2BBOJBL-082ATOMISER CONNECT

Overview Main body 14 13 12 Setting Instructions • Keep on a stable and at surface. Carpet, cushions or other uneven surfaces might aect the ventilation system. • Do not use a 1A power adapter as the input power might not be enough to charge the diuser. • The diusion head tube can be cut if too long for the essential oil bottle. Ensure to remove tube from the diusion head and cut the at end from the top as the bottom part is slanted for better oil absorption. On/O, Timer & Light • Press the rst button once to turn on. Default setting is 30mins (30M indicator) diusion from pod 1 (For pod 2 is remaining OFF.) • “S” standard mode will automatically be selected when unit is turned on. (On 13s / 47s) • Press the button a second time to turn o pod 1. • Press the button a third time to turn on pod 1 with “S” Standard mode. • Press once to switch to “B” boost mode. (On 4mins / 6mins) • Press the button a second time & run time is 1 hour (1H indicator). • Press the button a third time & run time is 3 hours (3H indicator). • Press the button a fourth time to switch the diuser o. • Hold the button for 3 seconds to turn o the light. Hold for another 3 seconds to turn light back on. Mist Output Battery • Charging (red indicator light) • Full Battery (green indicator light) • Low Battery (ashing indicator light) Operation Instructions 1. Take o the metal cover and remove the paper card. Pull up the diusion head. Hold the bottle and rotate the diusion head anti-clockwise to remove. 2. Insert the essential oil bottle opener between your Aromatherapy Associates essential oil bottle neck and plastic dropper and press to pop the dropper o. 3. Insert the diusion head directly onto your Aromatherapy Associates pure essential oil blend. Hold the bottle & rotate the diusion head clockwise to secure. 5. Insert the charging cable into a 2A power adapter socket or a 2A USB port to charge. Once it is fully charged, the cable can be removed. Note: • Always unplug the product from the electrical socket when not in use. • Do not remove the diusion head or move the device whilst actively diusing. 6. Press the On/O button to start the device & select the time duration. Press the second button to control pod 1 & press the third button to control pod 2. 4. Insert the diusion head & bottle into your chosen pod, ensuring diusion head air inlet is lined up with the symbol and grooves. Place the metal cover back on top. • For best results & to be eligible for warranty, use only with Aromatherapy Associates Pure Essential Oil Blends. Articial fragrance or impurities may harm the unit. 2 1 1 2 3 11 4 5 10 6 7 8 9 Diusion Hole Metal Cover Diusion Head Essential Oil Bottle LED Light Ceramic Body On/O Button, Timer & Light Pod 1 Mist Control Pod 2 Mist Control Charging Port Mode Indicators Battery Indicator Diusion Head Top Cover Air Inlet Essential Oil Tube Charging Cable Essential Oil Bottle Opener 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Cleaning & Maintenance 2. Insert into the Atomiser Connect and turn on to diuse for 5 minutes on standard mode. 3. Rotate the nozzle cap anti-clockwise and take out the inner cap. Dip a cotton swab in the rubbing alcohol and use it to gently wipe inside the nozzle. 1. Fill an empty Aromatherapy Associates pure essential oil bottle or the original bottle provided with rubbing alcohol under 75% concentration. Note: • Never use with rubbing alcohol over 75% concentration as it may damage your Atomiser Connect. • Alcohol is ammable. Ensure room is well-ventilated to prevent the risk of re. • For best results, clean the diusion head 1-2 times per week. • Use a dierent diusion head for each pure essential oil blend. Two are provided with the machine and are available to be purchased individually. If the same diusion head is to be used for dierent essential oil blends, we recommend cleaning the diusion head and changing the oil tube before switching. • Use only with pure natural essential oil blends to prevent damaging the unit components. • This product contains battery,make sure to use the device within 0°C - 40°C, otherwish it might aect the battery life and safety. • Dierent pure essential oil blends will diuse at dierent rates due to the molecular make-up of the essential oils. For example, blends that contain more viscous oils such as Sandalwood will diuse at a slightly slower rate. Remove the diusion head and reinstall correctly. Make sure the diusion air inlet is aligned to the button. Change to a new essential oil bottle, add more essential oil into the bottle or change the pipe. Product Size: Ø130mm(D) x 135mm(H) Product Warranty Thank you for your purchase. This product carries a limited 12-month warranty from proof of purchase on manufacturer defects. Please contact Aromatherapy Associates Customer Services on [email protected] or call +44 (0)2085697030 for enquiries or product maintenance: Proof of purchase will be required. Warranty does NOT apply for: • Damage of accessories due to extended use/depreciation over time. • Damage due to abuse or improper use of the product. • Damage of non-household use. (i.e. commercial use, natural disaster such as ood) • Failure to provide proof of product damage and purchase. We reserve the right to take a nal decision of free product maintenance provided within mentioning period and any other conditions. Product Name:The Atomiser Connect Model code:BL-082 Material: Ceramic + Metal + PP Power: 3.6V 5200mAh 18.72Wh, Manufacturer: Bloomy Lotus LLC Main unit weight: 1100g Coverage Area: Up to 120m Environment:Indoor Run Time:30mins /1H/3H Design: USA Made in China Product Dimensions When this product remains unused for a long period of time, the main unit must be unplugged from the USB, electrical socket and the oil bottle. Otherwise electric shock malfunction may occur. • This product must be disconnected from the power sources before cleaning and maintenance. • Please avoid dr…

Text truncated - open the document above for the full version.

Bl�omy Lotus Ltd. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request「egardingapplication for FCC ID: 2BBO』BL-082 LONG TERM CONFIDENTIALITY Pursuant to 4 7 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within confidential period, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Matt Xiong Signature丸对加7 On behalf of Company: Bloomy Lotus Ltd. Telephone: +86 13164613324 E-mail: [email protected] T仆le:Electronics engineer

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 External Photos for SZCR2306001772HS FCC ID: 2BBOJBL-082 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 6 Internal Photos for SZCR2306001772HS FCC ID: 2BBOJBL-082 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 6 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 6 BT ANT SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 6 of 6 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600177204 Page: 1 of 12 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2306001772HS Applicant: Bloomy Lotus Ltd. Address of Applicant: A5, 11/F., NCB Innovation Centre, 888 Lai Chi Kok Road, Kowloon, Hong Kong Manufacturer: Bloomy Lotus Ltd. Address of Manufacturer: A5, 11/F., NCB Innovation Centre, 888 Lai Chi Kok Road, Kowloon, Hong Kong Factory: Bloomy Lotus Ltd. Address of Factory: A5, 11/F., NCB Innovation Centre, 888 Lai Chi Kok Road, Kowloon, Hong Kong Equipment Under Test (EUT): EUT Name: ATOMISER CONNECT Model No.: BL-082 Trade Mark: FCC ID: 2BBOJBL-082 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-06-07 Date of Test: 2023-06-08 to 2023-06-19 Date of Issue: 2023-06-20 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600177204 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2023-06-20 Original Authorized for issue by: Winkey Wang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600177204 Page: 3 of 12 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Separation Distance ........................................................................................................................... 5 3.3 Test Location ...................................................................................................................................... 6 3.4 Test Facility ........................................................................................................................................ 6 3.5 Deviation from Standards ................................................................................................................... 6 3.6 Abnormalities from Standard Conditions ........................................................................................... 6 4 FCC Radiofrequency radiation exposure limits .................................................................................... 7 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 7 4.2 MPE-based Exemption ...................................................................................................................... 7 4.3 SAR-based Exemption ....................................................................................................................... 8 5 Measurement and Calculation ............................................................................................................... 11 5.1 Maximum transmit power ................................................................................................................. 11 5.2 RF Exposure Calculation ................................................................................................................. 12 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600177204 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Power supply: Input 5V, 2A via type-C port rechargeable battery inside: 3.6Vdc, 5200mAh Cable(s): USB Cable: 1.8m, unshielded For BT: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 Dual mode Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: PCB Antenna Antenna Gain: -7.99dBi For BLE: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 Dual mode Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: -7.99dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600177204 Page: 5 of 12 3.2 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600177204 Page: 6 of 12 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 All tests were performed at: 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Sh…

Text truncated - open the document above for the full version.

Antennatestreport 1 、 AntennaPhoto&Length(mm) 2 、 Antennagainandefficiency ZHUHAI JIELI TECHNOLOGY CO.,LTD No.333 Kexing Road, Xiangzhou District, Zhuhai, Guangdong 3、 AntennaRadiationPattern ZHUHAI JIELI TECHNOLOGY CO.,LTD No.333 Kexing Road, Xiangzhou District, Zhuhai, Guangdong

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600177202 Page: 1 of 97 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2306001772HS Applicant: Bloomy Lotus Ltd. Address of Applicant: A5, 11/F., NCB Innovation Centre, 888 Lai Chi Kok Road, Kowloon, Hong Kong Manufacturer: Bloomy Lotus Ltd. Address of Manufacturer: A5, 11/F., NCB Innovation Centre, 888 Lai Chi Kok Road, Kowloon, Hong Kong Factory: Bloomy Lotus Ltd. Address of Factory: A5, 11/F., NCB Innovation Centre, 888 Lai Chi Kok Road, Kowloon, Hong Kong Equipment Under Test (EUT): EUT Name: ATOMISER CONNECT Model No.: BL-082 Trade Mark: FCC ID: 2BBOJBL-082 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-06-07 Date of Test: 2023-06-08 to 2023-06-19 Date of Issue: 2023-06-20 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600177202 Page: 2 of 97 Revision Record Version Chapter Date Modifier Remark 01 2023-06-20 Original Authorized for issue by: Winkey Wang/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600177202 Page: 3 of 97 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600177202 Page: 4 of 97 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 7 4.4 Test Location ...................................................................................................................................... 8 4.5 Test Facility ........................................................................................................................................ 8 4.6 Deviation from Standards ................................................................................................................... 8 4.7 Abnormalities from Standard Conditions ........................................................................................... 8 5 Equipment List .......................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ............................................................................................. 13 6.1 Antenna Requirement ...................................................................................................................... 13 6.1.1 Test Requirement: ....................................................................................................................... 13 6.1.2 Conclusion ................................................................................................................................... 13 6.2 Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence................ 14 6.2.1 Test Requirement: ....................................................................................................................... 14 6.2.2 Conclusion ................................................................................................................................... 14 7 Radio Spectrum Matter…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 3 Setup Photos for SZCR2306001772HS FCC ID: 2BBOJBL-082 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 3 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Emissions which fall in the restricted bands SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 3 of 3 Radiated Spurious Emissions Below 1GHz Radiated Spurious Emissions Above 1GHz - End of the Appendix -