2BBEH-W3683 in 1 Magnetic Wireless Charger

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Jiangxi Kingtron Technology Co., Ltd. Grantee code: 2BBEH FCC ID: 2BBEH-W368 Contact Name: Feng Liu Address: Luoxin Tech. Industrial Park, 2nd District, Quannan Industrial Park, Ganzhou, Jiangxi, China, 341800 Telephone No: 15999719610 Fax No: Email: [email protected] i. [Jiangxi Kingtron Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Jiangxi Kingtron Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Jiangxi Kingtron Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2024/01/02 Applicant’s Name: Feng Liu Title: Engineer Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Jiangxi Kingtron Technology Co., Ltd. Address: Luoxin Tech. Industrial Park, 2nd District, Quannan Industrial Park, Ganzhou, Jiangxi, China, 341800 Product Name: 3 in 1 Magnetic Wireless Charger Model Number: W368 FCC Identifier: 2BBEH-W368 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Feng Liu Date: 2024.01.02 Title: Engineer Signature of applicant:

C5266091_X10_Ed.2 1/1 < Jiangxi Kingtron Technology Co., Ltd.> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024.01.02 Subject: Request for Confidentiality FCC ID: 2BBEH-W368 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Feng Liu Title: Engineer

External Photo FCC ID: 2BBEH-W368

Label:

Internal Photo FCC ID: 2BBEH-W368 ANT for iPhone ANT for AirPods ANT for Watch

零 件 承 认 书 Part acknowledgement 供 应 商 全 称Full name of supplier：东莞捷瑞思科技有限公司 Dongguan Jerice Technology Co. , Ltd. 供 应 商 地 址Address of supplier ：东莞市大岭山朗湖路 96 号（金雄达科技园 L 栋 3 楼） 96 Long Wu Road, Tai Ling Shan, Dongguan (3F, building L, Kam Hung Tat Science and Technology Park) 物 料 名 称Name of material ： A11 coil 物 料 规 格 ： Material specifications： A11 6.3uH\ 单股单层 \20.5*42*0.08*105P\10TS\ 磁 片φ 43*1.0mm\ 材质 PC95\L=35mm\ 带背胶 机 种 型 号Type and model: 客 户 名 称Customer name: Jiangxi Luoxin Electronics Co., Ltd 客 户 料 号Customer data:E28-00049 送 样 时 间Sample delivery time:2023年10月07日 备注Notes:新物料New materials：替代料Alternative： 承认结果 Acknowledge the results 合格 Qualified 不合格 Disqualified 不合格原因 Reasons for non-conformance ： 不合格承认书及样品处理方式 Acceptance of non-conformance and sample handling ： 退回采购 Return purchase 销毁处理 Disposal 供应商签章 DisposalSignature of supplier 承认签章 Recognize the signature 申请人 Applicant 品质 Quality 核准 Approved 申请人 pplicant 测试员 Tester 工程 Project 品质 Quality 核准 Approved 陆琳 梁梅香陆如圣 承认章 Recognition Stamp 承认章 Recognition Stamp 日期 Date : 2023.10.07 日期 Date : W368 一、目录Table of contents： 1.封面Cover..................................................................第 1-1 页 2.目录Table of contents......................................................第 2-2 页 3.产品图Product drawings...................................................第 3-3 页 4.平面结构图A plan............................................................第 4-4 页 5.产品参数Product parameters.............................................第 5-5 页 6.电性参数Electrical parameters..........................................第 5-5 页 7.材料清单.....................................................................第 5-5 页 8.包装Packaging...............................................................第 6-6 页 二、产品图面Productdrawing： 三、平面结构图A plan： 单位:MM 线圈：10圈 四．产品参数Productparameters： 圈数 Turns 线径 WireDia 绕线方式疏/密 Thewayofwindingis sparse/dense 绕线方向 Directionof winding 相交是/否 Intersection yes/No 线圈正/反贴 Positive/negativ ecoil 10TS0.08*105P 丝包线 密绕 Encircling 逆时针 Counterclockwise 是Yes 反贴 Counter-post 所有材料要求合格ROHS标准AllmaterialsrequiredtomeetROHSstandards 五．电气特性Electricalcharacteristics 温度：25º±10C湿度：65º±10%Temperature:25O±10chumidity:65o±10% 序号 NO 项目Project端子 Terminal 标准 Standards 测试条件 Testconditions 测试仪器 Testequipment 1IND1-2 线脚加磁片 PINanddisk： 电感：6.3uH±5% Q值：≧60 DCR值：0.05Ω±5% 1kHz/V LCZMETER1062 六．材料清单Billofmaterials： 序号 NO 材料名称 Nameof material 品名描述 Descriptionofproductname 物料代码 MaterialCode 厂商代码 VendorCode 1 线材Wire 0.08*105P丝包线 Silk-cladwire JR-RQ-0046WH 2 铁氧体Ferrite 43*5.2*1.0带孔双槽L型 G43-1.0-1008TT 3 双面胶 Double-sided glue 42*5.3*0.08H（带孔，带手撕) OT-42HH 4 金手指胶布 Goldfingertape 高温胶带 Hightemperatureadhesive tape8MN GR-0008GK 5 胶水Glue白胶Whiteglue BR-0001BY 6 锡条Tinstrips 环保无铅焊锡条 Environmentallyfriendlylead-free solderrod 无铅高温锡条 QD 七、包装Packaging： 图 1：单层泡棉托盘1 盒包装270 PCS 图 2：统一方向线头朝上整齐排放入盘中， 图3：放入包装箱，每箱放置5层图4：封箱，用透明胶封箱 图 5：包装箱贴标签图 6：物料堆放，整齐整洁，标签往外方便寻找物料

零 件 承 认 书 Part acknowledgement 供 应 商 全 称Full name of supplier： 东莞捷瑞思科技有限公司 Dongguan Jerice Technology Co. , Ltd. 供应商地址Address of supplier：东莞市大岭山朗湖路96号（金雄达科技园L栋3楼） 96 Long Wu Road, Tai Ling Shan, Dongguan (3F, building L, Kam Hung Tat Science and Technology Park) 物 料 名 称Name of material：： 手表线圈Watch coil 物 料 规 格：Material specifications：软磁25*2.6MM 0.08*24P 7.7UH-8.0UH单股双层 带 N52 磁铁 磁力 3400GS± 200GS 带背胶 L=90MM 机 种 型 号Type and model: 客 户 名 称Customer name : Jiangxi Luoxin Electronics Co., Ltd. 客 户 料 号Customer data:E28-00021 送 样 时 间Sample delivery time:2023年7月20日 备注 Notes: 新物料 New materials ：代料 Alternative ： 承认结果 Acknowledge the results 合格 Qualified 不合格 Disqualified 不合格原因 Reasons for non-conformance ： 不合格承认书及样品处理方式 Acceptance of non-conformance and sample handling ： 退回采购 Return purchase 销毁处理 Disposal 供应商签章Signature of supplier承认签章 Recognize the signature 申请人 Applicant 品质 Quality 核准 Approved 申请人 pplicant 测 试 员 Tester 工程 Proje ct 品质 Qualit y 核准 Approve d 陆琳梁梅香陆如圣 承认章 Recognition Stamp 承认章 Recognition Stamp 日期 Date : 2023.7.20日期 Date: W368 一、 目录：Table of contents 1.封面Cover.....................................................................第1-1页 2.目录Table of contents......................................................第2-2页 3.产品图Product drawings...................................................第3-3页 4.尺寸图Size Map............................................................第4-4页 5.产品参数Product parameters.............................................第5-5页 6.技术要求Technical requirements.......................................第5-5页 7.电性参数Electrical parameters..........................................第5-5页 8.包装Packaging...............................................................第6-6页 9.材料清单Bill of materials................................................第7-7页 二、 产品图面Productdrawing： 三、平面结构图A plan： 单位:MM 线圈：14圈 四、产品参数Productparameters： 脚位Feet线径Diameteroftheline圈数Numberofturns备注Notes 1-20.08*24P14 热风绞合线 HotAirStrand 五、技术要求Technicalrequirements： 1.固定好线头线尾，防止线松断线等现象 Fixtheheadandtailofthreadtopreventlooseandbrokenthread 2.按客户要求把过长的线头剪，镀上锡，镀锡深度统一为2±1MM Accordingtocustomer'srequirements,thelengthofwireshears,Tinning,tinningdepthof2±1MM 3．在磁片上点上适当的白胶，贴上线圈，过程中要保证产品表面干净整洁 Inthemagneticpointontheappropriatewhiteglue,pastethecoil,theprocesstoensurethatthe productsurfacecleanandtidy 4.所用软磁片为带圆孔,无破损 Thesoftdiskusediswithroundhole,nodamage 5.附加工序（按客户要求）：于成品中间圆孔装上7.65x2.5mm的磁铁并在成品 背后加贴直径14mm的圆双面胶，后包装 Install7.65x2.5mmmagnetinthemiddleholeofthefinishedproductandpaste14mmdiameterrounddouble-sided adhesiveonthebackofthefinishedproduct 六、电性参数Electricalparameters： 1.电感值，Q值Inductancevalue,Qvalue： PINPIN1—2=7.7~8.0UH 以上电感值以铨华1062A仪器,以10KHZ/0.3Vrms为标准或等同仪器。 Q值以铨华1062A仪器，以100KHZ/0.3Vrms为标准或等同仪器 Theaboveinductancevaluesarebasedonchuanhua1062Ainstrument,using10KHZ/0.3vrmsasthestandardorequivalent instrument.TheQvalueisbasedonchuanhua1062Ainstrumentand100KHZ/0.3vrmsorequivalentinstrument 七、包装Packaging： 图1：单层泡棉托盘，1盒包装240PCS Figure1:Single-layerfoamtray,1boxpacking240pcs 图2：统一方向线头朝上整齐排放入盘中 Figure2:UniformDirectionLineheadupneatlyintothedisk 图3：放入包装箱，每箱放置10层 Figure3:putintothepackingbox,eachboxput10layers 图4：封箱，用透明胶封箱 Figure4:sealingtheboxwithtransparentglue 图5：包装箱贴标签 Figure5:Packaginglabel 图6：物料堆放，整齐，标签往外方便寻找物料 Figure6:materialsstacked,neat,labelstofacilitatethe searchformaterials 八、材料清单Billofmaterials： 序号NO名称Name材质Material供应商Suppliers备注Notes 1 热风线 HotAirLine 0.08*24P 维汉或等同 Uyghurorequivalent 2 磁片 Disk G25软基材 G25softsubstrate 天通或等同 TXorequivalent 3 锡 Tin 高温环保 Hightemperature environmentalprotection 千岛或等同 ThondIslandor equivalent 4 白胶Whiteglue BY882 宝月或等同 Treasuremonthor equivalent 5 双面胶 Double-sidedglue 513-14mm 鸿辉或等同 HungFaiorequivalent 6 强磁 Strongmagnetism 7.65*2.5(强度3400± 200GS) 联胜或等同 Win-winorequal

零 件 承 认 书 Part acknowledgement 供 应 商 全 称Full name of supplier：东莞捷瑞思科技有限公司 Dongguan Jerice Technology Co. , Ltd. 供 应 商 地 址Address of supplier ：东莞市大岭山朗湖路 96 号（金雄达科技园 L 栋 3 楼） 96 Long Wu Road, Tai Ling Shan, Dongguan (3F, building L, Kam Hung Tat Science and Technology Park) 物 料 名 称Name of material ： A11 coil 物 料 规 格 ： Material specifications： A11 6.3uH\ 单股单层 \20.5*42*0.08*105P\10TS\ 磁 片φ 43*1.0mm\ 材质 PC95\L=90mm\ 带背胶 机 种 型 号Type and model: 客 户 名 称Customer name: Jiangxi Luoxin Electronics Co., Ltd 客 户 料 号Customer data:E28-00049 送 样 时 间Sample delivery time:2023年10月07日 备注Notes:新物料New materials：替代料Alternative： 承认结果 Acknowledge the results 合格 Qualified 不合格 Disqualified 不合格原因 Reasons for non-conformance ： 不合格承认书及样品处理方式 Acceptance of non-conformance and sample handling ： 退回采购 Return purchase 销毁处理 Disposal 供应商签章 DisposalSignature of supplier 承认签章 Recognize the signature 申请人 Applicant 品质 Quality 核准 Approved 申请人 pplicant 测试员 Tester 工程 Project 品质 Quality 核准 Approved 陆琳 梁梅香陆如圣 承认章 Recognition Stamp 承认章 Recognition Stamp 日期 Date : 2023.10.07 日期 Date : W368 一、 目录Tableof contents： 1.封面Cover..................................................................第 1-1 页 2.目录Tableof contents......................................................第2-2 页 3.产品图Productdrawings...................................................第 3-3 页 4.平面结构图A plan............................................................第 4-4 页 5.产品参数Productparameters.............................................第5-5 页 6.电性参数Electricalparameters..........................................第 5-5 页 7.材料清单.....................................................................第 5-5 页 8.包装Packaging...............................................................第6-6 页 二、 产品图面Productdrawing： 三、平面结构图A plan： 单位:MM 线圈：10圈 四．产品参数Productparameters： 圈数 Turns 线径 WireDia 绕线方式疏/密 Thewayofwindingis sparse/dense 绕线方向 Directionof winding 相交是/否 Intersection yes/No 线圈正/反贴 Positive/negativ ecoil 10TS0.08*105P 丝包线 密绕 Encircling 逆时针 Counterclockwise 是Yes 反贴 Counter-post 所有材料要求合格ROHS标准AllmaterialsrequiredtomeetROHSstandards 五．电气特性Electricalcharacteristics 温度：25º±10C湿度：65º±10%Temperature:25O±10chumidity:65o±10% 序号 NO 项目Project端子 Terminal 标准 Standards 测试条件 Testconditions 测试仪器 Testequipment 1IND1-2 线脚加磁片 PINanddisk： 电感：6.3uH±5% Q值：≧60 DCR值：0.05Ω±5% 1kHz/V LCZMETER1062 六．材料清单Billofmaterials： 序号 NO 材料名称 Nameof material 品名描述 Descriptionofproductname 物料代码 MaterialCode 厂商代码 VendorCode 1 线材Wire 0.08*105P丝包线 Silk-cladwire JR-RQ-0046WH 2 铁氧体Ferrite 43*5.2*1.0带孔双槽L型 G43-1.0-1008TT 3 双面胶 Double-sided glue 42*5.3*0.08H（带孔，带手撕) OT-42HH 4 金手指胶布 Goldfingertape 高温胶带 Hightemperatureadhesive tape8MN GR-0008GK 5 胶水Glue白胶Whiteglue BR-0001BY 6 锡条Tinstrips 环保无铅焊锡条 Environmentallyfriendlylead-free solderrod 无铅高温锡条 QD 七、包装Packaging： 图 1：单层泡棉托盘1 盒包装270 PCS 图 2：统一方向线头朝上整齐排放入盘中， 图3：放入包装箱，每箱放置5层图4：封箱，用透明胶封箱 图 5：包装箱贴标签图 6：物料堆放，整齐整洁，标签往外方便寻找物料

Setup Photo FCC ID: 2BBEH-W368