2BBWRJK-402AThermal label printer

Thermal Label Printer Quick Installation Guide V1.0402A Opening-box List Standard Accessories Appearance and Components 2 3 Preparations before usage Startup & Shutdown/Usage notices: 1.Turn the printer power switch to theＩStatus, that is, to turn on the power switch; 2.Turn the printer power switch to theＯStatus, that is, to turn off the power switch; 3.The power supply must be turned off using a power switch. If you directly unplug the power plug, it can easily damage the printer Internal circuit, resulting in the loss of printing data; 4.When the power is switched on again, wait for a while (greater than5 Seconds) Open immediately without interval The power supply is easy to cause failure; 5.Please use the original power supply, otherwise it may reduce the print quality or damage the printer. Cable Connection 3 (1) Facing the front of the machine, pull the upper cap lever forward and lift the upper cap. (2) Remove the jamme (1) Open the top cover of the machine, press the inlet paper guide rail at the same time,According to the size of the folded paper, adjust the guide rail spacing. (2) Put the folded paper into the inlet paper guide rail, and cover the top cover. (3)Confirm that the printer has detected the paper feeding, and move the paper suction and normal paper output. Folded paper installation Solution for stuck paper 4 5 Indicator statusStatus description Blue light flasging / Blue light always on Normal standby / Bluetooth connected Buzzer alarm Red light always on Cover opening error Paper shortage error Red light flashes 4 times 4 beeps Seam label error Red light flashes 2 times Overheating error Red light keeps flashing Keep ringing / / Keys and Indicators 1.To ensure the optimal printing quality of the printer, please use the original power adapter; 2.Clean the printing head regularly or when the printing is not clear, which can ensure the high-quality printing effect; 3.When changing the paper specifications (including paper thickness, quality), it is recommended to make a label paper correction; 4.Avoid the use of inferior paper, inferior paper will greatly wear the printer, causing the printer heating damage; 5.This product with automatic paper suction function, please use the back-end paper suction way into the paper, open the cover of the paper will cause paper waste. 6.If the quality of the paper is poor and the heating sheet has been cleaned and the printing effect still cannot be satisfied,The printing concentration can be increased appropriately by driving it. Printer usage tips: Bluetooth Pairing and Printing (only valid for printers withBluetooth 6 FCC warning： 1. This device should be installed and operated with minimum distance 20cm between the radiator&your body. 2. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 3.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 4.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.

Dongguan Kincan Electronic Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/8/2023 U.S. Agent Designation Dongguan Kincan Electronic Technology Co., Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BBWRJK-402A): Name and company of U.S. agent: STEYR INC Physical U.S. address of agent: 1312 17th Street #692 , Denver, co 80202, United States FRN of U.S. agent: 0033737586 Email address of U.S. agent: [email protected] STEYR INC acknowledges their obligation to accept service of process on behalf of Dongguan Kincan Electronic Technology Co., Ltd Dongguan Kincan Electronic Technology Co., Ltd with the FRN 0033962002 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature [Name] Renjien Liang [Title] Manager [Company] Dongguan Kincan Electronic Technology Co., Ltd [Name of U.S. agent] Fairy Lee [Title of U.S. agent] Manager [Company of U.S. agent] STEYR INC 48_[mo del] US_Agent_2.911(d)(7) - U, V05

Name/Title： Renjie Liang/ Manager Company: Dongguan Kincan Electronic Technology Co., Ltd Address: No.1 Lane 4 Jinglian new village, Jinglian community Qiaotou town Dongguan city Guangdong, China Phone: 13266549672 Fax: 13266549672 E-Mail: [email protected]

Thermallabelprinter FCCID:2BBWRJK-402A JK-402AExternalPhotographs

JK-402ALabelandlabellocation ProductName:Thermallabelprinter Model:JK-402A FCCID:2BBWRJK-402A

Thermallabelprinter FCCID:2BBWRJK-402A JK-402AInternalPhotographs

CTCLaboratories,Inc.ReportNo.:CTC20230054E02 1-2/F.,Building2,JiaquanBuilding,GuanlanHigh-TechPark,Shenzhen,Guangdong,China Tel:+86-755-27521059Fax:+86-755-27521011Http://www.sz-ctc.org.cn CTCLaboratories,Inc. 1-2/F.,Building2,JiaquanBuilding,GuanlanHigh-TechPark,Shenzhen,Guangdong,China Tel.:(86)755-27521059Fax:(86)755-27521011Http://www.sz-ctc.org.cn Foranti-fakeverification,pleasevisittheofficialwebsiteofCertificationand AccreditationAdministrationofthePeople’sRepublicofChina:yz.cnca.cn MaximumPermissibleExposureEvaluation FCCID:2BBWRJK-402A AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironment impactofhumanexposuretoradiofrequency(RF)Radiationasspecifiedin§1.1307(b) EUTSpecification ProductName: Thermallabelprinter TradeMark: Model/Typereference: JK-402A ListedModel(s): JK-401A,JK-401B,JK-402B,JK-401PL,JK-301A,JK-302AJK-301B, JK-302B,JK-301PL,JK-302PL,JK-201B,JK-201PL JK-202PL Frequencyband (Operating) BLE:2.402GHz~2.480GHz Devicecategory Portable(<5mmseparation) Mobile(>20cmseparation) Fixed(>20cmseparation) Others___ Exposureclassification Occupational/Controlledexposure(S=5mW/cm2) GeneralPopulation/Uncontrolledexposure(S=1mW/cm2) Antennadiversity Singleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Antennagain3.55dBi Evaluationapplied MPEEvaluation SAREvaluation LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 Page 2 of 2 ReportNo.:CTC20230054E02 CTCLaboratories,Inc. 1-2/F.,Building2,JiaquanBuilding,GuanlanHigh-TechPark,Shenzhen,Guangdong,China Tel.:(86)755-27521059Fax:(86)755-27521011Http://www.sz-ctc.org.cn Foranti-fakeverification,pleasevisittheofficialwebsiteofCertificationand AccreditationAdministrationofthePeople’sRepublicofChina:yz.cnca.cn Friistransmissionformula:Pd=(Pout*G)\(4*pi*R 2 ) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainmW G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandtotalpowerinputtothe antenna,throughthecalculation,WewillknowthedistancewheretheMPElimitisreached. MeasurementResult Band Frequency (MHz) Antenna Gain (dBi) Maximum Power (dBm) Tuneup tolerance (dBm) Max.Tune upPower (dBm) Power Densityat 20cm (mW/cm 2 ) Limit (mW/cm 2 ) GFSK(BLE)24023.550.240±110.00061.000 Note: Foramoredetailedfeaturesdescription,PleaserefertotheRFTestReport. 0.0006(mW/cm 2 )＜1(mW/cm 2 ),SothetransmittercomplieswiththeRFexposurerequirementsandthe SARisnotrequired. **********************THEEND**********************

BluetoothAntenna specification&Testreport YichipMicroelectronics ©2014 ANT8: Gian and Efficiency Frequency (MHz) Efficiency(%)Gain(dBi) 230012.77-2.33 232020.15-0.40 234025.710.95 236030.321.59 238030.901.63 240033.262.52 242038.933.55 244038.733.34 246036.322.93 248035.232.87 250035.822.53 252033.021.93 254031.621.42 3D and 1DRadiation Patterns Total Power (dBm) -14 4 -10 -6 -2 X Y Z Azimuth = 0.0 Elevation = 0.0 Roll = 0.0 Cut1 P o w e r ( d B m ) Angle (? Scale: 1/div Min: -4 Max: 4 0 180 30 210 60 240 90270 120 300 150 330 Cut2 P o w e r ( d B m ) Angle (? Scale: 2/div Min: -10 Max: 4 0 180 30 210 60 240 90270 120 300 150 330 Cut3 P o w e r ( d B m ) Angle (? Scale: 1/div Min: -7 Max: 3 0 180 30 210 60 240 90270 120 300 150 330 ANT1-ANT85dbmTRPtestresult： Band ANTFrequency Result (dBm) Note BT ANT12440 -6.501 ANT22440 -0.582 ANT32440 -2.913 ANT42440 0.924 ANT52440 0.095 ANT62440 0.346 ANT72440 0.147 ANT82440 -2.148

CTCLaboratories,Inc. 1-2/F.,Building2,JiaquanBuilding,GuanlanHigh-TechPark,Shenzhen,Guangdong,China Tel:+86-755-27521059Fax:+86-755-27521011Http://www.sz-ctc.org.cn TESTREPORT ReportNo.··························:CTC20230054E01 FCCID································:2BBWRJK-402A Applicant····························: DongguanKincanElectronicTechnologyCo.,Ltd Address·······························: No.1Lane4Jingliannewvillage,JingliancommunityQiaotoutown DongguancityGuangdong,China Manufacturer························: DongguanKincanElectronicTechnologyCo.,Ltd Address·······························: No.1Lane4Jingliannewvillage,JingliancommunityQiaotoutown DongguancityGuangdong,China ProductName······················:Thermallabelprinter TradeMark···························: Model/Typereference·············: JK-402A ListedModel(s)·····················: JK-401A,JK-401B,JK-402B,JK-401PL,JK-301A,JK-302A JK-301B,JK-302B,JK-301PL,JK-302PL,JK-201B,JK-201PL JK-202PL Standard·····························:FCCCFRTitle47Part15SubpartCSection15.247 Dateofreceiptoftestsample...:June29,2023 Dateoftesting.......................:June29,2023~July2,2023 Dateofissue.........................: July2,2023 Result.................................:PASS Compiledby: (Printedname+signature)ZoeXie Supervisedby: (Printedname+signature)MillerMa Approvedby: (Printedname+signature) WalterChen $英文 TestingLaboratoryName......:CTCLaboratories,Inc. Address...............................: 1-2/F.,Building2,JiaquanBuilding,GuanlanHigh-TechPark, Shenzhen,Guangdong,China Thistestreportmaybeduplicatedcompletelyforlegalusewiththeapprovaloftheapplicant.Itshould notbereproducedexceptinfull,withoutthewrittenapprovalofourlaboratory.Theclientshouldnot useittoclaimproductendorsementbyCTC.Thetestresultsinthereportonlyapplytothetested sample.Thetestreportshallbeinvalidwithoutallthesignaturesoftestingengineers,reviewerand approver.AnyobjectionsmustberaisedtoCTCwithin15dayssincethedatewhenthereportis received.Itwillnotbetakenintoconsiderationbeyondthislimit.Thetestreportmerelycorrespondto thetestsample. Page2of32ReportNo.:CTC20230054E01 CTCLaboratories,Inc. 1-2/F.,Building2,JiaquanBuilding,GuanlanHigh-TechPark,Shenzhen,Guangdong,China Tel.:(86)755-27521059Fax:(86)755-27521011Http://www.sz-ctc.org.cn Foranti-fakeverification,pleasevisittheofficialwebsiteofCertificationand AccreditationAdministrationofthePeople’sRepublicofChina:yz.cnca.cn TableofContentsPage 1.7TESTSUMMARY.................................................................................................................................................3 1.1.TESTSTANDARDS.....................................................................................................................................................3 1.2.REPORTVERSION.....................................................................................................................................................3 1.3.TESTDESCRIPTION...................................................................................................................................................4 1.4.TESTFACILITY..........................................................................................................................................................5 1.5.MEASUREMENTUNCERTAINTY...................................................................................................................................5 1.6.ENVIRONMENTALCONDITIONS...................................................................................................................................6 2.GENERALINFORMATION......................................................................................................................................7 2.1.CLIENTINFORMATION...............................................................................................................................................7 2.2.GENERALDESCRIPTIONOFEUT.................................................................................................................................7 2.3.ACCESSORYEQUIPMENTINFORMATION.......................................................................................................................8 2.4.OPERATIONSTATE.....................................................................................................................................................9 2.5.MEASUREMENTINSTRUMENTSLIST..........................................................................................................................10 3.TESTITEMANDRESULTS....................................................................................................................................11 3.1.CONDUCTEDEMISSION...........................................................................................................................................11 3.2.RADIATEDEMISSION...............................................................................................................................................14 3.3.BANDEDGEEMISSIONS(RADIATED).........................................................................................................................19 3.4.BANDEDGEANDSPURIOUSEMISSIONS(CONDUCTED)...............................................................................................22 3.5.DTSBANDWIDTH..................................................................................................................................................27 3.6.PEAKOUTPUTPOWER............................................................................................................................................29 3.7.POWERSPECTRALDENSITY.....................................................................................................................................30 3.8.ANTENNAREQUIREMENT........................................................................................................................................32 Page3of32ReportN…

Text truncated - open the document above for the full version.

Thermallabelprinter FCCID:2BBWRJK-402A JK-402ATestSetupPhotos Radiatedemission30MHz~1GHz Radiatedemissionabove1GHz Conductedemission