2BBOEPRESSUREDOT001PressureDOT GI Monitoring System

"PressureDOT ® " GI Monitoring System PDT-001 User Manual For GI Motility Monitoring V1.0 Doc ID: PDT001-MDF01 2023.07.07 Copyrights Text, graphics, logos and images in this manual are the property of Dotspace Inc. and protected by United States and international copyright laws. This Manual may not be transferred or reproduced in any form without the written permission of Dotspace Inc. Copyright © 2022~2028 Dotspace Inc. All Rights Reserved. Trademarks PressureDot® is a registered trademark of Dotspace Inc. Such mark is protected by United States common law, federal and/or international trademark laws and may not be used in violation of Dotspace Inc.’s rights. Patents Certain uses and features of the products referenced herein are protected by one or more United States and international patents or have pending patent applications. Federal Communications Commission (FCC) 15.105(a) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. For portable operation, this device has been tested and meets FCC RF exposure guidelines. When used with an accessory that contains metal may not ensure compliance with FCC RF exposure guidelines. Limited Warranties The PressureDOT GI Monitoring System Dotspace Inc. warrants the system* for a period of one (1) year from date of purchase, and that the components of the system* have been designed, manufactured, packaged, and tested and, if properly used, are free from any defect of workmanship or materials that would materially and adversely affect their intended use. If any component of the system* fails during the period of this Limited Warranty for reasons covered by this Limited Warranty, Dotspace Inc, at its option, shall replace the specific failed component. This Limited Warranty does not cover failure occurring in connection with or arising out of uses not intended by Dotspace Inc, misuse, neglect, alteration, repair, improper installation, or improper testing. Without limiting the generality of the foregoing statement, this Limited Warranty shall be invalidated if any repairs, services, or modifications are made to any of the components by any person not explicitly authorized by Dotspace Inc. Dotspace Inc. is not liable or otherwise responsible for any loss, damage, or expense arising, directly or indirectly, from the use of the system* or PressureDOT capsule. Without limiting the generality of the foregoing statement, customers are liable for all matters beyond Dotspace Inc.’s control such as handling, storage, cleaning, misuse, treatment, and diagnosis. This Limited Warranty is in lieu of and excludes all other warranties, whether expressed or implied, including without limitation warranties of merchantability or fitness. Extended Warranty Options are available. * Only the PressureDOT Capsule and reader of the PressureDOT GI Monitoring System are covered by this Limited Warranty: The PressureDOT Capsule Dotspace Inc. warrants each Capsule is free from defects in workmanship and materials until the Capsule’s labeled expiration date. If Dotspace Inc. verifies capsule failure during the warranty period for reasons covered by the Limited Warranty, Dotspace shall replace the failed capsule. Additional Limitations The Limited Warranty does not cover software or damages due to misuse, neglect, alteration, repair, improper installation, set-up, calibration, or improper testing. Dotspace Inc. is not liable for any incidental or consequential loss, damage, or expense arising, directly or indirectly, from the use of the system or capsule. Customers are liable for all matters beyond Dotspace Inc.’s control such as handling, storage, cleaning, misuse, treatment, and diagnosis. This warranty is in lieu of and excludes all other warranties whether expressed or implied warranties of merchantability or fitness. DOTSPACE INC 1209 N ORANGE ST WILMINGTON, DE, 19801, USA. FCC ID: 2BBOEPRESSUREDOT001 This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Table of Content Introduction and Components 1 Using this Manual 2 System Components 2 PressureDOT Capsule Clamshell 2 Reader 6 System Computer and PDot_Plotter Software 9 Use and Care of the System 12 Intended Use/Indications for Use 12 Contraindications for Use 13 Storage 14 Power Requirements 15 Recycling and Disposal Instructions 15 Device Marking 15 Care, Cleaning and Maintenance 18 Firmware Update 19 Troubleshooting and Support 19 Prepare for a Test 20 Preparing the Patient 20 Starting a Test 23 Performing the Test 23 Step 1: Activate the Capsule 23 Step 2: Connect to the Reader 24 Step 3: Ingestion 24 Reader Instruction 26 Data Collected During Capsule Low Voltage 33 Setting-Up the Pdot_Plotter Software 34 Ending a Test 34 Confirming Capsule Exit 34 Getting Started for data reading 35 Suggested Supporting Software Setting-Up 35 Aborting a Test – Deactivating the Capsule 39 Declaration 41 Electromagneti…

Text truncated - open the document above for the full version.

DOTSPACE INC. 1209 Orange Street, Wilmington, County of New Castle, DE 19801, US Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 19, 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2BBOEPRESSUREDOT001 [DOTSPACE INC.] (“the applicant”) certifies that, as of the date of the filing of the application, [DOTSPACE INC.] is our designated U.S. agent for service of process for the above referenced FCC ID. [ DOTSPACE INC.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [DOTSPACE INC.] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Sincerely, Designated U.S. Agent Information: Name: DOTSPACE INC. FRN:0033889841 Contact Person: Uei-Ming Jow Address: 1209 Orange Street, Wilmington, DE 19801, United States Tel.: (919) 457-7577 Email: [email protected] U.S. Agent Signature: Applicant: Company Name: DOTSPACE INC. Contact Person: Uei-Ming Jow Address: 1209 Orange Street, Wilmington, DE 19801, United States Tel.: (919) 457-7577 Email: [email protected] Applicant Signature:

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name DOTSPACE INC. Address 1209 Orange Street, Wilmington, DE 19801, United States Grantee Code 2BBOE FCC ID 2BBOEPRESSUREDOT001 Authorized Contact Name Uei-Ming Jow Contact Email [email protected] Contact Phone (919) 457-7577 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List ☒ [DOTSPACE INC.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. ☒ [DOTSPACE INC.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2023/06/19 Print Name: Uei-Ming Jow Title: CEO *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

DOTSPACE INC. 1209 Orange Street, Wilmington, County of New Castle, DE 19801, US 1209 Orange Street, Wilmington, County of New Castle, DE 19801, US 1209 Orange Street, Wilmington, County of New Castle, DE 19801, US ATTESTATION Date: July 7, 2023 RE: Special conditions for Long-term confidentiality FCC ID: 2BBOEPRESSUREDOT001 Dear Examiner, Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of internal photo exhibits. This device complies with the special conditions set out in the KDB 726920 D01 section II. 1. This device is restricted to be used in health center for medical purpose and are not available for general consumers. 2. The device is completely sealed, and the internal module is protected by the mechanical structure which could sustain more than 40kg (or 130kg/cm^2, or 1,850 psi) biting force. Also, the capsule is not reusable and not repairable, thus, any failure of the capsule will be directly discarded and replaced with another new capsule. Any attempt to disassemble the capsule would cause permanent damage to the device. 3. All sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Please refer the attachment for the example of the NDA between the grantee and a purchaser. Signature: Title / Name (Printed): CEO / Uei-Ming Jow On behalf of: DOTSPACE INC.

Page 1 of 4 DOTSPACE INC. NON-DISCLOSURE AGREEMENT This Nondisclosure Agreement (this “Agreement”), effective July 3rd, 2023 (“Effective Date”), is entered into by and between DOTSPACE INC, (“Company”) and _________________________ (“Recipient”) (each herein referred to individually as a “Party,” or collectively as the “Parties”). In consideration of the covenants and conditions contained herein, the Parties hereby agree to the following: 1. PURPOSE The Parties wish to explore a business opportunity of mutual interest [medical vital sign measurement] (the “Opportunity”), and in connection with the Opportunity, Company has disclosed, and may further disclose to Recipient certain confidential technical and business information that Company desires Recipient to treat as confidential. 2. CONFIDENTIAL INFORMATION A. Definition. “Confidential Information” means any information (including any and all combinations of individual items of information) disclosed by Company to Recipient, including any information disclosed prior to the Effective Date, either directly or indirectly in writing, orally or by inspection of tangible objects (including, without limitation, research, product plans, products, services, equipment, customers, markets, software, inventions, discoveries, ideas, processes, designs, drawings, hardware, formulations, specifications, product configuration information, marketing and finance documents, prototypes, samples, data sets, and equipment), whether or not designated as “confidential” at the time of disclosure. Confidential Information may also include information of a third party that is in Company’s possession and is disclosed to Recipient under this Agreement. B. Exceptions. Confidential Information shall not, however, include any information that Recipient can establish: (i) was publicly known or made generally available without a duty of confidentiality prior to the time of disclosure to Recipient by Company; (ii) becomes publicly known or made generally available without a duty of confidentiality after disclosure to Recipient by Company through no action or inaction of Recipient; or (iii) is in the rightful possession of Recipient without confidentiality obligations at the time of disclosure by Company to Recipient as shown by Recipient’s then-contemporaneous written files and records kept in the ordinary course of business; provided that any combination of individual items of information shall not be deemed to be within any of the foregoing exceptions merely because one or more of the individual items are within such exception, unless the combination as a whole is within such exception. C. Compelled Disclosure. If Recipient becomes legally compelled to disclose any Confidential Information, other than pursuant to a confidentiality agreement, Recipient will provide Company prompt written notice of such disclosure and will assist Company in seeking a protective order or another appropriate remedy. If Company waives Recipient’s compliance with this Agreement or fails to obtain a protective order or other appropriate remedy, Recipient will furnish only that portion of the Confidential Information that is legally required to be disclosed; provided that any Confidential Information so disclosed shall maintain its confidentiality protection for all purposes other than such legally compelled disclosure. Page 2 of 4 3. NON-USE AND NON-DISCLOSURE Recipient shall not use any Confidential Information for any purpose except to evaluate and engage in discussions concerning the Opportunity. Recipient shall not disclose any Confidential Information or permit any Confidential Information to be disclosed, either directly or indirectly, to any third party without Company’s prior written consent. Recipient shall not disclose Confidential Information or permit the disclosure of Confidential Information to its employees, except that Recipient may disclose Confidential Information to those employees of Recipient who are required to have the information in order for Recipient to evaluate or engage in discussions concerning the Opportunity; provided that such employee has signed a non-use and non-disclosure agreement in content at least as protective as the provisions hereof, prior to any disclosure of Confidential Information to such employee. Recipient shall not reverse engineer, disassemble, or decompile any prototypes, software, samples, or other tangible objects that embody the Confidential Information. 4. MAINTENANCE OF CONFIDENTIALITY Recipient shall take reasonable measures to protect the secrecy of and avoid disclosure and unauthorized use of the Confidential Information. Without limiting the foregoing, Recipient shall take at least those measures it employs to protect its own most highly confidential information. Recipient shall not make any copies of the Confidential Information unless the same are previously approved in writing by Company. Recipient shall reproduce Company’s proprietary rights notices on any such authorized copies, in the same manner in which such notices were set forth in or on the original. Recipient shall immediately notify Company of any unauthorized use or disclosure, or suspected unauthorized use or disclosure, of Confidential Information. 5. NO OBLIGATION Nothing in this Agreement shall obligate either Party to proceed with any transaction between them, and each Party reserves the right, in its sole discretion, to terminate the discussions contemplated by this Agreement concerning the Opportunity. Nothing in this Agreement shall be construed to restrict Company’s use or disclosure of its own Confidential Information. 6. NO WARRANTY ALL CONFIDENTIAL INFORMATION IS PROVIDED “AS IS.” COMPANY MAKES NO WARRANTIES, EXPRESS, IMPLIED OR OTHERWISE, REGARDING THE ACCURACY, COMPLETENESS OR PERFORMANCE OF ANY CONFIDENTIAL INFORMATION, OR WITH RESPECT TO NON-INFRINGEMENT OR OTHER VIOLATION OF ANY INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY OR OF RECIPIENT. 7. RETURN OF…

Text truncated - open the document above for the full version.

DOTSPACE INC. 1209 Orange Street, Wilmington, County of New Castle, DE 19801, US Date: June 19, 2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: 2BBOEPRESSUREDOT001 To whom it may concern: We, the undersigned, hereby authorize Jim Chang, SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Agency Agreement Expiration Date: June 18, 2024 This authorization is valid until further written notice from the applicant. Sincerely, Signature: ____________________ Printed Name /Title: Uei-Ming Jow / CEO Company Name: DOTSPACE INC.

DOTSPACE INC. 1209 Orange Street, Wilmington, County of New Castle, DE 19801, US Date: July 4, 2023 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2BBOEPRESSUREDOT001 Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of (180) days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term Operation Description ☒ Permanent ☐ Short Term Software defined radio & security info ☐ Permanent ------------------ Parts List & Placement/BOM ☐ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☒ Permanent* ☐ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed : Printed name: Uei-Ming Jow Title: CEO Company Name: DOTSPACE INC.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2305001238E2-P Page: 1 of 2 External Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2305001238E2-P Page: 2 of 2

DOTSPACE INC. 1209 Orange Street, Wilmington, County of New Castle, DE 19801, US Declaration Date: June 19, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Examiner: We decla re that this equipment (Product Name: PressureDOT GI Monitoring System, FCC ID: 2BBOEPRESSUREDOT001) complies with e-CFR Title 47 Part 2.925 (f), a s it is too small to be labeled with FCC ID (smaller than 4-6 points). Hence the FCC ID is placed in user manual and packaging instead of being affixed on the equipment. Sincerely, S ignature: ____________________ Printed Name /Title: Uei- Ming Jow /CEO Company Name: DOTSPACE INC.

PACKAGING LABEL Packaging

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2305000286E5 Page: 1 of 7 RF EXPOSURE REPORT FCC Applicant: DOTSPACE INC. 1209 Orange Street, Wilmington, DE 19801, United States Product Name: PressureDOT GI Monitoring System Brand Name: PressureDOT Model No.: PDT-001_Capsule Model Difference: N/A Report Number: TESA2305000286E5 FCC ID 2BBOEPRESSUREDOT001 Issue Date: Jul. 13, 2023 Date of EUT Received: May. 12, 2023 Approved By John Yeh We hereby certify that: The above equipment was evaluate by SGS Taiwan Ltd. The evaluation in this report is in compliance with FCC Rule Part §2.1093. The results of this report relate only to the sample identified in this report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted…

Text truncated - open the document above for the full version.