2BBSE-LH1001Real Scooper_Smart Cat Litter House

1 / 10 Product specification Declaration: Thank you for purchasing LALAHOME REALSCOOPER Smart Cat Litter House. LALAHOME Smartech is committed to making pet life better through the power of design. This manual will help you better understand and use this product. I. User Notice 1. Please install and use the product in strict accordance with the instructions. 2. Place the product on the horizontal ground. 3. The glass of the top window of the product is fragile. Please do not place any articles to avoid safety risks. 4.Do not place the product in high temperature and humidity environment for use. 5. This product is only suitable for clumping cat litter, including mineral litter and crystal litter, tofu litter and other cat litter. Please replace the special spatula when using tofu litter. Do not use non-clump litter. 6. Do not add anything other than clump cat litter into the toilet bin. 7. Do not force your cat into the toilet bin. 8. This product is not suitable for cats less than 6 months old and less than 1KG in weight. 9. The whole product is forbidden to be soaked in water or doused with water. The toilet bin and trash can can be easily removed from the whole machine to be cleaned and dried before assembly. Except for the unloaded bin assembly and litter tray, please soak and wring the body with a towel and wipe it clean. II. Product list Please check the product list and quantity carefully: 1pc of the main engine (including 1pc of the back half of the collection bin, 1pc of the front half of the collection bin, 1pc of the litterdrain step) 1. 2. Adapter x1pc Main engine Collection bin Litterdrain step 2 / 10 3. Cat Scratching Board X 1 pc (optional, purchased separately) 4. Tofu litter special spatula X 1pc (optional, purchased separately) 5. Free special mineral litter X 1 bag 6. Free special garbage bag X 1 roll (12 pieces) 7. Specification x1pc 8. Quick Guide X 1pc III. Product introduction UVgermicidal light(inside) Live induction (inside) Visual window  Head cover Automatic littering bin Detachable blade Control panel Atmosphere Light (Inside) Infrared induction Toilet bin Scoop Toilet door litter drain pedal Ozone deodorizer (inside) Collecting bin Lower body Handle Upper body 3 / 10 IV.Installation instructions 1. Take the product and its accessories out of the packing box. 2. Remove the bin assembly and remove the ① littler drain step from the upper side. 3. Remove the plastic bag from the bag bin on the back of the stool collection bin through the rear wall hole, the end of the plastic bag mouth is pressed on the edge of the stool collection bin with a U-shaped strip, and then back to the sliding bar bar on the stool collection bin to press the other end of the plastic bag mouth, pull the sliding bar to the maximum position, cover the ① litter drain pedal. Note: The operation process should be handled lightly to avoid product bruises and scratches. 1. As shown in the figure below, first take out the parts ②、③combined. 2. Then rotate the left and right front end of the guide rail to the stop position. 3. Remove the plastic bag from Rear-seat plastic bag bin through the hole in the back wall of the collection bin, press one end of the mouth of the plastic bag with a U-shaped strip on the edge of the collection bin, and then return to the strip on the sliding bar of the collection bin to press the other end of the mouth of the plastic bag, pull the sliding bar to the maximum position, and cover the ① litterdrain pedal. the hole in the back wall of the collection bin Rear-seat HDPE bag bin U-shaped strip Folding strip Collection bin Litter drain pedal 4 / 10 4. Install the litter drain step on the bin assembly, or optionally install the cat scratch plate randomly provided on the litter drain step. 5. Put the litter tray④ back into the toilet bin and ensure that it is properly compressed. 6. Load back into the assembled bin. 7. Place the product indoors in a dry place near the power supply, ready for use. 8. Refill litter. - Open top cover to stop position. (The upper cover assembly is equipped with a damper to buffer opening and closing and prevent smashing hands/pets. Please do not flip the lid quickly or forcefully to avoid damaging the damper and the upper cover, etc.) - Pay attention to add litter not exceeding MAX line of warehouse wall to avoid improper closing of top cover. ④ Hold here and hold in place Litter drain pedal 5 / 10 Pay attention to confirm whether the litter drain is closed before adding litter; If not, right click the host operation panel to reset the blade. 9. Clean out the bin. (Refer to the video boot file.) Step 2: Tilt the litter drainpedal to pour the remaining litter brought out by the cat-pad into the bin and remove it. Upper body Max marked with litter line Step 1: Pull out the bin Litter bin Automatic littering blade Control panel Litter drain pedal 6 / 10 V. Instructions for use Step 3: Slide the folding strip of the plastic bag forward to close the mouth of the plastic bag. Step 5: Slide the folding strip back to the largest place and remove the litter bag full of cat litter. Fill the new plastic bag as per step three. Step 4: Turn back the folding strip of the plastic bag and remove the U-shaped strip at the front end; Pull the drawing strip at the mouth of the bag to tighten the plastic bag. U-shaped strip Folding strip Folding strip Folding strip 7 / 10 1. Equipment self-test: Power on (please use the 12V2A adapter equipped with the machine), power on until the equipment self-test is completed (after the self-test is completed, the atmosphere light will be steady on). 2. Add cat litter: Open the top cover, fill the litter bin, cover the top cover, and fill the toilet bin with cat litter from the touch screen point to the MAX position. In order to facilitate the equipment to automatically add litter again when the cat litter allowance is insufficient, please open the top cover and fill the automatic litter bin again. Your equipment will aut…

Text truncated - open the document above for the full version.

Shenzhen Lalahome Smartech Co., Ltd. Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Lalahome Smartech Co., Ltd. Address: Room 803, Tower1, MinYing International Trade Centre, No.1 Hongfu East Road, Dongguan City, Guangdong Province, China Product Name: Real Scooper_Smart Cat Litter House FCC ID: 2BBSE-LH1001 Model(s): LH1001, LH1001-01, LH1001-02, LH1001-03 2.911(d)(5)(i) Equipment Type We, [Shenzhen Lalahome Smartech Co., Ltd.] certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Signature: Name: Fred Wu Date: 2023-06-20 Title and Company name: DQE and Shenzhen Lalahome Smartech Co., Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Lalahome Smartech Co., Ltd. Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Lalahome Smartech Co., Ltd. Address: Room 803, Tower1, MinYing International Trade Centre, No.1 Hongfu East Road, Dongguan City, Guangdong Province, China Product Name: Real Scooper_Smart Cat Litter House FCC ID: 2BBSE-LH1001 Model(s): LH1001, LH1001-01, LH1001-02, LH1001-03 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Lalahome Smartech Co., Ltd.] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Signature: Name: Fred Wu Date: 2023-06-20 Title and Company name: DQE and Shenzhen Lalahome Smartech Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Lalahome Smartech Co., Ltd. Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Lalahome Smartech Co., Ltd. Address: Room 803, Tower1, MinYing International Trade Centre, No.1 Hongfu East Road, Dongguan City, Guangdong Province, China Product Name: Real Scooper_Smart Cat Litter House FCC ID: 2BBSE-LH1001 Model(s): LH1001, LH1001-01, LH1001-02, LH1001-03 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Lalahome Smartech Co., Ltd.] designate [Baihetian Innovative Solutions] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email add ress for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Baihetian Innovative Solutions Address: 6837 Chase Rd, Dearborn, MI 48126, USA FRN: 0033401605 Contact Name: Kenneth Young Telephone No: 313-395-3113 Email: [email protected] Applicant Company name: Shenzhen Lalahome Smartech Co., Ltd. Address: Room 803, Tower1, MinYing International Trade Centre, No.1 Hongfu East Road, Dongguan City, Guangdong Province, China FRN: 0033915133 Contact Name: Fred Wu Telephone No: +86-0769-88621298 Email: [email protected] Shenzhen Lalahome Smartech Co., Ltd. Signature: Title: Manager Signature: Title: DQE Date: 2023-06-20 Date: 2023-06-20 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Shenzhen Lalahome Smartech Co., Ltd. FCC Software Configuration Control Declaration Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number: Real Scooper_Smart Cat Litter House/ LH1001, LH1001- 01, LH1001-02, LH1001-03 Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 V02r01. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Fred Wu Date: 2023-06-20 Title: DQE Signature of applicant

Differences Declaration To whom concern, We company Shenzhen Lalahome Smartech Co., Ltd. hereby declares: The product models LH1001, LH1001-01, LH1001-02, LH1001-03 are identical in the same PCB layout, interior structure and electrical circuits, The differences are appearance color and model name for commercial purpose. Authorized signature: Date: 2023-06-20

Letter of Authorization Company: Shenzhen Lalahome Smartech Co., Ltd. Address: Room 803, Tower1, MinYing International Trade Centre, No.1 Hongfu East Road, Dongguan City, Guangdong Province, China Product Type: Real Scooper_Smart Cat Litter House Model Number(s): LH1001, LH1001-01, LH1001-02, LH1001-03 Product Description: Real Scooper_Smart Cat Litter House We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-06-20 Name: Fred Wu Title: DQE Company: Shenzhen Lalahome Smartech Co., Ltd.

Shenzhen Lalahome Smartech Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-06-20 FCC ID: 2BBSE-LH1001 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description FCC Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Fred Wu Title: DQE

Test Model No.: LH1001 Adapter 1: Adapter 2:

Label location

Test Model No.: LH1001

FCC ID: 2BBSE-LH1001 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation BLE Channel Max output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 2480MHz 3.71 2.35 0.0007 1.0 PASS Remark: antenna gain=1.95dBi Wifi 2.4G Channel Max output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 2462MHz 802.11g 14.90 30.90 0.0096 1.0 PASS Remark: antenna gain=1.95dBi Wifi 5.2G Channel Max output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 5200MHz 802.11a 16.15 41.21 0.0129 1.0 PASS Remark: antenna gain=1.97dBi Wifi 5.3G Channel Max output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 5310MHz 802.11n (HT40) 16.90 48.98 0.0125 1.0 PASS Remark: antenna gain=1.08dBi Wifi 5.6G Channel Max output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 5500MHz 802.11a 17.06 50.82 0.0147 1.0 PASS Remark: antenna gain=1.60dBi Wifi 5.8G Channel Max output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 5795MHz 802.11n(HT 40) 15.67 36.90 0.0060 1.0 PASS Remark: antenna gain=-0.84dBi BT and WIFI Simultaneous Transmission: BLE + 2.4G WIFI +5G WIFI =(0.0007/1)+( 0.0096/1) +(0.0146/1)= 0.0007+0.0096+0.0146=0.0249<1 The max power density is less than MPE exempt limit, so it is compliance.

Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 40 AppendixA1: Emission Bandwidth Test Result Test Mode Antenna Frequency[MHz] Rate 26db EBW [MHz] Limit[MHz] Verdict 11A Ant1 5180 6Mbps 21.18 --- --- 11A Ant1 5200 6Mbps 21.42 --- --- 11A Ant1 5240 6Mbps 20.91 --- --- 11A Ant1 5260 6Mbps 20.73 --- --- 11A Ant1 5280 6Mbps 23.18 --- --- 11A Ant1 5320 6Mbps 21.04 --- --- 11A Ant1 5500 6Mbps 20.71 --- --- 11A Ant1 5580 6Mbps 29.03 --- --- 11A Ant1 5700 6Mbps 20.40 --- --- 11A Ant1 5745 6Mbps 21.81 --- --- 11A Ant1 5785 6Mbps 20.76 --- --- 11A Ant1 5825 6Mbps 20.59 --- --- 11N20SISO Ant1 5180 MCS0 21.54 --- --- 11N20SISO Ant1 5200 MCS0 21.22 --- --- 11N20SISO Ant1 5240 MCS0 21.58 --- --- 11N20SISO Ant1 5260 MCS0 27.17 --- --- 11N20SISO Ant1 5280 MCS0 24.44 --- --- 11N20SISO Ant1 5320 MCS0 22.11 --- --- 11N20SISO Ant1 5500 MCS0 21.33 --- --- 11N20SISO Ant1 5580 MCS0 23.78 --- --- 11N20SISO Ant1 5700 MCS0 21.63 --- --- 11N20SISO Ant1 5745 MCS0 20.87 --- --- 11N20SISO Ant1 5785 MCS0 21.06 --- --- 11N20SISO Ant1 5825 MCS0 24.85 --- --- 11N40SISO Ant1 5190 MCS0 39.21 --- --- 11N40SISO Ant1 5230 MCS0 54.59 --- --- 11N40SISO Ant1 5270 MCS0 46.35 --- --- 11N40SISO Ant1 5310 MCS0 38.46 --- --- 11N40SISO Ant1 5510 MCS0 45.89 --- --- 11N40SISO Ant1 5550 MCS0 52.89 --- --- 11N40SISO Ant1 5670 MCS0 38.54 --- --- 11N40SISO Ant1 5755 MCS0 39.62 --- --- 11N40SISO Ant1 5795 MCS0 38.59 --- --- Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 40 Test Graphs 11A-Ant1-5180 11A-Ant1-5200 11A-Ant1-5240 11A-Ant1-5260 11A-Ant1-5280 11A-Ant1-5320 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 40 11A-Ant1-5500 11A-Ant1-5580 11A-Ant1-5700 11A-Ant1-5745 11A-Ant1-5785 11A-Ant1-5825 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 40 11N20SISO-Ant1-5180 11N20SISO-Ant1-5200 11N20SISO-Ant1-5240 11N20SISO-Ant1-5260 11N20SISO-Ant1-5280 11N20SISO-Ant1-5320 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 40 11N20SISO-Ant1-5500 11N20SISO-Ant1-5580 11N20SISO-Ant1-5700 11N20SISO-Ant1-5745 11N20SISO-Ant1-5785 11N20SISO-Ant1-5825 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 6 of 40 11N40SISO-Ant1-5190 11N40SISO-Ant1-5230 11N40SISO-Ant1-5270 11N40SISO-Ant1-5310 11N40SISO-Ant1-5510 11N40SISO-Ant1-5550 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 7 of 40 11N40SISO-Ant1-5670 11N40SISO-Ant1-5755 11N40SISO-Ant1-5795 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 8 of 40 AppendixA2: Occupied channel bandwidth Test Result Test Mode Antenna Frequency[MHz] Rate OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11A Ant1 5180 6Mbps 16.963 5171.5209 5188.4839 --- --- 11A Ant1 5200 6Mbps 16.907 5191.4929 5208.3999 --- --- 11A Ant1 5240 6Mbps 17.134 5231.4084 5248.5424 --- --- 11A Ant1 5260 6Mbps 16.942 5251.4678 5268.4098 --- --- 11A Ant1 5280 6Mbps 17.047 5271.4246 5288.4716 --- --- 11A Ant1 5320 6Mbps 16.983 5311.4489 5328.4319 --- --- 11A Ant1 5500 6Mbps 17.004 5491.4641 5508.4681 --- --- 11A Ant1 5580 6Mbps 17.307 5571.2636 5588.5706 --- --- 11A Ant1 5700 6Mbps 16.916 5691.4688 5708.3848 --- --- 11A Ant1 5745 6Mbps 16.999 5736.4356 5753.4346 --- --- 11A Ant1 5785 6Mbps 17.039 5776.4013 5793.4403 --- --- 11A Ant1 5825 6Mbps 16.950 5816.4765 5833.4265 --- --- 11N20SISO Ant1 5180 MCS0 18.040 5170.9421 5188.9821 --- --- 11N20SISO Ant1 5200 MCS0 17.921 5191.0052 5208.9262 --- --- 11N20SISO Ant1 5240 MCS0 17.899 5231.0209 5248.9199 --- --- 11N20SISO Ant1 5260 MCS0 18.117 5250.9277 5269.0447 --- --- 11N20SISO Ant1 5280 MCS0 17.991 5270.9854 5288.9764 --- --- 11N20SISO Ant1 5320 MCS0 17.902 5310.9884 5328.8904 --- --- 11N20SISO Ant1 5500 MCS0 17.924 5491.0324 5508.9564 --- --- 11N20SISO Ant1 5580 MCS0 18.022 5570.9481 5588.9701 --- --- 11N20SISO Ant1 5700 MCS0 17.960 5690.9431 5708.9031 --- --- 11N20SISO Ant1 5745 MCS0 17.918 5736.0083 5753.9263 --- --- 11N20SISO Ant1 5785 MCS0 17.877 5775.9922 5793.8692 --- --- 11N20SISO Ant1 5825 MCS0 18.019 5815.9494 5833.9684 --- --- 11N40SISO Ant1 5190 MCS0 35.948 5172.0268 5207.9748 --- --- 11N40SISO Ant1 5230 MCS0 35.993 5211.9961 5247.9891 --- --- 11N40SISO Ant1 5270 MCS0 35.965 5252.0194 5287.9844 --- --- 11N40SISO An…

Text truncated - open the document above for the full version.

Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 11 of 40 11N20SISO-Ant1-5180 11N20SISO-Ant1-5200 11N20SISO-Ant1-5240 11N20SISO-Ant1-5260 11N20SISO-Ant1-5280 11N20SISO-Ant1-5320 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 12 of 40 11N20SISO-Ant1-5500 11N20SISO-Ant1-5580 11N20SISO-Ant1-5700 11N20SISO-Ant1-5745 11N20SISO-Ant1-5785 11N20SISO-Ant1-5825 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 13 of 40 11N40SISO-Ant1-5190 11N40SISO-Ant1-5230 11N40SISO-Ant1-5270 11N40SISO-Ant1-5310 11N40SISO-Ant1-5510 11N40SISO-Ant1-5550 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 14 of 40 11N40SISO-Ant1-5670 11N40SISO-Ant1-5755 11N40SISO-Ant1-5795 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 15 of 40 AppendixA3: Min emission bandwidth Test Result B4 Test Mode Antenna Frequency[MHz] Rate 6db EBW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11A Ant1 5745 6Mbps 16.320 5736.800 5753.120 0.5 PASS 11A Ant1 5785 6Mbps 16.280 5776.840 5793.120 0.5 PASS 11A Ant1 5825 6Mbps 16.280 5816.800 5833.080 0.5 PASS 11N20SISO Ant1 5745 MCS0 17.160 5736.560 5753.720 0.5 PASS 11N20SISO Ant1 5785 MCS0 17.520 5776.200 5793.720 0.5 PASS 11N20SISO Ant1 5825 MCS0 17.160 5816.560 5833.720 0.5 PASS 11N40SISO Ant1 5755 MCS0 34.160 5738.360 5772.520 0.5 PASS 11N40SISO Ant1 5795 MCS0 34.080 5778.440 5812.520 0.5 PASS Test Graphs B4 11A-Ant1-5745 11A-Ant1-5785 11A-Ant1-5825 11N20SISO-Ant1-5745 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 16 of 40 11N20SISO-Ant1-5785 11N20SISO-Ant1-5825 11N40SISO-Ant1-5755 11N40SISO-Ant1-5795 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 17 of 40 AppendixB: Duty Cycle Test Result Test Mode Antenna Frequency[MHz] Rate Transmission Duration [ms] Transmission Period [ms] Duty Cycle [%] 11A Ant1 5180 6Mbps 2.06 2.20 93.64 11A Ant1 5200 6Mbps 2.07 2.20 94.09 11A Ant1 5240 6Mbps 2.06 2.20 93.64 11A Ant1 5260 6Mbps 2.06 2.20 93.64 11A Ant1 5280 6Mbps 2.06 2.19 94.06 11A Ant1 5320 6Mbps 2.06 2.20 93.64 11A Ant1 5500 6Mbps 2.07 2.20 94.09 11A Ant1 5580 6Mbps 2.06 2.20 93.64 11A Ant1 5700 6Mbps 2.06 2.20 93.64 11A Ant1 5745 6Mbps 2.06 2.20 93.64 11A Ant1 5785 6Mbps 2.06 2.19 94.06 11A Ant1 5825 6Mbps 2.06 2.19 94.06 11N20SISO Ant1 5180 MCS0 1.92 2.05 93.66 11N20SISO Ant1 5200 MCS0 1.92 2.05 93.66 11N20SISO Ant1 5240 MCS0 1.92 2.06 93.20 11N20SISO Ant1 5260 MCS0 1.92 2.05 93.66 11N20SISO Ant1 5280 MCS0 1.92 2.05 93.66 11N20SISO Ant1 5320 MCS0 1.92 2.05 93.66 11N20SISO Ant1 5500 MCS0 1.92 2.06 93.20 11N20SISO Ant1 5580 MCS0 1.92 2.05 93.66 11N20SISO Ant1 5700 MCS0 1.92 2.06 93.20 11N20SISO Ant1 5745 MCS0 1.92 2.05 93.66 11N20SISO Ant1 5785 MCS0 1.92 2.05 93.66 11N20SISO Ant1 5825 MCS0 1.92 2.05 93.66 11N40SISO Ant1 5190 MCS0 0.95 1.08 87.96 11N40SISO Ant1 5230 MCS0 0.94 1.08 87.04 11N40SISO Ant1 5270 MCS0 0.95 1.08 87.96 11N40SISO Ant1 5310 MCS0 0.94 1.08 87.04 11N40SISO Ant1 5510 MCS0 0.94 1.08 87.04 11N40SISO Ant1 5550 MCS0 0.95 1.08 87.96 11N40SISO Ant1 5670 MCS0 0.94 1.08 87.04 11N40SISO Ant1 5755 MCS0 0.94 1.08 87.04 11N40SISO Ant1 5795 MCS0 0.95 1.08 87.96 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 18 of 40 Test Graphs NTNV-11A-Ant1-5180 NTNV-11A-Ant1-5200 NTNV-11A-Ant1-5240 NTNV-11A-Ant1-5260 NTNV-11A-Ant1-5280 NTNV-11A-Ant1-5320 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 19 of 40 NTNV-11A-Ant1-5500 NTNV-11A-Ant1-5580 NTNV-11A-Ant1-5700 NTNV-11A-Ant1-5745 NTNV-11A-Ant1-5785 NTNV-11A-Ant1-5825 Report No.:GTS2023050091F03-F05 Global United Technology Services Co., Ltd. No. 123- 128, Tow…

Text truncated - open the document above for the full version.