2BBX9S17262318Tube Filling Machine

Jroll X10 User Manual Jroll X10 User Manual 2023 X10, X10 Basics, X10 Colour, X10 Plus, Applies to Product Models: X10 Special Edition. Jroll X10 User Manual Congratulations! Welcome to the Jroll Family Proof of Purchase & Product Registration Always keep a copy of the sales receipt showing the date of purchase of your Jroll X10. Proof of purchase will assure you of in-warranty service. We recommend you register your Jroll X10 with us to ensure you enjoy our full warranty. More on our Warranty can be found at the end of this manual. You can register your Jroll X10 by visiting jroll.com/welcome Read this user manual carefully before you use the machine and save the manual for future reference. on your Jroll X10 purchase Jroll X10 User Manual Table of Contents 1. Symbols – Explanation 4 Important Basic Rules 5 Safety Recommendations 5 Caution 6 Electromagnetic fields (EMF) 6 Recycling 6 2. Introduction 7 3. What’s in the Box 7 4. Functional Overview 8 5. First Time Use 12 Unboxing 12 Charging the Battery 12 Turning ON the Jroll X10 12 Loading the roll X10 with Paper Cones 13 Insert and Weigh your Material 14 Grind & Mix 14 Roll & ENJOY 14 6. Settings Mod 15 Stack 15 Level 15 Blue 15 7. Standby & Lock 15 Standby Mode 15 Lock 15 8. The Menu 16 Main Menu 16 Settings 16 Features 16 Messages 16 Troubleshoot 16 9. Cleaning & Maintenance 17 Cleaning the Main body 19 Cleaning the Grind & Mix unit 20 Removing the Bottom Tray 21 Reassembling & Inserting the Grind & Mix unit 21 10. Universal Charger 22 11. Service 23 12. Intended Use 23 13. Jroll APP 23 14. Troubleshooting 24 CHECK 24 STUCK 24 CHARGE ME 24 LOCK 24 BLUE 24 In Case of Faults 24 15. Technical Specifications 24 16. Certifications 25 The Jroll X10 complies with the following EC Directives 25 Distributor & Service Center 25 17. Warranty & Liability 26 Warranty 26 Exclusions and Limitations 26 Return Policy 27 Limitation of Liability 27 Counterfeiting 27 Jroll X10 User Manual 1. Symbols – Explanation Warning! To avoid injuries, it is important you observe the instructions marked with this symbol. Safety Recommendation! To avoid damage to the equipment, it is important you observe the instructions marked with this symbol. Note/Tip! This symbol gives you technical information or useful tips regarding the Jroll X10. Protect from direct sunlight and heat sources (such as ovens, heaters, etc.). WARNING Choking Hazard: Small parts. Not intended for children under 3 years. Han- dle with care. Use with adult supervision. This appliance can be used by children aged from 8 years and above and persons with re- duced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. WARNING Cut Hazard - Contact may result in injury. Always keep blades away from fingers and body. Handle with care. Keep out of reach of children. The machine was introduced after 13 August 2005. It may not be disposed of in normal household waste. The X on the bin indicates the necessity of disposing of this machine separately. The machine contains a built-in rechargeable lithium-ion battery that must be discharged before disposal. Protect against water, moisture and humidity. When this symbol is shown, water may be used for cleaning a specific component(s) of the Jroll X10. When this symbol is shown, the specific component(s) can be cleaned in a dishwasher. 4 Jroll X10 User Manual Important Basic Rules ■Download the current detailed version of the User Manual from www.jroll.com. ■Read these instructions carefully and completely before operating the Jroll X10 and USB-C Charger. ■Always follow the instructions in the User Manual when using and servicing the Jroll X10. ■For their safety, do not allow children to play with the machine. ■The Jtubes contain small parts that can cause choking. Keep out of reach of children. ■Do not operate the machine unattended. ■Do not expose your Jroll X10 to extremely high or low temperatures. ■Do not store your Jroll X10 or any of its components in or near heat sources. ■Do not use your Jroll X10 if it becomes immersed in any liquid. ■Do not expose the machine, charger and USB-C Cable to water, moisture and humidity. ■Never use any accessories or parts from other manufacturers or that Jroll does not specifically recommend. If you use such accessories or parts, your warranty becomes invalid. ■Do not use the machine, charger, and USB-C Cable in an inappropriate, incorrect or unreasonable manner. The manufacturer does not accept any responsibility for any damage resulting from this. Safety Recommendations Risk of Injury ■Before you connect the machine to the power, make sure that the voltage indicated on the charger corresponds to the local power voltage. ■Before any maintenance work and during thunderstorms, the Jroll X10 and USB-C Cable must be switched off and disconnected from the power supply. ■Make sure that the USB-C Cable is not damaged by bending, crushing or pulling. ■Do not use your Jroll X10 if it appears to be damaged, broken or is operating in an unusual or erratic manner. ■If the charger or USB-C Cable is damaged, you must have it replaced by Jroll, a service center authorized by Jroll, or similarly qualified persons to avoid a hazard. ■Do not use multiple sockets and/or extension cables. Never connect this machine to a timer switch, to avoid a hazardous situation. ■Any attempt to repair a damage yourself will invalidate the warranty. For more, read everything about our Warranty section of this manual. ■Do not disassemble or tamper with your Jroll X10. Any inappropriate, incorrect, or irresponsible use will void any warranty and can result in serious injury. ■Be careful when you handle the Grind & Mix unit, the blades are very sharp. ■If residue of spices or herbs sticks to the wall of the Grind & Mix unit, remove the unit from the Jroll X10 before cleaning. More can be found in the Clea…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. Address E13 OF A, 3RD FLOOR, ANNEX BUILDING, NO.188, LINHE MIDDLE ROAD, TIANHE DISTRIC, GUANGZHOU 510610, China Grantee Code 2BBX9 FCC ID 2BBX9S17262318 Authorized Contact Name FENG XIA MA Contact Email [email protected] Contact Phone +86 13902271860 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [ GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. ] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [ GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. ] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2023-7-11 Print Name: FENG XIA MA Title: GM *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-07-11 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. Company Name: United Consulting Technology Services Co., Ltd. Grantee Code: 2BBX9 FRN 0033495714 Contact Name: FENG XIA MA Contact Name: David Wu Address: E13 OF A, 3RD FLOOR, ANNEX BUILDING, NO.188, LINHE MIDDLE ROAD, TIANHE DISTRIC, GUANGZHOU 510610, China Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY CA 91748 United States City/Province/Zip: City/Province/Zip: Telephone: +86 13902271860 Telephone: (626) 217-4022 Fax: +86 20 38782293 Fax: n/a Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2BBX9S17262318 ATTN: Director of Certification: We, GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. and United Consulting Technology Services Co., Ltd. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. and United Consulting Technology Services Co., Ltd. acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. U.S. designated agent Name (Printed): FENG XIA MA Name (Printed): David Wu Title: GM Title: CEO Signature: Signature:

GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. Date: 11/07/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2BBX9S17262318 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. This authorization is valid until further written notice from the applicant. Print Name: FENG XIA MA Title: GM Signature: On behalf of Company: GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. Telephone: +86 13902271860 E-mail: [email protected]

GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. Date: 11/07/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 From: Regarding: Confidentiality Request regarding application for FCC ID: 2BBX9S17262318 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Print Name: FENG XIA MA Title: GM Signature: On behalf of Company: GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. Telephone: +86 13902271860 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 6 External Photos for SZCR2306001954AT FCC ID: 2BBX9S17262318 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 6 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 6 of 6

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 7 Internal Photos for SZCR2306001954AT FCC ID: 2BBX9S17262318 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 7 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 7 of 7 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600195403 Page: 1 of 10 Keny Xu EMC Laboratory Manager 1 Cover page RF Exposure Report Application No.: SZCR2306001954AT Applicant: GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. Address of Applicant: E13 OF A, 3RD FLOOR, ANNEX BUILDING, NO.188, LINHE MIDDLE ROAD, TIANHE DISTRIC, GUANGZHOU 510610 China Manufacturer: Zhongshan Leige Photoelectric Co., Ltd. Address of Manufacturer: Yulian Road, Yusheng Village, Ji East One, Xiaolan Town, Zhongshan City, Guangdong Province, China Factory: Zhongshan Leige Photoelectric Co., Ltd. Address of Factory: Yulian Road, Yusheng Village, Ji East One, Xiaolan Town, Zhongshan City, Guangdong Province, China Equipment Under Test (EUT): EUT Name: Tube Filling Machine Model No.: X10, X10 Basics, X10 Plus, X10 Special Edition, X10 Colour ♣ ♣ Please refer to section 2 of this report which indicates which model was actual tested and which were electrically identical. Trade Mark: Jroll FCC ID: 2BBX9S17262318 Standards: FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-06-21 Date of Test: 2023-06-25 to 2023-08-24 Date of Issue: 2023-09-08 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600195403 Page: 2 of 10 2 Version Revision Record Version Chapter Date Modifier Remark 01 2023-09-08 Original Authorized for issue by: Leo Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600195403 Page: 3 of 10 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF E.U.T. ...................................................................................................... 4 4.2 DETAILS OF EUT ............................................................................................................................... 4 4.3 SEPARATION DISTANCE...................................................................................................................... 5 4.4 TEST LOCATION ................................................................................................................................ 6 4.5 TEST FACILITY .................................................................................................................................. 6 4.6 DEVIATION FROM STANDARDS ............................................................................................................ 6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 6 4.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER .......................................................................... 6 5 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .................................................................. 7 5.1 BLANKET 1 MW BLANKET EXEMPTION.................................................................................................. 7 5.2 MPE-BASED EXEMPTION.................................................................................................................... 7 5.3 SAR-BASED EXEMPTION .................................................................................................................... 8 6 MEASUREMENT AND CALCULATION ................................................................................................ 10 6.1 MAXIMUM TRANSMIT POWER ............................................................................................................. 10 6.2 RF EXPOSURE CALCULATION ........................................................................................................... 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600195403 Page: 4 of 10 4 General Information 4.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 4.2 Details of EUT Power supply: Lithium Ion Battery: DC 7.4V(2*DC 3.7V 3000mAh rechargeable batteries in series which charged by adapter) DC 9V from adapter input AC 230V/50Hz Adapter Model: MKC-0901000DEXD Input: 100-240V~, 50/60Hz 0.4A Output: 9.0V/1.0A 9.0W Cable(s): Adapter DC cable: 100cm unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: -2.07dBi Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Declaration of EUT Family Grouping: Model No.: X10, X10 Basics, X10 Plus, X10 Special Edition, X10 Colour Only the model X10 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used and internal wiring and functions were identical for the above models, with only difference on model No.. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600195403 Page: 5 of 10 4.3 Separation Distance Minimum test separation distance: 20cm Remark: This minim…

Text truncated - open the document above for the full version.

PART NUMBER: CBT-RBT11 ANTENNA DESCRIPTION: PCB Antenna VERSION: V1.1 Released Date: 2021.3.21 Manufacturer: Shenzhen Tianditong Electronics Co. Ltd. Manufacturer address: Shenzhen, Baoan District, West Village, iron Gang village, the Peach Garden science and Technology Innovation Park, second sub Park, A building, 2-3 floor Antenna size: 9.8*4.5mm 1. Overview This antenna specification describes the RF performance of the WLT8258 module onboard antenna, ensuring that when connected to a 50 ohm source, the VSWR ratio is less than 3 in the 2.4 GHz ISM frequency band, the gain maps in different directions of the antenna, and the antenna efficiency and gain values in different frequency bands. 2. Return loss、VSWR Return lossVSWR 3.Direction and Gain Graph gain：-5.1dBi gain：-4.4dBi gain ： -4.8dBi 4. Antenna gain meter Frequency / MHzEfficiency / dBEfficiency / %Gain/ dBi 2400-8.4914.16-2.92 2405-8.4114.42-2.99 2410-8.3514.62-3.12 2415-8.2814.86-2.67 2420-8.3214.72-3.11 2425-8.2514.96-2.75 2430-8.115.49-2.67 2435-8.2315.03-3.14 2440-8.1815.21-2.19 2445-8.0115.81-2.44 2450-8.1115.45-2.45 2455-8.0615.63-2.07 2460-8.1215.42-2.78 2465-8.2215.07-2.25 2470-815.85-2.36 2475-8.2514.96-2.84 2480-8.3914.49-2.25 2485-8.2415-2.53 2490-8.4414.32-2.93 2495-8.4814.19-2.97 2500-8.5613.93-3.2

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600195402 Page: 1 of 77 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2306001954AT Applicant: GUANGZHOU HUNG FUK INTERNATIONAL TRADING DEVELOPMENT CO., LTD. Address of Applicant: E13 OF A, 3RD FLOOR, ANNEX BUILDING, NO.188, LINHE MIDDLE ROAD, TIANHE DISTRIC, GUANGZHOU 510610 China Manufacturer: Zhongshan Leige Photoelectric Co., Ltd. Address of Manufacturer: Yulian Road, Yusheng Village, Ji East One, Xiaolan Town, Zhongshan City, Guangdong Province, China Factory: Zhongshan Leige Photoelectric Co., Ltd. Address of Factory: Yulian Road, Yusheng Village, Ji East One, Xiaolan Town, Zhongshan City, Guangdong Province, China Equipment Under Test (EUT): EUT Name: Tube Filling Machine Model No.: X10, X10 Basics, X10 Plus, X10 Special Edition, X10 Colour   Please refer to section 2 of this report which indicates which model was actual tested and which were electrically identical. Trade Mark: Jroll FCC ID: 2BBX9S17262318 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-06-21 Date of Test: 2023-06-25 to 2023-08-24 Date of Issue: 2023-09-08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600195402 Page: 2 of 77 Revision Record Version Chapter Date Modifier Remark 01 2023-09-08 Original Authorized for issue by: Leo Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600195402 Page: 3 of 77 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: Model No.: X10, X10 Basics, X10 Plus, X10 Special Edition, X10 Colour Only the model X10 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used and internal wiring and functions were identical for the above models, with only difference on model No.. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600195402 Page: 4 of 77 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 7 4.3 Measurement Uncertainty ............................................................................................................ 7 4.4 Test Location ............................................................................................................................... 8 4.5 Test Facility .................................................................................................................................. 8 4.6 Deviation from Standards ............................................................................................................. 8 4.7 Abnormalities from Standard Conditions ....................................................................................... 8 5 Equipment List ................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ..........................................................................................12 6.1 Antenna Requirement .................................................................................................................12 6.1.1 Test Requirement: ..................................................................................................................12 6.1.2 Conclusion ..............................................................................................................................12 7 Radio Spectrum Matter Test Results ................................................................................................13 7.1 Conducted Peak Output Power ..................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 3 Setup Photos for SZCR2306001954AT FCC ID: 2BBX9S17262318 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 3 Test Setup Photo Radiated Emissions which fall in the restricted bands Radiated Spurious Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Br…

Text truncated - open the document above for the full version.