2BBPASLBWC120SLBS Edge Wireless Charger

Product SpecificationPrecautions for Device Charging How to Use the Product ❶ Connect the product to a power source. ❷ Place your mobile phone on top of the product. ・ Main Unit for Wireless Charger ・ USB Type-C Cable (1M) ・ User Guide Components ・Please read the user guide before using the product to ensure safe and correct usage. ・The images in the user manual may differ from the actual product, and the content may be subject to changes without prior notice for performance improvements. ・To use the product with other mobile devices, please ensure compatibility between the mobile device and the product. ・Note that wireless charging may be difficult with certain mobile phone accessory cases, depending on the case design. ・The USB Type-C charging adapter is not included and needs to be purchased separately. ・Fast charging at 15W is possible when using a charging adapter with a minimum power output of 25W. ・It is recommended to use the Samsung 25W genuine charging adapter. Using a non-Samsung genuine charging adapter may result in normal charging not being possible. ・The components provided may not be compatible with other devices. ・The provided components and available accessories may be subject to change depending on our circumstances. ・During charging, make sure the charger is near an electrical outlet and placed within easy reach. Please place the product and the device as shown in Images 1, 2, and 3, ensuring they are aligned at the center. If the device is placed incompletely as shown in Image 4, the charging efficiency may be reduced. When using the product, make sure the back of the device is in contact with the wireless charging area. Dropping the device onto the product may cause damage to the product. In such cases, it will be considered consumer negligence. Please use it with caution. Wireless Charging Compatible Models Please find the list of models that support 15W wireless charging. ・ Supports 15W Fast Charging S23 Ultra, S23, S23, Galaxy Z Fold4, Z Flip4, S22 Ultra, S22, S22, S21 Ultra 5G, S215G, S21 5G, Note20 Ultra 5G, S20 Ultra 5G, S205G, S20 5G, Note10 ・ Supports Standard Fast Charging The product is compatible with a wide range of Galaxy smartphones that support wireless charging, as well as other devices such as the iPhone 14 ProMax, 14 Pro, 14, 14, 13 Pro Max, 13 Pro, 13, 13 mini, 12 Pro Max, 12 Pro, 12, 12 mini, 11 Pro Max, 11 Pro, 11, X, XS, XS Max, XR, 8, and 8 Plus. Instructions Product SLBS Edge Wireless Charger Product Name LED Status Indicator Check the charging status of the product through the color of the LED status indicator. Red Green Off LED Indicator Color Red, green, orange blinking in sequence Charging Complete Red blinkingCharging error Error due to non-genuine charger usage Mobile device disconnected / Power off Orange blinking Status Power connected Charging in progress July 2023 Contact SLBS at: 82 7088083619 6 months Release Month of the Same Model Manufacturer Made In Output Power Input Power Repair Service Warranty Period SLBWC120Model 5W / 9W / 15W 9V 2.77A (Using a genuine charger of 25W or higher is recommended.) RECYLCLED PC, RUBBER Wireless Charger, USB Type-C Cable, User Guide Product Material Components Product Dimensions (Width * Height * Depth) 100  100  16.3 (mm) Specifications 86g Product Weight R-R-Sxs-SLBWC120  Image 4   Image 2  Image 1   Image 3  Wireless Charging Area Charging Port 1. Cases of malfunction due to consumer negligence Malfunction caused by careless use (submersion, breakage, damage) Malfunction caused by failure to follow the "Caution" instructions in the user guide 2. Other cases Malfunction caused by natural disasters (fire, corrosion, water damage, lightning, etc.) ※ Service may be refused in the following cases: Modification, tampering, duplication, or use of unauthorized or counterfeit parts If there is a replacement of parts with different components from those that were originally installed at the time of purchase or during previous repairs. Please be aware that if the issue with the product is not a defect but rather a result of consumer negligence, requesting service may incur charges regardless of the warranty period. It is advisable to consult the user guide first for troubleshooting steps and potential solutions. Precautions for Connection ・The product needs to be connected to a charger or PC in order to use it. ・Take care to prevent foreign substances (liquids, dust, etc.) from entering the power connector. This may cause the product to malfunction. ・Do not move the mobile device while it is connected to the product. This may restrict smooth charging. ・ If the LED status indicator is not functioning properly or is not recognized correctly, disconnect the charger and reconnect it. ・ The LED status indicator may appear differently depending on the mobile device. Paid Service Repair Inquiry ・When inquiring about repair, please provide the product model name, details of the malfunction, and your contact information. ・If a malfunction occurs with the product, please contact SLBS Customer Service Center at 82 7088083619. ・The warranty period for the product is within 6 months from the date of purchase. In case of a defect caused by product failure, we will exchange the product after it is collected and inspected. ・When returning the product, please use the designated courier service. Additional charges may apply if an unspecified courier service is used. Additional costs may apply for remote or mountainous areas. ・In case of product retrieval/return due to consumer negligence, courier fees will be charged. Safety Precautions ※ Please read carefully and strictly follow these instructions before use. Malfunction caused by consumer's intentional negligence In the event that a partial repair is not possible for the product, the consumer has the option to purchase a new product at the selling price. This option is available within the inventory holding period of 6 months from the time of the…

Text truncated - open the document above for the full version.

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. SLASH B SLASH Co., LTD. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA RE GARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 T his letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U .S. Agent Signature: D ate: July 13, 2023 Si gned by (Printed Name/Title): Nathan Grinager / Co-President *This letter is valid indefinitely for all applications submitted within the period of 07/13/2023 – 07/12/2024 The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. A pplicant Company name: SLASH B SLASH Co., LTD. FCC ID: 2BBPASLBWC120 Contact Name: LUKE WON Street Address: 4F, 63-1, Geumjeong-ro, Geumjeong-gu, Busan, Republic of Korea City/Province/Zip: BUSAN Telephone No: +821025471750 Email:[email protected] A pplicant Signature: D ate: 12-07-2023 Si gned by (Printed Name/Title): LUKE WON / Director

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-10-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BBPASLBWC120 SLASH B SLASH CO., LTD. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Director LUKE WON Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10-07-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BBPASLBWC120 SLASH B SLASH CO., LTD. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Director LUKE WON

SLASH B SLASH Co., LTD. 4F, 63-1, Geumjeong-ro, Geumjeong-gu, Busan, Republic of Korea Date: Jul. 12, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Timco Engineering Inc. 849 N.W. State Road 45 PO Box 370 Newberry, FL 32669 To whom it may concern: I, the undersigned, hereby authorize Mr. Sung-Ryul Kim / Senior Researcher of Korea Testing Certification. and hereafter referred to as Korea Testing Certification to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Sung-Ryul Kim / Senior Researcher of Korea Testing Certification. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Korea Testing Certification as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, LUKE WON / Director

PERMANENT Exhibit Type File Name Part List Schematics Block diagram Operation description And the above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Part list.pdf Schematics.pdf Block diagram.pdf Operation description.pdf 4F, 63-1,Geumjeong-ro,Geumjeong-gu,Busan,Republicof Korea Date:Jul12,2023 FederalCommunications Commission Authorization and Evaluation Division ConfidentialityRequest regarding application for certification ofFCC ID: 2BBPASLBWC120 Pursuant toSections0.457and0.459oftheCommission’sRules, weherebyrequest confidential treatment ofinformation accompanying this application asoutlined below: LUKEWON/ Director PCBLayout PCBLayout.pdf SLASHB SLASHCo., LTD.

FCC ID: 2BBPASLBWC120, IC: 30792-SLBWC120 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 4 EXTERNAL PHOTOGRAPHS FCC ID: 2BBPASLBWC120, IC: 30792-SLBWC120 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 4 ■ EXTERNAL PHOTO FCC ID: 2BBPASLBWC120, IC: 30792-SLBWC120 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 4 FCC ID: 2BBPASLBWC120, IC: 30792-SLBWC120 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 4

Label Location & Label

FCC ID: 2BBPASLBWC120, IC: 30792-SLBWC120 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 5 INTERNAL PHOTOGRAPHS FCC ID: 2BBPASLBWC120, IC: 30792-SLBWC120 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 5 ■ INTERNAL PHOTO FCC ID: 2BBPASLBWC120, IC: 30792-SLBWC120 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 5 FCC ID: 2BBPASLBWC120, IC: 30792-SLBWC120 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 5 FCC ID: 2BBPASLBWC120, IC: 30792-SLBWC120 HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ５ of 5

HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 F ax. +82 31 645 6401 On your side TEST REPORT FCC WPT Test for SLBWC120 Certification APPLICANT SLASH B SLASH Co., LTD. REPORT NO. HCT-SR-2307-FC001 DATE OF ISSUE July 07, 2023 Tested by Jung Hun Park (signature) Technical Manager Yun Jeang Heo (signature) F-TP22-03 (Rev. 04) Page 1 of 16 The report shall not be reproduced except in full(only partly) without approval of the laboratory. F-TP22-03 (Rev. 04) Page 2 of 16 HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 TE S T R E P O R T F C C WP T T e s t f o r S L B WC 1 2 0 REPORT NO. HCT-SR-2307-FC001 DATE OF ISSUE July 07, 2023 Additional Model - Applicant SLASH B SLASH Co., LTD. 4F, 63-1, Geumjeong-ro, Geumjeong-gu, Busan, Republic of Korea EUT Type Model Name SLBS Edge Wireless Charger SLBWC120 FCC ID 2BBPASLBWC120 Frequency of Operation 127 kHz(Wireless Charger) FCC Classification Wireless Power Charger FCC Rule Part(s) FCC Part 1 SUBPART I FCC Part 2 SUBPART J KDB 680106 D01 The result shown in this test report refer only to the sample(s) tested unless otherwise stated. This test results were applied only to the test methods required by the standard. Report No. HCT-SR-2307-FC001 F-TP22-03 (Rev. 04) Page 3 of 16 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 July 07, 2023 Initial Release Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules under normal use and maintenance. * The report shall not be reproduced except in full(only partly) without approval of the laboratory. If this report is required to confirmation of authenticity, please contact to www.hct.co.kr Report No. HCT-SR-2307-FC001 F-TP22-03 (Rev. 04) Page 4 of 16 CONTENTS 1. EUT DESCRIPTION 5 2. KDB 680106 D01 v03 SECTION 5.b) EQUIPMENT APPROVAL CONSIDERATIONS 6 3 DESCRUPTION OF TEST SETUP 7 4. TEST AND MEASUREMENT EQUIPMENT 8 5. FCC RULES MAXIMUM PERMISSIBLE RE EXPOSURE 8 6. Measurement RESULTS 10 7 FCC SUMMARY OF RESULTS 10 Annex A. Probe calibration 11 Annex B. Setup Photos. 16 Report No. HCT-SR-2307-FC001 F-TP22-03 (Rev. 04) Page 5 of 16 1. EUT DESCRIPTION Model SLBWC120 EUT Type SLBS Edge Wireless Charger Power Supply (Operating voltage) DC 9.0 [V] Travel Adapter Information (For Testing) PDO(Power Data Objective) - 5V(3A), 9V(2.77A),11V(2.25A) PPS(Programmable Power Supply) - 3.3-5.9V(3.0-3.3A), 3.3-11V(2.25A) Frequency of Operation 127 kHz (Wireless Power Charging) Max. Transmit Power 15W Date(s) of Tests Jun 23, 2023 Report No. HCT-SR-2307-FC001 F-TP22-03 (Rev. 04) Page 6 of 16 2. KDB 680106 D01 v03 SECTION 5.b) EQUIPMENT APPROVAL CONSIDERATIONS Requirement Device (1) Power transfer frequency is less than 1 MHz. Yes. Operation Frequency is 127 kHz. (2) Output power from each primary coil is less than or equal to 15 watts. Yes. Maximum power is 15.0 Watts. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and client that are able to detect and allow coupling only between individual pairs of coils Yes. (4) Client device is placed directly in contact with the transmitter. Yes. (5) Mobile exposure conditions only(portable exposure conditions are not covered by this exclusion). Yes. (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes. The aggregate field at 15 cm from the device are 9.88 % of the FCC H field limit. Report No. HCT-SR-2307-FC001 F-TP22-03 (Rev. 04) Page 7 of 16 3 DESCRUPTION OF TEST SETUP TEST SETUP The following three modes are tested in test configuration; All Position of client device were investigated and the worst position results are reported. MEASUREMENT TEST SETUP The measurement was taken using a probe place 15 cm from the edges of DUT or 20 cm above the DUT. Measurement were from the top and all sides of the DUT per KDB680106 D01 v03. Additionally, as the DUT to phone configuration could result with the DUT place either above or below the phone, measurements were performed ‘below’ the DUT by flipping the DUT/phone so that the DUT was uppermost. The probe was moved along the edges or above the DUT to a position that showed the maximum field strength. This position was used for the reported result. Measurement distance: From all sides and top of the primary client pair to the center of the Probe Side : 15 cm / Top side :20cm Report No. HCT-SR-2307-FC001 F-TP22-03 (Rev. 04) Page 8 of 16 4. TEST AND MEASUREMENT EQUIPMENT The following test and measurement equipment was used for the tests documented in this report : Manufacturer Model name Description S/N Calib. Date Calib.Due Narda ELT-400 Exposure Level Tester N-0538 08/05/2022 08/05/2023 Narda ELT-400 B-Field Probe C-0439 05/02/2023 05/02/2024 5. FCC RULES MAXIMUM PERMISSIBLE RE EXPOSURE 1.13010 The criteria listed in Table 1 shall be used to evaluate the envirimental impact of human exposure to radio-frequency(RF) ragiation as specified in 1.1307(b), except in the case of portable devices which shall ge evaluated according th the provisions of 2.1093 of this chapter. Report No. HCT-SR-2307-FC001 F-TP22-03 (Rev. 04) Page 9 of 16 Report No. HCT-SR-2307-FC001 F-TP22-03 (Rev. 04) Page 10 of 16 6. Measurement RESULTS H-Field Measurements Note : peak m…

Text truncated - open the document above for the full version.

TEST REPORT FCC WPT Test for SLBWC120 Certification APPLICANT SLASH B SLASH Co., LTD. REPORT NO. HCT-RF-2306-FC003 DATE OF ISSUE July 4, 2023 Tested by Jeong Ho Kim Technical Manager Jong Seok Lee Accredited by KOLAS, Republic of KOREA F-TP22-03(Rev.04) HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 1 / 24 The report shall not be reproduced except in full(only partly) without approval of the laboratory. F-TP22-03 (Rev. 04) Page 2 of 24 HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 TEST REPORT FCC WPT Test for SLBWC120 REPORT NO. HCT-RF-2306-FC003 DATE OF ISSUE July 04, 2023 Additional Model - ApplicantSLASH B SLASH Co., LTD. 34F, 63-1, Geumjeong-ro, Geumjeong-gu, Busan, Republic of Korea Eut Type Model Name SLBS Edge Wireless Charger SLBWC120 FCC ID2BBPASLBWC120 Frequency Range: 127 kHz Max. Transmit Power:7.26 dBխd/m @300 m FCC ClassificationPart 15 Low Power Transmitter Below 1705 kHz (DCD) FCC Rule Part(s) FCC Part 15, Subpart C (15.209) The result shown in this test report refer only to the sample(s) tested unless otherwise stated. This test results were applied only to the test methods required by the standard. Report No. HCT-RF-2306-FC003 F-TP22-03 (Rev. 04) Page 3 of 24 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 July 04, 2023 Initial Release Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules under normal use and maintenance. KOLAS Statement: The above Test Report is the accredited test result by (KS Q) ISO/IEC 17025 and KOLAS(Korea Laboratory Accreditation Scheme), which signed the ILAC-MRA. (KOLAS Accreditation No. KT197) If this report is required to confirmation of authenticity, please contact to www.hct.co.kr Report No. HCT-RF-2306-FC003 F-TP22-03 (Rev. 04) Page 4 of 24 CONTENTS 1. EUT DESCRIPTION 5 2. TEST METHODOLOGY 6 EUT CONFIGURATION 6 EUT EXERCISE 6 GENERAL TEST PROCEDURES 6 3. INSTRUMENT CALIBRATION 7 4. FACILITIES AND ACCREDITATIONS 7 FACILITIES 7 EQUIPMENT 7 5. ANTENNA REQUIREMENTS 8 6. MEASUREMENT UNCERTAINTY 8 7. WORST CASE CONFIGURATION 9 8. TEST SUMMARY 11 9. RADIATED EMISSION MEASUREMENT 12 10. POWERLINE CONDUCTED EMISSIONS 18 11. EMISSION BANDWIDTH PLOT 21 12. LIST OF TEST EQUIPMENT 23 13. Annex A_TEST SETUP PHOTO 24 Report No. HCT-RF-2306-FC003 F-TP22-03 (Rev. 04) Page 5 of 24 1. EUT DESCRIPTION Model SLBWC120 Additional Model - EUT Type SLBS Edge Wireless Charger Power Supply DC 9 d Frequency of Operation 127 kHz Max. Transmit Power 7.26 dBխd/m @300 m Travel Adapter Information (For Testing) Model : EP-TA800(SAMSUNG) Type : C to C PDO(Power Data Objective) 5d(3A), 9d(2.77A) PPS(Programmable Power Supply) 3.3-5.9d(3A), 3.3-11d(2.25A) Date(s) of Tests June 08, 2023 ~ June 23, 2023 Serial number BT1131 Manufacturer WITS dINA CO., LTD. Lot CN 16-1, Yen Binh Industrial Park, Hong Tien Ward, Pho Yen City, Thai Nguyen Province, dietnam Report No. HCT-RF-2306-FC003 F-TP22-03 (Rev. 04) Page 6 of 24 2. TEST METHODOLOGY The measurement procedure described in the American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Device (ANSI C63.10-2013) is used in the measurement of the test device. EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. EUT EXERCISE The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.205, 15.207 and 15.209 under the FCC Rules Part 15 Subpart C. GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in Section 6.2 of ANSI C63.10. (dersion :2013) Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-peak and average detector modes. Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane below 1 GHz. Above 1 GHz with 1.5 m using absorbers between the EUT and receive antenna. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3 m away from the receiving antenna, which varied from 1 m to 4 m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the max. emission, the relative positions of this hand-held transmitter (EUT) was rotated through three orthogonal axes according to the requirements in Section 6.6.5 of ANSI C63.10. (dersion: 2013). Report No. HCT-RF-2306-FC003 F-TP22-03 (Rev. 04) Page 7 of 24 3. INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipmentˏs, which is traceable to recognized national standards. Especially, all antenna for measurement is calibrated in accordance with the requirements of C63.5 (dersion : 2017). 4. FACILITIES AND ACCREDITATIONS FACILITIES The SAC(Semi-Anechoic Chamber) and conducted measurement facility used to collect the radiated data a…

Text truncated - open the document above for the full version.

FCC ID: 2BBPASLBWC120 File No. HCT-SR-2307-FC001-P Page 1 of 5 - WPT Test SETUP PHOTOGRAPHS REVISION HISTORY The revision history for this document is shown in table. Revision No. Date of Issue Description 0 July 07, 2023 Initial Release FCC ID: 2BBPASLBWC120 File No. HCT-SR-2307-FC001-P Page 2 of 5 1. DUT Information 1.1 DUT 1.2 Load:15W FCC ID: 2BBPASLBWC120 File No. HCT-SR-2307-FC001-P Page 3 of 5 2. Test setup Configuration 2.1 Front Side: 15cm 2.2 Left Side: 15 cm FCC ID: 2BBPASLBWC120 File No. HCT-SR-2307-FC001-P Page 4 of 5 2.3 Right Side: 15 cm 2.4 Cable Side: 15 cm 2.4 Cable side:15 cm FCC ID: 2BBPASLBWC120 File No. HCT-SR-2307-FC001-P Page 5 of 5 2.5 Top side:20 cm