2BBTR-S162Four axis aircraft (DRONE)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: UGK-LVMUNITEDINC FRN: 0033476375 Contact Name: Jimmychen Address: 6547NAcademyBlvd#2266,ColoradoSprings,CO80918 Telephone No: 001-323-51 04660 Email: [email protected] Applicant: Company name: Shantou Youtuo Toy Trading Company Grantee code: 2BBTR FCC ID: 2BBTR-S162 Contact Name: Abby cai Address: Neilong Industrial, Waisha Town, Longhu District, Shantou City, China Telephone: 18923917860 Fax: 18923917860 E-mail: [email protected] [Shantou Youtuo Toy Trading Company] certifies that, as of the date of this filing of the application with the TCB, [UGK-LVMUNITEDINC] is our designated US agent for service of process for the above referenced FCC ID. [Shantou Youtuo Toy Trading Company] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [UGK-LVMUNITEDINC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2023/06/25 Applicant’s Name: Abby cai US Agent’s Name: Jimmychen Title: Manager Title: Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shantou Youtuo Toy Trading Company Grantee code: 2BBTR FCC ID: 2BBTR-S162 Contact Name: Abby cai Address: Neilong Industrial, Waisha Town, Longhu District, Shantou City, China Telephone: 18923917860 Fax: 18923917860 E-mail: [email protected] i. [Shantou Youtuo Toy Trading Company] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shantou Youtuo Toy Trading Company] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shantou Youtuo Toy Trading Company] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2023/06/25 Applicant’s Name: Abby cai Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shantou Youtuo Toy Trading Company Product Similarity Declaration Company: Shantou Youtuo Toy Trading Company Address: Neilong Industrial, Waisha Town, Longhu District, Shantou City, China Product Name: Four axis aircraft（DRONE） Model Number: S162 MTE1088(E88), E68, E88, E98, E58, S32T, S60, S61, S62, S63, S65, S66, S67, S68, S69, S72, S75, S76, S78, S79, S80, S81, S82, S83, S85, S86, S87, S88, S89, S90, S91, S92, S93, S95, S96, S97, S98, S99, S101, S103, S105, S106, S107, S108, S109, S115, S116, S118, S122, S123, S125, S126, S127, S128, S129, S130, S131, S132, S135, S136, S137, S138, S139, S150, S151, S152, S153, S154, S155, S159, S160, S161, S163, S166, S168, S169, S170, S72, 800, 805, 601, 809, 810, 812, 816, 806, YT60, YT61, YT62, YT63, YT65, YT66, YT67, YT68, YT69, YT72, YT75, YT76, YT78, YT79, YT80, YT81, YT82, YT83, YT85, YT86, YT87, YT88, YT89, YT90, YT91, YT92, YT93, YT95, YT96, YT97, YT98, YT99, YT101, YT103, YT105, YT106, YT107, YT108, YT109, YT115, YT116, YT118, YT122, YT123, YT125, YT126, YT127, YT128, YT129, YT130, YT131, YT132, YT135, YT136, YT137, YT138, YT139, YT150, YT151, YT152, YT153, YT154, YT155, YT159, YT160, YT161, YT162, YT163, YT166, YT168, YT169, YT170, YT172 FCC Identifier: 2BBTR-S162 We (Shantou Youtuo Toy Trading Company) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and appearance color. Client’s signature Name: Abby cai Date: 2023-06-25 Title: Manager Signature of applicant:

Shantou Youtuo Toy Trading Company 1/1 Letter of Authorization Company: Shantou Youtuo Toy Trading Company Address: Neilong Industrial, Waisha Town, Longhu District, Shantou City, China Product Name: Four axis aircraft（DRONE） Model Number: S162 MTE1088(E88), E68, E88, E98, E58, S32T, S60, S61, S62, S63, S65, S66, S67, S68, S69, S72, S75, S76, S78, S79, S80, S81, S82, S83, S85, S86, S87, S88, S89, S90, S91, S92, S93, S95, S96, S97, S98, S99, S101, S103, S105, S106, S107, S108, S109, S115, S116, S118, S122, S123, S125, S126, S127, S128, S129, S130, S131, S132, S135, S136, S137, S138, S139, S150, S151, S152, S153, S154, S155, S159, S160, S161, S163, S166, S168, S169, S170, S72, 800, 805, 601, 809, 810, 812, 816, 806, YT60, YT61, YT62, YT63, YT65, YT66, YT67, YT68, YT69, YT72, YT75, YT76, YT78, YT79, YT80, YT81, YT82, YT83, YT85, YT86, YT87, YT88, YT89, YT90, YT91, YT92, YT93, YT95, YT96, YT97, YT98, YT99, YT101, YT103, YT105, YT106, YT107, YT108, YT109, YT115, YT116, YT118, YT122, YT123, YT125, YT126, YT127, YT128, YT129, YT130, YT131, YT132, YT135, YT136, YT137, YT138, YT139, YT150, YT151, YT152, YT153, YT154, YT155, YT159, YT160, YT161, YT162, YT163, YT166, YT168, YT169, YT170, YT172 FCC Identifier: 2BBTR-S162 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Abby cai Date: 2023-06-25 Title: Manager Signature of applicant:

Shantou Youtuo Toy Trading Company 1/1 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-06-25 Subject: Request for Confidentiality FCC ID: 2BBTR-S162 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual No ☐ Internal Photos No ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Abby cai Date: 2023-06-25 Title: Manager Signature of applicant:

Size:18*12mm M/N: S162 FCC ID: 2BBTR-S162 Label location

ANT

FCC ID: 2BBTR-S162 RF Exposure Evaluation According to KDB 447498 D01 V06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f (GHz) ] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f (GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison EIRP=E Meas +20log(d Meas )-104.7 EIRP is the equivalent isotropically radiated power, in dBm E Meas is the field strength of the emission at the measurement distance, in dBμV/m d Meas is the measurement distance, in m Here, For 2.4G Field strength (dBuV/m) EIRP (dBm) Max tune-up (mW) Frequency (MHz) Min. distance(mm) Calc. thresholds limit 84.33 -10.83 0.083 2475 5 0.026 3.0 So a SAR test is not required

Summary Antenna Specification ITEMANT SPEC Model Name2.4G ANT MAX. Gain 1.08dBi PolarizationHorizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance50 Ohm Antenna Length38.20mm Manufacture Shantou Flying Technology Inc. ÏÚ 2 ‹ Œøº∑ø ̈∑±≤ Ω∏øÆøΩ ̈ªÆ∑≠ ̈∑Ω≠ ±∫ ø≤ ̈ª≤≤ø PHI 0° PHI90° THETA90 ° Frequency VNA (MHz) Gain (Peak) (dBi) 2400MHz0.0403503 2410MHz0.0886264 2420MHz0.267381 2430MHz0.193012 2440MHz0.26366 2450MHz0.0723139 2460MHz0.36895 2470MHz0.551525 2480MHz0.640702 2490MHz1.05232 2500MHz1.08443 Unit:dB

Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20230619044E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 30 FCC Part 15C Test Report FCC ID: 2BBTR-S162 Applicant: Shantou Youtuo Toy Trading Company Address: Neilong Industrial, Waisha Town, Longhu District, Shantou City, China Manufacturer: Shantou Youtuo Toy Trading Company Address: Neilong Industrial, Waisha Town, Longhu District, Shantou City, China EUT: Four axis aircraft（DRONE） Trade Mark: N/A Model Number: S162 MTE1088(E88), E68, E88, E98, E58, S32T, S60, S61, S62, S63, S65, S66, S67, S68, S69, S72, S75, S76, S78, S79, S80, S81, S82, S83, S85, S86, S87, S88, S89, S90, S91, S92, S93, S95, S96, S97, S98, S99, S101, S103, S105, S106, S107, S108, S109, S115, S116, S118, S122, S123, S125, S126, S127, S128, S129, S130, S131, S132, S135, S136, S137, S138, S139, S150, S151, S152, S153, S154, S155, S159, S160, S161, S163, S166, S168, S169, S170, S72, 800, 805, 601, 809, 810, 812, 816, 806, YT60, YT61, YT62, YT63, YT65, YT66, YT67, YT68, YT69, YT72, YT75, YT76, YT78, YT79, YT80, YT81, YT82, YT83, YT85, YT86, YT87, YT88, YT89, YT90, YT91, YT92, YT93, YT95, YT96, YT97, YT98, YT99, YT101, YT103, YT105, YT106, YT107, YT108, YT109, YT115, YT116, YT118, YT122, YT123, YT125, YT126, YT127, YT128, YT129, YT130, YT131, YT132, YT135, YT136, YT137, YT138, YT139, YT150, YT151, YT152, YT153, YT154, YT155, YT159, YT160, YT161, YT162, YT163, YT166, YT168, YT169, YT170, YT172 Date of Receipt: Jun. 12, 2023 Test Date: Jun. 12, 2023 - Jun. 19, 2023 Date of Report: Jun. 19, 2023 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No.8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China Applicable Standards: FCC PART 15 C 15.249 ANSI C63.10:2013 Test Result: Pass Report Number: DL-20230619044E Prepared (Test Engineer): Pxing Huang Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20230619044E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 30 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 MEASUREMENT UNCERTAINTY 4 2 . GENERAL INFORMATION 5 2.1 GENERAL DESCRIPTION OF EUT 5 2.2 DESCRIPTION OF TEST MODES 6 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 7 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 7 2.5 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 7 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 8 3 . EMC EMISSION TEST 9 3.1 CONDUCTED EMISSION MEASUREMENT 9 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 9 3.1.2 TEST PROCEDURE 9 3.1.3 DEVIATION FROM TEST STANDARD 9 3.1.4 TEST SETUP 10 3.1.5 EUT OPERATING CONDITIONS 10 3.1.6 TEST RESULTS 10 3.2 RADIATED EMISSION MEASUREMENT 11 3.2.1 RADIATED EMISSION LIMITS 11 3.2.2 TEST PROCEDURE 12 3.2.3 DEVIATION FROM TEST STANDARD 12 3.2.4 TEST SETUP 12 3.2.5 EUT OPERATING CONDITIONS 13 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 14 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 15 3.2.8 TEST RESULTS (1GHZ~25GHZ) 17 3.3 RADIATED BAND EMISSION MEASUREMENT 18 3.3.1 TEST REQUIREMENT: 18 3.3.2 TEST PROCEDURE 18 3.3.3 DEVIATION FROM TEST STANDARD 18 3.3.4 TEST SETUP 19 3.3.5 EUT OPERATING CONDITIONS 19 4 . BANDWIDTH TEST 21 4.1 APPLIED PROCEDURES / LIMIT 21 4.1.1 TEST PROCEDURE 21 4.1.2 DEVIATION FROM STANDARD 21 4.1.3 TEST SETUP 21 4.1.4 EUT OPERATION CONDITIONS 21 Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20230619044E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 30 Table of Contents Page 4.1.5 TEST RESULTS 22 5 . ANTENNA REQUIREMENT 23 5.1 STANDARD REQUIREMENT 23 5.2 EUT ANTENNA 23 6 . TEST SEUUP PHOTO 24 7 . EUT PHOTO 25 Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20230619044E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 30 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.249) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A 15.205(a), 15.209(a) 15.249(a), 15.249(c) Fundamental &Radiated Spurious Emission Measurement PASS 15.249(d) Band Edge Emission PASS 15.215(c) 20dB Bandwidth PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report 1.1 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2,providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 Conducted Emission Test ±2.56dB 2 RF power,conducted ±0.42dB 3 Spurious emissions,conducted ±2.76dB 4 All emissions,radiated(<1G) ±3.65dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-20230619044E Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 30 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name: Four axis aircraft（DRONE） Trademark N/A Model No.: S162 MTE1088(E88), E68, E88, E98, E58, S32T, S60, S61, S62, S63, S65, S66, S67, S68, S69, S72, S75, S76, S78, S79, S80, S81, S82, S83, S85, S86, S87, S88, S89, S90, S91, S92, S93, S95, S96, S97, S98, S99, S101, S103, S105, S106, S107, S108, S109, S115, S116, S118, S122, S123, S125, S126, S127, S128, S129, S130, S131, S132, S135, S136, S137, S138, S139, S150, S151, S152, S153, S154, S155, S159, S160, S161, S163, S166, S168, S169, S170, S72, 800, 805, 601, 809, 810, 812, 816, 806, YT60, YT61, YT62, YT63, YT65, YT66, YT67, YT68, YT69, YT72, YT75, YT76, YT78, YT79, YT80, YT81, YT82, YT83, YT85, YT86, YT87, YT88, YT89, YT90, YT91, YT92, YT93, YT95, YT96, YT97, YT98, YT99, YT101…

Text truncated - open the document above for the full version.