2BBWL-MIYOOMINIPLUSMIYOO MINI PLUS Retro Handheld Game Consoles

START MENU A B X Y SLECT L R L2R2 1. 2. 1. 2. 3. Instructions indiccator light power button Volume Ad- justemnet Arrow keys 3.5mm audio port TF card slot TypeC charging port Horn Battery compart-ment Start using Insert the TF card that has been installed with the game into the TF card slot; Charge the equipment to ensure normal startup; Start Up: press the power key for 1 seconds. How to install games Take the TF card out of the machine, insert the card reader to connect to the computer, and copy the "Game ROM" to the folder of the corresponding game type in the TF card; Insert the TF card into the TF card slot, Press [MENU] to open the MENU, and select "Refresh ROM". On-off Boot: long press the power supply for 1 seconds Shutdown: press the power supply for 3 seconds to open the shutdown menu, and press [A] to shut down. Record 1/10Record 1/10 Keys Map BGM Volume Hibernate Factory Reset 5m later Language Brightness AB OKBACK GBGB 2/2 2/2 Ready 2 Rumble ... Super Mario Advance Yu-Gi-Oh! Dungeondice... Rockman King Of Fighter 98 Castlevania Circle Of T.... Power prompt Start using In the game catalog, select a game and press[A]]Start the game. Exit the game In the game, Press [MENU] to open the MENU, select the "Exit" option, and press [A] to Exit the game. Save or read game progress In the game, Press [MENU] to open the MENU, select the "Save" or "Load" option, press the direction key [LEFT, RIGHT] to select the recording position, press [A] to save or read the current progress. A maximum of 10 records can be saved. Set Press the arrow key [UP,DOWN] to select the setting items: screen brightness, volume, sleep time, which can be modified by the direction key [LEFT, RIGHT]; Select setting items: Language, key mapping, System Restore, etc., and press [A] to enter the corresponding setting page. Indicator light Green light Always On: enabled Red light Always On: charging Blue light Always On: charging completed Headset You can connect the earphone through a 3.5mm audio port. Pay attention to the following security precautions when using it to avoid damage caused by liquid entering the machine; Do not modify, repair or disassemble the product; Do not use any diluent or volatile liquid to clean this product; Avoid exposure to high temperature or direct contact with flame. Operation TIPS Idle mode, sleep mode, and wake-up 60 seconds no operation enters the idle mode, and the screen becomes dark; In idle mode, press any button to wake up; In sleep mode, press the power key to wake up. Firmware Upgrade Place the Mirror file in the root directory of the TF card, connect the charging line to enter the charging mode, and the nautomatically start up and upgrade. Shutdown status Insert the TF card slot and + 方向键 音量调节 喇叭 键 B 键 键 键 电源键 指示灯 TypeC充电口 TF卡槽3.5mm音频口 L键 R键 L2键 R2键 电池仓 开始使用 如何安装游戏 把TF卡从本机取出，插入已经连接电脑 的读卡器。把“游戏ROM“拷贝至TF 卡中对应的游戏类型目录。 把TF卡插入TF卡槽，按MENU打开菜 单，选择“刷新ROM” 1. 2. 把已经安装游戏的TF卡插入TF卡槽 给设备充电，保证可以正常开机 长按电源键1秒开机 1. 2. 3. 使用说明书 开关机 开机：长按电源键1秒开机 关机：长按电源键3秒打开关机菜单，按 【A】关机 开始游戏 退出游戏 保存或读取游戏进度设置指示灯 绿灯常亮：已开机 红灯常亮：正在充电 蓝灯常亮：充电完成 请勿把任何液体喷洒到机身，以免液体进 入机器内部造成损坏。 请勿对产品进行改装、修理或拆卸。 不要使用任何稀释剂或挥发性液体来清洁 本产品。 避免暴露在高温环境，或直接接触火焰。 安全事项 使用时请注意以下安全事项 耳机 您可以通过3.5mm音频口连接耳机 在游戏中，按【MENU】打开菜单，选中 “Exit Game”选项，按【A】退出游戏 在游戏中，按【MENU】打开菜单，选中 “Save”或“Load”选项，按方向键 【LEFT、RIGHT】选择记录位置，按 【A】保存或读取当前进度。最多支持保 存10条记录。 按方向键【UP、DOWN】选择设置项： 在游戏目录内，选中游戏，按【A】开始 游戏 电量提示 Record 1/10Record 1/10 Keys Map BGM Volume Hibernate Factory Reset 5m later Language Brightness AB OKBACK GBGB 2/2 2/2 Ready 2 Rumble ... Super Mario Advance Yu-Gi-Oh! Dungeondice... Rockman King Of Fighter 98 Castlevania Circle Of T.... 操作提示 固件升级 关机1. 2. 空闲模式、休眠模式与唤醒 秒无操作进入空闲模式，屏幕变暗 空闲模式下，按任意键唤醒 5分钟无操作或短按电源键进入休眠模 式，关闭屏幕与声音，进入休眠模式后 休眠模式下，短按电源键唤醒 3. 分钟无操作自动关机； 10 START MENU A X Y SLECT + FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

HuizhouCityYizaixuanE-CommerceCo.,Ltd. Building2,HaibinAvenue,HuangbuTown,HuidongCounty,Huizhou City,GuangdongProvince,China FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2023/06/30 U.S.AgentDesignation HuizhouCityYizaixuanE-CommerceCo.,Ltd.acknowledgestheirconsentforthefollowingcontactlocatedin theUnitedStatestoactastheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought (FCCID:2BBWL-MIYOOMINIPLUS): NameandcompanyofU.S.agent:GSSSERVICEINC PhysicalU.S.addressofagent:6547NAcademyBlvd#226ColoradoUSA FRNofU.S.agent:0033402082 EmailaddressofU.S.agent:[email protected] GSSSERVICEINCacknowledgestheirobligationtoacceptserviceofprocessonbehalfofHuizhouCity YizaixuanE-CommerceCo.,Ltd. HuizhouCityYizaixuanE-CommerceCo.,Ltd.withtheFRN[0033956343]acceptsitsobligationtomaintain anagentforserviceofprocessintheUnitedStatesfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheveris later. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslistedunder§ 2.911(d)(7). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB 986446D01. Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,thegranteeisobligatedtonotify theFCCwithin30daysviathegrantingTCB. Sincerely, Signature HuangSheng Manager HuizhouCityYizaixuanE-CommerceCo.,Ltd. Signature MichouxLogan PM GSSSERVICEINC 4 8 _ [ m o d e l ] U S _ A g e n t _ 2 . 9 1 1 ( d ) ( 7 ) - U , V 0 5

Sincerely, Name/Title： Huang Sheng /Manager Company: Huizhou City Yizaixuan E-Commerce Co., Ltd. Address: Building 2, Haibin Avenue, Huangbu Town, Huidong County, Huizhou City,Guangdong Province, China Phone: 0755 23570025 Fax: N/A E-Mail: [email protected]

FCC ID: 2BBWL-MIYOOMINIPLUS External Photos of the EUT Photo 1 Photo 2 Photo 3 FCC ID: 2BBWL-MIYOOMINIPLUS Photo 4 Photo 5 Photo 6 FCC ID: 2BBWL-MIYOOMINIPLUS Photo 7

Label and Location Size: L: 3.0cm*W: 2.0cm Label and Location FCC ID : 2BBWL-MIYOOMINIPLUS

FCC ID: 2BBWL-MIYOOMINIPLUS Internal Photos of the EUT Photo 1 Photo 2 Photo 3 FCC ID: 2BBWL-MIYOOMINIPLUS Photo 4 Photo 5 Photo 6 2.4G WIFI PCB Antenna

RF Exposure evaluation FCC ID: 2BBWL-MIYOOMINIPLUS 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.3. Manufacturing tolerance 802.11b (Peak) Channel Channel 01 Channel 06 Channel 11 Target (dBm) 8.5 8.0 8.0 Tolerance ±(dB) 1.0 1.0 1.0 802.11g (Peak) Channel Channel 01 Channel 06 Channel 11 Target (dBm) 8.0 7.0 6.0 Tolerance ±(dB) 1.0 1.0 1.0 802.11n(H20) (Peak) Channel Channel 01 Channel 06 Channel 11 Target (dBm) 8.0 6.0 6.0 Tolerance ±(dB) 1.0 1.0 1.0 Page 2 of 2 2. E v a l u a t i o n R e s u l t Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BT 2.450 5 9.5 8.9125 2.7901 <3.0 Yes 3. C o n c l u s i o n The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06 .....................End of Report.........................

1. Antenna Description: Antenna type PCB antenna Model MIYOO MINI PLUS Frequency range 2400-2500MHz Manufacturer Huizhou City Yizaixuan E-Commerce Co., Ltd. ANT Peak Gain 1.35 dBi 2. Antenna Photo: Length :15.33mm Width:5.56mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID............................................. : CTA23062001801 2BBWL-MIYOOMINIPLUS Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Amy Wen Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Jun. 27, 2023 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name ............................ : Huizhou City Yizaixuan E-Commerce Co., Ltd. Address ............................................ : Building 2, Haibin Avenue, Huangbu Town, Huidong County, Huizhou City,Guangdong Province, China Test specification ........................... : Standard ........................................... : FCC Part 15.247 TRF Originator .................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : MIYOO MINI PLUS Retro Handheld Game Consoles Trade Mark ....................................... : N/A Manufacturer .................................... : Huizhou City Yizaixuan E-Commerce Co., Ltd. Model/Type reference ...................... : MIYOO MINI PLUS Listed Models .................................. : N/A Modulation Type ............................... : CCK/DSSS/ OFDM Operation Frequency ........................ : From 2412 - 2462MHz Rating ............................................... : DC 3.7V From Battery and DC 5.0V From external circuit Result ............................................... : PASS Report No.: CTA23062001801 Page 2 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : MIYOO MINI PLUS Retro Handheld Game Consoles Model /Type : MIYOO MINI PLUS Series Model No. N/A Applicant : Huizhou City Yizaixuan E-Commerce Co., Ltd. Address : Building 2, Haibin Avenue, Huangbu Town, Huidong County, Huizhou City,Guangdong Province, China Manufacturer : Huizhou City Yizaixuan E-Commerce Co., Ltd. Address : Building 2, Haibin Avenue, Huangbu Town, Huidong County, Huizhou City,Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA23062001801 Page 3 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S .................................................................. 4 2 S U M M A R Y ............................................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 5 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E N V I R O N M E N T ............................................................... 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Test Description 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ............................................ 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emission 13 4.3 Maximum Peak Conducted Output Power 20 4.4 Power Spectral Density 21 4.5 6dB Bandwidth 24 4.6 Out-of-band Emissions 27 4.7 Antenna Requirement 34 5 T E S T S E T U P P H O T O S O F T H E E U T .......................................... 35 6 P H O T O S O F T H E E U T ............................................................. 36 Report No.: CTA23062001801 Page 4 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 v05r02: Guidance for Compliance Measurements on Digital Transmission Systems (DTS) ,Frequency Hopping Spread Spectrum System(HFSS), and Hybrid System Devices Operating Under §15.247 of The FCC rules. Report No.: CTA23…

Text truncated - open the document above for the full version.

Report No.: CTA23062001801 Page 30 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11g Reference Reference CH06 CH11 30MHz-3GHz 30MHz-3GHz 3GHz -25GHz 3GHz -25GHz Report No.: CTA23062001801 Page 31 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 Reference Reference CH01 CH06 30MHz-3GHz 30MHz-3GHz 3GHz -25GHz 3GHz -25GHz Report No.: CTA23062001801 Page 32 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 Reference CH11 30MHz-3GHz 3GHz -25GHz Report No.: CTA23062001801 Page 33 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Band-edge Measurements for RF Conducted Emissions: 802.11b Left bandedge Right bandedge 802.11g Left bandedge Right bandedge 802.11n(HT20) Left bandedge Right bandedge Report No.: CTA23062001801 Page 34 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 4.7 Antenna Requirement Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited FCC CFR Title 47 Part 15 Subpart C Section 15.247(c) (1) (I): (i) Systems operating in the 2400-2483.5 MHz band that is used exclusively for fixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6dBi. Test Result: The maximum gain of antenna was 1.35 dBi. Remark:The antenna gain is provided by the customer , if the data provided by the customer is not accurate, Shenzhen CTA Testing Technology Co., Ltd. does not assume any responsibility. Report No.: CTA23062001801 Page 35 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 5 T e s t S e t u p P h o t o s o f t h e E U T Report No.: CTA23062001801 Page 36 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 6 P h o t o s o f t h e E U T Report No.: CTA23062001801 Page 37 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA23062001801 Page 38 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA23062001801 Page 39 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA23062001801 Page 40 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn ********************** End of Report **********************

FCC ID: 2BBWL-MIYOOMINIPLUS Test Setup Photos of the EUT