2BBO7-MYH-RRF remote

16.4 ft MULTIFUNCTION TAPE LIGHT RUBAN DE LUMIÈRES MULTIFONCTION DE 5 m PREPARATION/PRÉPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Avant de commencer l'assemblage du produit, assurez-vous que toutes les pièces sont présentes. Comparez les pièces avec la liste du contenu de l'emballage et la liste du contenu du matériel. Si une pièce est manquante ou endommagée, n'essayez pas d'assembler le produit. Estimated Assembly Time: 15 minutes Temps d'assemblage estimé: 15 minute CORRECTIVE ACTION MESURES CORRECTIVES TOOLS REQUIRED / OUTILS REQUIS: Thank you for purchasing this Danson Decor product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. If you have any questions or problems, please call our customer service department at 1-800-363-1865, 8:30 a.m. to 4:30 p.m. EST, Monday - Friday. Merci d'avoir acheté ce produit Danson Décor. Nous avons créé ces instructions faciles à suivre pour vous assurer que vous passez votre temps à profiter du produit au lieu de l'assembler. Si vous avez des questions ou des problèmes, veuillez appeler notre service à la clientèle au 1-800-363-1865, de 8 h à 16h 30 h, HAE, du lundi au vendredi. TROUBLESHOOTING/DÉPANNAGE PROBLEM PROBLÈME POSSIBLE CAUSE CAUSE POSSIBLE CORRECTIVE ACTION MESURES CORRECTIVES If the light do not work Les lumières ne fonctionnent pas Connection problem in between rope. Problème de connexion entre la corde. Multiple connection does not work. Connexion multiple ne fonctionne pas Remote does not work La télécommande ne fonctionne pas A plastic tab prevents contact with the battery. Une languette de platique empêche le contact de la pile. The battery is weak or empty La piles est faible ou vide Burned fuse(s). Fusible(s) brulée(s). No current Pas de courant Make sure that the contacts in the coaxial sockets are fully inserted into each other. S'assuzez que les contacts dans les prises coaxiale sont bien enfoncer l'une dans l'autre Replace the battery (CR2025) Remplacer la pile (CR2025) Remove the plastic tab from the remote. Retirez la languette en plastique de la télécommande Replace 1 or all the fuses following the instructions Remplacer 1 ou toutes les fusibles en suivant les instructions Make sure lights are connected Vérifiez que la prise de courant est alimentée en électricité. 4 3 2 1) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. 2) Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. 3) Remove fuse carefully. 4) Risk of fire. Replace fuse only with 3 Amp, 125 V fuse (provided with product). 5) Close fuse cover. Slide closed the fuse access cover on top of attachment plug. 6) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged. 1) Saisissez la fiche et retirez-la de la prise ou de toute autre source d’alimentation. Ne débranchez pas l’article en tirant sur le cordon d’alimentation. 2) Ouvrez le couvercle du fusible. Faites glisser le couvercle d’accès au fusible sur le dessus de la fiche et vers les lames pour l’ouvrir. 3) Retirez le fusible avec précaution. 4) Risque d’incendie. Remplacez uniquement avec un fusible de 3 Amp, 125 V (fourni avec le produit). 5) Refermez le couvercle du fusible. Faites glisser le couvercle d’accès au fusible sur le dessus de la fiche. 6) Risque d’incendie. Ne remplacez pas la fiche. Elle contient un dispositif de sécurité (fusible) qui ne doit pas être retiré. Jetez le produit si la fiche est endommagée. SAFETY INFORMATION/INFORMATIONS DE SÉCURITÉ CARE AND MAINTENANCE/ENTRETIEN 1) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in a lamp holders or enclosures, loose connections or exposed coper wire. 2) When storing the product, carefully remove the product from wherever it is placed, including trees, branched or bushes, to avoid any undue strain or stress on the product conductors, connections and wires. 3) When not use, store neatly in a cool, dry location protected from sunlight. 4) Do not impact or drop the transformer. If plastic is broken, discard adaptor. 1) Avant d'utiliser ou de réutiliser, inspectez soigneusement le produit. Jeter tous les produits qui ont coupé, endommagé ou effiloché l'isolant ou les cordons, les fissures dans les supports de lampe ou les boîtiers, les connexions desserrées ou le fil de cuivre exposé. 2) Lors du stockage du produit, retirez soigneusement le produit de l'endroit où il est placé, y compris les arbres, les branches ou les buissons, pour éviter toute tension ou contrainte excessive sur les conducteurs, les connexions et les fils du produit. 3) Lorsqu'il n'est pas utilisé, conservez-le soigneusement dans un endroit frais et sec à l'abri des rayons du soleil. 4) Ne pas heurter ni faire tomber le transformateur. Si le plastique est cassé, jetez l'adaptateur. WARNING READ AND FOLLOW ALL SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: • When using outdoor-use portable lighting products, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. • When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. • Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to be used for the outdoor-use flexible lighting product. Receptacles are available having built-in GFCI protection for this measure of safety. • Use only outdoor …

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: FCC US Agent, LLC FRN: 0033402884 Contact Name: Tim Payne Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Telephone No: (708) 571-3148 Email: [email protected] Applicant: Company name: MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Product Description:RF remote Grantee code: 2BBO7 FCC ID: 2BBO7-MYH-R Contact Name: Cynthia Huang Address: Du Bi Village Duruan Town Jiangmen, Guangdong Province, China Telephone No: 0750-3651966 Email: [email protected] [MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD] certifies that, as of the date of this filing of the application with the TCB, [FCC US Agent, LLC] is our designated US agent for service of process for the above referenced FCC ID. [MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [FCC US Agent, LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2023/06/16 Applicant’s Name: Cynthia Huang US Agent’s Name: Tim Payne Title: Senior Merchandiser Title: Manager Signature: Signature:

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Grantee code: 2BBO7 FCC ID: 2BBO7-MYH-R Contact Name: Cynthia Huang Address: Du Bi Village Duruan Town Jiangmen, Guangdong Province, China Telephone No: 0750-3651966 Fax No: 0750-3650918 Email: [email protected] MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. i. MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 2023/06/16 Applicant’s Name: Cynthia Huang Title: Merchandiser Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 Letter of Authorization MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Company: MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Address: Du Bi Village Duruan Town Jiangmen, Guangdong Province, China Product Name:RF remote Model Number: MYH-R FCC Identifier: 2BBO7-MYH-R We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Cynthia Huang Date: 2023/06/16 Title: Merchandiser Signature of applicant:

C5266091_X10_Ed.1 1/1 MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023/06/16 Subject: Request for Confidentiality FCC ID: 2BBO7-MYH-R To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_ days from the date of the Grant of Equipment Authorization and prior to marketing. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Cynthia Huang Title: Merchandiser C5266091_X10_Ed.1 1/1

MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Du Bi Village Duruan Town Jiangmen, Guangdong Province, China DATE : Jun. 16, 2023 MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Du Bi Village Duruan Town Jiangmen, Guangdong Province, China Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint below company and person: Name Damon Hu Position Manager Company Name Dongguan Dongdian Testing Service Co.,Ltd. Address 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel / Fax Tel: +86-0769-38826678-850 E-Mail [email protected] to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. Applicant name MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Address Du Bi Village Duruan Town Jiangmen, Guangdong Province, China Yours sincerely, Name Cynthia Huang Position Merchandiser Company Name MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Address Du Bi Village Duruan Town Jiangmen, Guangdong Province, China Tel / Fax 0750-3651966 / 0750-3650918 E-Mail [email protected]

Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23052906-2E Page 1 of 6 AppendixI: Photos of the EUT Product Name : RF remote Model Number : MYH-R Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23052906-2E Page 2 of 6 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23052906-2E Page 3 of 6 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23052906-2E Page 4 of 6

Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23052906-2E Page 4 of 6 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23052906-2E Page 5 of 6 433M Ant. Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q23052906-2E Page 6 of 6 END

Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-RE23052906-2E02 TRF No.: KDB447498 D01 Ver.1.0 Page 1 of 6 RF EXPOSURE REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Address : Du Bi Village Duruan Town Jiangmen, Guangdong Province, China Equipment under Test : RF remote Model No. : MYH-R Trade Mark : N/A FCC ID : 2BBO7-MYH-R Manufacturer : MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Address : Du Bi Village Duruan Town Jiangmen, Guangdong Province, China Report No.: DDT-RE23052906-2E02 Issued Date: Jun. 10, 2023 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-RE23052906-2E02 TRF No.: KDB447498 D01 Ver.1.0 Page 2 of 6 Table of Contents Test report declares.......................................................................................................3 1. General Information .................................................................................................................. 5 1.1. Description of equipment ......................................................................................................... 5 1.2. Assess laboratory ..................................................................................................................... 5 2. RF Exposure evaluation for FCC ........................................................................................... 6 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-RE23052906-2E02 TRF No.: KDB447498 D01 Ver.1.0 Page 3 of 6 Test Report Declare Standard Used: KDB447498 D01 General RF Exposure Guidance v06 We Declare: The equipment described above is assessed by Dongguan Dongdian Testing Service Co., Ltd and in the configuration assessed the equipment complied with the standards specified above. The assessed results are contained in this report and Dongguan Dongdian Testing Service Co., Ltd is assumed of full responsibility for the accuracy and completeness of these assess. After evaluation, our opinion is that the equipment In Accordance with above standard. Report No: DDT-RE23052906-2E02 Date of Receipt: May 29, 2023 Date of Test: May 29, 2023 ~ Jun. 10, 2023 Prepared By: Approved By: ___________________ ______________________ Tiger Mo/Engineer Damon Hu/EMC Manager Note: This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Dongguan Dongdian Testing Service Co., Ltd. Applicant : MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Address : Du Bi Village Duruan Town Jiangmen , Guangdong Province，China Equipment under Test : RF remote Model No. : MYH-R Trade Mark : N/A Manufacturer : MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Address : Du Bi Village Duruan Town Jiangmen , Guangdong Province，China E S T T I N N A I G D S G E N R O V D I C E N A C U O G . , G L N T O D D . Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-RE23052906-2E02 TRF No.: KDB447498 D01 Ver.1.0 Page 4 of 6 Revision History Rev. Revisions Issue Date Revised By --- Initial issue Jun. 10, 2023 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-RE23052906-2E02 TRF No.: KDB447498 D01 Ver.1.0 Page 5 of 6 1. General Information 1.1. Description of equipment 1.2. Assess laboratory Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808. Tel.: +86-0769-38826678, http://www.dgddt.com, Email: [email protected]. CNAS Accreditation No. L6451; A2LA Accreditation Number: 3870.01 FCC Designation Number: CN1182, Test Firm Registration Number: 540522 Innovation, Science and Economic Development Canada Site Registration Number: 10288A Conformity Assessment Body identifier: CN0048 VCCI facility registration number: C-20087, T-20088, R-20123, R-20155, G-20118 EUT Name : RF remote Model Number : MYH-R EUT function description : Please reference user manual of this device Power Supply : Battery 1.5V*2(Size: AAA) Operation frequency : 433.92MHz Modulation : OOK Antenna Type : PCB antenna, maximum PK gain:-7.76 dBi Sample Number : S23052906-02 for conductive S23052906-03 for radiation Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-RE23052906-2E02 TRF No.: KDB447498 D01 Ver.1.0 Page 6 of 6 2. RF Exposure evaluation for FCC According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Manufacturing Tolerance SRD GFSK (Peak) Frequency (MHz) 433.92 Target (dBm) -18.86 Tolerance ±(dB) 1 Note: PK Output Power=76.34dBuV/[email protected]=-18.86dBm Please refer to the test report “DDT-R23031611-2E01” Estimtion Result Worse case is as below: [433.92 MHz, -17.86 dBm, (0.016 mW) output power] (0.016 /5) ·[√0.43392(GHz)] = 0.002 < 3.0 for 1-g SAR Then SAR evaluation is not required. END OF REPORT

ReportNo.:RFI-LAB-RF-202305-EE35 QP030-E41 Page1of10 TestingReport CustomerName:MINGYUNGHUNGMATERIALOFLIGHTS CO.,LTD ProductName:RFremote SampleModel:MYH-R ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2023.6.5 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202305-EE35 QP030-E41 Page2of10 Version VersionNo.DateDescriptionFormulateApproval A02023.6.5Forthefirsttime,formulateZkrisEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4EUTsetupphotooffreespaceOTAtesting.........................................................................6 3.TestResults.....................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................8 3.3.1VSWRparameters.....................................................................................................8 3.3.2VSWRdata................................................................................................................8 3.3.3Typicalfreespaceefficiencyandgain......................................................................8 3.3.4Typicalfreespaceradiationpattern...........................................................................9 （Thefollowingisblank）..............................................................................................................10 ReportNo.:RFI-LAB-RF-202305-EE35 QP030-E41 Page3of10 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13682621346 E-mail [email protected] Equipment AlltheequipmentusedinthereportisfixedinZoneB,WestSideof1/F,Building1, TingweiIndustrialPark,No.6LiufangRoad,Bao'anDistrict,Shenzhen 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202305-EE35 QP030-E41 Page4of10 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date OTATest System RayZone-5000 RFI-LAB-RF -D00 GTS2023.3.142025.3.13 Network Analyzer E5071C RFI-LAB-RF -D01 KEYSIGHT2023.5.112024.5.10 Network Analyzer E5071C RFI-LAB-RF -C02 KEYSIGHT2023.5.112024.5.10 1.4Testenvironment Temperature 24.2°C Humidity 59%RH Pressure 100.15kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202305-EE35 QP030-E41 Page5of10 2.SampleInformation 2.1Clientinformation Name MINGYUNGHUNGMATERIALOFLIGHTSCO.,LTD Address DuBiVillageDuruanTownJiangmen,GuangdongProvince,China Contacts Cynthia Tel 15113954601 E-mail [email protected] Manufacturer MINGYUNGHUNGMATERIALOFLIGHTSCO.,LTD Manufacturer Address DuBiVillageDuruanTownJiangmen,GuangdongProvince,China 2.2DescriptionofEUT(S) ProductName RFremote SampleModel MYH-R AntennaSize / SerialNo. / AntennaType PCBAntenna TestItem VSWR;Antennagain;Efficiency;Radiationpattern FrequencyRange 428-438MHz ReceivedDate 2023.5.31 TestDate 2023.6.1 Remark ThelengthoftheRFcableis90mm ReportNo.:RFI-LAB-RF-202305-EE35 QP030-E41 Page6of10 2.3EUTappearance 2.4EUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202305-EE35 QP030-E41 Page7of10 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern VSWR Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-1979 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty VSWR±0.3 Antennagain±0.72dB Radiationefficiency±0.72dB ReportNo.:RFI-LAB-RF-202305-EE35 QP030-E41 Page8of10 3.3Testdata 3.3.1VSWRparameters 3.3.2VSWRdata 3.3.3Typicalfreespaceefficiencyandgain Frequency/MHz 428433438 VSWR 10.08210.76311.1…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-RE23052906-2E01 TRF No.: FCC Part 15.231 Ver.1.0 Page 1 of 30 FCC CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Address : Du Bi Village Duruan Town Jiangmen, Guangdong Province, China Equipment under Test : RF remote Model No. : MYH-R Trade Mark : N/A FCC ID : 2BBO7-MYH-R Manufacturer : MING YUNG HUNG MATERIAL OF LIGHTS CO.,LTD Address : Du Bi Village Duruan Town Jiangmen, Guangdong Province, China Report No.: DDT-RE23052906-2E01 Issued Date: Jun. 10, 2023 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-RE23052906-2E01 TRF No.: FCC Part 15.231 Ver.1.0 Page 2 of 30 Table of Contents Test report declares......................................................................................................3 1 Summary of test results ................................................................................................. 6 2 General test information ................................................................................................. 7 2.1. Description of EUT ......................................................................................................... 7 2.2. Accessories of EUT ........................................................................................................ 7 2.3. Assistant equipment used for test .................................................................................. 7 2.4. Block diagram of EUT configuration for test .................................................................. 7 2.5. Deviations of test standard............................................................................................. 7 2.6. Test environment conditions .......................................................................................... 7 2.7. Test laboratory ............................................................................................................... 8 2.8. Measurement uncertainty ............................................................................................... 8 3 Equipment Used During Test ......................................................................................... 9 4. On Time and Duty Cycle .............................................................................................. 10 4.1. Block diagram of test setup .......................................................................................... 10 4.2. Limits ............................................................................................................................ 10 4.3. Test Procedure ............................................................................................................. 10 4.4. Test Result ................................................................................................................... 10 4.5. Original test data .......................................................................................................... 11 5. 20dB Bandwidth and 99% Bandwidth .......................................................................... 12 5.1. Block diagram of test setup .......................................................................................... 12 5.2. Limits ............................................................................................................................ 12 5.3. Test Procedure ............................................................................................................. 12 5.4. Test Result .........................…

Text truncated - open the document above for the full version.