Co., Ltd Address of Manufacturer: A415, Building 2, Huaqiang North SEG Science and Technology Park, Futian District, Shenzhen, China Equipment Under Test (EUT) Product Name: Smart watch Model No.: GT200, GT95, GT97, GT98, GT99, GT100, GT300, GT500 FCC ID: 2BBBT-G200 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: April 23, 2026 Date of Test: April 24, 2026-May 14, 2026 Date of report issued: May 14, 2026 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 27 2 Version Version No. Date Description 00 May 14, 2026 Original Tested By: Date: May 14, 2026 Test Engineer Prepared By: Date: May 14, 2026 Project Engineer Check By: Date: May 14, 2026 Reviewer Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 27 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION ...................................................................................................................................................2 3 CONTENTS ...............................................................................................................................................3 4 TEST SUMMARY ......................................................................................................................................4 5 GENERAL INFORMATION .......................................................................................................................5 5.1 GENERAL DESCRIPTION OF EUT ..........................................................................................................5 5.2 TEST MODE .........................................................................................................................................7 5.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................................7 5.4 DEVIATION FROM STANDARDS ..............................................................................................................7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................7 5.6 TEST FACILITY ....................................................................................................................................7 5.7 TEST LOCATION ..................................................................................................................................7 5.8 ADDITIONAL INSTRUCTIONS ..................................................................................................................7 6 TEST INSTRUMENTS LIST ......................................................................................................................8 7 TEST RESULTS AND MEASUREMENT DATA .....................................................................................10 7.1 ANTENNA REQUIREMENT ....................................................................................................................10 7.2 CONDUCTED EMISSIONS ....................................................................................................................11 7.3 CONDUCTED OUTPUT POWER ............................................................................................................14 7.4 CHANNEL BANDWIDTH .......................................................................................................................15 7.5 POWER SPECTRAL DENSITY ..............................................................................................................16 7.6 SPURIOUS EMISSION IN NON-RESTRICTED & RESTRICTED BANDS ........................................................17 7.6.1 Conducted Emission Method ......................................................................................................17 7.6.2 Radiated Emission Method .........................................................................................................18 8 TEST SETUP PHOTO .............................................................................................................................27 9 EUT CONSTRUCTIONAL DETAILS .......................................................................................................27 Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 27 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203/15.247 (c) Pass AC Power Line Conducted Emission …

Text truncated - open the document above for the full version.

深圳市一线通线缆有限公司 地址：深圳市宝安区沙井街道万丰98工业城21栋 天线规格承认书 Antenna Specification for Approval 客户名称 Customer Name：深圳市魔样科技有限公司 产品名称： Product Name：2.4G天线 全长25mm红色 客户型号： Product Name: 产品料号： PartNO.:C10-35-2.5 制 表 ： Write By：庄杰彬 日 期： Issued Date:2021-10-08 客 户: 工程R&DDept 采购BusinessDept 承认 ApprovedBy 一线通 研发R&DDept 工程 EngineerDept 审核 Approval 庄彩虹 庄杰彬 庄杰彬 Product Specification A.ElectricalCharacteristics Frequency 2400MHz ~2500MHzVSWR<3.0 Efficiency>30% Impedance50 Ohm Polarization Line Gain 0.17DBi B.Material&Mechanical Characteristics Material of RadiatorCu Cable Type 1.019P红 Connector Type:NO Dimension C.Environmental OperationTemperature-30°C~ + 8 0 °C StorageTemperature-30°C~+ 85°C Test Equipment&Conditions 1.Network Analyzers: Agilent8753D5071C 2.Communications Test Set: AgilentE5525C 3.3DChamber Test System Effiency&Gain RadiationPattern:

Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 21 1. Bandwidth 1.1 Test Result 1.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 0.973 / Pass 2440 1 0.971 / Pass 2480 1 0.973 / Pass 2M SISO 2402 1 1.966 / Pass 2440 1 1.969 / Pass 2480 1 1.970 / Pass 1.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 0.503 >=0.5 Pass 2440 1 0.509 >=0.5 Pass 2480 1 0.510 >=0.5 Pass 2M SISO 2402 1 0.861 >=0.5 Pass 2440 1 0.859 >=0.5 Pass 2480 1 0.854 >=0.5 Pass Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 21 1.2 Test Graph 1.2.1 OBW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 21 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 21 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 21 1.2.2 6dB BW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 6 of 21 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 7 of 21 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 8 of 21 2. Maximum Conducted Output Power 2.1 Test Result Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit 1M SISO 2402 2.59 <=30 Pass 2440 2.81 <=30 Pass 2480 2.73 <=30 Pass 2M SISO 2402 2.63 <=30 Pass 2440 2.89 <=30 Pass 2480 2.78 <=30 Pass Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 9 of 21 3. Maximum Power Spectral Density 3.1 Test Result Mode TX Type Frequency (MHz) Maximum PSD (dBm) Verdict ANT1 Limit(dBm/3kHz) 1M SISO 2402 2.50dBm/100kHz <=8 Pass 2440 2.72dBm/100kHz <=8 Pass 2480 2.65dBm/100kHz <=8 Pass 2M SISO 2402 2.49dBm/100kHz <=8 Pass 2440 2.76dBm/100kHz <=8 Pass 2480 2.65dBm/100kHz <=8 Pass Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 10 of 21 3.2 Test Graph 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 11 of 21 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 12 of 21 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 13 of 21 4. Unwanted Emissions In Non-restricted Frequency Bands 4.1 Test Result 4.1.1 Ref Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) 1M SISO 2402 1 2.51 2440 1 2.73 2480 1 2.65 2M SISO 2402 1 2.52 2440 1 2.78 2480 1 2.69 4.1.2 CSE Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) Limit (dBm) Verdict 1M SISO 2402 1 2.73 -17.27 Pass 2440 1 2.73 -17.27 Pass 2480 1 2.73 -17.27 Pass 2M SISO 2402 1 2.78 -17.22 Pass 2440 1 2.78 -17.22 Pass 2480 1 2.78 -17.22 Pass Report No.: GTS2026040481F01 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong …

Text truncated - open the document above for the full version.

Page 1 of 2 Test Model No.: GT200 Radiated Emission Page 2 of 2 Conducted Emissions RF Conducted Test