2BBUK-FLIPPERHTS100Flipper Handheld

* All data in this manual refers to all genders equally Flipper TS Series / User Manual August 2024 / Ver 2.0 COMMCRETE Flipper User Manual August 2024 2 Contents Introduction ............................................................................................................... 3 General ................................................................................................................... 3 Flipper™ .................................................................................................................. 3 Tactical communication over GEO satellites ............................................................ 3 Safety Statement ........................................................................................................ 4 General ................................................................................................................... 4 DC Power ................................................................................................................. 4 Water resistance ..................................................................................................... 4 Standards ................................................................................................................ 4 FCC Interference Statement HTS-100 ....................................................................... 5 FCC Modification Warning Statement HTS-100 ....................................................... 5 FCC RF Exposure Warning - SAR HTS-100 ................................................................. 5 Flipper Overview ........................................................................................................ 7 System architecture ................................................................................................. 7 Main Features ......................................................................................................... 7 Flipper Formations ..................................................................................................... 8 HTS-100 (Handheld) ................................................................................................ 8 VTS-300 – Vehicle / MTS-400 – Maritime ................................................................ 9 VTS-301 – Headquarters (Long distances) ............................................................... 9 ATS-500 - Aeronautical ............................................................................................ 9 Operation ................................................................................................................. 12 HTS-100 ................................................................................................................. 12 VTS-300 ................................................................................................................. 14 VTS-301 Headquarters Flipper ............................................................................... 15 Technical Specification ............................................................................................. 18 Model Info Table ................................................................................................... 18 Flipper Kits............................................................................................................. 18 Flipper Band Support ............................................................................................. 19 Flipper CMD........................................................................................................... 20 Customer service & support ..................................................................................... 21 Flipper User Manual August 2024 3 Introduction General First responders & Military often work in harsh environment, relying on robust portable radios to provide all-informed C4I (Communication for Command, Control, Coordination & Intelligence) of dispersed forces. However, when operational distances extend beyond line of sight, VHF/UHF radios run out of range, unable to meet the requirements. Using terrestrial repeaters or relay stations has its own disadvantages when disaster occur. Deployment of mobile repeaters results in insufficient coverage and lots of logistics. Furthermore, disasters such as Earthquakes, Wildfires and Floods rule out the ability of terrestrial deployment. Flipper™ Flipper by Commcrete is a very small form factor satellite communication module. It turns any line of site tactical radio of all bands (Military and Commercial VHF, Military and Commercial UHF, including the 700/800 & 900MHz bands) to a tactical satellite radio. Small, Rugged, Agile & Multi Band Flexibility make Flipper the right solution for rescuers and first responders. Whether you’re Law Enforcement, Firefighter or Military, adding Flipper to your radio, immediately connects you to the network regardless of geographic boundaries. The size of Flipper combined with a small omni directional antenna, makes it the ultimate Comms-On-The-Move (COTM) product for various scenarios. Tactical communication over GEO satellites Flipper™ complies with L-Band tactical services by GEO satellite companies, making it invincible in size and performance. Therefore, the integration of Flipper and Customer Radio excels in every parameter, both for Voice & Data. Flipper User Manual August 2024 4 Safety Statement General This safety statement is provided for Flipper™ End Users. These safety notes should be used in conjunction with regional regulations. This equipment is not suitable for use in locations where children are likely to be present. For all mobile versions (VTS-300, VTS-301, MTS-400, ATS-500): if the equipment is intended to be fastened in place, the instructions shall explain how to securely fasten the equipment. The Flipper consists of RF unit and antenna attached to it.  The RF unit enables conventional PTT Line-of-Sight commercial or military radi…

Text truncated - open the document above for the full version.

Covered list Attestation Statement Date: December 31, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BBUK-FLIPPERHTS100 Commcrete ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signature: Michael Mor Contact Name: Commcrete ltd Email: [email protected]

Covered list Attestation Statement Date: December 31, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BBUK-FLIPPERHTS100 Commcrete ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Michael Mor Contact Name: Michael Mor Email: [email protected]

Confidential Request Letter Date: August 7, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for confidentiality FCC ID: 2BBUK-FLIPPERHTS100 Long-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Tune-up procedure Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Short-Term Confidentiality (STC) Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Internal Photos User’s Manual External Photos Test Set-up Photos Justification: Planned Release Date STC: If no date is given, 180 days from grant date will be used. Sincerely, Signature: Michael Mor Contact Name: Michael Mor Email: [email protected]

Authorization Letter Date: December 31, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: 2BBUK-FLIPPERHTS100 To Whom It May Concern: We, Commcrete ltd the undersigned, hereby authorize the following person on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by DEKRA Testing and Certification Co., Ltd. on our behalf shall have the same effect as acts of our own. Agent Company name : DEKRA Testing and Certification Co., Ltd. Address : No. 26, Huaya 1st Road, Guishan District, Taoyuan City 33341, Taiwan Contact Name : Stanley Wu Email : [email protected] We are therefore responsible for the contents of the application. Product description : Flipper Handheld Model No. : HTS-100 Brand : Commcrete Sincerely, Signature Michael Mor Contact Name: Commcrete ltd Email: [email protected]

Report No.: 23C0129R-Product Photos Page: 1 of 9 (1) EUT Photo (2) EUT Photo Report No.: 23C0129R-Product Photos Page: 2 of 9 (3) EUT Photo (4) EUT Photo Report No.: 23C0129R-Product Photos Page: 3 of 9 (5) EUT Photo (6) EUT Photo Report No.: 23C0129R-Product Photos Page: 4 of 9 (7) EUT Photo (8) EUT Photo Report No.: 23C0129R-Product Photos Page: 5 of 9 (9) EUT Photo (10) EUT Photo RF Antenna

FLIPPER BY COMMC RETE ANTRADIO HTS -100 Guidelines: 1.Front coverasshown(details) 2.Rearc overasshown(clear). 3.Effectivear ea: H70mmX W40 mm 4.Labeling w ill be printed directlyonthe frontcover(not bya sticker). 5.S/N al readymarkedoneachuniton thesideofit. 6.TheF lipperdoesnot haveMAC address(this is notanIPnetwork product). 7.PicturesofF lipperare attached as an example. FCC ID: 2BBUK-FLIPPERHTS100 Power 7- 14VDC

Report No.: 23C0129R-Product Photos Page: 6 of 9 (11) EUT Photo (12) EUT Photo Report No.: 23C0129R-Product Photos Page: 7 of 9 (13) EUT Photo (14) EUT Photo Report No.: 23C0129R-Product Photos Page: 8 of 9 (15) EUT Photo (16) EUT Photo RF Chip Report No.: 23C0129R-Product Photos Page: 9 of 9 (17) EUT Photo

Report No.: 23C0129R-SAUSV01S-A Page: 1 of 24 Test report No.: 23C0129R-SAUSV01S-A SAR Test Report Product Name Flipper Handheld Trademark Commcrete Model and /or type reference HTS-100 Applicant ́s name / address Commcrete ltd Shaked 11, Shoham7319900, Israel Manufacturer ́s name Commcrete ltd FCC ID 2BBUK-FLIPPERHTS100 Applicable Standard IEEE 1528-2013 KDB 447498 D01 v06 KDB 865664 D01 v01r04 Test Result Max. SAR Measurement (1g) 1.64 GHz: 1.083 W/kg Verdict Summary IN COMPLIANCE Documented By (Supervisor / Jinn Chen) Te s t e d B y (Senior Engineer / Luke Cheng) Approved By (Assistant Manager / San Lin) Date of Receipt 2023/12/05 Date of Issue 2024/08/06 Report Version V1.0 Report No.: 23C0129R-SAUSV01S-A Page: 2 of 24 INDEX Page 1. General Information ........................................................................................................ 5 1.1 EUT Description ................................................................................................. 5 1.2 Antenna List ....................................................................................................... 5 1.3 Test Environment ................................................................................................ 6 1.4 Measurement procedures................................................................................... 7 2. SAR Measurement System ............................................................................................. 8 2.1 DASY System Description .................................................................................. 8 2.2 Area Scans ......................................................................................................... 9 2.3 DASY E-Field Probe ......................................................................................... 10 2.4 DATA Acquisition Electronics (DAE) and Measurement Server ........................ 11 2.5 Robot ................................................................................................................ 12 2.6 Device Holder ................................................................................................... 12 2.7 Phantom ........................................................................................................... 13 3. Tissue Simulating Liquid .............................................................................................. 14 3.1 The composition of the tissue simulating liquid ................................................ 14 3.2 Tissue Calibration Result .................................................................................. 14 3.3 Tissue Dielectric Parameters for Phantoms ..................................................... 15 4. Measurement Procedure ............................................................................................... 16 4.1 SAR System Check .......................................................................................... 16 4.2 SAR Measurement Procedure .......................................................................... 17 5. RF Exposure Limits ....................................................................................................... 18 6. Test Equipment List ...................................................................................................... 19 7. Measurement Uncertainty ............................................................................................. 21 8. Conducted Power Measurement (Including tolerance allowed for production unit) ................................................................................................................................ 22 9. Test Results ................................................................................................................... 23 9.1 Test Results Summary ..................................................................................... 23 Appendix A. System Check Data Appendix B. Highest measurement Data Appendix C. Test Setup Photographs Appendix D. Probe Calibration Data Appendix E. Dipole & Source Calibration Appendix F. Product Photos-Please refer to the file: 23C0129R-Product Photos Report No.: 23C0129R-SAUSV01S-A Page: 3 of 24 Competences and Guarantees DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. General conditions 1. The test results relate only to the samples tested. 2. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. 3. This report must not be used to claim product endorsement by TAF or any agency of the government. 4. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. 5. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for e…

Text truncated - open the document above for the full version.

Appendix E. Dipole & Source Calibration

Appendix D. Probe Calibration

Report No.: 23C0129R-SAUSV01S-A Page: 1 of 2 Appendix B. Highest Measurement Data Report No.: 23C0129R-SAUSV01S-A Page: 2 of 2 Test Laboratory: DEKRA Date: 2024/06/25 1_1.64GHz_GMSK_F1_Position 1_25mm_ANT Main_BP-272 DUT: Flipper Handheld; Type: HTS-100 Communication System: UID 0, Satelite; Frequency: 1626.5 MHz Communication System PAR: 0 dB Medium parameters used: f = 1626.5 MHz; σ = 1.28 S/m; ε r = 40.32; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration:  Probe: EX3DV4 - SN7631; ConvF(8.76, 8.76, 8.76) @ 1626.5 MHz; Calibrated: 2024/02/21  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1651; Calibrated: 2024/02/15  Phantom: Twin-SAM V8.0; Type: QD 000 P41 AA; Serial: 2030  Measurement SW: DASY52, Version 52.10 (4); Configuration/Flat/Area Scan (11x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.12 W/kg Configuration/Flat/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 31.06 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 1.19 W/kg SAR(1 g) = 0.792 W/kg; SAR(10 g) = 0.536 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid (> 16 mm) Ratio of SAR at M2 to SAR at M1 = 65.7% Maximum value of SAR (measured) = 1.05 W/kg

Report No.: 23C0129R-SAUSV01S-A Page: 1 of 2 Appendix A. System Check Data Report No.: 23C0129R-SAUSV01S-A Page: 2 of 2 Test Laboratory: DEKRA Date: 2024/06/25 System Performance Check_1640MHz-Head DUT: D1640V2; Type: D1640V2 Communication System: UID 0, CW; Frequency: 1640 MHz Communication System PAR: 0 dB Medium parameters used: f = 1640 MHz; σ = 1.29 S/m; ε r = 40.23; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011) DASY Configuration:  Probe: EX3DV4 - SN7631; ConvF(8.76, 8.76, 8.76) @ 1640 MHz; Calibrated: 2024/02/21  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1651; Calibrated: 2024/02/15  Phantom: Twin-SAM V8.0; Type: QD 000 P41 AA; Serial: 2030  Measurement SW: DASY52, Version 52.10 (4); Configuration/1640MHz Head/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 10.4 W/kg Configuration/1640MHz Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 97.62 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 15.1 W/kg SAR(1 g) = 8.17 W/kg; SAR(10 g) = 4.5 W/kg Smallest distance from peaks to all points 3 dB below = 10.7 mm Ratio of SAR at M2 to SAR at M1 = 56.5% Maximum value of SAR (measured) = 12.3 W/kg

Report No.：23C0129R-RFUSV15S-A Page : 1 of 20 Test Report No: 23C0129R-RFUSV15S-A TEST REPORT FCC Rules&Regulations Product Name Flipper Handheld Brand Name Commcrete Model No. HTS-100 FCC ID 2BBUK-FLIPPERHTS100 Applicant ́s Name / Address Commcrete ltd Shaked 11, Shoham7319900, Israel Manufacturer’s Name Commcrete ltd Test Standard FCC CFR Title 47 Part 25 Verdict Summary IN COMPLIANCE Documented By Jinn Chen Tested by Ivan Chuang Approved By Alan Chen Date of Receipt 2023/12/05 Date of Issue 2024/08/06 Report Version V1.0 Report No.：23C0129R-RFUSV15S-A Page : 2 of 20 INDEX page Competences and Guarantees ............................................................................................................................... 4 General Conditions ................................................................................................................................................. 4 Revision History ...................................................................................................................................................... 5 Summary of Test Result .......................................................................................................................................... 6 Comments and Remarks ........................................................................................................................................ 7 1. General Information ................................................................................................................................. 8 1.1. EUT Description ...................................................................................................................................... 8 1.2. EUT Information ...................................................................................................................................... 9 1.3. Testing Location Information ................................................................................................................... 9 1.4. Measurement Uncertainty ..................................................................................................................... 10 1.5. List of Test Equipment ........................................................................................................................... 11 2. Test Configuration of EUT ..................................................................................................................... 12 2.1. Test Condition ....................................................................................................................................... 12 2.2. Test Frequency Mode ........................................................................................................................... 12 2.3. The Worst Case Measurement Configuration ...................................................................................... 12 2.4. Tested System Details .......................................................................................................................... 13 2.5. Configuration of Tested System ............................................................................................................ 13 2.6. EUT Operating Procedures ................................................................................................................... 13 3. RF Output Power ................................................................................................................................... 14 3.1. Test Setup ............................................................................................................................................. 14 3.2. Limit ....................................................................................................................................................... 14 3.3. Test Procedure ...................................................................................................................................... 14 3.4. Test Result of RF Output Power ........................................................................................................... 14 4. Occupied Bandwidth ............................................................................................................................. 15 4.1. Test Setup ............................................................................................................................................. 15 4.2. Limit ....................................................................................................................................................... 15 4.3. Test Procedures .................................................................................................................................... 15 4.4. Test Result of Occupied Bandwidth ...................................................................................................... 15 5. Spurious Emissions at Antenna Terminals (conducted emissions) ....................................................... 16 5.1. Test Setup ............................................................................................................................................. 16 5.2. Limit ....................................................................................................................................................... 16 5.3. Test Procedure ...................................................................................................................................... 16 5.4. Test Result of Spurious Emissions at Antenna Terminals (conducted emissions) ............................... 16 6. Spurious Emission (radiated emission) ................................................................................................. 17 6.1. Test Setup ............................................................................................................................................. 17 6.2. Limit ..............…

Text truncated - open the document above for the full version.

Report No.: 23C0129R-RFUSV15S-A Page : 1 of 17 Appendix A. Test Result of RF Output Power Measured values of RF Power Output (measured with Spectrum Analyzer in any 4kHz band) Channel (MHz) Conduted output power (dBm) Antenna gain (dBi) EIRP (dBm/4kHz) 1626.50 32.36 0 32.36 1660.50 29.20 0 29.20 Note: 1. EIRP(dBm)= Conducted output power (dBm)+ Antenna gain(dBi) 2. The insertion loss (external attenuator / RF cable assembly) and bandwidth correction factor (1.25 dB, when RBW 3 kHz was used) were included in the spectrum analyzer as the Offset. Measured values of Total power Channel (MHz) Conduted output power (dBm) Antenna gain (dBi) EIRP (dBm) 1626.50 31.64 0 31.64 1660.50 28.53 0 28.53 Note: EIRP(dBm)= Conducted output power (dBm)+ Antenna gain(dBi) Report No.: 23C0129R-RFUSV15S-A Page : 2 of 17 RF Power Output (measured with Spectrum Analyzer in any 4kHz band) Channel:1626.50 MHz Channel: 1660.50 MHz Note: The insertion loss (external attenuator / RF cable assembly) and bandwidth correction factor (1.25 dB, when RBW 3 kHz was used) were included in the spectrum analyzer as the Offset. Report No.: 23C0129R-RFUSV15S-A Page : 3 of 17 Total power Channel:1626.50 MHz Channel: 1660.50 MHz Report No.: 23C0129R-RFUSV15S-A Page : 4 of 17 Appendix B. Test Result of Occupied Bandwidth Channel (MHz) Occuiped Bandwidth (kHz) 1626.50 4.681 1660.50 4.698 Report No.: 23C0129R-RFUSV15S-A Page : 5 of 17 Channel:1626.50 MHz Channel: 1660.50 MHz Report No.: 23C0129R-RFUSV15S-A Page : 6 of 17 Appendix C. Test Result of Spurious Emissions at Antenna Terminals (Conducted emissions) Within 250 percent of the authorized bandwidth (authorized bandwidth= 12.5kHz) Channel:1626.50 MHz Channel: 1660.50 MHz Note: The insertion loss (external attenuator / RF cable assembly) and bandwidth correction factor (1.25 dB, when RBW 3 kHz was used) were included in the spectrum analyzer as the Offset. Report No.: 23C0129R-RFUSV15S-A Page : 7 of 17 More than 250 percent of the authorized bandwidth (authorized bandwidth= 12.5kHz) Channel:1626.50 MHz (30MHz~1GHz) Channel:1626.50 MHz (1GHz~3GHz) Channel:1626.50 MHz (3GHz~18GHz) Report No.: 23C0129R-RFUSV15S-A Page : 8 of 17 Channel:1660.50 MHz (30MHz~1GHz) Channel:1660.50 MHz (1GHz~3GHz) Channel:1660.50 MHz (3GHz~18GHz) Report No.: 23C0129R-RFUSV15S-A Page : 9 of 17 Appendix D. Test Result of Spurious Emission (radiated emission) Report No.: 23C0129R-RFUSV15S-A Page : 10 of 17 Report No.: 23C0129R-RFUSV15S-A Page : 11 of 17 Appendix E. Test Result of Limits on emissions from mobile earth stations for protection of aeronautical radio navigation satellite service / Carrier-off state emissions (conducted emissions) Conducted emissions from 1605 MHz to 1610 MHz Emission limits (PSD in 1MHz) Test Channel (MHz) Measurement Frequency (dBm) Emission Level (dBm) Margin (dB) Limit (dBm) 1626.50 1609.414 -40.28 -21.47 -18.81 1660.50 1602.332 -40.51 -0.51 -40.00 1609.975 -21.30 -5.18 -16.12 Channel:1626.50 MHz Channel: 1660.50 MHz Report No.: 23C0129R-RFUSV15S-A Page : 12 of 17 Emission limits (PSD in 100 kHz) Test Channel (MHz) Measurement Frequency (dBm) Emission Level (dBm) Margin (dB) Limit (dBm) 1626.50 1609.261 -55.63 -36.08 -19.55 1660.50 1602.485 -50.80 -0.80 -50.00 Channel:1626.50 MHz Channel: 1660.50 MHz Report No.: 23C0129R-RFUSV15S-A Page : 13 of 17 Conducted emissions from 1559 MHz to 1610 MHz (carrier-off state emissions) Emission limits (carrier-off) State Measurement Frequency (dBm) Emission Level (dBm) Margin (dB) Limit (dBm) Carrier-off 1609.363 -61.88 -11.88 -50 Carrier-off Report No.: 23C0129R-RFUSV15S-A Page : 14 of 17 Appendix F. Test Result of Frequency Stability Temperature Variations Temperature (°C) Voltage (V) Observe Time Declared Frequency (MHz) Read Frequency (MHz) Tolerance (%) Limit (%) 50 7.2 start 1626.5 1626.49942 0.00004 0.001 2mins 1626.5 1626.49957 0.00003 5mins 1626.5 1626.49957 0.00003 10mins 1626.5 1626.49957 0.00003 40 7.2 start 1626.5 1626.49949 0.00003 0.001 2mins 1626.5 1626.49949 0.00003 5mins 1626.5 1626.49957 0.00003 10mins 1626.5 1626.49957 0.00003 30 7.2 start 1626.5 1626.49949 0.00003 0.001 2mins 1626.5 1626.49971 0.00002 5mins 1626.5 1626.49978 0.00001 10mins 1626.5 1626.49957 0.00003 10 7.2 start 1626.5 1626.49942 0.00004 0.001 2mins 1626.5 1626.49957 0.00003 5mins 1626.5 1626.49964 0.00002 10mins 1626.5 1626.49964 0.00002 0 7.2 start 1626.5 1626.49957 0.00003 0.001 2mins 1626.5 1626.49964 0.00002 5mins 1626.5 1626.49957 0.00003 10mins 1626.5 1626.49971 0.00002 -10 7.2 start 1626.5 1626.49964 0.00002 0.001 2mins 1626.5 1626.49964 0.00002 5mins 1626.5 1626.49964 0.00002 10mins 1626.5 1626.49964 0.00002 -20 7.2 start 1626.5 1626.49971 …

Text truncated - open the document above for the full version.