2BBVCUAP3E-cigarette

2 1 Low Liquid Indications Vuse Ultra Smart Pods come with a useful feature that estimates how much liquid is left. Error Indications In some overheating cases, the QR code error screen and the error number will also be followed by a lock icon, and a countdown timer indicating when the Vuse Ultra device can be used again. Once the Vuse Ultra device is ready to vape, it will unlock automatically. Tip: Please note that you can still navigate through the menu during the cool down period. DOWNLOAD THE MYVUSE APP TO ENJOY A MORE PERSONALIZED VAPING EXPERIENCE WITH APP FEATURES SUCH AS: Device Lock The MyVuse App gives you options to lock your Vuse Ultra device so no one but you has access. 1.Manual Lock: Allows you to lock and unlock your Vuse Ultra device with a swipe on the home screen. 2.Auto-Lock: Allows you to set a countdown timer that will automatically lock your Vuse Ultra device. The timer starts once your Vuse Ultra device goes out of Bluetooth® range. MyVuse App 0% Liquid Level Insert Pod Animation 20% Liquid Level 10% Liquid Level Error QR Code and Error Number Example LockCool Down Timer Unlock If an error occurs with your Vuse Ultra device it will vibrate 3 times and display one of the error screens shown below, followed by a QR code and an error number. Scan the QR code for more instructions via the App. You can also call the Customer Care Team at 1-877-614-VUSE. Check for correctly inserted battery Battery is too hot or too cold Problem with charging Problem with puff Sensor Problem with Bluetooth® connection Error QR Code and Error Number Example Problem with pod connection or damaged pod Important Product Information • Vuse Ultra device is IPX4 rated, making it splash resistant to water. • If water droplets get on Vuse Ultra device, gently dry it with a piece of cloth. • If Vuse Ultra device becomes fully wet or immersed in water, do not use. If this occurs, please contact the Customer Care Team at 1-877-614-VUSE. • Be aware of the risk of the Vuse Ultra device terminals being short-circuited by a foreign object. The Vuse Ultra device has an overvoltage, overcurrent, and a short-circuit protection function. • When puffed, if a short circuit is detected, the screen will display an error icon and the Vuse Ultra device will cut the power to the Vuse pod and the vapor production will stop. • Rated input for charging cable: 5VDC, 2.0A. Important Product Information • This product should only be connected to a safety extra-low voltage (SELV) circuit rated at 5VDC, 2.0A. Using an AC adapter with a current output lower than this will result in a slower charge time. • This product is not intended for use by persons with reduced sensory, physical, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. • If you have any questions about the use of your Vuse Ultra device or any other Vuse products, please contact the Vuse Customer Care Team at: 1-877-614-VUSE Regulatory Compliance Information If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Visit vuse.com/faqs for additional product information prior to use. Regulatory Compliance InformationRegulatory Compliance Information FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Made in China ©RJRVC, Winston-Salem, NC 27102, USA 1-877-614-VUSE VAPOR PRODUCTS Underage Sale Prohibited Sale Only Allowed In The United States Pat. vuse.com/patents FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by RJRVC is under license. Other trademarks and trade names are those of their respective owners. Disposal • Do not dispose of the Vuse Ultra device in regular household waste or in a fire. • Do not litter. Contact your local waste management authority to find out how to dispose of your Vuse Ultra device, battery and Vuse pods properly in your area. • If you notice any leaking coming from the Vuse Ultra device, stop using immediately. Avoid the liquid and dispose of your Vuse Ultra device properly. Disposal This product contains a lithium-ion battery. Remove battery only for disposal and recycling. Step 1. Slide the battery release switch towards the charging port. Step 2. Slide the battery out of …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 8 Appendix External Photos for GZCR2606001122HS SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 8 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 5 of 8 Copied from GZCR2410001196Hz SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 6 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 7 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 8 of 8 - End of the Appendix -

5.0V2.0A FCC ID: 2BBVCUAP3 XXXXX UAPVU001 • Die measurements are in millimeters. • UPC is correct. However, printer must adjust bar widths for their process and assure printability and character readability. • This print is to be used for position only. It is not to be used for photographic purposes. • Colors used on this print are not accurate. They represent a best effort to approach actual colors. 75124876 Vuse Ultra Device - Generic DRAWING & ISSUE DATE — DRAWING DESCRIPTION — MATERIAL — REFERENCE ART — COLOR STANDARD — PROJECT # — ART PRODUCTION DATE — FILE NAME — Vuse Ultra Device xxx N/A 7798904 08-26-24 75124876 VuseUltra Device-Gen Designer: RJD WARNING INFO: ADDITIONAL INFO: **MOST CONFIDENTIAL INFORMATION** 401 N. Main Street, Winston-Salem, NC 27102 336-369-4700 Pad PrintedIn-Mold Deboss 0.15mm FILE SUBMITTED 05-29-25 Laser Etched Center Line 2.50 16.50 Center Line 19.23 2.50 46.45 45.4416.18 69.70 9.56 7.94 1.13 7.61 RMP# 207736 1.3 mm 1.3 mm 1.3 mm 1.3 mm 3.0 mm 5.0 mm 5.0V2.0A FCC ID: 2BBVCUAP3 XXXXX UAPVU001

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 15 Appendix Internal Photos for GZCR2606001122HS SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 15 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 15 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 15 WPC Rx ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 5 of 15 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 6 of 15 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 7 of 15 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 8 of 15 BT ANT (SPEED) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 9 of 15 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 10 of 15 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 11 of 15 Copied from GZCR2410001196Hz SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 12 of 15 WPC Rx ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 13 of 15 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 14 of 15 BT ANT (Sunway) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 15 of 15 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR260600112204 Page: 1 of 8 FCC ID: 2BBVCUAP3 RF EXPOSURE EVALUATION REPORT Application No.: GZCR2606001122HS Applicant:R. J. Reynolds Vapor Company Address of Applicant:P.O. Box 906 401 N. Main St., Winston-Salem, North Carolina. 27102. United States Manufacturer:Nicoventures Trading Ltd. Address of Manufacturer:Globe House, 1 Water Street, London, WC2R 3LA, United Kingdom Factory:1. Shenzhen Smoore Technology Limited Qixing Branch 2. Shenzhen Smoore Technology Limited Songgang Branch 3. Shenzhen Smoore Technology Limited Guangming Branch 4. Jiangmen Moore Technology Co.,Ltd 5. Dongguan Smoore Technology Limited 6. PT Smoore Technology Indonesia Address of Factory:1. No.6 songgang Avenue, Tantou Community, Songgang Street, Bao 'an, Shenzhen, Guangdong, China 2. No. 101,102,103, No.2, Datianyang South 2nd Road, Dongfang Community, Songgang Street, Bao’an, Shenzhen, Guangdong, China 3. No. 101, 201, 301, Building1, Hemao Optoelectronic Science and Technology Park Workshop (Phase I), High tech industrial park, Tangjia Community, Fenghuang Street, Guangming, Shenzhen, Guangdong, China 4. No.1 workshop and No. 2 workshop, Industrial Accelerator Park, No. 333 Nanshan Road, Jianghai, Jiangmen, Guangdong, China 5. 14&15, Fuxing Road, Chang’an Town, Dongguan, Guangdong, China 6. JI. Perusahaan No. 46, Banjararum, Singosari, Malang, Jawa Timur, Indonesia Product Name:E-cigarette Model No.: V8810, UAPVU002, UAPVU001   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark:Vuse Standard(s) : KDB 447498 D01 V06 Date of Receipt: 2026-06-09 Date of Evaluation: 2026-06-09 to 2026-07-02 Date of Issue: 2026-07-14 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR260600112204 Page: 2 of 8 Revision Record VersionReport No.DateRemark 01GZCR2606001122042026-07-14Original Authorized for issue by: Jim Li/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR260600112204 Page: 3 of 8 2Evaluation Summary ItemStandardMethodRequirementResult RF Exposure KDB 447498 D01 V06 KDB 447498 D01 V06KDB 447498 D01 V06Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. Model: V8810, UAPVU002, UAPVU001 According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, only different on the model name. There were two configures for all modes with some different components and BT antenna as below: BT AntennaManufactureMaximum antenna gain Configure 1 SHENZHEN SUNWAY COMMUNICATION CO., LTD. -0.02 dBi Configure 2 SPEED Communication Technology Limited 0.78 dBi Considering the above difference, evaluation was performed to model V8810 in this report GZCR260600112204. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR260600112204 Page: 4 of 8 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................6 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5Technical Requirements Specification..................................................................................................7 5.1General Description of Applied Standards........................................................................................7 5.2RF Exposure Evaluation....................................................................................................................7 5.2.1Limit & Test Method......................................................................................................................7 5.2.2Conclusion....................................................................................................................................7 6EUT Constructional Details (EUT Photos).............................................................................................8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR260600112204 Page: 5 of 8 4General Information 4.1Details of E.U.T. Power supply:DC 3.7 V powered by built-in battery DC 5 V for charging Cable(s):Type C charging ports with 0.2m unshielded cables Operation Frequency:2402MHz to 2480MHz Modulation Type:GFSK Number of Channels:40 Channel Spacing:2MHz Antenna Type:Integral Antenna Antenna Gain: …

Text truncated - open the document above for the full version.

Antenna Specifications SHENZHEN SUNWAY COMMUNICATION CO., LTD. The information contained in this product is of proprietary nature. It may not be reproduced without expressed written permission of Shenzhen Sunway Communication Co. Ltd., Building 9, Changxing High-tech Industrial Park, Wan’an Road, Shajing Town, Bao’an District, ShenZhen, P.R.China, zip 518104, Tel. +86-755-81773388, Fax +86-755-81773335 www.sz-sunway.com 1 MIMOSA Bluetooth Antenna Revision History Part Number 1100023240 Description Engineering Requirements Specification for MIMOSA Bluetooth antenna Initiated by Sunway Development Team Revision Description Authored by Date Notes 01 MIMOSA Bluetooth Antenna Specification Yangfulong; Zikang wang; 6/14/2024 Initial version 02 MIMOSA Bluetooth Antenna Specification Yangfulong; Zikang wang; 6/21/2024 Updated better functional data (A2 Pattern) 03 MIMOSA Bluetooth Antenna Specification Yangfulong; Zikang wang; 6/25/2024 Updated Antenna Electrical Requirement and packing (A2 Pattern) 04 MIMOSA Bluetooth Antenna specification Yangfulong; Zikang wang; 6/26/2024 Updated FPC Layout.(A2 Pattern) 05 MIMOSA Bluetooth Antenna specification Yangfulong; Zikang wang; 7/26/2024 POC2 updated B1 version pattern to adjust frequency offset 06 MIMOSA Bluetooth Antenna specification Yangfulong; Zikang wang; 8/21/2024 POA updated to C12 version pattern to improve passive efficiency 07 MIMOSA Bluetooth Antenna specification Yangfulong; Lidaoyong; 10/17/2024 1.Update BT antenna Electrical Requirements 1.1_ASM information 2.Add Antenna 2D radiation direction diagram. Antenna Specifications SHENZHEN SUNWAY COMMUNICATION CO., LTD. The information contained in this product is of proprietary nature. It may not be reproduced without expressed written permission of Shenzhen Sunway Communication Co. Ltd., Building 9, Changxing High-tech Industrial Park, Wan’an Road, Shajing Town, Bao’an District, ShenZhen, P.R.China, zip 518104, Tel. +86-755-81773388, Fax +86-755-81773335 www.sz-sunway.com 2 08 MIMOSA Bluetooth Antenna specification Yangfulong; Lidaoyong; 11/15/2024 1.Update the release film shape 09 MIMOSA Bluetooth Antenna specification Yangfulong; Lidaoyong; 12/11/2024 1.Update the Film package 10 MIMOSA Bluetooth Antenna specification Yangfulong; Lidaoyong; 03/02/2026 1.Update the PN information on Page 10 MIMOSA Bluetooth Antenna BUILD LEVEL: SP 1. Electrical Requirements 3 1.1 Bottom Antenna Electrical Requirements 2. Bluetooth Antenna Test Setup 9 3. Mechanical Requirements 3.1 For the Mechanical Layout, FPC stack-up and Pinout refer to the MCO. 10 4. Quality Control Requirements 11 5. Reliability Requirements 11 6. Packaging, Storage and Shipping requirements 12 Antenna Specifications SHENZHEN SUNWAY COMMUNICATION CO., LTD. The information contained in this product is of proprietary nature. It may not be reproduced without expressed written permission of Shenzhen Sunway Communication Co. Ltd., Building 9, Changxing High-tech Industrial Park, Wan’an Road, Shajing Town, Bao’an District, ShenZhen, P.R.China, zip 518104, Tel. +86-755-81773388, Fax +86-755-81773335 www.sz-sunway.com 3 1.1 Bluetooth Antenna Electrical Requirements ● _ASM ○ Covers BLE bands ○ Antenna type：PIFA ○ Antenna directional characteristics: Omnidirectional antenna ○ Antenna polarization characteristics: Linear polarization ○ Antenna connection type: Metal spring connection ○ S11< -10dB ○ Antenna Passive Efficiency ≥20% ○ Antenna Passive Peak gain < 2dBi ○ MAX communication range ≥10m (0°,90°,180°,270°,360°) ○ Manufacturer：Sunway ○ Testing organization：Sunway ○ ● Passive for mass production machines ● Return loss measurements(S11) were performed using Agilent E5071C Network Analyzer and the previously described test fixture.The testing was performed in free space. Antenna Specifications SHENZHEN SUNWAY COMMUNICATION CO., LTD. The information contained in this product is of proprietary nature. It may not be reproduced without expressed written permission of Shenzhen Sunway Communication Co. Ltd., Building 9, Changxing High-tech Industrial Park, Wan’an Road, Shajing Town, Bao’an District, ShenZhen, P.R.China, zip 518104, Tel. +86-755-81773388, Fax +86-755-81773335 www.sz-sunway.com 4 S11（dB） Bluetooth 2400 2500 FPC Antenna -13.9 -16.5 ● The gain and efficiency of the antenna was measured in the GTS1800 darkroom. Antenna Specifications SHENZHEN SUNWAY COMMUNICATION CO., LTD. The information contained in this product is of proprietary nature. It may not be reproduced without expressed written permission of Shenzhen Sunway Communication Co. Ltd., Building 9, Changxing High-tech Industrial Park, Wan’an Road, Shajing Town, Bao’an District, ShenZhen, P.R.China, zip 518104, Tel. +86-755-81773388, Fax +86-755-81773335 www.sz-sunway.com 5 Freq（MHz） FPC- Efficiency(%) 2400 25.92 2410 27.06 2420 27.05 2430 26.57 2440 26.93 2450 26.36 2460 25.7 2470 25.20 2480 24.75 2490 24.12 2500 23.59 AVG 25.75 Antenna Specifications SHENZHEN SUNWAY COMMUNICATION CO., LTD. The information contained in this product is of proprietary nature. It may not be reproduced without expressed written permission of Shenzhen Sunway Communication Co. Ltd., Building 9, Changxing High-tech Industrial Park, Wan’an Road, Shajing Town, Bao’an District, ShenZhen, P.R.China, zip 518104, Tel. +86-755-81773388, Fax +86-755-81773335 www.sz-sunway.com 6 Freq（MHz） MAX Gain 2400 -0.29 2410 -0.05 2420 -0.02 2430 -0.10 2440 -0.02 2450 -0.08 2460 -0.23 2470 -0.35 2480 -0.46 2490 -0.62 2500 -0.78 AVG -0.27 Antenna Specifications SHENZHEN SUNWAY COMMUNICATION CO., LTD. The information contained in this product is of proprietary nature. It may not be reproduced without expressed written permission of Shenzhen Sunway Communication Co. Ltd., Building 9, Changxing High-tech Industrial Park, Wan’an Road, Shajing Town, Bao’an District, ShenZhen, P.R.China, zip 518104, Tel. +86-755-81773388, Fax +86-755-81773335 www.sz-sunway.com 7 3D radiation direction（2450MHz） 2D radiation direction（2400MHz，Max G…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR260600112202 Page: 1 of 82 FCC ID: 2BBVCUAP3 TEST REPORT Application No.: GZCR2606001122HS Applicant: R. J. Reynolds Vapor Company Address of Applicant: P.O. Box 906 401 N. Main St., Winston-Salem, North Carolina. 27102. United States Manufacturer: Nicoventures Trading Ltd. Address of Manufacturer: Globe House, 1 Water Street, London, WC2R 3LA, United Kingdom Factory: 1. Shenzhen Smoore Technology Limited Qixing Branch 2. Shenzhen Smoore Technology Limited Songgang Branch 3. Shenzhen Smoore Technology Limited Guangming Branch 4. Jiangmen Moore Technology Co.,Ltd 5. Dongguan Smoore Technology Limited 6. PT Smoore Technology Indonesia Address of Factory: 1. No.6 songgang Avenue, Tantou Community, Songgang Street, Bao 'an, Shenzhen, Guangdong, China 2. No. 101,102,103, No.2, Datianyang South 2nd Road, Dongfang Community, Songgang Street, Bao’an, Shenzhen, Guangdong, China 3. No. 101, 201, 301, Building1, Hemao Optoelectronic Science and Technology Park Workshop (Phase I), High tech industrial park, Tangjia Community, Fenghuang Street, Guangming, Shenzhen, Guangdong, China 4. No.1 workshop and No. 2 workshop, Industrial Accelerator Park, No. 333 Nanshan Road, Jianghai, Jiangmen, Guangdong, China 5. 14&15, Fuxing Road, Chang’an Town, Dongguan, Guangdong, China 6. JI. Perusahaan No. 46, Banjararum, Singosari, Malang, Jawa Timur, Indonesia Product Name: e-Cigarette Model No.: V8810, UAPVU002, UAPVU001 ♣ ♣ Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark: Vuse Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2024-10-12 2026-06-09 Date of Test: 2024-10-21 to 2024-10-25 2026-06-09 to 2026-06-17 Date of Issue: 2026-07-14 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR260600112202 Page: 2 of 82 Revision Record Version Report No. Date Remark 01 GZCR260600112202 2026-07-14 Original Authorized for issue by: Jim Li/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR260600112202 Page: 3 of 82 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10- 2020+COR.1-2023 Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10- 2020+COR.1-2023 Section 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10- 2020+COR.1-2023 Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10- 2020+COR.1-2023 Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Peak Output Power ANSI C63.10- 2020+COR.1-2023 Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10- 2020+COR.1-2023 Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10- 2020+COR.1-2023 Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10- 2020+COR.1-2023 Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10- 2020+COR.1-2023 Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. N/A means Not applicable, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR260600112202 Page: 4 of 82 Model: V8810, UAPVU002, UAPVU001 According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, only different on the model name. There were two configures for all modes with some different components and BT antenna as below: BT Antenna Manufacture Maximum antenna gain Configure 1 SHENZHEN SUNWAY COMMUNICATION CO., LTD. -0.02 dBi Configure 2 SPEED Communication Technology Limited 0.78 dBi Considering the above difference, Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Spurious Emissions Below 1GHz, Radiated Spurious Emissions Above 1GHz and Radiated Emissions which fall in the restricted bands were performed to model V8810 with configure 2 in this report GZCR260600112202, and the test data for model V8810 with Configure 1 was copied from the test report GZCR241000119602. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR260600112202 Page: 5 of 82 3 Contents Page 1 Cover Page ........................................................................................................................................... 1 2 Test Summary ....................................................................................................................................... 3 3 Contents ............................................................................................................................................... 5 4 General Information.............................................................................................................................. 7 4.1 Details of E.U.T. ............................................................................................................................. 7 4.2 Description of Support Unit…

Text truncated - open the document above for the full version.

Confidential Information www.speed-hz.com SPEED has possession of proprietary information provided in this presentation and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SPEED Communication Technology. Page 1 SPEED TECHNOLOGY SPEED Communication Technology Limited Approval sheet of Mimosa Internal Antenna Customer/Project Mimosa Frequency Band 2.4-2.48GHz SCT P/N Version Rev1.0 Date 2025-07-11 Material Code SPEED Checked by RF Design by RF ME ME QC Remark Customer Date Confirmed by RF ME Remark Address: 4th & 5 th floor, Building A, No. 138 Huize Avenue, Dongjiang High-tech Industrial Park, Zhongkai High-tech Zone, Huizhou, China Manufacturer: Huizhou Speed Autoin Technology Co., Ltd Confidential Information www.speed-hz.com SPEED has possession of proprietary information provided in this presentation and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SPEED Communication Technology. Page 2 Contents 1. Indication .......................................................................................... 3 2. Matching Circuit Description ............................................................. 3 3. Measurement Data ........................................................................... 3 3.1 Return Loss ............................................................................. 3 3.2 Gain & Radiation Patterns ...................................................... 3 3.3 Peak gain & Efficiency ............................................................ 3 4. Attachment ....................................................................................... 5 4.1 S11 Parameter ........................................................................ 5 4.2 Radiation Pattern .................................................................... 5 5. Test setup in the production line ....................................................... 8 6. Antenna drawing ............................................................................... 9 Confidential Information www.speed-hz.com SPEED has possession of proprietary information provided in this presentation and this proprietary information shall be kept in strict confidence and not disclosed to any person…

Text truncated - open the document above for the full version.