2BBONYW160Window Cleaning Robot

Window Cleaning RobotUser Manual Thank you for purchasing this product, please read the instructions carefully before use. Content 

Important Safety Instructions and Warnings






  

Product Description & Parameters





 

Steps for Usage

 

Function of Cleaning



 

UPS Power Failure Protection System







Troubleshooting




 ˋ

ˋ  Important Safety Instructions and Warnings 1.Attention! Must read before use 2.Warnings 1. Do not allow children to operate this product. Users with phy sical, sensory or psychological disorders, or those who lack knowledge of the functions and operation of t his product must be supervised by a fully competent user after being familiar with the use procedures and safety risks. Users must use the product under the supervision of a fully capable user after familiarizi ng themselves with the use process and safety risks. Children are not allowed to use.This product should not be used by children as a toy. 2. This product can only be used to clean framed windows and gla ss (not suitable for frameless windows and glass). If the glass cement of the glass frame is damaged, in c ase the product pressure is insufficient and fall down, please pay special attention to this product during clean ing process. User must observe the using scenario to ensure that the product is used safely and securely . Please use the original adapter! (Using a non-original adapter may cause product failure or caus e damage to the product) • Make sure the adapter has enough space for ventilation and hea t dissipation during use. Do not wrap up the power adapter with other objects. • Do not use the adapter in a humid environment. Do not touch th e power adapter with wet hands during use. There is an indication of the voltage used on the a dapter nameplate • Do not use a damaged power adapter, charging cable or power pl ug. Before cleaning and maintaining the product, the power plug must be unplugged and do not discon nect the power by disconnecting the extension cable to prevent electric shock. • Do not disassemble the power adapter. If the power adapter is malfunctioning, please replace the entire power adapter. For assistance and repairing, contact you r local customer service or distributor. • Please do not disassemble the battery. Do not dispose the batt ery in a fire. Do not use in a high temperature environment above 60 . If the battery of this product has not been handled properly, there is a risk of burning or causing chemical damage to the body. • Please hand over the used batteries to the local professional battery and electronic product recycling center for recycling. • Please strictly follow this manual to use this product. • Please keep this manual for future use. • Do not immerse this product in liquids (such as beer, water, d rinks, etc.) or leave it in a humid environment for a long time. • Please keep it in a cool dry place and avoid direct sunlight. Keep this product away from heat sources (such as radiators, heaters, microwave ovens, gas stoves, etc.) . • Do not place this product in a strong magnetic scene. • Please store this product out of reach of children. • Please use this product in 0 ~40 (32 ~104 ) ambient temperature. • Do not clean damaged glass and objects with uneven surface. On uneven surfaces or damaged glass, the product will not be able to generate sufficient vacuum adso rption. • The built-in battery of this product can only be replaced by t he manufacturer or designated dealer / after-sales center to avoid danger. • Before removing the battery or dispose of the battery, the pow er must be disconnected. • Please operate this product in strict accordance with the inst ructions, if any property damage and personal injury caused by improper use, the manufacturer is not responsible for it. ˋ

ˋ 
Before use, please make sure that the safety rope is not broken and one end is firmly connected to the product and the other end is firmly connected to other f ixed indoor furniture to prevent the product from falling down and causing damage to people or other objects. 2. If the glass cement in the middle section of the window is d amaged or chipped at the corners due to aging, please be careful to use the product and make sur e someone can offer help during the working period, to prevent the machine from falling down an d causing damage to people or objects. Attention 1. Before operation, make sure the safety rope is not broken an d tie it securely to a fixed indoor furniture. 2. Before using the product, make sure there the safety rope is not damaged and the knot is secured. 3. When cleaning the glass of the window or door without protec tive fence, please set up a safety warning area downstairs. 4. Fully charge the built-in backup battery before use (blue li ght is on). 5. Do not use in rainy or humid weather. 6. Turn on the machine first and then attach it to the glass.7. Make sure the machine is firmly attached to the glass before letting go of your hands. 8. Before turning off the machine, please hold the machine to a void dropping. 9. Do not use this product to clean frameless windows or glass.10.Make sure the cleaning pad is properly attached to the botto m of the machine to prevent air pressure leakage during adsorption.11.Do not spray water towards the product or the bottom of the product. Only spray water towards the cleaning pad.12.Children are not allowed to use the machine.13.Remove all items from the glass surface before use. Never us e the machine to clean broken glass. The surface of some frosted glass may be scratched during cleaning. Please use with caution. 14.Please keep hair, loose clothing, fingers and other parts of body away from the working product. 15.Do not use in those areas with flammable and explosive solid s and gases. Make sure the power is completely disconnected and the machine is turned …

Text truncated - open the document above for the full version.

ShenzhenONEJTechnologyCo.,Ltd. B309,HuijuXinqiao107,ChuangzhiPark,XinqiaoStreet,BaoanDistrict,Shenzhen,China Date:2023-12-01 FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2BBONYW160 FRN:0033893280 ShenzhenONEJTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingofthe application,ABNSYSTEMSINTERNATIONALLLCisourdesignatedU.S.agentforservice ofprocessfortheabovereferencedFCCID.ShenzhenONEJTechnologyCo.,Ltd.,accepts tomaintainanagentfornolessthanoneyearafterthegranteehasterminatedallmarketing andimportationortheconclusionofanyCommission-relatedproceedinginvolvingthe equipment. ABNSYSTEMSINTERNATIONALLLCaccepts,asofthedateofthefilingoftheapplication, theobligationofthedesignatedU.S.agentforserviceofprocessfortheabovereferenced FCCID. DesignatedU.S.AgentInformation: Name:ABNSYSTEMSINTERNATIONALLLC Address:2220WESTCREEKLNAPT520Houston,TX77027-3608UnitedStates FRN：0033555418 ContactPerson:DanielTrinca Tel.:+1281702-9212 Email:[email protected] Sincerely, SignedonbehalfofShenzhenONEJ TechnologyCo.,Ltd. SignedonbehalfofABNSYSTEMS INTERNATIONALLLC Name:HuiJingChenName:DanielTrinca Title:SalesrepresentativeTitle:OwnerABNLLC Date:2023-12-01Date:2023-12-01

ShenzhenONEJTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2023-12-01 FCCID:2BBONYW160 Ref.#1:AttestationStatementsPart2.911(d)(5)(i)Filing ShenzhenONEJTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorization pursuanttosection2.903oftheFCCrules. Ref.#2:AttestationStatementsPart2.911(d)(5)(ii)Filing ShenzhenONEJTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Applicant:ShenzhenONEJTechnologyCo.,Ltd. Address:B309,HuijuXinqiao107,ChuangzhiPark,XinqiaoStreet,BaoanDistrict,Shenzhen, China ContactPerson:HuiJingChen Tel.:13660347052 Email:[email protected] Sincerely, Signature:

SHANGHAI DEMAN INFORMATION TECHNOLOGY CO.,LTD. MANUFACTURE NAME: Shenzhen Tuya technology Co., LTD ADDRESS: Ren Feng P/N: Page 1 Ren Feng P/N: WRITED: PCB ANTENNA DATE:20190520 VERSIONS:A Comprehensive Building 301, No. 8 Guixiang Community Plaza Road, Guanlan Street, Longhua District, Shenzhen Measurement data Page 2 Frequency (MHz) 240024502500 Return Loss-8.73-11.76-11.21 VSWR 2.161.711.77 Radiation pattern Z Y Page 3 X Directivity Diagram Z Y X XY XZ Page 4 YZ Freq.（MHz）Effi(%)Gain (dBi) 2400 52.29 1.62 2410 52.17 1.71 2420 53.14 1.93 2430 54.16 1.98 Efficiency&Gain Page 5 2440 57.62 2.00 2450 59.64 2.17 2460 61.55 2.45 2470 60.64 2.38 2480 62.86 2.54 2490 59.85 2.30 2500 60.41 2.49

ShenzhenONEJTechnologyCo., Ltd. Date：2023-11-28 ProductMode l Number:WindowCleaningRobot FCC ID：2BBONYW160 To whomit may concern, Re:ProductCertificationRepresentativeAuthorizationLetter We authorizeQAI LaboratoriesLtd. 3980 North FraserWay, BurnabyB.C. CanadaV5J 5K5 to act on our behalfon all mattersconcerningthe above namedequipment. This shall includethe following: Testing Approvalapplicationsand procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Title: Sales representative Email:[email protected] Telephone: 13660347052 On behalfof: ShenzhenONEJTechnologyCo., Ltd.

ShenzhenONEJTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:November28,2023 Subject;RequestforConfidentiality FCCID:2BBONYW160 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:HuiJingChen Title:Salesrepresentative

ShenzhenONEJTechnologyCo.,Ltd. ModelDifference Productdescription:WindowCleaningRobot Modelname:YW160,YW130,YW131,YW132,YW133,YW134,YW135,YW136, YW137,YW138,YW139,YW161,YW162,YW163,YW164,YW165,YW166,YW167, YW168,YW169 FCCID：2BBONYW160 AllthemodelareofthesamecircuitandRFmodule,andtheonlydifferenceisthe modelname.ThemodelYW160isthetestedsample. Regards Sincerely Client’ssignature: Client’sname/title:HuiJingChen/Salesrepresentative Contactinformation/address:B309,HuijuXinqiao107,ChuangzhiPark,XinqiaoStreet, BaoanDistrict,Shenzhen,ChinaChina

FCC ID: 2BBONYW160 Page1 of 1 EUT PHOTOS External Photos FCC ID: 2BBONYW160 Page2 of 2 FCC ID: 2BBONYW160 Page3 of 3 FCC ID: 2BBONYW160 Page4 of 4 FCC ID: 2BBONYW160 Page5 of 5 ĆĆĆĆĆĆ END OF REPORT ĆĆĆĆĆ

FCCID:2BBONYW160

FCC ID: 2BBONYW160 Page1 of 1 EUT PHOTOS Internal Photos FCC ID: 2BBONYW160 Page2 of 2 FCC ID: 2BBONYW160 Page3 of 3 FCC ID: 2BBONYW160 Page4 of 4 FCC ID: 2BBONYW160 Page5 of 5 Ć ĆĆĆĆĆ END OF REPORT ĆĆĆĆĆ Ant

FCCID:2BBONYW160 RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1091， UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone 1-gheadorbodyand10-gextremitySARevaluationforgeneralpopulationexposure conditions,bymeasurementornumericalsimulation,isnotrequiredwhenthe correspondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactof humanexposuretoradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequency range (MHz) Electricfield strength (V/m) Magneticfield strength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthe totalpowerinputtotheantenna,throughthecalculation,wewillknowthedistancerwhere theMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middle andhighestchannelindividually. TestResultofRFExposureEvaluation Mode Max.Output powerto antenna (dBm) Max.Output powerto antenna (mW) Max.Power Densityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result BLE5.213.3190.001191.0 PASS 2.4GWIFI19.1582.220.029361.0PASS Remark:Antennagain=2.54dBi Conclusion:NoRFExposureEvaluation/SARtestisrequired. --THEEND--

Project No.: ZHT-231113037E Page 1 of 48 FCC TEST REPORT FCC ID:2BBONYW160 Report Number. .............................. : ZHT-231113037E Date of Test ...................................... : Nov. 13, 2023 to Nov. 24, 2023 Date of issue .................................... : Nov. 24, 2023 Test Result ..................................... : PA SS Testing Laboratory. ........................ : Guangdong Zhonghan Testing Technology Co., Ltd. Address .......................................... : Room 104, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Applicant's name ......................... : Shenzhen ONEJ Technology Co., Ltd. Address ........................................... B309, Huiju Xinqiao 107, Chuangzhi Park, Xinqiao Street, Baoan District, Shenzhen, China Manufacturer's name ................... : Shenzhen ONEJ Technology Co., Ltd. Address .......................................... : B309, Huiju Xinqiao 107, Chuangzhi Park, Xinqiao Street, Baoan District, Shenzhen, China Test specification: Standard ........................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Test procedure ................................. : KDB558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2013 Non-standard test method ............. : N/A This device described above has been tested by ZHT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZHT, this document may be altered or revised by ZHT, personal only, and shall be noted in the revision of the document. Product name ................................. : Window Cleaning Robot Trademark ...................................... : / Model/Type reference ...................... : YW160, YW130, YW131, YW132, YW133, YW134, YW135, YW136, YW137, YW138, YW139, YW161, YW162, YW163, YW164, YW165, YW166, YW167, YW168, YW169 Model Difference Only model name is different. Ratings ............................................. : Adapter 1: Model: RY72A240300M2 Input: 100- 240V~50/60Hz 2.0A Output ：24.0V, 3.0A Adapter 2: Model: BZ065-240300-E2 Input: 100-240v~ 50/60Hz 1.5A Output: 24V,3.0A Project No.: ZHT-231113037E Page 2 of 48 Testing procedure and testing location: Testing Laboratory ................................... : Guangdong Zhonghan Testing Technology Co., Ltd. Address ...................................................... : Room 104, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Leon Li Tested by (name + signature) .................... : Baret Wu Reviewer (name + signature) ..................... : Levi Lee Approved (name + signature) .................... : Project No.: ZHT-231113037E Page 3 of 48 Table of Contents Page 1. VERSION ................................................................................................................................................. 5 2. SUMMARY OF TEST RESULT S ............................................................................................................. 6 2.1 TEST FACILITY ............................................................................................................................... 7 2.2 MEASUREMENT UNCERTAINTY .................................................................................................. 7 3. GENERAL INFORMATION ..................................................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................... 8 3.2 DESCRIPTION OF TEST MODES .................................................................................................. 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED ........................... 10 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) ..................................................... 10 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS................................................................................ 11 4. EMC EMISSION TEST .......................................................................................................................... 13 4.1 CONDUCTED EMISSION MEASUREMENT ................................................................................ 13 4.1.1 POWER LINE CONDUCTED EMISSION Limits ................................................................. 13 4.1.2 TEST PROCEDURE ............................................................................................................. 13 4.1.3 DEVIATION FROM TEST STANDARD ................................................................................ 13 4.1.4 TEST SETUP ........................................................................................................................ 14 4.1.5 EUT OPERATING CONDITIONS ......................................................................................... 14 4.1.6 TEST RESULTS ................................................................................................................... 14 4.2 RADIATED EMISSION MEASUREMENT ..................................................................................... 19 4.2.1 RADIATED EMISSION LIMITS ............................................................................................ 19 4.2.2 TEST PROCEDURE ............................................................................................................. 20 4.2.3 DEVIATION FROM TEST STANDARD ................................................................................ 20 4.2.4 TEST SETUP ........................................................................................................................ 20 4.2.5 EUT OPERATING CONDITIONS .....................…

Text truncated - open the document above for the full version.

Project No.: ZHT-231113037E-1 Page 1 of 92 FCC TEST REPORT FCC ID:2BBONYW160 Report Number. .............................. : ZHT-231113037E-1 Date of Test ...................................... : Nov. 13, 2023 to Nov. 24, 2023 Date of issue .................................... : Nov. 24, 2023 Test Result ....................................... : PASS Testing Laboratory. ........................ : Guangdong Zhonghan Testing Technology Co., Ltd. Address .......................................... : Room 104, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Applicant's name ......................... : Shenzhen ONEJ Technology Co., Ltd. Address ........................................... : B309, Huiju Xinqiao 107, Chuangzhi Park, Xinqiao Street, Baoan District, Shenzhen, China Manufacturer's name ................... : Shenzhen ONEJ Technology Co., Ltd. Address .......................................... : B309, Huiju Xinqiao 107, Chuangzhi Park, Xinqiao Street, Baoan District, Shenzhen, China Test specification: Standard .......................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Test procedure ................................. : KDB558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2013 Non-standard test method ............. : N/A This devicedescribed above has been tested by ZHT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZHT, this document may be altered or revised by ZHT, personal only, and shall be noted in the revision of the document. Product name ................................. : Window Cleaning Robot Trademark ...................................... : / Model/Type reference ...................... : YW160, YW130, YW131, YW132, YW133, YW134, YW135, YW136, YW137, YW138, YW139, YW161, YW162, YW163, YW164, YW165, YW166, YW167, YW168, YW169 Model Difference Only model name is different. Ratings ............................................. : Adapter 1: Model: RY72A240300M2 Input: 100- 240V~50/60Hz 2.0A Output：24.0V, 3.0A Adapter 2: Model: BZ065-240300-E2 Input: 100-240v~ 50/60Hz 1.5A Output: 24V,3.0A Project No.: ZHT-231113037E-1 Page 2 of 92 Testing procedure and testing location: Testing Laboratory ................................... : Guangdong Zhonghan Testing Technology Co., Ltd. Address ...................................................... : Room 104, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Leon Li Tested by (name + signature) .................... : Baret Wu Reviewer (name + signature) ..................... : Levi Lee Approved (name + signature) .................... : Project No.: ZHT-231113037E-1 Page 3 of 92 Table of Contents Page 1. VERSION .................................................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................................................... 6 2.1 TEST FACILITY .................................................................................................................................. 7 2.2 MEASUREMENT UNCERTAINTY ..................................................................................................... 7 3. GENERAL INFORMATION ........................................................................................................................ 8 3.1 GENERAL DESCRIPTION OF EUT .................................................................................................. 8 3.2 DESCRIPTION OF TEST MODES ..................................................................................................... 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED .............................. 10 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) ....................................................... 10 3.5EQUIPMENTS LIST FOR ALL TEST ITEMS ................................................................................... 11 4. EMC EMISSION TEST ............................................................................................................................. 13 4.1 CONDUCTED EMISSION MEASUREMENT ................................................................................... 13 4.1.1 POWER LINE CONDUCTED EMISSION Limits ................................................................... 13 4.1.2 TEST PROCEDURE ................................................................................................................ 13 4.1.3 DEVIATION FROM TEST STANDARD .................................................................................. 13 4.1.4 TEST SETUP ........................................................................................................................... 14 4.1.5 EUT OPERATING CONDITIONS ............................................................................................ 14 4.2 RADIATED EMISSION MEASUREMENT ....................................................................................... 19 4.2.1 RADIATED EMISSION LIMITS ............................................................................................... 19 4.2.2 TEST PROCEDURE ................................................................................................................ 19 4.2.3 DEVIATION FROM TEST STANDARD .................................................................................. 20 4.2.4 TEST SETUP ........................................................................................................................... 20 4.2.5 EUT OPERATING CONDITIONS ............................................................................................…

Text truncated - open the document above for the full version.