2BBVO-EAC-AV20Auto Vent/Dashboard 10W Wireless Charger and Phone Holder

1 23 4 Auto Vent Dashboard lOW Wireless Charger & Phone Holder Instruction Manual EAC-AV20 READ ALL INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THIS MANUAL In the Box • lOW Wireless Charger & Phone Holder (xl) • Adhesive Fixed Stand (xl) • Air Vent Clip (xl) • Securing Knob (xl) • Power Cable (xl) • User Manual (xl) Safety Precautions • This product is NOT a toy, keep away from children and pets • Only use the device according to the instructions in this manual. Never use the device for anything other than its intended purpose. • ONLY use the supplied power cable • Do not open this product or attempt to repair the unit yourself if it 1s not working properly. Doing so risks fire, shock or injury. • When not in use, the device should be stored in a dry, cool loca廿on, away from sources of water or heat. • Do not expose device or power cable to extreme temperatures (heat or cold), open flames, humid or wet condi廿ons • Do not submerge in water. Do not use in a loca廿onwhere the device or power cable could fall into liquid. • Unplug the charging cable when not in use. Do not pull the charging cable to disconnect, or use the cable as a handle • Do no use if device or power cable is damaged. If device or power cable is damaged, it MUST be serviced or replaced by the manufacturer or its service agent before using again • Attachments on the back of your smartphone can impede effec廿veness of the wireless charger, and lead to overheating. Remove attachments from your smartphone before charging on this wireless charger. Product � ＠ CD Wireless Charging Surface @ Clamping Arms ® Securing Knob © Micro USB Input ® LED Indicator ® Air Vent Clip (J) Adhesive Stand ＠ 三 © How To Mount • Turn the securing knob on the back of bracket counterclockwise to loosen. • Push the air vent clip or adhesive stand into the ball joint adapter on the back of bracket , Turn the securing knob on the back of bracket clockwise to tighten • If using the air vent clip, press the button on air vent clip to mount the bracket to air vent of a car. • If using the adhesive stand, peel off the sticker cover on the bottom and attach it to a smooth surface, such as the car dashboard. • Place smartphone on the phone mount, the clamping arms will hold the smartphone automatically. • Slide smartphone upwards to remove from the mount • The 360" rotating ball joint on the mount enables adjustment for flexible viewing angles while driving Instructions • Plug the small connector of the included charging cable into the micro USB charging port on the phone mount • Plug the large connector of the included charging cable into an USB power source, such as the USB port on a computer or into a compatible SV USB car charger (not included) • The LED indicator will fiash RED and BLUE alternatively 3 times before glow solid RED to indicate the wireless charger is in standby mode and ready to begin charging. • Place a wireless charging enabled smartphone on the charging surface, the smartphone will begin to charge automatically. The LED will glow BLUE while smartphone is charging. Note: If the LED indicator is flashing when the wireless charger is in use, either the smartphane is NOT wireless charging enabled, or there is an abject between the smartphone and wireless charging surface interfering with the charging process. Tech Specifications • Input Power: DC 5V/3A • Wireless Charging Output: lOW FCC Information This device complies with Part 15 of the FCC Rules. Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, 范 Made in China The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Ausentic Technology Co. Ltd The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 07/06/2023 U.S. Agent Designation [Ausentic Technology Co. Ltd] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BBVO-EAC-AV20): Name of U.S. agent contact person: Tim Payne Company U.S. agent: FCC US Agent, LLC Physical U.S. address of agent: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent: 0033402884 Email address of U.S. agent: [email protected] Phone of U.S. agent: 708-571-3148 FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of [Ausentic Technology Co. Ltd]. [Ausentic Technology Co. Ltd] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature Fancy Lin Manager Ausentic Technology Co. Ltd Signature Tim Payne Manager FCC US Agent, LLC 48_[model] US_Agent_2.911(d)(7) - U, V03

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Ausentic Technology Co. Ltd Address: A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, China Phone: +86-755-29082399 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2023-07-05 Signature Date Printed Name of Signee: Fancy Lin Company: Ausentic Technology Co. Ltd Address: A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, China Phone: +86-755-29082399 Fax: N/A Email: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BBVO-EAC-AV20 EAC-AV20 We, applicant Company Name: Ausentic Technology Co. Ltd Address: A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, China Phone: +86-755-29082399 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2023-07-05 Signature Date Printed Name of Signee: Fancy Lin Company: Ausentic Technology Co. Ltd Address: A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, China Phone: +86-755-29082399 Fax: N/A Email: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BBVO-EAC-AV20 EAC-AV20 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Parts Lists • the Tune Up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2023-07-05 Signature Date Printed Name of Signee: Fancy Lin Company: Ausentic Technology Co. Ltd Address: A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, China Phone: +86-755-29082399 Fax: N/A Email: [email protected]

Ausentic Technology Co. Ltd A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, China Date: July 05, 2023 FCC ID: 2BBVO-EAC-AV20 Model Number: EAC-AV20 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Ausentic Technology Co. Ltd hereby declare that our product (Auto Vent/ Dashboard 10W Wireless Charger and Phone Holder) Model Number: EAC-AV20 meet item 5.2 of KDB 680106v03r01 as follow; Requirements of KDB 680106 D01 Yes / No Description Power transfer frequency is less than 1 MHz Yes The device operate in the frequency range is 111 KHz – 205 KHz Output power from each primary coil is less than or equal to 15 watts. Yes The maximum output power of the primary coil is 10W The system may consist of more than one source primary coils, charging one or more clients. If more than one primary coil is present, the coil pairs may be powered on at the same time. Yes The transfer system includes single coil that is able to detect receiver device Client device is placed directly in contact with the transmitter. Yes Client device is placed directly in contact with the transmitter Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes Mobile exposure condition only The aggregate H-field strengths anywhere at or beyond 15 cm surrounding the device, and 20 cm away from the surface from all coils that by design can simultaneously transmit, and while those coils are simultaneously energized, are demonstrated to be less than 50% of the applicable MPE limit. Yes The EUT H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Please contact me if you have any question. Ausentic Technology Co. Ltd A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, China Sincerely, (Signed) Name/Title: Fancy Lin / Manager Company: Ausentic Technology Co. Ltd Address: A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, China Tel: +86-755-29082399 Fax: N/A E-Mail: [email protected]

Page 1 of 3 FCC ID:2BBVO-EAC-AV20 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 3 FCC ID:2BBVO-EAC-AV20 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 3 FCC ID:2BBVO-EAC-AV20 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6

Page 1 of 1 FCC ID:2BBVO-EAC-AV20 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L2.5cm x 2.0cm) Label Location Auto Vent/ Dashboard 10W Wireless Charger and Phone Holder Model: EAC-AV20 FCC ID:2BBVO-EAC-AV20

Page 1 of 2 FCC ID:2BBVO-EAC-AV20 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 2 FCC ID:2BBVO-EAC-AV20 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Coil Antenna

Page 1 of 10 FCC ID: 2BBVO-EAC-AV20 Report No.: LCSA070622138EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity RF Exposure Evaluation Report 1. Product Information FCC ID: 2BBVO-EAC-AV20 Product Name Auto Vent/ Dashboard 10W Wireless Charger and Phone Holder Model Number EAC-AV20 Power Supply Input: 5V3A Wireless Output:10W Modulation Type ASK Frequency Range 111.0~205.0KHz Operation Frequency 111KHz Antenna Type Coil Antenna Hardware version / Software version / Accessories / Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Device 2. Evaluation Method Per KDB 680106 D01 Section 3. RF Exposure Requirements; 1) Consumer wireless power transfer devices approved under Part 18 in some cases have to demonstrate compliance with RF exposure requirements. The potential for exposure must be assessed according to the operating configurations of the wireless system and the exposure conditions of users and bystanders. RF exposure must be evaluated with the client device(s) being charged by the primary at maximum output power. The RF exposure requirements must be determined in conjunction with the device operating characteristics, according to the mobile and portable exposure requirements in Section 2.1091 and Section 2.1093 of the rules. SAR and MPE limits do not cover the frequency range for wireless power transfer applications which operate below 100 kHz and 300 kHz respectively; therefore, RF exposure compliance needs to be determined with respect to 1.1307 (c) and (d) of the FCC rules. 2) Based on the design and implementation of the power transfer application, it must be clearly identified if mobile or portable RF exposure conditions apply. Devices that are installed to provide separation of at least 20 cm from users and bystanders may qualify for mobile exposure conditions. For some conditions where users and bystanders may be exposed at closer than 20 cm, section 2.1091(d) (4) of the rules may apply. 3) For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine Page 2 of 10 FCC ID: 2BBVO-EAC-AV20 Report No.: LCSA070622138EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity the applicable exposure limits below 100 kHz. 4) Portable exposure conditions from 100 kHz to 6 GHz are determined with respect to SAR requirements. Existing SAR systems and test procedures are generally intended for measurements above 100 MHz. While numerical modeling can be an alternative, the constraints of substantial computational resources at low frequencies could introduce further limitations. Under these circumstances, including operations below 100 kHz, the Commission may consider a combination of analytical analysis, field strength, radiated and conducted power measurements, in conjunction with some limited numerical modeling to assess compliance. 5) Depending on the operating frequency, existing SAR and MPE measurement procedures may be adapted to evaluate wireless power transfer devices for compliance with respect to mobile or portable exposure conditions. If the grantee or its test lab have any questions regarding RF exposure evaluation they should contact the FCC Laboratory with sufficient system operating configuration details to determine if RF exposure evaluation is necessary and, if required, how to apply specific test procedures. Below 100 MHz, when SAR testing is required and the device is operating at close proximity to persons, information on device design, implementation, operating configurations, exposure conditions of users and bystanders are needed to determine the evaluation and testing requirements. In addition, the influence of nearby objects may also need consideration according to the wireless power transfer system implementation; for example, the effects of placing the device, its coils or radiating elements on or near metallic surfaces 3. Evaluation Limit 3.1 Refer evaluation method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 680106 D01 RF Exposure Wireless Charging Apps v03: RF Exposure Considerations for Low Power Consumer Wireless Power Transfer Applications FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices FCC CFR 47 part 18.107:Indusial, Scientific, and Medical Equipment Page 3 of 10 FCC ID: 2BBVO-EAC-AV20 Report No.: LCSA070622138EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 3.2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Aver…

Text truncated - open the document above for the full version.

1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: ABC D2EHI 49±1.020.0±0.50.81±0.05 42±33±1.52.6 MAX 3.WINDING： 1.1底部印字100 STE P TAP E REMAR K N1 4.ELECTRICAL SPECIFICATION: ITEM SPEC SPECIFICATION FOR APPROVAL START-FINISH S-F L The coil was added with a magnetic 10TS (Ref) Qvalue TURNSWIRE TYPE HI-POT 6.3uH±10% 100KHz,0.25V AT 25°C silk-covered wire 2UEW DCR 75mΩ Max TES T CON D S-F

Page 1 of 23 FCC ID: 2BBVO-EAC-AV20 Report No.: LCSA070622138EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Ausentic Technology Co. Ltd Auto Vent/ Dashboard 10W Wireless Charger and Phone Holder Test Model: EAC-AV20 Prepared for : Ausentic Technology Co. Ltd Address : A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, Guangdong, China. Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : July 13, 2022 Number of tested samples : 2 Serial number : A070622138-1, A070622138-2 Date of Test : July 13, 2022 ~ July 21, 2022 Date of Report : July 22, 2022 Page 2 of 23 FCC ID: 2BBVO-EAC-AV20 Report No.: LCSA070622138EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15C Report Reference No. ................. : LCSA070622138EA Date Of Issue ................................. : July 22, 2022 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : Ausentic Technology Co. Ltd Address .......................................... : A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, Guangdong, China. Test Specification Standard ......................................... : FCC CFR 47 PART 15C Test Report Form No...................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : Auto Vent/ Dashboard 10W Wireless Charger and Phone Holder Trade Mark ..................................... : N/A Test Model ...................................... : EAC-AV20 Power Supply ................................. : Input: 5V3A Wireless Output:10W Result ........................................... : Positive Compiled by: Supervised by: Approved by: Jack Liu/Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 23 FCC ID: 2BBVO-EAC-AV20 Report No.: LCSA070622138EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA070622138EA July 22, 2022 Date of issue Test Model.............................. : EAC-AV20 EUT......................................... : Auto Vent/ Dashboard 10W Wireless Charger and Phone Holder Applicant............................... : Ausentic Technology Co. Ltd Address.................................. : A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, Guangdong, China. Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Ausentic Technology Co. Ltd Address................................... : A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, Guangdong, China. Telephone............................... : / Fax.......................................... : / Factory................................... : Ausentic Technology Co. Ltd Address................................... : A1 4th floor & A1 6th floor, Building 6, Tongfuyu Industrial Zone, Lezhujiao, Huangmabu Community, Hangcheng Street, Baoan District, Shenzhen, Guangdong, China. Telephone............................... : / Fax.......................................... : / Page 4 of 23 FCC ID: 2BBVO-EAC-AV20 Report No.: LCSA070622138EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Conten…

Text truncated - open the document above for the full version.

Page 1 of 1 FCC ID:2BBVO-EAC-AV20 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Setup Photos of the EUT Radiated Emission below 30MHz Radiated Emission from 30MHz to 1GHz