2BBGK-I10Electric Scooter

www.iscooterglobal.com www.facebook.com/iScooterGlobal [email protected] i10 64 TIPS Step 2. Insert the all 4pcs screws into the holes, then tighten each of them. Step 1. Close the latch properly until you hear a click sound. (Make sure close tight) B) If there is some noise from the rear brake disc or the rear suspension. (Image B) PLEASE EMAIL us:support@iscooter- global.com FOR ASSISTANCE. A) If the folding mechanism is too loose or too tight, please adjust the silvers screw to make it a little higher or shorter. (Image A) BA QUICK START C) Download the "iScooter " app from the App Store (iPhone) or Google Play (Android phone) for more information and functions. C 1.Package Contents 01 2. Product Overview 02 3. Charging 04 4. First Riding 04 5. Riding Basics 05 6. Riding Notice 06 7. Folding and Carrying 06 8. Disc Brake Adjustment 07 9. Daily Care and Maintenance 08 10. Specifications 09 Contents 11. Question & Answer 10 12. Contact Us 10 1 x Allen Wrench4 x Screws 1 x Charger When unboxing your i10 electric scooter, please verify that the below items are included in the package. If anything is missing or damaged, please contact iScooter customer service for support: [email protected]. Package Contents 01 Product Overview Folding Clip Brake Display Handlebar Folding Latch Deck Kickstand Disc Brake Taillight Pneumatic Tire 02 Charging Port Tips After powering on the scooter, press the throttle to accelerate. During riding, keep both feet on the deck.Or download the "iScooter" app for more information and functions. Long press for about 2 seconds to turn on / off The power level is indicated by five battery bar on the control panel. Turn on your scooter, one-click to turn on/off the front light. Double-click the power button to switch speed mode. Keep same speed for 5 seconds, and it will beep and active the cruise control The scooter can be locked and unlocked by iScooter app. Power Button Battery Indicator Light Cruise Control Lock Indicator Control Panel Mode km/h ECOD S After powering on the scooter, press the throttle to accelerate. During riding, keep both feet on the deck. Download the "iScooter" app from the App Store(iPhone) or Google Play (Android phone) for more information and functions. Charging First Ride Your scooter will be fully charged when the LED light on the charger changes to green from red. The scooter has charging protection and charging will cut off automatically after fully charge. Even so, we still don't recommend charging your scooter for a long time more than 24 hours at one time. Do not connect the charger if the charging port is wet. Keep the charging port closed when not charging. Note: The scooter cannot be turned on during the charging period. 2. Stand on the base with one foot and propel yourself with the other foot. 3. When the scooter starts to coast, put both feet on the deck and press the accelerator (the accelerator initiates once the coasting speed exceeds 3mph) 4. Release the accelerator and the kinetic energy recovery system (KERS) initiates automatically to brake slowly; And squeeze the brake lever for a sudden brake. Wear helmets and knee pads in case of falls and injuries when you learn to ride the scooter, as shown in the figure. 5. Tilt your body to the steering direction as you turn, and slowly turn the handlebar. 1. Turn the power on, and check the electricity indicator. Make sure that the scooter's turned off. To fold, unlock the folding mechanism, and bend the handlebar stem to hook the buckle on the rear fender. To open, press the bell trigger to remove from the buckle, erect the handlebar and lock the folding structure. Folding and Carrying Riding Notice The iScooter i10 electric scooter is a leisure device. But once they're in a public area, they'll be seen as vehicles, subject ing to any risks faced by vehicles. For your safety, please follow instructions in the manual and traffic laws and regulations set forth by government and regulatory agencies. Ɣ Respect pedestrians' right of way. Try not to startle them while driving, especially children. When you ride from behind pedestrians, ring your bell to give them a heads-up and slow your scooter to pass from their left (applicable to countries where vehicles drive on the right). When you ride across pedestrians, keep to the right at a low speed. When you drive across pedestrians, keep the lowest speed or getting off the vehicle. Ɣ Closely follow the safety instructions in the manual. iScooter shall not be liable for any financial losses, physical injuries, accidents, legal disputes and other interest conflicts resulted from actions that violate user instructions. Ɣ Check the scooter before every use. When you note loosen parts, low battery alerts, excessive wear, strange sounds, malfunctions and other abnormal conditions, stop riding. Ɣ WARNING – Risk of Fire – No User Serviceable Parts. To adjust the disc brake sensitivity: You need the Allen wrench to loosen the screw on the rocker. • When the disc brake is too sensitive, rotate the disc brake rocker down a bit. Then, reinstall the screw back to the brake cable core to tighten. • When the disc brake cannot stop, rotate the disc brake rocker up a bit. Then, reinstall the screw back to the brake cable core to tighten. Notice: The disc brake may squeak when in use until it is broken in. This is normal and does not affect the brake's function or performance. To remove the disc brake noise, First make sure the scooter is turned off. For easier operating, we suggest you put the scooter on the desk. • Loosen two screws on the pump (not the screw on the rocker). • Adjust the position of the disc brake pump to ensure that the brake disc is in the middle of the two brake pads. • Keep the brake disc and brake pad not touching each other. • Hold the disk brake pump in the desired position, then retighten the screws to the pump. Disc Brake Adjustment 1. Please try to store the scooter in a cool and dry place between 14˭
and 10…

Text truncated - open the document above for the full version.

ShenzhenXinchengTimesTechnologyCo.,Ltd 2024-03-13 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID:2BBGK-I10) [ShenzhenXinchengTimesTechnologyCo.,Ltd](“theapplicant”)certifiesthatthe equipmentforwhichauthorizationissoughtisnot“covered”equipmentprohibited fromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCCrules. Sincerely, YanHuiZeng ShenzhenXinchengTimesTechnologyCo.,Ltd 2024-03-13 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID:2BBGK-I10) [ShenzhenXinchengTimesTechnologyCo.,Ltd](“theapplicant”)certifiesthat,asofthe dateofthefilingoftheapplication,theapplicantisnotidentifiedontheCoveredListas anentityproducing“covered”equipment. Sincerely, YanHuiZeng

ShenzhenXinchengTimesTechnologyCo.,Ltd AgentAuthorizationLetter 2024-03-13 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 USA RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeShenzhenMostTechnologyServiceCo.,Ltd.toact onourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthe signingofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuse Actof1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, Name: YanHuiZeng Position: Manager CompanyName: ShenzhenXinchengTimesTechnologyCo.,Ltd Address: 104-105,BlockC,DonghaiWangBuilding,No.369BulongRoad,Ma'antang Community,BantianStreet,LonggangDistrict, Shenzhen,Guangdong,China Tel/Fax 8618682071093 E-Mail: [email protected]

ShenzhenXinchengTimesTechnologyCo.,Ltd LongTermConfidentialityRequestLetter 2024.03.13 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 USA RE:CONFIDENTIALITYREQUESTFOR(FCCID:2BBGK-I10) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459of CFR47.Wehaverequestedthatthe -e.g.Blockdiagram -e.g.SCH -e.g.OperationalDescription requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrompublicreview. Theabovedocumentsarecompanyproprietaryinformationthatcouldnevergetinto thepossessionofyourcompetition. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, Name: YanHuiZeng Position: Manager CompanyName: ShenzhenXinchengTimesTechnologyCo.,Ltd Address: 104-105,BlockC,DonghaiWangBuilding,No.369BulongRoad,Ma'antang Community,BantianStreet,LonggangDistrict, Shenzhen,Guangdong,China Tel/Fax 8618682071093 E-Mail: [email protected]

Modeldifferenceletter 2024.03.13 OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA ThisisanewApplicationfromShenzhenXinchengTimesTechnologyCo.,Ltd ModelNo.: i10 ， i10MAX ， i10S ， i10Pro ， i10Plus,S10 ， S10S ， S10Pro,S10MAX,S10Plus ， X10 ， X10S ， X10Pro ， X10Plus ， X10MAX Onlythemodeli10wastested,Theirelectricalcircuitdesign,layout, componentsusedandinternalwiringareidentical,OnlytheAppearanceand modelnameisdifferent. Thankyouforyourcooperation! Yourssincerely, Signatory: Sincerely, Signature: Name:YanHuiZeng Title:Manager

Model No.: i10 FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE Model No.: i10 LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE Model No.: i10 TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE Model No.: i10

FCC ID:2BBGK-I10

Model No.: i10 Page 1 of 4 INTERNAL PHOTO OF SAMPLE INTERNAL PHOTO OF SAMPLE Model No.: i10 Page 2 of 4 INTERNAL PHOTO OF SAMPLE PCB Model No.: i10 Page 3 of 4 BT Antenna Model No.: i10 Page 4 of 4

Shenzhen Most Technology Service Co., Ltd. No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China. RF Exposure Evaluation Report Report Reference No. ..................... : FCC ID.. ........................................... : MTEB24030082-H 2BBGK-I10 Compiled by ( position+printed name+signature) .. : File administrators Alisa Luo Supervised by ( position+printed name+signature) .. : Test Engineer Sunny Deng Approved by ( position+printed name+signature) .. : Manager Yvette Zhou Date of issue ..................................... : Mar.12,2024 Representative Laboratory Name .: Shenzhen Most Technology Service Co., Ltd. Address ............................................ : No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China. Applicant’s name ............................ : Shenzhen Xincheng Times Technology Co.,Ltd Address ............................................ : 104-105, Block C, Donghai Wang Building, No. 369 Bulong Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen Test specification/ Standard ..........: 47 CFR Part 1.1307 47 CFR Part 2.1093 TRF Originator .................................. : Shenzhen Most Technology Service Co., Ltd. Shenzhen Most Technology Service Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Most Technology Service Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Most Technology Service Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Electric Scooter Trade Mark ....................................... : N/A Model/Type reference....................... : i10 Listed Models .................................. : i10MAX，i10S，i10Pro，i10Plus,S10，S10S， S10Pro,S10MAX,S10Plus，X10，X10S，X10Pro，X10Plus， X10MAX Modulation Type ............................... : GFSK Operation Frequency ........................ : From 2402MHz to 2480MHz Hardware Version .............................. M0-LO4-V2.06-20230603H/M0-2BLE8-V5.43-20230303 Software Version ............................... 8429-05200713 510-07F5 Rating ............................................... : 1:DC 36V (by Battery) 2:DC 42V (by Adapter) Result................................................ : PASS Report No.: MTEB24030082-H Page 2 of 5 T E S T R E P O R T Equipment under Test : Electric Scooter Model /Type : i10 Listed Models i10MAX，i10S，i10Pro，i10Plus,S10，S10S， S10Pro,S10MAX,S10Plus，X10，X10S，X10Pro，X10Plus， X10MAX Remark Difference in Appearance and model names Applicant : Shenzhen Xincheng Times Technology Co.,Ltd Address : 104-105, Block C, Donghai Wang Building, No. 369 Bulong Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen Manufacturer : Shenzhen Xincheng Times Technology Co.,Ltd Address : 104-105, Block C, Donghai Wang Building, No. 369 Bulong Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: MTEB24030082-H Page 3 of 5 1. R e v i s i o n H i s t o r y Revision Issue Date Revisions Revised By 00 2024.03.12 Initial Issue Alisa Luo Report No.: MTEB24030082-H Page 4 of 5 2. S A R Ev a l u a t i o n 2.1 RF Exposure Compliance Requirement 2.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 2.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion Report No.: MTEB24030082-H Page 5 of 5 2.1.3 EUT RF Exposure Measurement Data BLE GFSK Test channel Peak Output Power (dBm) Tune up tolerance (dBm) Maximum tune-up Power (dBm) Lowest(2402MHz) 0.411 0.411±1 1.411 Middle(2440MHz) 1.491 1.491±1 2.491 Highest(2480MHz) 2.320 2.320±1 3.32 Worst case: GFSK Channel Maximum Peak Conducted Output Power (dBm) Maximum tune-up Power Calculated value Exclusion threshold SAR Test Exclusion (dBm) (mW) Highest(2480MHz) 2.320 3.32 2.15 0.67 3.0 Yes .......................THE END OF REPORT.........................

ShenzhenMostTechnologyServiceCo.,Ltd. No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark,Nanshan, Shenzhen,Guangdong,China. TESTREPORT FCCRulesPart15.247 ReportReferenceNo........................: FCCID................................................: MTEB24030082-R 2BBGK-I10 Compiledby (position+printedname+signature)..:FileadministratorsAlisaLuo Supervisedby (position+printedname+signature)..:TestEngineerSunnyDeng Approvedby (position+printedname+signature)..: ManagerYvetteZhou Dateofissue.........................................:Mar.12,2024 RepresentativeLaboratoryName.:ShenzhenMostTechnologyServiceCo.,Ltd. Address ................................................. : No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark, Nanshan,Shenzhen,Guangdong,China. Applicant’sname...............................:ShenzhenXinchengTimesTechnologyCo.,Ltd Address.................................................: 104-105,BlockC,DonghaiWangBuilding,No.369BulongRoad, Ma'antangCommunity,BantianStreet,LonggangDistrict, Shenzhen Testspecification/Standard ............ : FCCRulesPart15.247 TRFOriginator......................................:ShenzhenMostTechnologyServiceCo.,Ltd. ShenzhenMostTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenMostTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenMostTechnologyServiceCo.,Ltd.takesnoresponsibilityforandwillnotassume liabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. Testitemdescription........................: ElectricScooter TradeMark...........................: N/A Model/Typereference ......................... : i10 ListedModels ..................................... : i10MAX，i10S，i10Pro，i10Plus,S10，S10S， S10Pro,S10MAX,S10Plus，X10，X10S，X10Pro，X10Plus， X10MAX ModulationType .................................. :GFSK OperationFrequency .......................... :From2402MHzto2480MHz HardwareVersion.................................M0-LO4-V2.06-20230603H/M0-2BLE8-V5.43-20230303 SoftwareVersion...................................8429-05200713510-07F5 Rating.....................................................: 1:DC36V(byBattery) 2:DC42V(byAdapter) Result.....................................................:PASS ReportNo.:MTEB24030082-RPage 2 of 38 TESTREPORT EquipmentunderTest:ElectricScooter Model/Type: i10 ListedModels i10MAX，i10S，i10Pro，i10Plus,S10，S10S， S10Pro,S10MAX,S10Plus，X10，X10S，X10Pro，X10Plus， X10MAX Remark DifferenceinAppearanceandmodelnames Applicant: ShenzhenXinchengTimesTechnologyCo.,Ltd Address: 104-105,BlockC,DonghaiWangBuilding,No.369BulongRoad, Ma'antangCommunity,BantianStreet,LonggangDistrict, Shenzhen Manufacturer: ShenzhenXinchengTimesTechnologyCo.,Ltd Address: 104-105,BlockC,DonghaiWangBuilding,No.369BulongRoad, Ma'antangCommunity,BantianStreet,LonggangDistrict, Shenzhen TestResult:PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:MTEB24030082-RPage 3 of 38 Contents 1.REVISIONHISTORY................................................................................................................4 2.TESTSTANDARDS...................................................................................................................5 3.SUMMARY......................................................................................................................................6 3.1.GeneralRemarks6 3.2.ProductDescription6 3.3.EquipmentUnderTest6 3.4.ShortdescriptionoftheEquipmentunderTest(EUT)6 3.5.EUToperationmode7 3.6.BlockDiagramofTestSetup7 3.7.TestItem(EquipmentUnderTest)Description*7 3.8.AuxiliaryEquipment(AE)Description7 3.9.AntennaInformation*8 3.10.EUTconfiguration8 3.11.Modifications8 4.TESTENVIRONMENT.............................................................................................................9 4.1.Addressofthetestlaboratory9 4.2.Environmentalconditions9 4.3.TestDescription10 4.4.Statementofthemeasurementuncertainty10 4.5.EquipmentsUsedduringtheTest11 5.TESTCONDITIONSANDRESULTS............................................................................12 5.1.ACPowerConductedEmission12 5.2.RadiatedEmission15 5.3.MaximumPeakOutputPower22 5.4.PowerSpectralDensity23 5.5.6dBBandwidthand99%Bandwidth24 5.6.BandEdgeComplianceofRFEmission25 5.7.SpuriousRFConductedEmission27 5.8.AntennaRequirement28 6.TESTSETUPPHOTOSOFTHEEUT..........................................................................29 7.EXTERNALANDINTERNALPHOTOSOFTHEEUT........................................30 APPENDIXI.ConductedPeakOutputPower31 APPENDIXII.99%Bandwidth32 APPENDIXIII.6dBBandwidth33 APPENDIXIV.ConductedOutOfBandEmission34 APPENDIXV.DutyCycle36 APPENDIXVI.PowerSpectralDensity38 ReportNo.:MTEB24030082-RPage 4 of 38 1.RevisionHistory RevisionIssueDateRevisionsRevisedBy 002024.03.12InitialIssueAlisaLuo ReportNo.:MTEB24030082-RPage 5 of 38 2.TESTSTANDARDS Thetestswereperformedaccordingtofollowingstandards: Thetestswereperformedaccordingtofollowingstandards: FCCRulesPart15.247:FrequencyHopping,DirectSpreadSpectrumandHybridSystemsthatarein operationwithinthebandsof902-928MHz,2400-2483.5MHz,and5725-5850MHz. ANSIC63.10:2013:AmericanNationalStandardforTestingUnlicensedWirelessDevices ReportNo.:MTEB24030082-RPage 6 of 38 3.SUMMARY 3.1.GeneralRemarks Dateofreceiptoftestsample:2024.03.05 Testingcommencedon:2024.03.06 Testingconcludedon:2024.03.12 3.2.ProductDescription ProductName:ElectricScooter Model/Typereference:i10 PowerSupply： 1:DC36V(byBattery) 2:DC42V(byAdapter) TestingsampleID：MTYP04433 Bluetooth: SupportedType:BLE Modulation:GFSK Operationfrequency:2402MHz~2480MHz Channelnumber:40 Channelseparation:2MHz Antennatype: PCBAntenna Antennagain:-1.59dBi 3.3.EquipmentUnderTest Powersupplysystemutilised Powersupplyvoltage: ○ 230V/50Hz ○ 120V/60Hz ○ 12VDC ○ 24VDC ● Other(specifiedinbla…

Text truncated - open the document above for the full version.

EquipmentUnderTest(EUT) Description TechnicalInformation Wirel ess Type Bluetooth Test frequency band 2400 MHz~2483.5MHz Bran d nameN/A HardwareVers ionN/A Software VersionN/A IMEI N/A Sample number 1# Summary ITEMANT SPEC Mo del Name 2.4G AN T Frequency 240 0MHz24 10MHz2420 MHz2430 MHz24 40 MHz2450 MHz -2.77 -2.39-1.94 -1.59 -1.64-1.76 2460 MHz2470 MHz2480 MHz2490 MHz2500 MHz -2.38 -2.53-2.64 -2.77 -3.86 MAX . Gain -1.59 .dB Pol arizationHoriz ontal and Vertical AzimuthBeam Pa ttern Omni-directional Impe dance 50 Ohm AntennaLength 11.0mm Ma nufacture GuangzhouLEBIComputerTechnologyCo ., Ltd . AntennaPhoto & Length(mm ) 1.TestSetup 2. 2DRadiationPattern Phi=0° Phi=90° Theta=90° 3.3DRadiationPattern 2400MHz 2440MHz 2480MHz

Model No.: i10 CE TEST SETUP RE TEST SETUP Model No.: i10 RE TEST SETUP