2BBU7-30014Remote control

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Kingtec Branch (Vietnam) Technologies Co., Ltd. FRN: 0033947805 Grantee code: 2BBU7 FCC ID: 2BBU7-30014 Contact Name: BaofengFang Address: Lot 35, Street 3, Tan Duc Industrial Zone, Duc Hoa Ha Commune, Duc Hoa District, Long An Province, Vietnam Telephone No: 0571-58317207 Fax No: 0571-64184187 Email: [email protected] i. [Kingtec Branch (Vietnam) Technologies Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [ Kingtec Branch (Vietnam) Technologies Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Kingtec Branch (Vietnam) Technologies Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 06.12.2024 Applicant’s Name: BaofengFang Title: General manager assistant Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Kingtec Branch (Vietnam) Technologies Co., Ltd. Address: Lot 35, Street 3, Tan Duc Industrial Zone, Duc Hoa Ha Commune, Duc Hoa District, Long An Province, Vietnam Product Name: Remote control Model Number: 30014 FCC Identifier: 2BBU7-30014 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: BaofengFang Date: 6/12/2024 Title: General manager assistant Signature of applicant:

C5266091_X10_Ed.2 1/1 Kingtec Branch (Vietnam) Technologies Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 6/12/2024 Subject: Request for Confidentiality FCC ID: 2BBU7-30014 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: BaofengFang Title: General manager assistant

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected] Photographs of the EUT (External Photos) Model: 30014 Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected] Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected]

Size:30*23mm

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected] Photographs of the EUT (Internal Photos) Model: 30014 Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected] Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected] ANT

The test report is only used for customer scientific research, teaching, internal quality control and other purposes, and is for internal reference only. Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected] RF EXPOSURE Test Report Report No.: MTi240329011-01E2 Date of issue: 2024-06 -06 Applicant: Kingtec Branch (Vietnam) Technologies Co., Ltd. Product: Remote control Model(s): 30014 FCC ID: 2BBU7-30014 Shenzhen Microtest Co., Ltd. http://www.mtitest.cn - Page 2 of 6- Report No.: MTi240329011-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 6- Report No.: MTi240329011-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Test Result Certification Applicant: Kingtec Branch (Vietnam) Technologies Co., Ltd. Address: Lot 35, Street 3, Tan Duc Industrial Zone, Duc Hoa Ha Commune, Duc Hoa District, Long An Province, Vietnam Manufacturer: Kingtec Branch (Vietnam) Technologies Co., Ltd. Address: Lot 35, Street 3, Tan Duc Industrial Zone, Duc Hoa Ha Commune, Duc Hoa District, Long An Province, Vietnam Product description Product name: Remote control Trademark: prime Model name: 30014 Series Model: N/A Standards: N/A Test method: KDB 447498 D01 v06 Date of Test Date of test: 2024-05 -23 to 2024-06 -03 Test result: Pass Test Engineer : (Yanice.Xie) Reviewed By : (David Lee) Approved By : (Leon Chen) - Page 4 of 6- Report No.: MTi240329011-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Table of Contents 1. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS ............................................................................................ 5 2. SAR TEST EXCLUCSION THRESHOLDS ........................................................................................................................ 6 - Page 5 of 6- Report No.: MTi240329011-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] 1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance defined in 4.1 f) is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified, typically in the SAR measurement or SAR analysis report, by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting are required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions. a) For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f (GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison  The values 3.0 and 7.5 are referred to as numeric thresholds in step b) below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm, and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test exclusion. b) For 100 MHz to 6 GHz and test separation distances > 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following (also illustrated in Appendix B): 1) {[Power allowed at numeri…

Text truncated - open the document above for the full version.

ANTENNAREPORT Manufacture：HangzhouKaite ElectricalApplianceCo.,Ltd. ProductName：30014 AntennaAntennaType：PCB Test Date：2022.03.18 Testedby：Sam Approvedby：Terry 1.Referenceand Address Manufacturer HangzhouK a i t e ElectricalApplianceCo., L t d . A d d r e s s SANDUINDUSTRIALZONE,JIANDE CITY, ZHEJIANGPROVINCE311605 T e s t Location Room 106, Building3,L e t o n gScience P a r k , N o . 500, Qiuyi Road, BinjiangDistrict,Hangzhou ProductN a m e30014 Antenna Productmodel30014 AntennaT y p eP C B Antenna T e s t ItemsG a i n ; Efficiency;RadiationP a t t e r n T e s t Frequency2400-2500MHz T e s t StandardANSI/IEEES t d 149-1979 2.AntennaSpecification 2.1 AntennaP h o t o & L e n g t h(mm) 2.2AppendixB S11/VSWR Frequency 2400MHz2450 MHz2500MHz ReturnLoss-8.75 -11.72-11.22 VSWR2.15 1.721.76 2.3 GainandEfficiency Frequency(MHz) Efficiency(%) Gain(dBi) 2400 24.35 -1.1 241025.31 -0.56 2420 24.11 -0.37 2430 22.42 -0.33 2440 27.93 0.07 2450 26.91 0.11 2460 25.82 -0.25 2470 26.75 -0.36 2480 21.46 -1.13 2490 20.67 -1.17 2500 21.25 -0.14 2.4RadiationPattern 2DdrawingsareprovidedbyDongguanUBElectronicCO.,LTD

The test report is only used for customer scientific research, teaching, internal quality control and other purposes, and is for internal reference only. Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected] Test Report Report No.: MTi240329011-01E1 Date of issue: 2024-06-06 Applicant: Kingtec Branch (Vietnam) Technologies Co., Ltd. Product: Remote control Model(s): 30014 FCC ID: 2BBU7-30014 Shenzhen Microtest Co., Ltd. http://www.mtitest.cn Page 2 of 45 Report No.: MTi240329011-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 45 Report No.: MTi240329011-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected] Table of contents 1 General Description ......................................................................................................................... 5 1.1 Description of the EUT ............................................................................................................................... 5 1.2 Description of test modes .......................................................................................................................... 5 1.3 Environmental Conditions .......................................................................................................................... 7 1.4 Description of support units ....................................................................................................................... 7 1.5 Measurement uncertainty .......................................................................................................................... 7 2 Summary of Test Result .................................................................................................................. 8 3 Test Facilities and accreditations ................................................................................................... 9 3.1 Test laboratory ........................................................................................................................................... 9 4 List of test equipment .................................................................................................................... 10 5 Evaluation Results (Evaluation) .................................................................................................... 11 5.1 Antenna requirement ............................................................................................................................... 11 6 Radio Spectrum Matter Test Results (RF) .................................................................................... 12 6.1 Occupied Bandwidth ................................................................................................................................ 12 6.2 Maximum Conducted Output Power ........................................................................................................ 13 6.3 Power Spectral Density ........................................................................................................................... 14 6.4 RF conducted spurious emissions and band edge measurement .......................................................... 15 6.5 Band edge emissions (Radiated) ............................................................................................................ 16 6.6 Radiated emissions (below 1GHz) .......................................................................................................... 19 6.7 Radiated emissions (above 1GHz) .......................................................................................................... 23 Photographs of the test setup ............................................................................................................. 30 Photographs of the EUT....................................................................................................................... 31 Appendix A: DTS Bandwidth ............................................................................................................... 33 Appendix B: Maximum conducted output power ............................................................................... 35 Appendix C: Maximum power spectral density .................................................................................. 37 Appendix D: Band edge measurements ............................................................................................. 39 Appendix E: Conducted Spurious Emission ...................................................................................... 40 Appendix F: Duty Cycle ....................................................................................................................... 43 Page 4 of 45 Report No.: MTi240329011-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : w…

Text truncated - open the document above for the full version.

Page 1 of 1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (8 6-755)88850135 Fax: (86-755) 88850136 We b : www.mtitest.cn E-mail: [email protected] Photographs of the test setup Model: 30014 Radiated emissions (below 1GHz) Radiated emissions (above 1GHz)