2BBH5-SI123000pure sine wave Inverter

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: ISSYZONE TX INC. FRN: 0036843886 Contact Name: Clarice Xie Address: 10207 S Sam Houston Pkwy W #130, Houston, TX 77071 United States Telephone No: (281) 208-7948 Email: [email protected] Applicant: Company name: Guangzhou Boju Information Technology Co., Ltd. Product Description: pure sine wave Inverter FRN: 0033851213 Grantee Code: 2BBH5 FCC ID: 2BBH5-SI123000 Contact Name: Jack Li Address: Unit L3A03-2 No.31 XiCha Road Baiyun District Guangzhou, Guangdong, China Telephone No: 0769-89087188 Email: [email protected] [Guangzhou Boju Information Technology Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [ISSYZONE TX INC.] is our designated US agent for service of process for the above referenced FCC ID. [Guangzhou Boju Information Technology Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [ISSYZONE TX INC.] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2026-04-27 Applicant’s Name: Jack Li US Agent’s Name: Clarice Xie Title: Manager Title: Manager Signature Signature

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Guangzhou Boju Information Technology Co., Ltd. Grantee code: 2BBH5 FCC ID: 2BBH5-SI123000 FRN: 0033851213 Contact Name: Jack Li Address: Unit L3A03-2 No.31 XiCha Road Baiyun District Guangzhou, Guangdong, China Telephone No: 0769-89087188 Fax No: N/A Email: [email protected] i. [Guangzhou Boju Information Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Guangzhou Boju Information Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Guangzhou Boju Information Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment. Date: 2026-04-27 Applicant’s Name: Jack Li Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Guangzhou Boju Information Technology Co., Ltd. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Device pure sine wave Inverter Company name Guangzhou Boju Information Technology Co., Ltd. Grantee code 2BBH5 FCC ID 2BBH5-SI123000 FRN 0033851213 Contact name Jack Li Address Unit L3A03-2 No.31 XiCha Road Baiyun District Guangzhou, Guangdong, China Telephone number 0769-89087188 E-mail [email protected] Chipset/module information AC6323A Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 3 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. 4 ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Jack Li Date: 2026-04-27 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

Guangzhou Boju Information Technology Co., Ltd. Pr oduct Similarity Declaration Product name: pure sine wave Inverter Model name: SI123000, SI122000, SI121000 FCC ID: 2BBH5-SI123000 We (Guangzhou Boju Information Technology Co., Ltd.) hereby state that all t he models are electrical identical including the same hardware design (i.e., circuit design, RF module/circuit, antenna type(s) and antenna location, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only differ in appearance color, size, rated output power and model name. Detailed differene see below table: Model No. Size Rated Output Power SI123000 17.12*9.37*3.94in / 435*238*100mm 3000W SI122000 14.96*7.4*3.94 in / 380*188*100mm 2000W SI121000 13.78*7.4*3.94in / 350*188*100mm 1000W S ignature: Na me: Jack Li Title: Manager 2026-04-27

TCB CALL página 1 File FCC ID: 2BBH5-SI123000 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ►We checked the FCC FRN Search based on the information provided by the grantee. On the official register from TEXAS: https://comptroller.texas.gov/taxes/franchise/account-status/search/32087704931 TCB CALL página 2 In google: However after deeply investigate I could see: TCB CALL página 3 ►CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter " included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit " C5266091_X23_Ed1_US_Agent_Letter " >

C5266091_X10_Ed.2 1/1 Guangzhou Boju Information Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026-04 -27 Subject: Request for Confidentiality FCC ID: 2BBH5-SI123000 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☒ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☒ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of __180__ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Jack Li Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization < Guangzhou Boju Information Technology Co., Ltd. > Company: Guangzhou Boju Information Technology Co., Ltd. Address: Unit L3A03-2 No.31 XiCha Road Baiyun District Guangzhou, Guangdong, China Product Name: pure sine wave Inverter Model Number: SI123000, SI122000, SI121000 FCC Identifier: 2BBH5-SI123000 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jack Li Date: 2026-04-27 Title: Manager Signature of applicant:

Label Location On EUT Label

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in KDB 447498 D01 V06 and §1.1307(b) CFR Title 47 §2.1091(b): (b) For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. FCC ID: 2BBH5-SI123000 EUT Specification EUT pure sine wave Inverter Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5.825GHz Others: 2.402GHz~2.480GHz BT NFC: 13.56MHz RFID: 125kHz Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Note: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m.AKDB inquiry is required to determine the applicable exposure limits below 100 kHz. Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result BLE worst case: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) 1M 2480 -2.25 -2.25±1 -1.25 2.67 0.0003 1 Test Result: Pass

TEST REPORT Report No.: 8429EU012408W Applicant: Guangzhou Boju Information Technology Co.,Ltd Address: Unit L3A01-2 No.31 XiCha Road Baiyun District, Guangzhou 510407 Guangdong CN Product Name: pure sine wave Inverter Model No.: SI123000 (refer to clause 2.4) Trademark: Bougerv FCC ID: 2BBH5-SI123000 Test Standard(s): 47 CFR Part 15.247 Test Result: Pass Date of Receipt: Mar. 24, 2026 Test Date: Mar. 25, 2026 - Apr. 21, 2026 Date of Issue: Apr. 25, 2026 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: Landon Qiu/ Engineer Sally Zhang/ Manager Page 2 of 54 Report No.: 8429EU012408W TRF Version: A01 Revision Record Report Version Issued Date Description Status V0 Apr. 25, 2026 Original Valid Page 3 of 54 Report No.: 8429EU012408W TRF Version: A01 Table of Contents 1 COVER PAGE ......................................................................................................................................... 1 2 GENERAL INFORMATION ............................................................................................................................... 5 2.1 APPLICANT INFORMATION ........................................................................................................................ 5 2.2 MANUFACTURER INFORMATION ................................................................................................................ 5 2.3 FACTORY INFORMATION .......................................................................................................................... 5 2.4 GENERAL DESCRIPTION OF E.U.T. ........................................................................................................... 5 2.5 TECHNICAL INFORMATION OF E.U.T. ........................................................................................................ 6 3 TEST SUMMARY .............................................................................................................................................. 7 3.1 TEST STANDARD ..................................................................................................................................... 7 3.2 TEST VERDICT ........................................................................................................................................ 7 3.3 TEST LABORATORY ................................................................................................................................. 8 4 TEST CONFIGURATION .................................................................................................................................. 9 4.1 TEST ENVIRONMENT ............................................................................................................................... 9 4.2 TEST EQUIPMENT ................................................................................................................................... 9 4.3 DESCRIPTION OF SUPPORT UNIT ........................................................................................................... 11 4.4 TEST MODE .......................................................................................................................................... 11 4.5 DESCRIPTION OF CALCULATION ............................................................................................................. 11 4.5.1 Field Strength Calculation ..................................................................................................... 11 4.5.2 Disturbance Calculation ........................................................................................................ 11 4.6 MEASUREMENT UNCERTAINTY ............................................................................................................... 12 4.7 DEVIATION FROM STANDARDS ............................................................................................................... 12 4.8 ABNORMALITIES FROM STANDARD CONDITION ....................................................................................... 12 5 EVALUATION RESULTS (EVALUATION) ...................................................................................................... 13 5.1 ANTENNA REQUIREMENT ....................................................................................................................... 13 5.1.1 Test Specification .................................................................................................................. 13 5.1.2 Test Data ............................................................................................................................... 13 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) .................................................................................... 14 6.1 6DB BANDWIDTH .................................................................................................................................. 14 6.1.1 Test Specification .................................................................................................................. 14 6.1.2 E.U.T. Operation .................................................................................................................... 14 6.1.3 Test Setup Diagram ............................................................................................................... 15 6.1.4 Test Data ............................................................................................................................... 15 6.2 MAXIMUM CONDUCTED OUTPUT POWER ................................................................................................ 16 6.2.1 Test Specification .................................................................................................................. 16 6.2.2 E.U.T. Operation .................................................................................................................... 16 6.2.3 Test Setup Diagram .......................................................…

Text truncated - open the document above for the full version.

PengBanXingYeShenZhenTechnologyCo.,Ltd Address：Room608,Building4,1970ScienceandTechnologyTown,MinzhiStreet,LonghuaDistrict,Shenzhen. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± PengBanXingYeShenZhenTechnologyCo.,Ltd SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 产品规格承认书 SPECIFICATIONS 客户: CUSTOMER: 产品名称: DESCRIPTION:Bipolarantenna 客户型号: CUSTOMERPARTNo: 产品型号: OURMODELNO:PBX3216HC01 日期: DATE: 确认签字,盖章后请返回承认书一份 PLEASERETURNTOUSONECOPYOF“SPECIFICATIONFORAPPROVAL” WITHYOURAPPROVEDSIGNATURES ApprovedLiuFeiAuditLiuFeiMakingLiuXiaoMei CustomerAcknowledgesSignature Date PengBanXingYeShenZhenTechnologyCo. , Ltd Address：Room608,Building4,1970Scienceand TechnologyTown,MinzhiStreet,LonghuaDistrict,Shenzhen. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ AN G L E S＝ ± H O L E D I A＝ ± PengBanXingYeShenZhenTechnologyCo. , Ltd SCALE：N/AUNIT：mm THESEDRAWINGSAND SPECIFICATIONSARE THE PROPERTYOF PBXY TECHNOLOGYLimitedAND SHALLNOT BE REPRODUCEDOR USEDAS THE BASISFOR THE MANUFACTUREOR SALEOF APPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY : SeraCHECKEDBY: XD DESIGNEDBY: SeraAPPROVEDBY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPECREV. P1 PBX3216HC01Specification OperatingTemp. : -40 °C ~+85 °C 1.FEATURES: ●Light weight,compact ●Wide bandwidth,low cost ●Built-inantennawith high gain 2.APPLICATIONS: ●Bluetooth,WirelessLAN, MobileTV ●HomeRF System,etc 3. PRODUCTIDENTIFICATION (1)(2)(3) (1) Producttype: Multilayerchip Antenna (2) CenterFrequency: 2450MHz (3) ExternalDimensions(L ×W) (mm) : 3.2 *1. 6 4. SHAPEAND DIMENSIONS: LWHA 3.2±0.21.6±0.2 0.52±0.10.4±0.1 CH IP45 032 2 16 PengBanXingYeShenZhenTechnologyCo.,Ltd Address：Room608,Building4,1970ScienceandTechnologyTown,MinzhiStreet,LonghuaDistrict,Shenzhen. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± PengBanXingYeShenZhenTechnologyCo.,Ltd SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 Testplatereferencesize ： Company ： mm PengBanXingYeShenZhenTechnologyCo.,Ltd Address：Room608,Building4,1970ScienceandTechnologyTown,MinzhiStreet,LonghuaDistrict,Shenzhen. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± PengBanXingYeShenZhenTechnologyCo.,Ltd SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 Holepunchingreferencediagram APPLICATIONGUIDE 5.SPECIFICATIONS: *Testcondition:Testboardsize90*40mm Matchingcircuit:Pimatchingcircuitwillberequired PengBanXingYeShenZhenTechnologyCo.,Ltd Address：Room608,Building4,1970ScienceandTechnologyTown,MinzhiStreet,LonghuaDistrict,Shenzhen. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± PengBanXingYeShenZhenTechnologyCo.,Ltd SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 6.ElectricalCharacteristics: Returnloss Standingwaveratio MarkFrequencyVSWR 12400MHz1.513 22440MHz1.068 32480MHz1.464 PengBanXingYeShenZhenTechnologyCo.,Ltd Address：Room608,Building4,1970ScienceandTechnologyTown,MinzhiStreet,LonghuaDistrict,Shenzhen. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± PengBanXingYeShenZhenTechnologyCo.,Ltd SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 RadiationPattern TheGainpatternismeasuredinFAR-fieldchamber.DUTisplacedonthetableofrotator,a standardhornantennaandVectorNetworkAnalyzerisusedtocollectdata. ◎Efficiency Maximumgain PengBanXingYeShenZhenTechnologyCo.,Ltd Address：Room608,Building4,1970ScienceandTechnologyTown,MinzhiStreet,LonghuaDistrict,Shenzhen. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± PengBanXingYeShenZhenTechnologyCo.,Ltd SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 ◎ 3DGainPattern(2400MHz) ◎ 3DGainPattern(2440MHz) ◎ 3DGainPattern(2480MHz) PengBanXingYeShenZhenTechnologyCo.,Ltd Address：Room608,Building4,1970ScienceandTechnologyTown,MinzhiStreet,LonghuaDistrict,Shenzhen. UNLESSOTHERSPECIFIEDTOLERANCESON： X＝±X.X＝±X.XX＝ ANGLES＝ ± HOLEDIA＝ ± PengBanXingYeShenZhenTechnologyCo.,Ltd SCALE：N/AUNIT：mm THESEDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFPBXY TECHNOLOGYLimitedANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION DRAWNBY:SeraCHECKEDBY:XD DESIGNEDBY:SeraAPPROVEDBY:XD TITLE：CHIP2450-3216Specification DOCUMENT NO. 3216 SPECREV. P1 7.EnvironmentalCharacteristics (1)ReliabilityTest (2)StorageCondition (a)Atwarehouse: Thetemperatureshouldbewithin0~30°Candhumidityshouldbelessthan60%RH. Theproductshouldbeusedwithin1yearfromthetimeofdelivery. (b)Onboard: Thetemperatureshouldbewithin-40~85°Candhumidityshouldbelessthan85%RH. (3)Opera…

Text truncated - open the document above for the full version.