2BBTG-CONNECTPRO4G Smartphone

Connect Pro Quick Guide Scan QR Code to: Access interactive set up guides Learn more about G-mee Play Pro Access hints and tips Connect with G-mee Customer Care Or visit www.g-mee.com/quick-set-up Pg. 2 | G-mee Quick Set Up Guide G-mee Key Parts Pg. 3 | G-mee Quick Set Up Guide G-mee Key Parts Android is a trademark of Google LLC. Product and Brand G-mee Connect Pro Type Smartphone Operating System Android TM 13 Wi-Fi 2.4 GHz and 5.0 GHz Bluetooth 5.0 Voltage 5V Power Source Li - ion 3000mah Audio Jack 3.5mm Internal Memory 64 GB (up to 128 GB, *not included) External Memory Micro SD RAM 4 GB Product Dimension 152.5*73*9.8mm Product Weight 180 grams SIM Dual Sim Screen Size 5.72” Battery Included Yes SPECIFICATIONS: Pg. 4 | G-mee Quick Set Up Guide FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This 4G Smartphone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the S AR limi t of USA (FCC) is 1.6 W/kg avera ged over one g ram of tissue . Device types: T ablet has also been t ested again st this SAR limi t. This device was tested for typica l body-worn operations with the bac k of the device kept 10mm fr om the body . T o maintain compliance with FCC RF exposure re quirement s, use accessories tha t maintain an 10mm separation distance b etween t he user's body and the bac k of the device . The use of be lt clips, holsters and similar accessories should not contain me tallic componen ts in it s assembly . The use of accessories tha t do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-6-30> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BBTG-CONNECTPRO Connect Pro For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Charles Brown/CEO Company: G-MEE LLC Address: 2803 Philadelphia Pike B # 4040 Claymont, DE 19703, USA Phone: 302 927 1183 E-Mail: [email protected]

FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 9 Appearance of EUT NFC Antenna

FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Appendix IID Label 4G Smartphone FCC ID: 2BBTG-CONNECTPRO Model: Connect Pro This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Appendix II ID Label Location

FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 10 Internal of EUT Photo 11 Internal of EUT FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 12 Internal of EUT Photo 13 Internal of EUT BT/WIFI Antenna 2G/3G/4G Antenna FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 14 Internal of EUT Photo 15 Appearance of PCB FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 16 Appearance of PCB Photo 17 Appearance of PCB FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 18 Appearance of PCB Photo 19 Appearance of PCB FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 20 Appearance of PCB Photo 21 Appearance of PCB FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 22 Appearance of PCB Photo 23 Appearance of PCB FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Photo 24 Battery parameters

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 155 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName:G-MEEPTYLTD Address:2803PhiladelphiaPikeB#4040Claymont,DE19703,USA EUTName:4GSmartphone ModelNumber:ConnectPro BrandName:G-Mee IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF230625R00101 TestStandards: 47CFRPart2.1093IEEE1528-2013IEEEC95.1-2019 KDB447498D01KDB865664D01KDB865664D02 KDB941225D01KDB941225D05KDB248227D01 KDB941225D06KDB648474D04KDB690783D01 FCCID:2BBTG-CONNECTPRO TestConclusion:Pass TestDate:2023-06-25to2023-06-27 DateofIssue:2023-06-28 PreparedBy: MonicaZhou/ProjectEngineer Date:2023-06-28 ApprovedBy: Ryan.CJ/EMCManager Date:2023-06-28 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF230625R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 155 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02023-06-28Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF230625R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 155 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction .........................................................................................................................................................................................................................4 1.1IdentificationofTestingLaboratory......................................................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation............................................................................................................................................4 1.3LaboratoryCondition..............................................................................................................................................................................................4 1.4Announcement........................................................................................................................................................................................................4 2.ProductInformation ...........................................................................................................................................................................................................5 2.1ApplicationInformation...........................................................................................................................................................................................5 2.2ManufacturerInformation .......................................................................................................................................................................................5 2.3FactoryInformation.................................................................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).......................................................................................................................................5 2.5EquipmentunderTestAncillaryEquipment .......................................................................................................................................................5 2.6TechnicalInformation .............................................................................................................................................................................................5 3.SummaryofTestResults .................................................................................................................................................................................................7 3.1TestStandards........................................................................................................................................................................................................7 3.2DeviceCategoryandSARLimit ...........................................................................................................................................................................7 3.3TestResultSummary .............................................................................................................................................................................................8 3.4TestUncertainty ......................................................................................................................................................................................................9 4.MeasurementSystem.....................................................................................................................................................................................................11 4.1SpecificAbsorptionRate(SAR)Definition.................................................................................................................................…

Text truncated - open the document above for the full version.

深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 testreport Customer name ChengfengProject name PO575 American version Debugging frequency band GSM4P,W2/4/5,LTE:B2/4/5/Structural mode FPC 7/12/14/17/28A/28B/29/30 /66/71 Radio frequency engineer XieZhixiongconstruction engineer DuQiang Antenna type Loopdate2023-7-20 深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 Summaryofreportversion conductiondataofeach antennamatchingcircuitand passiveparameters OTAtestdataofmainantenna GPSMeasured Effect Environmental Treatmentof WholeMachine Summaryofrisk warningindebugging process ImportedfromFrance'sSATIMO company'sStarLab3Dlaboratory,itcan accuratelyandquicklytesttheTRP,TIS, efficiency,gain,Applechart,directional chartandotherparameterdataof communicationterminalproductssuchas mobilephones,tabletcomputersand notebooks. 、 深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 Summaryofreportversion versiondateContent overview V1.02023-1-6shakedow n test/debug V2.02023-1-14Sample repair V3.02023-3-13Trial productio n prototype V4.02023-3-20Mold sample V5.0 V6.0 深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 Attacha0ohm resistoratRF1. Sticka0ohm resistorhere. Thereisno18NH inductancehere. Thesetwo placesare empty. Attacha12NH inductortoRF3. Sticka0ohm resistorhere. Attach22NHinductor toRF4. Attach3.9NHinductor toRF2. Thesetwoplacesare connectedinserieswith0 Mainantennamatchingcircuit ElementE1E2E3E4 Value18NH 0ou NC 0ou Ourcompanychangesthemainantennamatchingcircuit!!! Description:antennaswitchlogic 1.ControlGSM900/1800/1900,W2/4,LTE-B2/4/7/30/66atRF1. 2.GSM850,W5andLTE-B5arecontrolledatRF2. 3.ControlLTE-B12/14/17/28A/B/29atRF3. 4.ControlLTE-B71atRF4. 深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 Thereisno6.2NH inductancehere. Sticka0ohm resistorhere. Here,a0ohm resistoris connectedinseries Sticka0ohm resistorhere. Attacha0ohm resistoratRF1. Attach27NHinductor toRF3. Attach6.2NHinductor toRF2. Attach33NHinductor toRF4. Diversityantennamatchingcircuit ElementE1E2E3 Value6.2NH 0ou NC Ourcompanychangesthediversitymatchingcircuit! Description:antennaswitchlogic 1.ControlGSM900/1800/1900,W2/4,LTE-B2/4/7/30/66at1.RF1. 2.GSM850,W5andLTE-B5arecontrolledat2.RF2. 3.ControlLTE-B12/14/17/28A/B/29at3.RF3. 4.ControlLTE-B71at4.RF4. 深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 Three-in-oneantennamatchingcircuit ElementE1E2E3 ValueNC 0ou NC Ourcompanyhasnotchangedthematchingcircuitofthethree-in-oneantenna! 深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 Mainboardconductiondata(lowfrequencylinelosscompensation0.5dBm, mediumfrequencylinelosscompensation0.8dBmandhighfrequencylineloss compensation1.0dBm) Singleprincipalset BandChannelPower(dBm)Sensitivity (dBm) BandChannelPower(dBm)Sensitivity (dBm) GSM900 L32.4 DCS1800 L29.3 M32.5M29.3 H32.5-110.0H29.2-107.8 GSM850 L32.6 PCS1900 L29.5 M32.7M29.4 H32.8-109.0H29.2-107.8 W850 L22.2 W1700 L21.7 M22.2M21.7 H22.2H21.7 W1900 L22.0 LTE-B2 （10MHZ ） L22.5 M22.0M22.5 H22.0H22.5 LTE-B4 （10MHZ ） L22.6 LTE-B5 （10MHZ ） L22.9 M22.7M22.9 H22.7H22.9 LTE-B7 （10MHZ ） L23.0 LTE-B12 （10MHZ ） L22.6 M23.0M22.8 H23.0H22.7 LTE-B14 （10MHZ ） L LTE-B17 （10MHZ ） L22.8 M23.0M22.7 HH22.7 LTE- B28A （10MHZ ） L22.6 LTE-B28B （10MHZ ） L22.6 M22.6M22.6 H22.6H22.6 LTE-B29 （10MHZ ） L LTE-B30 （10MHZ ） L22.6 MM22.6 HH22.6 LTE-B66 （10MHZ ） L22.6 LTE-B71 （10MHZ ） L22.6 M22.6M22.6 H22.6H22.7 深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 MainantennaFsOTAdata: BandChannelTRP(dBm)TIS(dBm)BandChannelTRP(dBm)TIS(dBm) GSM900 L24.5 DCS1800 L24.1 M24.5M24.0 H24.1-100.0H24.0-103.0 GSM850 L24.0 PCS1900 L25.1 M24.3M25.2 H24.5-101.2H24.6-102.2 W850 L15.0 W1700 L16.0 M14.5M16.1 H14.8-103.0H16.7-104.0 W1900 L17.8 LTE-B2 （10MHZ ） L17.5 M17.6M17.4 H17.7-104.5H16.5-92.5 LTE-B4 （10MHZ ） L15.5 LTE-B5 （10MHZ ） L15.0 M15.6M15.1 H16.0-92.5H15.2-92.0 LTE-B7 （10MHZ ） L16.0 LTE-B12 （10MHZ ） L15.0 M17.0M15.2 H17.1-91.2H15.1-92.0 LTE-B14 （10MHZ ） L14.5 LTE-B17 （10MHZ ） L15.2 M14.3M15.2 H14.5-92.5H15.0-92.2 LTE- B28A （10MHZ ） L15.0 LTE-B28B （10MHZ ） L15.1 M15.1M15.0 H15.0-92.0H15.2-92.2 LTE-B30 （10MHZ ） L15.6 LTE-B66 （10MHZ ） L15.5 M15.7M15.7 H15.7-92.7H16.2-92.5 LTE-B71 （10MHZ ） L14.3 M14.3 H14.5-88.7 Description:mainantennaswitchlogic 1.ControlGSM900/1800/1900,W2/4,LTE-B2/4/7/30/66at1.RF1. 2.GSM850,W5andLTE-B5arecontrolledat2.RF2. 3.ControlLTE-B12/14/17/28A/B/29at3.RF3. 4.ControlLTE-B71at4.RF4. 深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 Diversityantennaswitchinglogic: 1.ControlGSM900/1800/1900,W2/4,LTE-B2/4/7/30/66at1.RF1. 2.GSM850,W5andLTE-B5arecontrolledat2.RF2. 3.ControlLTE-B12/14/17/28A/B/29at3.RF3. 4.ControlLTE-B71at4.RF4. Remarks:Theantennashrapnelofthemotherboardsmallboardhasnotbeenchanged. Antennagain: G900:-0.8dbi G850:-0.9dbi DCS1800:0.2dbi PCS1900:0.3dbi W850:-0.9dbi W1700:0.3dbi W1900:0.2dbi LTE-B2:0.3dbi LTE-B4:0.2dbi LTE-B5:-0.9dbi LTE-B7:0.6dbi LTE-B12:- 1.1dbiLTE- B13:-1.3dbi LTE-B17:- 1.1dbiLTE- B28:-1.1dbi LTE-B30:- 0.9dbiLTE- B66:0.2dbiLTE- B71:-1.3dbi GPS：0.8dbi 2.4GWiFi ： 0.6dbi BT:0.6dbi 5GWIFI ： 1.0dbi NFC:0dbi 深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 NFCdebugging: S11parameter: 深圳市安弗特电子有限公司 AFTtechElectronicCo.,Ltd.(Shenzhen) 地址：深圳市龙华区大浪街道华宁路40号港深创新园B栋3楼302室电话：0755-27888203传真：0755-27888450 Matchingchanges: C1730/C1731 Changeto18PF. C1732/C1733 Changeto150PF C1738/C1739 Changeitto220PF C1740/C1741 Changeto82PF C1744 Changeto18PF. Readingdistanceofvariouscar…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202304-0231-10 Page: 1 of 70 FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 RF Test Data for Bluetooth(BDR+EDR) (Conducted Measurements) General Description of EUT Product Name: 4G Smartphone Test Model: Connect Pro Sample ID: 202304-0231-9-#2 Environmental Conditions Temperature: 25°C Relative Humidity: 55% Test Voltage: DC 3.8V Test Engineer: Huang jian ping Note: For a more detailed features description, please refer to the report TBR-C-202304-0231-10 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202304-0231-10 Page: 2 of 70 FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Contents 1. Duty Cycle ............................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ..................................................................................................................................................... 9 3. -20dB Bandwidth ................................................................................................................................................................................... 16 4. Occupied Channel Bandwidth ............................................................................................................................................................. 22 5. Band Edge ............................................................................................................................................................................................. 28 6. Band Edge(Hopping) ............................................................................................................................................................................ 35 7. Conducted RF Spurious Emission ...................................................................................................................................................... 42 8. Restrict Band ......................................................................................................................................................................................... 52 9. Carrier Frequencies Separation .......................................................................................................................................................... 59 10. Number of Hopping Channel ............................................................................................................................................................. 62 11. Dwell Time ........................................................................................................................................................................................... 65 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202304-0231-10 Page: 3 of 70 FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 30.4 5.17 2.63 NVNT 1-DH1 2441 Ant1 30.4 5.17 2.63 NVNT 1-DH1 2480 Ant1 30.4 5.17 2.63 NVNT 2-DH1 2402 Ant1 30.4 5.17 2.63 NVNT 2-DH1 2441 Ant1 30.4 5.17 2.63 NVNT 2-DH1 2480 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2480 Ant1 31.2 5.06 2.56 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202304-0231-10 Page: 4 of 70 FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202304-0231-10 Page: 5 of 70 FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202304-0231-10 Page: 6 of 70 FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202304-0231-10 Page: 7 of 70 FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2402MHz Ant1 Duty Cycle NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202304-0231-10 Page: 8 of 70 FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202304-0231-10 Page: 9 of 70 FCC ID:2BBTG-CONNECTPRO TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 5.773 21 Pass NVNT 1-DH1 2441 Ant1 4.734 21 Pass NVNT 1-DH1 2480 Ant1 5.721 21 Pass NVNT 2-DH1 2402 Ant1 4.693 21 Pass NVNT 2-DH1 2441 Ant1 3.683 21 Pass NVNT 2-DH1 2480 Ant1 4.861 21 Pass NVNT 3-DH1 …

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202304-0231-10 Page: 1 of 58 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID:2BBTG-CONNECTPRO Original Grant Report No. : TBR-C-202304-0231-10 Applicant : G-MEE LLC Equipment Under Test (EUT) EUT Name : 4G Smartphone Model No. : Connect Pro Series Model No. : Connect Pro L Brand Name : G-Mee Sample ID : 202304-0231-9#1 & 202304-0231-9#2 Receipt Date : 2023-05-15 Test Date : 2023-05-15 to 2023-06-30 Issue Date : 2023-06-30 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Camille Li Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202304-0231-10 Page: 2 of 58 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 6 1.1 Client Information ................................................................................................................. 6 1.2 General Description of EUT (Equipment Under Test) ................................................... 6 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 8 1.4 Description of Support Units .............................................................................................. 8 1.6 Description of Test Software Setting .............................................................................. 10 1.7 Measurement Uncertainty ................................................................................................ 10 1.8 Test Facility ......................................................................................................................... 11 2. TEST SUMMARY ..................................................................................................................... 12 3. TEST SOFTWARE ................................................................................................................... 12 4. TEST EQUIPMENT .................................................................................................................. 13 5. CONDUCTED EMISSION ....................................................................................................... 15 5.1 Test Standard and Limit .................................................................................................... 15 5.2 Test Setup ........................................................................................................................... 15 5.3 Test Procedure ................................................................................................................... 15 5.4 Deviation From Test Standard ......................................................................................... 16 5.5 EUT Operating Mode ........................................................................................................ 16 5.6 Test Data ............................................................................................................................. 16 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 17 6.1 Test Standard and Limit .................................................................................................... 17 6.2 Test Setup ........................................................................................................................... 18 6.3 Test Procedure ................................................................................................................... 19 6.4 Deviation From Test Standard ......................................................................................... 21 6.5 EUT Operating Mode ........................................................................................................ 21 6.6 Test Data ............................................................................................................................. 21 7. EMISSIONS IN RESTRICTED BANDS ............................................................................... 22 7.1 Test Standard and Limit .................................................................................................... 22 7.2 Test Setup ........................................................................................................................... 22 7.3 Test Procedure ................................................................................................................... 23 7.4 Deviation From Test Standard ......................................................................................... 25 7.5 EUT Operating Mode ........................................................................................................ 25 Report No.: TBR-C-202304-0231-10 Page: 3 of 58 TB-RF-074-1.0 7.6 Test Data ........…

Text truncated - open the document above for the full version.