2BBX7APLUSRc Quadcopter

Miami Labs, Inc. 2916 N. Miami Ave, Suite 1100, Miami, FL 33127, USA Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-17-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BBX7APLUS [Miami Labs, Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Lucas Machado)

Miami Labs, Inc. 2916 N. Miami Ave, Suite 1100, Miami, FL 33127, USA Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-17-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BBX7APLUS [Miami Labs, Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Lucas Machado)

Miami Labs, Inc. 2916 N. Miami Ave, Suite 1100, Miami, FL 33127, USA 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process FCC ID: 2BBX7APLUS 2.911(d)(7) USA Designated Agent for Service of Process We, [Miami Labs, Inc.] (“the applicant”) designate [Miami Labs, Inc.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: Miami Labs, Inc. Address: 2916 N. Miami Ave, Suite 1100, Miami, FL 33127, USA Contact Name: Lucas Machado Telephone No: 786 570 4567 Email: [email protected] FRN: 0033974502 Signature: Date: Jul. 17, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-comm unications-supply-chain-through-the

Miami Labs, Inc. 2916 N. Miami Ave, Suite 1100, Miami, FL 33127, USA Agent Authorization Company: Miami Labs, Inc. Address: 2916 N. Miami Ave, Suite 1100, Miami, FL 33127, USA Product Name: Rc Quadcopter Model Number(s): X7 Ranger PLUS Product Description: Rc Quadcopter We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-07-18 Name: Lucas Machado Company: Miami Labs, Inc.

FCC Software Configuration Control Declaration Rev1.1.docx Miami Labs, Inc. 2916 N. Miami Ave, Suite 1100, Miami, FL 33127, USA FCC Software Configuration Control Declaration Date: Jul. 18, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Rc Quadcopter / X7 Ranger PLUS Regarding FCC Country Code Selection guidelines identified in KDB 594280 v02r01. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Lucas Machado Date: Jul. 18, 2023 Signature of applicant

Miami Labs, Inc. 2916 N. Miami Ave, Suite 1100, Miami, FL 33127, USA Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-07-17 Subject; Request for Confidentiality FCC ID: 2BBX7APLUS To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Software Security Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Lucas Machado

Report No.: AGC15798230670AP03 Page 1 of 4 EXTERNAL PHOTOS ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC15798230670AP03 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC15798230670AP03 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC15798230670AP03 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID :2BBX7APLUS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label size: 4cm*5cm

Report No.: AGC15798230670AP03 Page 1 of 14 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC15798230670AP03 Page 2 of 14 OPEN VIEW OF EUT (FIGURE 3) OPEN VIEW OF EUT (FIGURE 4) Report No.: AGC15798230670AP03 Page 3 of 14 OPEN VIEW OF EUT (FIGURE 5) OPEN VIEW OF EUT (FIGURE 6) Report No.: AGC15798230670AP03 Page 4 of 14 OPEN VIEW OF EUT (FIGURE 7) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC15798230670AP03 Page 5 of 14 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) GFSK 2.4G RX Report No.: AGC15798230670AP03 Page 6 of 14 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) GPS Antenna Report No.: AGC15798230670AP03 Page 7 of 14 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC15798230670AP03 Page 8 of 14 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) Report No.: AGC15798230670AP03 Page 9 of 14 INTERNAL VIEW OF EUT (FIGURE 10) INTERNAL VIEW OF EUT (FIGURE 11) Report No.: AGC15798230670AP03 Page 10 of 14 INTERNAL VIEW OF EUT (FIGURE 11) INTERNAL VIEW OF EUT (FIGURE 12) Report No.: AGC15798230670AP03 Page 11 of 14 INTERNAL VIEW OF EUT (FIGURE 13) INTERNAL VIEW OF EUT (FIGURE 14) 5G WIFI Antenna 1 5G WIFI Antenna 2 Report No.: AGC15798230670AP03 Page 12 of 14 INTERNAL VIEW OF EUT (FIGURE 15) INTERNAL VIEW OF EUT (FIGURE 16) Report No.: AGC15798230670AP03 Page 13 of 14 INTERNAL VIEW OF EUT (FIGURE 17) INTERNAL VIEW OF EUT (FIGURE 18) Report No.: AGC15798230670AP03 Page 14 of 14 INTERNAL VIEW OF EUT (FIGURE 19) ****************************************End of Report*************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION FCC ID 2BBX7APLUS Product Description Rc Quadcopter Model Name X7 Ranger PLUS Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Others Device Category Portable (<20cm separation) Mobile (≥20cm separation) Antenna Diversity Single antenna Multiple antennas Max. Output Power ANT1:IEEE 802.11a(HT20): 8.25dBm; ANT2:IEEE 802.11a(HT20): 7.83dBm; Antenna Gain 5GHz WIFI: Antenna 1: 3.74dBi, Antenna 2: 3.74dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Evaluation Result Pass 2. PORTABLE DEVICE EVALUATION METHOD AND LIMIT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [if(GHz)] s 3.0 for 1-g SAR and ñ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz.  Power and distance are rounded to the nearest mW and mm before calculation.  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm) ( f(MHz)/150)] mW, at 100MHz to 1500 MHz; b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)-10] mW at > 1500 MHz and ≤6 GHz; 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by 1/2 for test separation distances ñ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. 3. MOBILE DEVICE EVALUATION METHOD AND LIMIT Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f= Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirement for mobile and portable transmitters. S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. MEASUREMENT RESULT A minimum test separation distance ≥ 20 cm is required between the antenna and radiating structures of the device and nearby persons to apply mobile device exposure limits. The distance must be at least 20 cm and fully supported by the operating and installation configurations of the transmitter and its antenna(s), according to the source-based time-averaged maximum power requirements of § 2.1091(d)(2). In cases where cable losses or other attenuations are applied to determine compliance, the most conservative operating configurations and exposure conditions must be evaluated. 5G WLAN antenna 1: Antenna Gain=3.74dBi (Numeric 2.37), π=3.14 5G WLAN antenna 2: Antenna Gain=3.74dBi (Numeric 2.37), π=3.14 Note： 1. Calculate the SAR test to eliminate thresholds from chapter 2 conditions "3" formula. 2. Max Power (mW) = 10^ (Max power (dBm)/10) 3. This device does not support multi -launch mode when the wireless function is evaluated. Test Mode Test Frequency (MHz) Max.Output Power (dBm) Max.Output Power (mW) Power Density (mW/cm 2 ) Measurement Limit (mW/cm 2 ) 5GWIFI Ant 1 5180 8.25 6.68 0.003147389 1 5GWIFI Ant 2 5240 7.83 6.07 0.002857264 1 5GWIFI MIMO 5240 11.04 12.71 0.005983432 1

Shenzhen Deweima COMMUNICATION Equipment Co., LTD 1 Product specification acknowledgement Dwima Antenna Laboratory Shenzhen R&D Center Mobile communication terminal antenna Client Name：LE WEI Gray coaxial + one generation terminal + heat shrinkable tub product name：D810-2001 5.8Gantenna（Single copper pipe+1.13*270MM e） 1.ANT.ANT270451200 material code： 2 Party of contract R Date: May 31, 2022 Fstructureauditquality Address: 3 / F, Friendship Building, 23 District, Chuangye 2nd Road, Baoan, Shenzhen customer s (Behind Ping An Bank at Honglang North Exit B) ide Date: conclusionConfirmorauditor Shenzhen Deweima COMMUNICATION Equipment Co., LTD 2 电话:0755-278857390755-27885839-800 1.goal The specifications and test methods of mobile communication terminal antenna products produced by Shenzhen Deweima Communication Equipment Co., Ltd. are standardized to avoid errors caused by different test conditions and methods. 2.Overview of product categories and product models 2.1 category single antenna 2.2 Product Model Overview This report mainly Outlines the electrical results of the antenna designed by the 5.8G antenna project. The designed frequency band of this antenna is :5150~5850MHz band. 3.Technical indicators and equipment 3.1technical index Product electrical performance index Frequency Range 5150~5850MHz VSWR 5150~5850MHz<2.0 antenna gain 5150~5850MHz :3.78dBi radiant efficiency 5150~5850MHz>50% impedance 50ohm Product Material Description Copper pipe + coaxial line + one generation terminal Product Environment Description operating temperature -30 ̊C~+85 ̊C storage temperature -30 ̊C~+85 ̊C The antenna of this mobile communication terminal is Shenzhen Deweima COMMUNICATION Equipment Co., LTD 3 3.2 apparatus 4.Description of matching circuit: Our company did not modify the matching circuit of the antenna Antenna E3E1 ElementValueVender E1(0402) E2(0402) E3(0402) RFModule E2 Shenzhen Deweima COMMUNICATION Equipment Co., LTD 4 驻波比 （VSWR 5.Antenna electrical performance parameters (VSWR, gain, efficiency, pattern) ) 效率与增益 （Efficien cyand Gain) Shenzhen Deweima COMMUNICATION Equipment Co., LTD 5 E1 面方向 图(The orientat ion map of the E1 plane ) E2 面方向 图(The orientat ion map of the E2 plane ) Shenzhen Deweima COMMUNICATION Equipment Co., LTD 6 E3 面方向 图(The orientat ion map of the E3 plane ) 3D方向图 （3D Pattern) Shenzhen Deweima COMMUNICATION Equipment Co., LTD 7 5.product structure diagram： Shenzhen Deweima COMMUNICATION Equipment Co., LTD 8 6.Product physical drawing： 7.manner of packing： Shipped in bags

Page 1 of 51 FCC Test Report Report No.: AGC15798230670FE06 FCC ID : 2BBX7APLUS APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Rc Quadcopter BRAND NAME : N/A MODEL NAME : X7 Ranger PLUS APPLICANT : Miami Labs, Inc. DATE OF ISSUE : Jul. 12, 2023 STANDARD(S) : FCC Part 15 Subpart E §15.407 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15798230670FE06 Page 2 of 51 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 12, 2023 Valid Initial Release Report No.: AGC15798230670FE06 Page 3 of 51 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS....................................................................................................... 7 2.3. RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................... 8 2.4. TEST METHODOLOGY ............................................................................................................................. 8 2.5. SPECIAL ACCESSORIES ......................................................................................................................... 8 2.6. EQUIPMENT MODIFICATIONS ................................................................................................................ 8 2.7. ANTENNA REQUIREMENT ...................................................................................................................... 8 2.8. DESCRIPTION OF AVAILABLE ANTENNAS ........................................................................................... 9 3. TEST ENVIRONMENT ................................................................................................................................... 10 3.1 ADDRESS OF THE TEST LABORATORY ............................................................................................... 10 3.2 TEST FACILITY ......................................................................................................................................... 10 3.3 ENVIRONMENTAL CONDITIONS ............................................................................................................ 11 3.4 MEASUREMENT UNCERTAINTY ............................................................................................................ 11 3.5 LIST OF EQUIPMENTS USED ................................................................................................................. 12 4. DESCRIPTION OF TEST MODES ................................................................................................................. 13 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 14 5.1. CONFIGURATION OF EUT SYSTEM ..................................................................................................... 14 5.2. EQUIPMENT USED IN EUT SYSTEM .................................................................................................... 14 5.3. SUMMARY OF TEST RESULTS ............................................................................................................. 14 6. RF OUTPUT POWER MEASUREMENT........................................................................................................ 15 6.1 MEASUREMENT LIMITS ......................................................................................................................... 15 6.2 MEASUREMENT PROCEDURE .............................................................................................................. 15 6.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) .................................................. 16 6.4 MEASUREMENT RESULT ....................................................................................................................... 16 7. 6DB&26DB BANDWIDTH MEASUREMENT ................................................................................................ 17 7.1 MEASUREMENT LIMITS ......................................................................................................................... 17 7.2 MEASUREMENT PROCEDURE .............................................................................................................. 17 7.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) .................................................. 17 7.4 MEASUREMENT RESULTS ..................................................................................................................... 18 8. POWER SPECTRAL DENSITY MEASUREMENT ........................................................................................ 22 8.1 MEASUREMENT LIMITS ......................................................................................................................... 22 8.2 MEASUREMENT PROCEDURE .............................................................................................................. 22 8.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) .................................................. 22 8.4 MEASUREMENT RESULT ....................................................................................................................... 23 Report No.: AGC15798230670FE06 Page 4 of 51 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 27 9.1 MEASUREMENT LIMIT ............................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC15798230670AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC15798230670AP02 Page 2 of 2 RF CONDUCTED TEST SETUP ****************************************End of Report*************************************